BUG=76
Change-Id: I8b754ba17b3e0beee425929e4b53785b2e95f0ae
Reviewed-on: https://boringssl-review.googlesource.com/15164
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
When writing tests and BoGo isn't available, it is useful to be able to
configure the set of signature algorithms accepted on the verify side.
Add an API for this.
Change-Id: Ic873189da7f8853e412acd68614df9d9a872a0c8
Reviewed-on: https://boringssl-review.googlesource.com/15125
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This follows up on cedc6f18 by removing support for the
-DBORINGSSL_ENABLE_DHE_TLS compile flag, and the code needed to
support it.
Change-Id: I53b6aa7a0eddd23ace8b770edb2a31b18ba2ce26
Reviewed-on: https://boringssl-review.googlesource.com/14886
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
As a precursor to removing the code entirely later, disable the protocol
by default. Callers must use SSL_CTX_set_min_version to enable it.
This change also makes SSLv3_method *not* enable SSL 3.0. Normally
version-specific methods set the minimum and maximum version to their
version. SSLv3_method leaves the minimum at the default, so we will
treat it as all versions disabled. To help debugging, the error code is
switched from WRONG_SSL_VERSION to a new NO_SUPPORTED_VERSIONS_ENABLED.
This also defines OPENSSL_NO_SSL3 and OPENSSL_NO_SSL3_METHOD to kick in
any no-ssl3 build paths in consumers which should provide a convenient
hook for any upstreaming changes that may be needed. (OPENSSL_NO_SSL3
existed in older versions of OpenSSL, so in principle one may encounter
an OpenSSL with the same settings.)
Change-Id: I96a8f2f568eb77b2537b3a774b2f7108bd67dd0c
Reviewed-on: https://boringssl-review.googlesource.com/14031
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This only works at TLS 1.2 and above as, before TLS 1.2, there is no way
to advertise support for Ed25519 or negotiate the correct signature
algorithm. Add tests for this accordingly.
For now, this is disabled by default on the verifying side but may be
enabled per SSL_CTX. Notably, projects like Chromium which use an
external verifier may need changes elsewhere before they can enable it.
(On the signing side, we can assume that if the caller gave us an
Ed25519 certificate, they mean for us to use it.)
BUG=187
Change-Id: Id25b0a677dcbe205ddd26d8dbba11c04bb520756
Reviewed-on: https://boringssl-review.googlesource.com/14450
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Instead, extract it from the certificate, which is what everyone was
doing anyway. A follow-up change will take advantage of this cleanup to
deduplicate code between signing and verifying for which keys are good
for which signature algorithms.
BUG=188
Change-Id: Ic3f83a6477e8fa53e5e7233f4545f4d2c4b58d01
Reviewed-on: https://boringssl-review.googlesource.com/14565
Reviewed-by: Adam Langley <agl@google.com>
We received an external request to add an option to undo the check added
in 3e51757de2.
Change-Id: Ifdd4b07705f2fa3d781d775d5cd139ea72d36734
Reviewed-on: https://boringssl-review.googlesource.com/14644
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This moves the early data switch to CERT to make this
|SSL_set_SSL_CTX|-proof.
Change-Id: Icca96e76636d87578deb24b2d507cabee7e46a4a
Reviewed-on: https://boringssl-review.googlesource.com/14545
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Previously we only needed to be able to serve P-224 certificates, but
now we anticipate a need to be able to connect and validate them also.
Since this requires advertising support for P-224 in the handshake, we
need to support P-224 ECDHE too.
P-224 support is disabled by default and so clients need to both set the
enabled curves explicitly and set a maximum version of TLS 1.2.
Change-Id: Idc69580f47334e0912eb431a0db0e78ee2eb5bbe
Reviewed-on: https://boringssl-review.googlesource.com/14225
Reviewed-by: Adam Langley <alangley@gmail.com>
Commit-Queue: Adam Langley <alangley@gmail.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=76
Change-Id: I68bc1dce13af9155b385a7b589480aacf02ec0db
Reviewed-on: https://boringssl-review.googlesource.com/14380
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@chromium.org>
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Channel ID is incompatible with 0-RTT, so we gracefully decline 0-RTT
as a server and forbid their combination as a client. We'll keep this
logic around until Channel ID is removed.
