Rather than blindly select SHA-1 if we can't find a matching one, act as
if the peer advertised rsa_pkcs1_sha1 and ecdsa_sha1. This means that we
will fail the handshake if no common algorithm may be found.
This is done in preparation for removing the SHA-1 default in TLS 1.3.
Change-Id: I3584947909d3d6988b940f9404044cace265b20d
Reviewed-on: https://boringssl-review.googlesource.com/8695
Reviewed-by: David Benjamin <davidben@google.com>
Instead, in SSL_set_private_key_digest_prefs, convert the NID list to a
sigalgs list. We'll need to add a new API later when custom key callers
are ready to start advertising RSA-PSS.
This removes all callers of tls12_get_hash except inside the signing and
verifying functions.
Change-Id: Ie534f3b736c6ac6ebeb0d7770d489f72e3321865
Reviewed-on: https://boringssl-review.googlesource.com/8693
Reviewed-by: David Benjamin <davidben@google.com>
This replaces the old key_exchange_info APIs and does not require the
caller be aware of the mess around SSL_SESSION management. They
currently have the same bugs around renegotiation as before, but later
work to fix up SSL_SESSION tracking will fix their internals.
For consistency with the existing functions, I've kept the public API at
'curve' rather than 'group' for now. I think it's probably better to
have only one name with a single explanation in the section header
rather than half and half. (I also wouldn't be surprised if the IETF
ends up renaming 'group' again to 'key exchange' at some point. We'll
see what happens.)
Change-Id: I8e90a503bc4045d12f30835c86de64ef9f2d07c8
Reviewed-on: https://boringssl-review.googlesource.com/8565
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's SSL_OP_NO_* flags allow discontinuous version ranges. This is a
nuisance for two reasons. First it makes it unnecessarily difficult to answer
"are any versions below TLS 1.3 enabled?". Second the protocol does not allow
discontinuous version ranges on the client anyway. OpenSSL instead picks the
first continous range of enabled versions on the client, but not the server.
This is bizarrely inconsistent. It also doesn't quite do this as the
ClientHello sending logic does this, but not the ServerHello processing logic.
So we actually break some invariants slightly. The logic is also cumbersome in
DTLS which kindly inverts the comparison logic.
First, switch min_version/max_version's storage to normalized versions. Next
replace all the ad-hoc version-related functions with a single
ssl_get_version_range function. Client and server now consistently pick a
contiguous range of versions. Note this is a slight behavior change for
servers. Version-range-sensitive logic is rewritten to use this new function.
BUG=66
Change-Id: Iad0d64f2b7a917603fc7da54c9fc6656c5fbdb24
Reviewed-on: https://boringssl-review.googlesource.com/8513
Reviewed-by: David Benjamin <davidben@google.com>
The signing logic itself still depends on pre-hashed messages and will be fixed
in later commits.
Change-Id: I901b0d99917c311653d44efa34a044bbb9f11e57
Reviewed-on: https://boringssl-review.googlesource.com/8545
Reviewed-by: David Benjamin <davidben@google.com>
As part of the SignatureAlgorithm change in the TLS 1.3 specification,
the existing signature/hash combinations are replaced with a combined
signature algorithm identifier. This change maintains the existing APIs
while fixing the internal representations. The signing code currently
still treats the SignatureAlgorithm as a decomposed value, which will be
fixed as part of a separate CL.
Change-Id: I0cd1660d74ad9bcf55ce5da4449bf2922660be36
Reviewed-on: https://boringssl-review.googlesource.com/8480
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The 'elliptic_curves' extension is being renamed to 'supported_groups'
in the TLS 1.3 draft, and most of the curve-specific methods are
generalized to groups/group IDs.
