With this, in 0.02% of 1024-bit primes (which is what's used with an RSA
2048 generation), we'll leak that we struggled to generate values less
than the prime. I.e. that there's a greater likelihood of zero bits
after the leading 1 bit in the prime.
But this recovers all the speed loss from making key generation
constant-time, and then some.
Did 273 RSA 2048 key-gen operations in 30023223us (9.1 ops/sec)
min: 23867us, median: 93688us, max: 421466us
Did 66 RSA 3072 key-gen operations in 30041763us (2.2 ops/sec)
min: 117044us, median: 402095us, max: 1096538us
Did 31 RSA 4096 key-gen operations in 31673405us (1.0 ops/sec)
min: 245109us, median: 769480us, max: 2659386us
Change-Id: Id82dedde35f5fbb36b278189c0685a13c7824590
Reviewed-on: https://boringssl-review.googlesource.com/26924
Reviewed-by: Adam Langley <alangley@gmail.com>
Windows CryptoAPI and Go bound public exponents at 2^32-1, so don't
generate keys which would violate that.
https://github.com/golang/go/issues/3161https://msdn.microsoft.com/en-us/library/aa387685(VS.85).aspx
BoringSSL itself also enforces a 33-bit limit.
I don't currently have plans to take much advantage of it, but the
modular inverse step and one of the GCDs in RSA key generation are
helped by small public exponents[0]. In case someone feels inspired
later, get this limit enforced now. Use 32-bits as that's a more
convenient limit, and there's no requirement to produce e=2^32+1 keys.
(Is there still a requirement to accept them?)
[0] This isn't too bad, but it's only worth it if it produces simpler or
smaller code. RSA keygen is not performance-critical.
1. Make bn_mod_u16_consttime work for uint32_t. It only barely doesn't
work. Maybe only accept 3 and 65537 and pre-compute, maybe call into
bn_div_rem_words and friends, maybe just tighten the bound a hair
longer.
2. Implement bn_div_u32_consttime by incorporating 32-bit chunks much
like bn_mod_u32_consttime.
3. Perform one normal Euclidean algorithm iteration rather than using the
binary version. u, v, B, and D are now single words, while A and C
are full-width.
4. Continue with binary Euclidean algorithm (u and v are still secret),
taking advantage of most values being small.
Update-Note: RSA_generate_key_ex will no longer generate keys with
public exponents larger than 2^32-1. Everyone uses 65537, save some
folks who use 3, so this shouldn't matter.
Change-Id: I0d28a29a30d9ff73bff282e34dd98e2b64c35c79
Reviewed-on: https://boringssl-review.googlesource.com/26365
Reviewed-by: Adam Langley <alangley@gmail.com>
We don't check it is fully reduced because different implementations use
Carmichael vs Euler totients, but if d exceeds n, something is wrong.
Note the fixed-width BIGNUM changes already fail operations with
oversized d.
Update-Note: Some blatantly invalid RSA private keys will be rejected at
RSA_check_key time. Note that most of those keys already are not
usable with BoringSSL anyway. This CL moves the failure from
sign/decrypt to RSA_check_key.
Change-Id: I468dbba74a148aa58c5994cc27f549e7ae1486a2
Reviewed-on: https://boringssl-review.googlesource.com/26374
Reviewed-by: Adam Langley <alangley@gmail.com>
Rather than recompute values the same as in key generation, where
possible, we check differently. In particular, most RSA values are
modular inverses of some value. Check each of them by multiplying and
using our naive constant-time division function.
Median of 29 RSA keygens: 0m0.218s -> 0m0.205s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: Iaca19f12c045457013def844a17bf502ed09136e
Reviewed-on: https://boringssl-review.googlesource.com/26373
Reviewed-by: Adam Langley <alangley@gmail.com>
This leaves RSA_check_key, which will be fixed in subsequent commits.
Median of 29 RSA keygens: 0m0.220s -> 0m0.209s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I325f23fcc59302e68570908e5427b65471b799f6
Reviewed-on: https://boringssl-review.googlesource.com/26371
Reviewed-by: Adam Langley <alangley@gmail.com>
This uses the full binary GCD algorithm, where all four of A, B, C, and
D must be retained. (BN_mod_inverse_odd implements the odd number
version which only needs A and C.) It is patterned after the version
in the Handbook of Applied Cryptography, but tweaked so the coefficients
are non-negative and bounded.