Channel ID will be replaced by tokbind which currently uses custom
extensions. Those will need additional logic to work with 0-RTT.
This is not implemented yet so, for now, fail if both are ever
configured together at all. A later change will allow the two to
combine.
BUG=183
Change-Id: I46c5ba883ccd47930349691fb08074a1fab13d5f
Reviewed-on: https://boringssl-review.googlesource.com/14370
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds support on the server and client to accept data-less early
data. The server will still fail to parse early data with any
contents, so this should remain disabled.
BUG=76
Change-Id: Id85d192d8e0360b8de4b6971511b5e8a0e8012f7
Reviewed-on: https://boringssl-review.googlesource.com/12921
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The |select_certificate_cb| return values are somewhat confusing due
to the fact that they don't match the |cert_cb| ones, despite the
similarities between the two callbacks (they both have "certificate" in
the name! well, sort of).
This also documents the error return value (-1) which was previously
undocumented, and it expands the |SSL_CTX_set_select_certificate_cb|
documentation regarding retrial (by shamelessly copying from
|SSL_CTX_set_ticket_aead_method|).
Also updates other scattered documentation that was missed by previous
changes.
Change-Id: Ib962b31d08e6475e09954cbc3c939988b0ba13f7
Reviewed-on: https://boringssl-review.googlesource.com/14245
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I6d07a8e146a925a14dbf5d11b4e8a57ef6eee39c
Reviewed-on: https://boringssl-review.googlesource.com/14244
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This was inadvertently dropped in
59015c365b. Python otherwise configures
P-256 if it assumes our OpenSSL predate's 1.0.2's multi-curve support.
This disables X25519, our preferred curve.
Change-Id: Ibf758583ea53e68c56667f16ee7096656bac719b
Reviewed-on: https://boringssl-review.googlesource.com/14208
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change adds support for setting an |SSL_TICKET_AEAD_METHOD| which
allows a caller to control ticket encryption and decryption to a greater
extent than previously possible and also permits asynchronous ticket
decryption.
This change only includes partial support: TLS 1.3 work remains to be
done.
Change-Id: Ia2e10ebb3257e1a119630c463b6bf389cf20ef18
Reviewed-on: https://boringssl-review.googlesource.com/14144
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This makes its purpose clearer. That the session cache is based on the
initial SSL_CTX is confusing (it's a remnant of OpenSSL's backwards
session resumption ordering), but we're probably stuck with it.
Relatedly, document SSL_set_SSL_CTX better.
Change-Id: I2832efc63f6c959c5424271b365825afc7eec5e4
Reviewed-on: https://boringssl-review.googlesource.com/14204
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
It's more consistent to have the helper function do the check that
its every caller already performs. This removes the error code
SSL_R_LIBRARY_HAS_NO_CIPHERS in favor of SSL_R_NO_CIPHER_MATCH.
Change-Id: I522239770dcb881d33d54616af386142ae41b29f
Reviewed-on: https://boringssl-review.googlesource.com/13964
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows a caller to configure a serving chain without dealing with
crypto/x509.
Change-Id: Ib42bb2ab9227d32071cf13ab07f92d029643a9a6
Reviewed-on: https://boringssl-review.googlesource.com/14126
Commit-Queue: Adam Langley <alangley@gmail.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We'll measure this value to guide what tolerance to use in the 0-RTT
anti-replay mechanism. This also fixes a bug where we were previously
minting ticket_age_add-less tickets on the server. Add a check to reject
all those tickets.
BUG=113
Change-Id: I68e690c0794234234e0d0500b4b9a7f79aea641e
Reviewed-on: https://boringssl-review.googlesource.com/14068
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Previously, the |CRYPTO_BUFFER|-based methods always rejected
certificate chains because none of the current callbacks is suitable to
use. In the medium-term, we want an async callback for this but, for
now, we would like to get Chromium working. Chromium already installs a
no-op callback (except for the logic that was moved into BoringSSL in
a58baaf9e6) and so this hack will suffice
for Chromium.