Change-Id: Icd1a1cf7365c8a4a64ae601993dc4273802610fb
Reviewed-on: https://boringssl-review.googlesource.com/7955
Reviewed-by: David Benjamin <davidben@google.com>
Although the server_name extension was intended to be extensible to new name
types, OpenSSL 1.0.x had a bug which meant different name types will cause an
error. Further, RFC 4366 originally defined syntax inextensibly. RFC 6066
corrected this mistake, but adding new name types is no longer feasible.
Act as if the extensibility does not exist to simplify parsing. This also
aligns with OpenSSL 1.1.x's behavior. See upstream's
062178678f5374b09f00d70796f6e692e8775aca and
https://www.ietf.org/mail-archive/web/tls/current/msg19425.html
Change-Id: I5af26516e8f777ddc1dab5581ff552daf2ea59b5
Reviewed-on: https://boringssl-review.googlesource.com/7294
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
We reordered extensions some time ago to ensure a non-empty extension was last,
but the comment was since lost (or I forgot to put one in in the first place).
Add one now so we don't regress.
Change-Id: I2f6e2c3777912eb2c522a54bbbee579ee37ee58a
Reviewed-on: https://boringssl-review.googlesource.com/7570
Reviewed-by: David Benjamin <davidben@google.com>
Most code already dereferences it directly.
Change-Id: I227fa91ecbf25a19077f7cfba21b0abd2bc2bd1d
Reviewed-on: https://boringssl-review.googlesource.com/7422
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
EC point format negotiation is dead and gone.
Change-Id: If13ed7c5f31b64df2bbe90c018b2683b6371a980
Reviewed-on: https://boringssl-review.googlesource.com/7293
Reviewed-by: Adam Langley <agl@google.com>
C has implicit conversion of |void *| to other pointer types so these
casts are unnecessary. Clean them up to make the code easier to read
and to make it easier to find dangerous casts.
Change-Id: I26988a672e8ed4d69c75cfbb284413999b475464
Reviewed-on: https://boringssl-review.googlesource.com/7102
Reviewed-by: David Benjamin <davidben@google.com>
Take the mappings for MD5 and SHA-224 values out of the code altogether. This
aligns with the current TLS 1.3 draft.
For MD5, this is a no-op. It is not currently possible to configure accepted
signature algorithms, MD5 wasn't in the hardcoded list, and we already had a
test ensuring we enforced our preferences correctly. MD5 also wasn't in the
default list of hashes our keys could sign and no one overrides it with a
different hash.
For SHA-224, this is not quite a no-op. The hardcoded accepted signature
algorithms list included SHA-224, so this will break servers relying on that.
However, Chrome's metrics have zero data points of servers picking SHA-224 and
no other major browser includes it. Thus that should be safe.
SHA-224 was also in the default list of hashes we are willing to sign. For
client certificates, Chromium's abstractions already did not allow signing
SHA-224, so this is a no-op there. For servers, this will break any clients
which only accept SHA-224. But no major browsers do this and I am not aware of
any client implementation which does such ridiculous thing.
(SHA-1's still in there. Getting rid of that one is going to take more effort.)
Change-Id: I6a765fdeea9e19348e409d58a0eac770b318e599
Reviewed-on: https://boringssl-review.googlesource.com/7020
Reviewed-by: Adam Langley <agl@google.com>
This removes the various non-PRF checks from SSL3_ENC_METHOD so that can
have a clearer purpose. It also makes TLS 1.0 through 1.2's
SSL3_ENC_METHOD tables identical and gives us an assert to ensure
nothing accesses the version bits before version negotiation.
Accordingly, ssl_needs_record_splitting was reordered slightly so we
don't rely on enc_method being initialized to TLS 1.2
pre-version-negotiation.
This leaves alert_value as the only part of SSL3_ENC_METHOD which may be
accessed before version negotiation.
Change-Id: If9e299e2ef5511b5fa442b2af654eed054c3e675
Reviewed-on: https://boringssl-review.googlesource.com/6842
Reviewed-by: Adam Langley <alangley@gmail.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
I got that from the TLS 1.3 draft, but it's kind of silly-looking. X25519
already refers to a Diffie-Hellman primitive.