Median of 29 RSA keygens: 0m0.225s -> 0m0.220s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I6dc13524ea7c8ac1072592857880ddf141d87526
Reviewed-on: https://boringssl-review.googlesource.com/26370
Reviewed-by: Adam Langley <alangley@gmail.com>
RSA key generation requires computing a GCD (p-1 and q-1 are relatively
prime with e) and an LCM (the Carmichael totient). I haven't made BN_gcd
itself constant-time here to save having to implement
bn_lshift_secret_shift, since the two necessary operations can be served
by bn_rshift_secret_shift, already added for Rabin-Miller. However, the
guts of BN_gcd are replaced. Otherwise, the new functions are only
connected to tests for now, they'll be used in subsequent CLs.
To support LCM, there is also now a constant-time division function.
This does not replace BN_div because bn_div_consttime is some 40x slower
than BN_div. That penalty is fine for RSA keygen because that operation
is not bottlenecked on division, so we prefer simplicity over
performance.
Median of 29 RSA keygens: 0m0.212s -> 0m0.225s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: Idbfbfa6e7f5a3b8782ce227fa130417b3702cf97
Reviewed-on: https://boringssl-review.googlesource.com/26369
Reviewed-by: Adam Langley <alangley@gmail.com>
Expose the constant-time abs_sub functions from the fixed Karatsuba code
in BIGNUM form for RSA to call into. RSA key generation involves
checking if |p - q| is above some lower bound.
BN_sub internally branches on which of p or q is bigger. For any given
iteration, this is not secret---one of p or q is necessarily the larger,
and whether we happened to pick the larger or smaller first is
irrelevant. Accordingly, there is no need to perform the p/q swap at the
end in constant-time.
However, this stage of the algorithm picks p first, sticks with it, and
then computes |p - q| for various q candidates. The distribution of
comparisons leaks information about p. The leak is unlikely to be
problematic, but plug it anyway.
Median of 29 RSA keygens: 0m0.210s -> 0m0.212s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I024b4e51b364f5ca2bcb419a0393e7be13249aec
Reviewed-on: https://boringssl-review.googlesource.com/26368
Reviewed-by: Adam Langley <alangley@gmail.com>
It costs us a malloc, but it's one less function to test and implement
in constant time, now that BN_cmp and BIGNUM are okay.
Median of 29 RSA keygens: 0m0.207s -> 0m0.210s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: Ic56f92f0dcf04da1f542290a7e8cdab8036699ed
Reviewed-on: https://boringssl-review.googlesource.com/26367
Reviewed-by: Adam Langley <alangley@gmail.com>
RSA key generation currently does the GCD check before the primality
test, in hopes of discarding things invalid by other means before
running the expensive primality check.
However, GCD is about to get a bit more expensive to clear the timing
leak, and the trial division part of primality testing is quite fast.
Thus, split that portion out via a new bn_is_obviously_composite and
call it before GCD.
Median of 29 RSA keygens: 0m0.252s -> 0m0.207s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I3999771fb73cca16797cab9332d14c4ebeb02046
Reviewed-on: https://boringssl-review.googlesource.com/26366
Reviewed-by: Adam Langley <alangley@gmail.com>
This reverts commit 21ef155063. Doesn't
look like I succeeded in uploading that. Will sort that out later.
Change-Id: Ic5395abe46b2b99aaffd254afcd97157518c8ba8
Reviewed-on: https://boringssl-review.googlesource.com/26886
Reviewed-by: David Benjamin <davidben@google.com>
This change follows up from e759a9cd with more extensive changes and
tests:
If a name checking function (like |X509_VERIFY_PARAM_set1_host|) fails,
it now poisons the |X509_VERIFY_PARAM| so that all verifications will
fail. This is because we have observed that some callers are not
checking the return value of these functions.
Using a length of zero for a hostname to mean |strlen| is now an error.
It also an error for email addresses and IP addresses now, and doesn't
end up trying to call |strlen| on a (binary) IP address.
