The existing logic gets confused in a number of cases around close_notify vs.
fatal alert. SSL_shutdown, while still pushing to the error queue, will fail to
notice alerts. We also get confused if we try to send a fatal alert when we've
already sent something else.
Change-Id: I9b1d217fbf1ee8a9c59efbebba60165b7de9689e
Reviewed-on: https://boringssl-review.googlesource.com/7952
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL used to only forbid it on the server in plain PSK and allow it on the
client. Enforce it properly on both sides. My read of the rule in RFC 5246 ("A
non-anonymous server can optionally request a certificate") and in RFC 4279
("The Certificate and CertificateRequest payloads are omitted from the
response.") is that client auth happens iff we're certificate-based.
The line in RFC 4279 is under the plain PSK section, but that doesn't make a
whole lot of sense and there is only one diagram. PSK already authenticates
both sides. I think the most plausible interpretation is that this is for
certificate-based ciphers.
Change-Id: If195232c83f21e011e25318178bb45186de707e6
Reviewed-on: https://boringssl-review.googlesource.com/7942
Reviewed-by: David Benjamin <davidben@google.com>
The specification, sadly, did not say that servers MUST NOT send it, only that
they are "not expected to" do anything with the client extension. Accordingly,
we decided to tolerate this. Add a test for this so that we check this
behavior.
This test also ensures that the original session's value for it carries over.
Change-Id: I38c738f218a09367c9d8d1b0c4d68ab5cbec730e
Reviewed-on: https://boringssl-review.googlesource.com/7860
Reviewed-by: Adam Langley <agl@google.com>
This allows an application to override the default of 1 second, which
is what's instructed in RFC 6347 but is not an absolute requirement.
Change-Id: I0bbb16e31990fbcab44a29325b6ec7757d5789e5
Reviewed-on: https://boringssl-review.googlesource.com/7930
Reviewed-by: David Benjamin <davidben@google.com>
The SSL tests are fairly different from most test suites. Add some high-level
documentation so people know where to start.
Change-Id: Ie5ea108883dca82675571a3025b3fbc4b9d66da9
Reviewed-on: https://boringssl-review.googlesource.com/7890
Reviewed-by: Adam Langley <agl@google.com>
The DTLS bbio logic is rather problematic, but this shouldn't make things
worse. In the in-handshake case, the new code merges the per-message
(unchecked) BIO_flush calls into one call at the end but otherwise the BIO is
treated as is. Otherwise any behavior around non-block writes should be
preserved.
In the post-handshake case, we now install the buffer when we didn't
previously. On write error, the buffer will have garbage in it, but it will be
discarded, so that will preserve any existing retry behavior. (Arguably the
existing retry behavior is a bug, but that's another matter.)
Add a test for all this, otherwise it is sure to regress. Testing for
record-packing is a little fuzzy, but we can assert ChangeCipherSpec always
shares a record with something.
BUG=57
Change-Id: I8603f20811d502c71ded2943b0e72a8bdc4e46f2
Reviewed-on: https://boringssl-review.googlesource.com/7871
Reviewed-by: Adam Langley <agl@google.com>
This is just kind of a silly thing to do. NSS doesn't allow them either. Fatal
alerts would kill the connection regardless and warning alerts are useless. We
previously stopped accepting fragmented alerts but still allowed them doubled
up.
This is in preparation for pulling the shared alert processing code between TLS
and DTLS out of read_bytes into some common place.
Change-Id: Idbef04e39ad135f9601f5686d41f54531981e0cf
Reviewed-on: https://boringssl-review.googlesource.com/7451
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
These only affect the tests.
Change-Id: If22d047dc98023501c771787b485276ece92d4a2
Reviewed-on: https://boringssl-review.googlesource.com/7573
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise it's confusing if you mistype the test name.
Change-Id: Idf32081958f85f3b5aeb8993a07f6975c27644f8
Reviewed-on: https://boringssl-review.googlesource.com/7500
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Align all unexpected messages on SSL_R_UNEXPECTED_MESSAGE. Make the SSL 3.0
case the exceptional case. In doing so, make sure the SSL 3.0
SSL_VERIFY_FAIL_IF_NO_PEER_CERT case has its own test as that's a different
handshake shape.
Change-Id: I1a539165093fbdf33e2c1b25142f058aa1a71d83
Reviewed-on: https://boringssl-review.googlesource.com/7421
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If we're doing substring matching, we should at least include the delimiter.