Also hopefully the WG will split NamedGroups and SignatureAlgorithms per the
recent proposal, so it won't be needed anyway. (Most chatter is about what
hashes should be allowed with what NIST curves, so it seems like people like
the split itself? We'll see.)
Change-Id: I7bb713190001199a3ebd30b67df2c00d29132431
Reviewed-on: https://boringssl-review.googlesource.com/6912
Reviewed-by: Adam Langley <agl@google.com>
The various SSL3_ENC_METHODs ought to be defined in the same file their
functions are defined in, so they can be static.
Change-Id: I34a1d3437e8e61d4d50f2be70312e4630ea89c19
Reviewed-on: https://boringssl-review.googlesource.com/6840
Reviewed-by: Adam Langley <alangley@gmail.com>
There's not much point in putting those in the interface as the
final_finished_mac implementation is itself different between SSL 3.0
and TLS.
Change-Id: I76528a88d255c451ae008f1a34e51c3cb57d3073
Reviewed-on: https://boringssl-review.googlesource.com/6838
Reviewed-by: Adam Langley <alangley@gmail.com>
As things stand now, they don't actually do anything.
Change-Id: I9f8b4cbf38a0dffabfc5265805c52bb8d7a8fb0d
Reviewed-on: https://boringssl-review.googlesource.com/6837
Reviewed-by: Adam Langley <alangley@gmail.com>
Both are connection state rather than configuration state. Notably this
cuts down more of SSL_clear that can't just use ssl_free + ssl_new.
Change-Id: I3c05b3ae86d4db8bd75f1cd21656f57fc5b55ca9
Reviewed-on: https://boringssl-review.googlesource.com/6835
Reviewed-by: Adam Langley <alangley@gmail.com>
It's the same between TLS and SSL 3.0. There's also no need for the
do_change_cipher_spec wrapper (it no longer needs checks to ensure it
isn't called at a bad place). Finally fold the setup_key_block call into
change_cipher_spec.
Change-Id: I7917f48e1a322f5fbafcf1dfb8ad53f66565c314
Reviewed-on: https://boringssl-review.googlesource.com/6834
Reviewed-by: Adam Langley <alangley@gmail.com>
This is a minor regression from
https://boringssl-review.googlesource.com/5235.
If the client, for whatever reason, had an ID-based session but also
supports tickets, it will send non-empty ID + empty ticket extension.
If the ticket extension is non-empty, then the ID is not an ID but a
dummy signaling value, so 5235 avoided looking it up. But if it is
present and empty, the ID is still an ID and should be looked up.
This shouldn't have any practical consequences, except if a server
switched from not supporting tickets and then started supporting it,
while keeping the session cache fixed.
Add a test for this case, and tighten up existing ID vs ticket tests so
they fail if we resume with the wrong type.
Change-Id: Id4d08cd809af00af30a2b67fe3a971078e404c75
Reviewed-on: https://boringssl-review.googlesource.com/6554
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
It already wasn't in the default list and no one enables it. Remove it
altogether. (It's also gone from the current TLS 1.3 draft.)
Change-Id: I143d07d390d186252204df6bdb8ffd22649f80e3
Reviewed-on: https://boringssl-review.googlesource.com/6775
Reviewed-by: Adam Langley <agl@google.com>
In doing so, make the asynchronous portion look more like
ssl3_send_server_key_exchange. This is a considerably simpler structure,
so the save/resume doesn't need any state.
Mostly this means writing out the signature algorithm can now go through
CBB rather than a uint8_t* without bounds check.
Change-Id: If99fcffd0d41a84514c3d23034062c582f1bccb2
Reviewed-on: https://boringssl-review.googlesource.com/6771
Reviewed-by: Adam Langley <agl@google.com>
Rather than the length of the top-level CBB, which is kind of odd when ASN.1
length prefixes are not yet determined, return the number of bytes written to
the CBB so far. This can be computed without increasing the size of CBB at all.