Setting an email address with embedded NULs now fails. So does trying to
configure an empty hostname or email with (NULL, 0).
|X509_check_*| functions in BoringSSL don't accept zero lengths (unlike
OpenSSL). It's now tested that such calls always fail.
Change-Id: I4484176f2aae74e502a09081c7e912c85e8d090b
Update-Note: several behaviour changes. See change description.
Reviewed-on: https://boringssl-review.googlesource.com/26764
Reviewed-by: David Benjamin <davidben@google.com>
I'm not sure why I separated "fixed" and "quick_ctx" names. That's
annoying and doesn't generalize well to, say, adding a bn_div_consttime
function for RSA keygen.
Change-Id: I751d52b30e079de2f0d37a952de380fbf2c1e6b7
Reviewed-on: https://boringssl-review.googlesource.com/26364
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Rabin-Miller requires selecting a random number from 2 to |w|-1.
This is done by picking an N-bit number and discarding out-of-range
values. This leaks information about |w|, so apply blinding. Rather than
discard bad values, adjust them to be in range.
Though not uniformly selected, these adjusted values
are still usable as Rabin-Miller checks.
Rabin-Miller is already probabilistic, so we could reach the desired
confidence levels by just suitably increasing the iteration count.
However, to align with FIPS 186-4, we use a more pessimal analysis: we
do not count the non-uniform values towards the iteration count. As a
result, this function is more complex and has more timing risk than
necessary.
We count both total iterations and uniform ones and iterate until we've
reached at least |BN_PRIME_CHECKS_BLINDED| and |iterations|,
respectively. If the latter is large enough, it will be the limiting
factor with high probability and we won't leak information.
Note this blinding does not impact most calls when picking primes
because composites are rejected early. Only the two secret primes see
extra work. So while this does make the BNTest.PrimeChecking test take
about 2x longer to run on debug mode, RSA key generation time is fine.
Another, perhaps simpler, option here would have to run
bn_rand_range_words to the full 100 count, select an arbitrary
successful try, and declare failure of the entire keygen process (as we
do already) if all tries failed. I went with the option in this CL
because I happened to come up with it first, and because the failure
probability decreases much faster. Additionally, the option in this CL
does not affect composite numbers, while the alternate would. This gives
a smaller multiplier on our entropy draw. We also continue to use the
"wasted" work for stronger assurance on primality. FIPS' numbers are
remarkably low, considering the increase has negligible cost.
Thanks to Nathan Benjamin for helping me explore the failure rate as the
target count and blinding count change.
Now we're down to the rest of RSA keygen, which will require all the
operations we've traditionally just avoided in constant-time code!
Median of 29 RSA keygens: 0m0.169s -> 0m0.298s
(Accuracy beyond 0.1s is questionable. The runs at subsequent test- and
rename-only CLs were 0m0.217s, 0m0.245s, 0m0.244s, 0m0.247s.)
Bug: 238
Change-Id: Id6406c3020f2585b86946eb17df64ac42f30ebab
Reviewed-on: https://boringssl-review.googlesource.com/25890
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(This is actually slightly silly as |a|'s probability distribution falls
off exponentially, but it's easy enough to do right.)
Instead, we run the loop to the end. This is still performant because we
can, as before, return early on composite numbers. Only two calls
actually run to the end. Moreover, running to the end has comparable
cost to BN_mod_exp_mont_consttime.
Median time goes from 0.140s to 0.231s. That cost some, but we're still
faster than the original implementation.
We're down to one more leak, which is that the BN_rand_range_ex call
does not hide |w1|. That one may only be solved probabilistically...
Median of 29 RSA keygens: 0m0.123s -> 0m0.145s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I4847cb0053118c572d2dd5f855388b5199fa6ce2
Reviewed-on: https://boringssl-review.googlesource.com/25888
Reviewed-by: Adam Langley <agl@google.com>
Compilers use a variant of Barrett reduction to divide by constants,
which conveniently also avoids problematic operations on the secret
numerator. Implement the variant as described here:
http://ridiculousfish.com/blog/posts/labor-of-division-episode-i.html
Repurpose this to implement a constant-time BN_mod_word replacement.
It's even much faster! I've gone ahead and replaced the other
BN_mod_word calls on the primes table.