Change-Id: I98bee568140d0304bbb6a2788333dbfca044114c
Reviewed-on: https://boringssl-review.googlesource.com/7420
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS, you never skip the Certificate message. It may be empty, but its
presence is determined by CertificateRequest. (This is sensible.)
In SSL 3.0, the client omits the Certificate message. This means you need to
probe and may receive either Certificate or ClientKeyExchange (thankfully,
ClientKeyExchange is not optional, or we'd have to probe at ChangeCipherSpec).
We didn't have test coverage for this, despite some of this logic being a
little subtle asynchronously. Fix this.
Change-Id: I149490ae5506f02fa0136cb41f8fea381637bf45
Reviewed-on: https://boringssl-review.googlesource.com/7419
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also add no-certificate cases to the state machine coverage tests.
Change-Id: I88a80df6f3ea69aabc978dd356abcb9e309e156f
Reviewed-on: https://boringssl-review.googlesource.com/7417
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If a Read or Write blocks for too long, time out the operation. Otherwise, some
kinds of test failures result in hangs, which prevent the test harness from
progressing. (Notably, OpenSSL currently has a lot of those failure modes and
upstream expressed interest in being able to run the tests to completion.)
Go's APIs want you to send an absolute timeout, to avoid problems when a Read
is split into lots of little Reads. But we actively want the timer to reset in
that case, so this needs a trivial adapter.
The default timeout is set at 15 seconds for now. If this becomes a problem, we
can extend it or build a more robust deadlock detector given an out-of-band
channel (shim tells runner when it's waiting on data, abort if we're also
waiting on data at the same time). But I don't think we'll need that
complexity. 15 seconds appears fine for both valgrind and running tests on a
Nexus 4.
BUG=460189
Change-Id: I6463fd36058427d883b526044da1bbefba851785
Reviewed-on: https://boringssl-review.googlesource.com/7380
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
I went with NID_x25519 to match NID_sha1 and friends in being lowercase.
However, upstream seems to have since chosen NID_X25519. Match their
name.
Change-Id: Icc7b183a2e2dfbe42c88e08e538fcbd242478ac3
Reviewed-on: https://boringssl-review.googlesource.com/7331
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I9540c931b6cdd4d65fa9ebfc52e1770d2174abd2
Reviewed-on: https://boringssl-review.googlesource.com/7330
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This can be used to get some initial corpus for fuzzing.
Change-Id: Ifcd365995b54d202c4a2674f49e7b28515f36025
Reviewed-on: https://boringssl-review.googlesource.com/7289
Reviewed-by: Adam Langley <agl@google.com>
It's useful to make sure our fuzzer mode works. Not all tests pass, but most
do. (Notably the negative tests for everything we've disabled don't work.) We
can also use then use runner to record fuzzer-mode transcripts with the ciphers
correctly nulled.
Change-Id: Ie41230d654970ce6cf612c0a9d3adf01005522c6
Reviewed-on: https://boringssl-review.googlesource.com/7288
Reviewed-by: Adam Langley <agl@google.com>
Both sides' signature and Finished checks still occur, but the results
are ignored. Also, all ciphers behave like the NULL cipher.
Conveniently, this isn't that much code since all ciphers and their size
computations funnel into SSL_AEAD_CTX.
This does carry some risk that we'll mess up this code. Up until now, we've
tried to avoid test-only changes to the SSL stack.
There is little risk that anyone will ship a BORINGSSL_UNSAFE_FUZZER_MODE build
for anything since it doesn't interop anyway. There is some risk that we'll end
up messing up the disableable checks. However, both skipped checks have
negative tests in runner (see tests that set InvalidSKXSignature and
BadFinished). For good measure, I've added a server variant of the existing
BadFinished test to this CL, although they hit the same code.
Change-Id: I37f6b4d62b43bc08fab7411965589b423d86f4b8
Reviewed-on: https://boringssl-review.googlesource.com/7287
Reviewed-by: Adam Langley <agl@google.com>
Found by libFuzzer combined with some experimental unsafe-fuzzer-mode patches
(to be uploaded once I've cleaned them up a bit) to disable all those pesky
cryptographic checks in the protocol.