Have offset and pending_*.
This means functions which take in a CBB as argument will not be sensitive to
whether the CBB is a top-level or child CBB. The extensions logic had to be
careful to only ever compare differences of lengths, which was awkward.
The reversal will also allow for the following pattern in the future, once
CBB_add_space is split into, say, CBB_reserve and CBB_did_write and we add a
CBB_data:
uint8_t *signature;
size_t signature_len = 0;
if (!CBB_add_asn1(out, &cert, CBB_ASN1_SEQUENCE) ||
/* Emit the TBSCertificate. */
!CBB_add_asn1(&cert, &tbs_cert, CBS_ASN1_SEQUENCE) ||
!CBB_add_tbs_cert_stuff(&tbs_cert, stuff) ||
!CBB_flush(&cert) ||
/* Feed it into md_ctx. */
!EVP_DigestSignInit(&md_ctx, NULL, EVP_sha256(), NULL, pkey) ||
!EVP_DigestSignUpdate(&md_ctx, CBB_data(&cert), CBB_len(&cert)) ||
/* Emit the signature algorithm. */
!CBB_add_asn1(&cert, &sig_alg, CBS_ASN1_SEQUENCE) ||
!CBB_add_sigalg_stuff(&sig_alg, other_stuff) ||
/* Emit the signature. */
!EVP_DigestSignFinal(&md_ctx, NULL, &signature_len) ||
!CBB_reserve(&cert, &signature, signature_len) ||
!EVP_DigestSignFinal(&md_ctx, signature, &signature_len) ||
!CBB_did_write(&cert, signature_len)) {
goto err;
}
(Were TBSCertificate not the first field, we'd still have to sample
CBB_len(&cert), but at least that's reasonable straight-forward. The
alternative would be if CBB_data and CBB_len somehow worked on
recently-invalidated CBBs, but that would go wrong once the invalidated CBB's
parent flushed and possibly shifts everything.)
And similar for signing ServerKeyExchange.
Change-Id: I7761e492ae472d7632875b5666b6088970261b14
Reviewed-on: https://boringssl-review.googlesource.com/6681
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
RFC 5746 forbids a server from downgrading or upgrading
renegotiation_info support. Even with SSL_OP_LEGACY_SERVER_CONNECT set
(the default), we can still enforce a few things.
I do not believe this has practical consequences. The attack variant
where the server half is prefixed does not involve a renegotiation on
the client. The converse where the client sees the renegotiation and
prefix does, but we only support renego for the mid-stream HTTP/1.1
client auth hack, which doesn't do this. (And with triple-handshake,
HTTPS clients should be requiring the certificate be unchanged across
renego which makes this moot.)
Ultimately, an application which makes the mistake of using
renegotiation needs to be aware of what exactly that means and how to
handle connection state changing mid-stream. We make renego opt-in now,
so this is a tenable requirement.
(Also the legacy -> secure direction would have been caught by the
server anyway since we send a non-empty RI extension.)
Change-Id: I915965c342f8a9cf3a4b6b32f0a87a00c3df3559
Reviewed-on: https://boringssl-review.googlesource.com/6559
Reviewed-by: Adam Langley <agl@google.com>
Right now your options are:
- Bounce on a reference and deal with cleanup needlessly.
- Manually check the type tag and peek into the union.
We probably have no hope of opaquifying this struct, but for new code, let's
recommend using this function rather than the more error-prone thing.
Change-Id: I9b39ff95fe4264a3f7d1e0d2894db337aa968f6c
Reviewed-on: https://boringssl-review.googlesource.com/6551
Reviewed-by: Adam Langley <agl@google.com>
The current check has two problems:
- It only runs on the server, where there isn't a curve list at all. This was a
mistake in https://boringssl-review.googlesource.com/1843 which flipped it
from client-only to server-only.
- It only runs in TLS 1.2, so one could bypass it by just negotiating TLS 1.1.