That should give plenty of budget for the other changes. (I am assuming
that a regression is okay, as RSA keygen is not performance-sensitive,
but that I should avoid anything too dramatic.)
Proof of correctness: https://github.com/davidben/fiat-crypto/blob/barrett/src/Arithmetic/BarrettReduction/RidiculousFish.v
Median of 29 RSA keygens: 0m0.621s -> 0m0.123s
(Accuracy beyond 0.1s is questionable, though this particular
improvement is quite solid.)
Bug: 238
Change-Id: I67fa36ffe522365b13feb503c687b20d91e72932
Reviewed-on: https://boringssl-review.googlesource.com/25887
Reviewed-by: Adam Langley <agl@google.com>
The extra details in Enhanced Rabin-Miller are only used in
RSA_check_key_fips, on the public RSA modulus, which the static linker
will drop in most of our consumers anyway. Implement normal Rabin-Miller
for RSA keygen and use Montgomery reduction so it runs in constant-time.
Note that we only need to avoid leaking information about the input if
it's a large prime. If the number ends up composite, or we find it in
our table of small primes, we can return immediately.
The leaks not addressed by this CL are:
- The difficulty of selecting |b| leaks information about |w|.
- The distribution of whether step 4.4 runs leaks information about w.
- We leak |a| (the largest power of two which divides w) everywhere.
- BN_mod_word in the trial division is not constant-time.
These will be resolved in follow-up changes.
Median of 29 RSA keygens: 0m0.521 -> 0m0.621s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I0cf0ff22079732a0a3ababfe352bb4327e95b879
Reviewed-on: https://boringssl-review.googlesource.com/25886
Reviewed-by: Adam Langley <agl@google.com>
Probably worth having actual test vectors for these, rather than
checking our code against itself. Additionally, small negative numbers
have, in the past been valuable test vectors (see long comment in
point_add from OpenSSL's ecp_nistp521.c).
Change-Id: Ia5aa8a80eb5b6d0089c3601c5fec2364e699794d
Reviewed-on: https://boringssl-review.googlesource.com/26848
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
p224_felem_neg does not produce an output within the tight bounds
suitable for p224_felem_contract. This was found by inspection of the
code.
This only affects the final y-coordinate output of arbitrary-point
multiplication, so it is a no-op for ECDH and ECDSA.
Change-Id: I1d929458d1f21d02cd8e745d2f0f7040a6bb0627
Reviewed-on: https://boringssl-review.googlesource.com/26847
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This keeps some scripts happy.
Change-Id: I79be4f3d014b72fbe3f0793759ad2b42329a550c
Reviewed-on: https://boringssl-review.googlesource.com/26824
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This test is written in honor of CVE-2018-0733.
Change-Id: I8a41f917b08496870037f745f19bdcdb65b3d623
Reviewed-on: https://boringssl-review.googlesource.com/26845
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Constructed types with a recursive definition could eventually exceed
the stack given malicious input with excessive recursion. Therefore we
limit the stack depth.
CVE-2018-0739
Credit to OSSFuzz for finding this issue.
(Imported from upstream's 9310d45087ae546e27e61ddf8f6367f29848220d.)
BoringSSL does not contain any such structures, but import this anyway
with a test.
Change-Id: I0e84578ea795134f25dae2ac8b565f3c26ef3204
Reviewed-on: https://boringssl-review.googlesource.com/26844
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Primality testing checks for small words in random places.
Median of 29 RSA keygens: 0m0.811s -> 0m0.521s
(Accuracy beyond 0.1s is questionable, and this "speed up" is certainly
noise.)
Bug: 238
Change-Id: Ie5efab7291302a42ac6e283d25da0c094d8577e7
Reviewed-on: https://boringssl-review.googlesource.com/25885
Reviewed-by: Adam Langley <agl@google.com>
There are a number of random subtractions in RSA key generation. Add a
fixed-width version.
Median of 29 RSA keygens: 0m0.859s -> 0m0.811s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I9fa0771b95a438fd7d2635fd77a332146ccc96d9
Reviewed-on: https://boringssl-review.googlesource.com/25884
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
No semantic change: the table is the same as before, but now with less
magic.