Change-Id: Ie44b7b32b9e42f503c47b072e958507754136d72
Reviewed-on: https://boringssl-review.googlesource.com/14125
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is an API from OpenSSL 1.1.0 which is a little risky to add ahead
of bumping OPENSSL_VERSION_NUMBER, but anything which currently builds
against BoringSSL already had an #ifdef due to the
ssl_cipher_preference_list_st business anyway.
Bump BORINGSSL_API_VERSION to make it easier to patch envoy for this.
BUG=6
Change-Id: If8307e30eb069bbd7dc4b8447b6e48e83899d584
Reviewed-on: https://boringssl-review.googlesource.com/14067
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Everything has been updated to return the ECDSA curve.
Change-Id: Iee8fafb576c0ff92d9a47304d59cc607b5faa112
Reviewed-on: https://boringssl-review.googlesource.com/14066
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds a CRYPTO_BUFFER getter for the peer certificate chain. Other
things we need for Chromium:
- Verification callback. Ultimately, we want an asynchronous one, but a
synchronous one will do for now.
- Configure client cert chain without X509
I've also removed the historical note about SSL_SESSION serialization.
That was years ago and we've since invalidated all serialized client
sessions.
BUG=671420
Change-Id: I2b3bb010f9182e751fc791cdfd7db44a4ec348e6
Reviewed-on: https://boringssl-review.googlesource.com/14065
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Due to middlebox and ecosystem intolerance, short record headers are going to
be unsustainable to deploy.
BUG=119
Change-Id: I20fee79dd85bff229eafc6aeb72e4f33cac96d82
Reviewed-on: https://boringssl-review.googlesource.com/14044
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This function is a |CRYPTO_BUFFER|-based method for getting the X.509
names from a CertificateRequest.
Change-Id: Ife26f726d3c1a055b332656678c2bc560b5a66ec
Reviewed-on: https://boringssl-review.googlesource.com/14013
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows us to move the code from Chrome into BoringSSL itself.
BUG=126
Change-Id: I04b4f63008a6de0a58dd6c685c78e9edd06deda6
Reviewed-on: https://boringssl-review.googlesource.com/14028
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is the first part to fixing the SSL stack to be 2038-clean.
Internal structures and functions are switched to use OPENSSL_timeval
which, unlike timeval and long, are suitable for timestamps on all
platforms.
It is generally accepted that the year is now sometime after 1970, so
use uint64_t for the timestamps to avoid worrying about serializing
negative numbers in SSL_SESSION.
A follow-up change will fix SSL_CTX_set_current_time_cb to use
OPENSSL_timeval. This will require some coordinating with WebRTC.
DTLSv1_get_timeout is left alone for compatibility and because it stores
time remaining rather than an absolute time.
BUG=155
Change-Id: I1a5054813300874b6f29e348f9cd8ca80f6b9729
Reviewed-on: https://boringssl-review.googlesource.com/13944
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The DTLS stack has two very different APIs for handling timeouts. In
non-blocking mode, timeouts are driven externally by the caller with
DTLSv1_get_timeout. In blocking mode, timeouts are driven by the BIO by
calling a BIO_ctrl with BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT.
The latter is never used by consumers, so remove support for it.
BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT implicitly depends on struct timeval
being used for timestamps, which we would like to remove. Without this,
the only public API which relies on this is the testing-only
SSL_CTX_set_current_time_cb which is BoringSSL-only and we can change at
our leisure.
BUG=155
Change-Id: Ic68fa70afab2fa9e6286b84d010eac8ddc9d2ef4
Reviewed-on: https://boringssl-review.googlesource.com/13945
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows a caller to get an |SSL_METHOD| that is free of crypto/x509.
Change-Id: I088e78310fd3ff5db453844784e7890659a633bf
Reviewed-on: https://boringssl-review.googlesource.com/14009
Reviewed-by: Adam Langley <agl@google.com>
This change converts the CA names that are parsed from a server's
CertificateRequest, as well as the CA names that are configured for
sending to clients in the same, to use |CRYPTO_BUFFER|.
The |X509_NAME|-based interfaces are turned into compatibility wrappers.