Upstream added it as part of their Suite B mode, which requires 1.2.
Move it elsewhere. Though we do not check the entire chain, leaving that to the
certificate verifier, signatures made by the leaf certificate are made by the
SSL/TLS stack, so it's reasonable to check the curve as part of checking
suitability of a leaf.
Change-Id: I7c12f2a32ba946a20e9ba6c70eff23bebcb60bb2
Reviewed-on: https://boringssl-review.googlesource.com/6414
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
This is completely a no-op as currently tls12_get_psigalgs always returns a
hardcoded list which always includes SHA-1. But if this were to be made
configurable in the future, we should reject SHA-1 when configured to do so.
Change-Id: I7ab188eeff850d1e5f70b9522304812bab2d941a
Reviewed-on: https://boringssl-review.googlesource.com/6411
Reviewed-by: Adam Langley <agl@google.com>
Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
Right whether NPN is advertised can only be configured globally on the SSL_CTX.
Rather than adding two pointers to each SSL*, add an options bit to disable it
so we may plumb in a field trial to disable NPN.
Chromium wants to be able to route a bit in to disable NPN, but it uses SSL_CTX
incorrectly and has a global one, so it can't disconnect the callback. (That
really needs to get fixed. Although it's not clear this necessarily wants to be
lifted up to SSL_CTX as far as Chromium's SSLClientSocket is concerned since
NPN doesn't interact with the session cache.)
BUG=526713
Change-Id: I49c86828b963eb341c6ea6a442557b7dfa190ed3
Reviewed-on: https://boringssl-review.googlesource.com/6351
Reviewed-by: Adam Langley <alangley@gmail.com>
Also added a SSL_CTX_set_select_certificate_cb setter for
select_certificate_cb so code needn't access SSL_CTX directly. Plus it
serves as a convenient anchor for the documentation.
Change-Id: I23755b910e1d77d4bea7bb9103961181dd3c5efe
Reviewed-on: https://boringssl-review.googlesource.com/6291
Reviewed-by: Adam Langley <alangley@gmail.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL 3.0 used to have a nice and simple rule around extensions. They don't
exist. And then RFC 5746 came along and made this all extremely confusing.
In an SSL 3.0 server, rather than blocking ServerHello extension
emission when renegotiation_info is missing, ignore all ClientHello
extensions but renegotiation_info. This avoids a mismatch between local
state and the extensions with emit.
Notably if, for some reason, a ClientHello includes the session_ticket
extension, does NOT include renegotiation_info or the SCSV, and yet the
client or server are decrepit enough to negotiate SSL 3.0, the
connection will fail due to unexpected NewSessionTicket message.
See https://crbug.com/425979#c9 for a discussion of something similar
that came up in diagnosing https://poodle.io/'s buggy POODLE check.
This is analogous to upstream's
5a3d8eebb7667b32af0ccc3f12f314df6809d32d.
(Not supporting renego as a server in any form anyway, we may as well
completely ignore extensions, but then our extensions callbacks can't
assume the parse hooks are always called. This way the various NULL
handlers still function.)
Change-Id: Ie689a0e9ffb0369ef7a20ab4231005e87f32d5f8
Reviewed-on: https://boringssl-review.googlesource.com/6180
Reviewed-by: Adam Langley <agl@google.com>
The Android system BoringSSL has a couple of changes:
∙ ChaCha20-Poly1305 is disabled because it's not an offical
cipher suite.
∙ P-521 is offered in the ClientHello.
These changes were carried in the Android BoringSSL repo directly. This
change upstreams them when BORINGSSL_ANDROID_SYSTEM is defined.
Change-Id: If3e787c6694655b56e7701118aca661e97a5f26c
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
SCT and OCSP are part of the session data and as such shouldn't be sent
again to the client when resuming.
Change-Id: Iaee3a3c4c167ea34b91504929e38aadee37da572
Reviewed-on: https://boringssl-review.googlesource.com/5900
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