Change-Id: I9153164fa56a0c2262c4740a3236c2b49a596b1b
Reviewed-on: https://boringssl-review.googlesource.com/7282
Reviewed-by: Adam Langley <agl@google.com>
If LeakSanitizer fires something on a test that's expected to fail, runner will
swallow it. Have stderr output always end in a "--- DONE ---" marker and treat
all output following that as a test failure.
Change-Id: Ia8fd9dfcaf48dd23972ab8f906d240bcb6badfe2
Reviewed-on: https://boringssl-review.googlesource.com/7281
Reviewed-by: Adam Langley <agl@google.com>
Otherwise it still thinks this is an RFC 5114 prime and kicks in the (now
incorrect) validity check.
Change-Id: Ie78514211927f1f2d2549958621cb7896f68b5ce
Reviewed-on: https://boringssl-review.googlesource.com/7050
Reviewed-by: Adam Langley <agl@google.com>
Take the mappings for MD5 and SHA-224 values out of the code altogether. This
aligns with the current TLS 1.3 draft.
For MD5, this is a no-op. It is not currently possible to configure accepted
signature algorithms, MD5 wasn't in the hardcoded list, and we already had a
test ensuring we enforced our preferences correctly. MD5 also wasn't in the
default list of hashes our keys could sign and no one overrides it with a
different hash.
For SHA-224, this is not quite a no-op. The hardcoded accepted signature
algorithms list included SHA-224, so this will break servers relying on that.
However, Chrome's metrics have zero data points of servers picking SHA-224 and
no other major browser includes it. Thus that should be safe.
SHA-224 was also in the default list of hashes we are willing to sign. For
client certificates, Chromium's abstractions already did not allow signing
SHA-224, so this is a no-op there. For servers, this will break any clients
which only accept SHA-224. But no major browsers do this and I am not aware of
any client implementation which does such ridiculous thing.
(SHA-1's still in there. Getting rid of that one is going to take more effort.)
Change-Id: I6a765fdeea9e19348e409d58a0eac770b318e599
Reviewed-on: https://boringssl-review.googlesource.com/7020
Reviewed-by: Adam Langley <agl@google.com>
For TLS, this machinery only exists to swallow no_certificate alerts
which only get sent in an SSL 3.0 codepath anyway. It's much less a
no-op for SSL 3.0 which, strictly speaking, has only a subset of TLS's
alerts.
This gets messy around version negotiation because of the complex
relationship between enc_method, have_version, and version which all get
set at different times. Given that SSL 3.0 is nearly dead and all these
alerts are fatal to the connection anyway, this doesn't seem worth
carrying around. (It doesn't work very well anyway. An SSLv3-only server
may still send a record_overflow alert before version negotiation.)
This removes the last place enc_method is accessed prior to version
negotiation.
Change-Id: I79a704259fca69e4df76bd5a6846c9373f46f5a9
Reviewed-on: https://boringssl-review.googlesource.com/6843
Reviewed-by: Adam Langley <alangley@gmail.com>
We haven't had problems with this, but make sure it stays that way.
Bogus signature algorithms are already covered.
Change-Id: I085350d89d79741dba3f30fc7c9f92de16bf242a
Reviewed-on: https://boringssl-review.googlesource.com/6910
Reviewed-by: David Benjamin <davidben@google.com>
This is a minor regression from
https://boringssl-review.googlesource.com/5235.
If the client, for whatever reason, had an ID-based session but also
supports tickets, it will send non-empty ID + empty ticket extension.
If the ticket extension is non-empty, then the ID is not an ID but a
dummy signaling value, so 5235 avoided looking it up. But if it is
present and empty, the ID is still an ID and should be looked up.
This shouldn't have any practical consequences, except if a server
switched from not supporting tickets and then started supporting it,
while keeping the session cache fixed.
Add a test for this case, and tighten up existing ID vs ticket tests so
they fail if we resume with the wrong type.
Change-Id: Id4d08cd809af00af30a2b67fe3a971078e404c75
Reviewed-on: https://boringssl-review.googlesource.com/6554
Reviewed-by: Adam Langley <alangley@gmail.com>
We don't actually have an API to let you know if the value is legal to
interpret as a curve ID. (This was kind of a poor API. Oh well.) Also add tests
for key_exchange_info. I've intentionally left server-side plain RSA missing
for now because the SSL_PRIVATE_KEY_METHOD abstraction only gives you bytes and
it's probably better to tweak this API instead.