Change-Id: I95304ecc988ee39320499739a0866c7f8ff5ed98
Reviewed-on: https://boringssl-review.googlesource.com/13585
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It has no more callers.
Change-Id: I587ccb3b63810ed167febf7a65ba85106d17a300
Reviewed-on: https://boringssl-review.googlesource.com/13911
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Icb01cd3ff88eb3fa8a7d7a1e9ead568ba20eb748
Reviewed-on: https://boringssl-review.googlesource.com/13965
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The new APIs are SSL_CTX_set_strict_cipher_list() and
SSL_set_strict_cipher_list(). They have two motivations:
First, typos in cipher lists can go undetected for a long time, and
can have surprising consequences when silently ignored.
Second, there is a tendency to use superstition in the construction of
cipher lists, for example by "turning off" things that do not actually
exist. This leads to the corrosive belief that DEFAULT and ALL ought
not to be trusted. This belief is false.
Change-Id: I42909b69186e0b4cf45457e5c0bc968f6bbf231a
Reviewed-on: https://boringssl-review.googlesource.com/13925
Commit-Queue: Matt Braithwaite <mab@google.com>
Reviewed-by: Matt Braithwaite <mab@google.com>
Node has since been patched.
Change-Id: If25eecabfc83ef9fd36c531c9ca9db2911de010e
Reviewed-on: https://boringssl-review.googlesource.com/13908
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This reduces us from seven different configuration patterns to six (see
comment #2 of linked bug). I do not believe there is any behavior change
here as SSL_set_SSL_CTX already manually copied the field. It now gives
us a nice invariant: SSL_set_SSL_CTX overrides all and only the
dual-SSL/SSL_CTX options hanging off of CERT.
BUG=123
Change-Id: I1ae06b791fb869917a6503cee41afb2d9be53d89
Reviewed-on: https://boringssl-review.googlesource.com/13865
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I'm not sure why the SSL versions of these functions return int while
the SSL_CTX version returns void. It looks like this dates to
https://boringssl-review.googlesource.com/c/1491/, of which the initial
upload was an SSL_ctrl macro. I guess one of the ints got accidentally
preserved in conversion.
(No existing caller, aside from bssl_shim, checks the result.)
Change-Id: Id54309c1aa03462d520b9a45cdfdefdd2cdd1298
Reviewed-on: https://boringssl-review.googlesource.com/13866
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
0-RTT requires matching the selected ALPN parameters against those in
the session. Stash the ALPN value in the session in TLS 1.3, so we can
recover it.
BUG=76
Change-Id: I8668b287651ae4deb0bf540c0885a02d189adee0
Reviewed-on: https://boringssl-review.googlesource.com/13845
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Recent changes added SSL-level setters to these APIs. Unfortunately,
this has the side effect of breaking SSL_set_SSL_CTX, which is how SNI
is typically handled. SSL_set_SSL_CTX is kind of a weird function in
that it's very sensitive to which of the hodge-podge of config styles is
in use. I previously listed out all the config styles here, but it was
long and unhelpful. (I counted up to 7.)
Of the various SSL_set_SSL_CTX-visible config styles, the sanest seems
to be to move it to CERT. In this case, it's actually quite reasonable
since they're very certificate-related.
Later we may wish to think about whether we can cut down all 7 kinds of
config styles because this is kinda nuts. I'm wondering we should do
CERT => SSL_CONFIG, move everything there, and make that be the same
structure that is dropped post-handshake (supposing the caller has
disavowed SSL_clear and renego). Fruit for later thought. (Note though
that comes with a behavior change for all the existing config.)
Change-Id: I9aa47d8bd37bf2847869e0b577739d4d579ee4ae
Reviewed-on: https://boringssl-review.googlesource.com/13864
Reviewed-by: Martin Kreichgauer <martinkr@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
All the business with rewinding hs->state back or skipping states based
on reuse_message or a skip parameter isn't really worth the trouble for
a debugging callback. With SSL_state no longer exposed, we don't have to
worry about breaking things.
BUG=177
Change-Id: I9a0421f01c8b2f24c80a6b3e44de9138ea023f58
Reviewed-on: https://boringssl-review.googlesource.com/13829
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I doubt this matters, but this seems a little odd. In particular, this
avoids info_callback seeing the SSL_ST_OK once we stop switching
hs->state back and forth.