Change-Id: I351c2446e9765f25b7dfb901c9e98f12099a325c
Reviewed-on: https://boringssl-review.googlesource.com/26744
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Rather than writing the answer into the output, it wrote it into some
awkwardly-named temporaries. Thanks to Daniel Hirche for reporting this
issue!
Bug: chromium:825273
Change-Id: I5def4be045cd1925453c9873218e5449bf25e3f5
Reviewed-on: https://boringssl-review.googlesource.com/26785
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Adding preprocessor flags requires a lot of typing in the CMake
command-line (-DCMAKE_C_FLAGS=-DOPENSSL_SMALL
-DCMAKE_CXX_FLAGS=-DOPENSSL_SMALL).
Change-Id: Ieafc4155d656306c1f22746f780faa5c1d3e27be
Reviewed-on: https://boringssl-review.googlesource.com/26784
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BoringSSL does not generally support this quirk but, in this case, we
didn't make it a fatal error and it's instead a silent omission of
hostname checking. This doesn't affect Chrome but, in case something is
using BoringSSL and using this trick, this change makes it safe.
BUG=chromium:824799
Change-Id: If417817b997b9faa9963c09dfc95d06a5d445e0b
Reviewed-on: https://boringssl-review.googlesource.com/26724
Commit-Queue: Adam Langley <alangley@gmail.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
These are composite numbers whose composite witnesses aren't in the
first however many prime numbers, so deterministically checking small
numbers may not work.
We don't check composite witnesses deterministically but these are
probably decent tests. (Not sure how else to find composites with
scarce witnesses, but these seemed decent candidates.)
Change-Id: I23dcb7ba603a64c1f7d1e9a16942e7c29c76da51
Reviewed-on: https://boringssl-review.googlesource.com/26645
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ia4fdd1eb848abacf43e18f6741ffa4ff79e40fd8
Reviewed-on: https://boringssl-review.googlesource.com/26664
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Folks should use curve25519 or P-256 if in doubt.
Change-Id: Ie35381ef739744788a80345286f7b21e2bb67c88
Reviewed-on: https://boringssl-review.googlesource.com/26646
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
These were randomly generated.
Change-Id: I532afdaf469e6c80e518dae3a75547ff7cb0948f
Reviewed-on: https://boringssl-review.googlesource.com/26065
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
NSS only enables compatibility mode on the server if the client
requested it by way of the session ID. This is slightly off as a client
has no way not to request it when offering a TLS 1.2 session, but it is
in the spec.
So our tests are usable for other stacks, send a fake session ID in the
runner by default. The existing EmptySessionID-TLS13* test asserts that
BoringSSL behaves as we expect it to on empty session IDs too. The
intent is that NSS will disable that test but can otherwise leave the
rest enabled.
Change-Id: I370bf90aba1805c2f6970ceee0d29ecf199f437d
Reviewed-on: https://boringssl-review.googlesource.com/26504
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
On the other hand, the type-specific
|CBS_get_optional_asn1_octet_string| must have a valid pointer and we
should check this in the “present” case or there could be a lucking
crash in some user waiting for an expected value to be missing.
Change-Id: Ida40e069ac7f0e50967e3f6c6b3fc01e49bd8894
Reviewed-on: https://boringssl-review.googlesource.com/26564
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It has now been folded into ServerHello. Additionally, TLS 1.2 and TLS
1.3 ServerHellos are now more uniform, so we can avoid the extra
ServerHello parser.
Change-Id: I46641128c3f65fe37e7effca5bef4a76bf3ba84c
Reviewed-on: https://boringssl-review.googlesource.com/26524
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
This clearly was supposed to be a return 1. See
https://github.com/openssl/openssl/issues/5537 for details.
(Additionally, now that our BIGNUMs may be non-minimal, this function
violates the rule that BIGNUM functions should not depend on widths. We
should use w >= bn_minimal_width(a) to retain the original behavior. But
the original behavior is nuts, so let's just fix it.)
Update-Note: BN_mask_bits no longer reports failure in some cases. These
cases were platform-dependent and not useful, and code search confirms
nothing was relying on it.
Change-Id: I31b1c2de6c5de9432c17ec3c714a5626594ee03c
Reviewed-on: https://boringssl-review.googlesource.com/26464
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