(key_exchange_info also wasn't populated on the server, though due to a
rebasing error, that fix ended up in the parent CL. Oh well.)
Change-Id: I74a322c8ad03f25b02059da7568c9e1a78419069
Reviewed-on: https://boringssl-review.googlesource.com/6783
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
This injects an interface to abstract between elliptic.Curve and a
byte-oriented curve25519. The C implementation will follow a similar
strategy.
Note that this slightly tweaks the order of operations. The client sees
the server public key before sending its own. To keep the abstraction
simple, ecdhCurve expects to generate a keypair before consuming the
peer's public key. Instead, the client handshake stashes the serialized
peer public value and defers parsing it until it comes time to send
ClientKeyExchange. (This is analogous to what it was doing before where
it stashed the parsed peer public value instead.)
BUG=571231
Change-Id: I771bb9aee0dd6903d395c84ec4f2dd7b3e366c75
Reviewed-on: https://boringssl-review.googlesource.com/6777
Reviewed-by: Adam Langley <agl@google.com>
Hopefully this can be replaced with a standard library version later.
BUG=571231
Change-Id: I61ae1d9d057c6d9e1b92128042109758beccc7ff
Reviewed-on: https://boringssl-review.googlesource.com/6776
Reviewed-by: Adam Langley <agl@google.com>
We don't live in a workspace, but relative import paths exist, so we
don't have to modify the modules we bundle to avoid naming collisions.
Change-Id: Ie7c70dbc4bb0485421814d40b6a6bd5f140e1d29
Reviewed-on: https://boringssl-review.googlesource.com/6781
Reviewed-by: Adam Langley <agl@google.com>
It already wasn't in the default list and no one enables it. Remove it
altogether. (It's also gone from the current TLS 1.3 draft.)
Change-Id: I143d07d390d186252204df6bdb8ffd22649f80e3
Reviewed-on: https://boringssl-review.googlesource.com/6775
Reviewed-by: Adam Langley <agl@google.com>
Apple these days ships lldb without gdb. Teach runner how to launch it
too.
Change-Id: I25f845f84f1c87872a9e3bc4b7fe3e7344e8c1f7
Reviewed-on: https://boringssl-review.googlesource.com/6769
Reviewed-by: Adam Langley <agl@google.com>
Only ECDHE-based ciphers are implemented. To ease the transition, the
pre-standard cipher shares a name with the standard one. The cipher rule parser
is hacked up to match the name to both ciphers. From the perspective of the
cipher suite configuration language, there is only one cipher.
This does mean it is impossible to disable the old variant without a code
change, but this situation will be very short-lived, so this is fine.
Also take this opportunity to make the CK and TXT names align with convention.
Change-Id: Ie819819c55bce8ff58e533f1dbc8bef5af955c21
Reviewed-on: https://boringssl-review.googlesource.com/6686
Reviewed-by: Adam Langley <agl@google.com>
This will be used to test the C implementation against.
Change-Id: I2d396d27630937ea610144e381518eae76f78dab
Reviewed-on: https://boringssl-review.googlesource.com/6685
Reviewed-by: Adam Langley <agl@google.com>
In preparation for a Go implementation of the new TLS ciphers to test
against, implement the AEAD primitive.
Change-Id: I69b5b51257c3de16bdd36912ed2bc9d91ac853c8
Reviewed-on: https://boringssl-review.googlesource.com/6684
Reviewed-by: Adam Langley <agl@google.com>
In preparation for implementing the RFC 7539 variant to test against.
Change-Id: I0ce5e856906e00925ad1d849017f9e7fda087a8e
Reviewed-on: https://boringssl-review.googlesource.com/6683
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
Sometimes BadRSAClientKeyExchange-1 fails with DATA_TOO_LARGE_FOR_MODULUS if
the corruption brings the ciphertext above the RSA modulus. Ensure this does
not happen.
Change-Id: I0d8ea6887dfcab946fdf5d38f5b196f5a927c4a9
Reviewed-on: https://boringssl-review.googlesource.com/6731
Reviewed-by: Adam Langley <agl@google.com>
Cover not just the wrong version, but also other mistakes.
Change-Id: I46f05a9a37b7e325adc19084d315a415777d3a46
Reviewed-on: https://boringssl-review.googlesource.com/6610
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