BUG=177
Change-Id: Ied39c0e94c242af9d5d0f26795d6e0f2f0b12406
Reviewed-on: https://boringssl-review.googlesource.com/13827
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Code which manages to constrain itself on this will limit our ability to
rework the handshake. I believe, at this point, we only need to expose
one bit of information (there's some code that compares SSL_state to
SSL_ST_OK), if even that.
BUG=177
Change-Id: Ie1c43006737db0b974811f1819755c629ae68e7b
Reviewed-on: https://boringssl-review.googlesource.com/13826
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
|SSL_SESSION_from_bytes| now takes an |SSL_CTX*|, from which it uses the
|X509_METHOD| and buffer pool. This is our API so we can do this.
This also requires adding an |SSL_CTX*| argument to |SSL_SESSION_new|
for the same reason. However, |SSL_SESSION_new| already has very few
callers (and none in third-party code that I can see) so I think we can
get away with this.
Change-Id: I1337cd2bd8cff03d4b9405ea3146b3b59584aa72
Reviewed-on: https://boringssl-review.googlesource.com/13584
Reviewed-by: Adam Langley <alangley@gmail.com>
Commit-Queue: Adam Langley <alangley@gmail.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Right now the only way to set an SCT list is the per-context function
SSL_CTX_set_signed_cert_timestamp_list. However this assumes that all the
SSLs generated from a SSL_CTX share the same SCT list, which is wrong.
In order to avoid memory duplication in case SSL_CTX has its own list, a
CRYPTO_BUFFER is used for both SSL_CTX and SSL.
Change-Id: Id20e6f128c33cf3e5bff1be390645441be6518c6
Reviewed-on: https://boringssl-review.googlesource.com/13642
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
As previously discussed, it turns out we don't actually need this, so
there's no point in keeping it.
Change-Id: If549c917b6bd818cd36948e37cb7839c8d122b1a
Reviewed-on: https://boringssl-review.googlesource.com/13641
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Using the arg parameter does not work well. This is purely an
SSL_CTX-level callback, not an SSL-level one.
Change-Id: Ib968807efbe7dd08e71cea1c4d8034a52c729d45
Reviewed-on: https://boringssl-review.googlesource.com/13629
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is purely to support curl, which now has HTTPS proxy support that,
sadly, uses the BIO SSL. Don't use the BIO SSL for anything else.
Change-Id: I9ef6c9773ec87a11e0b5a93968386ac4b351986d
Reviewed-on: https://boringssl-review.googlesource.com/13600
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
In TLS 1.2, resumption's benefits are more-or-less subsumed by False
Start. TLS 1.2 resumption lifetime is bounded by how much traffic we are
willing to encrypt without fresh key material, so the lifetime is short.
Renewal uses the same key, so we do not allow it to increase lifetimes.
In TLS 1.3, resumption unlocks 0-RTT. We do not implement psk_ke, so
resumption incorporates fresh key material into both encrypted traffic
(except for early data) and renewed tickets. Thus we are both more
willing to and more interested in longer lifetimes for tickets. Renewal
is also not useless. Thus in TLS 1.3, lifetime is bound separately by
the lifetime of a given secret as a psk_dhe_ke authenticator and the
lifetime of the online signature which authenticated the initial
handshake.
This change maintains two lifetimes on an SSL_SESSION: timeout which is
the renewable lifetime of this ticket, and auth_timeout which is the
non-renewable cliff. It also separates the TLS 1.2 and TLS 1.3 timeouts.
The old session timeout defaults and configuration apply to TLS 1.3, and
we define new ones for TLS 1.3.
Finally, this makes us honor the NewSessionTicket timeout in TLS 1.3.
It's no longer a "hint" in 1.3 and there's probably value in avoiding
known-useless 0-RTT offers.
BUG=120
Change-Id: Iac46d56e5a6a377d8b88b8fa31f492d534cb1b85
Reviewed-on: https://boringssl-review.googlesource.com/13503
Reviewed-by: Adam Langley <agl@google.com>
