These are the remaining untested cipher suites. Rather than add support in
runner.go, just remove them altogether. Grepping for this is a little tricky,
but nothing enables aNULL (all occurrences disable it), and all occurrences of
["ALL:] seem to be either unused or explicitly disable anonymous ciphers.
Change-Id: I4fd4b8dc6a273d6c04a26e93839641ddf738343f
Reviewed-on: https://boringssl-review.googlesource.com/4258
Reviewed-by: Adam Langley <agl@google.com>
Now that ERR is using thread-local storage, there's very little that the
THREADID code is doing and it can be turned into stub functions.
Change-Id: I668613fec39b26c894d029b10a8173c3055f6019
Since ERR will soon have thread-local storage, we don't need to worry
about high-performance implementations and thus don't need to be able to
switch two different implementations at run-time.
Change-Id: I0598054ee8a8b499ac686ea635a96f5d03c754e0
Amazingly, asn1_GetSequence isn't completely unused? Keep that around for now
and ditch everything else. This lets us enable C4311 in MSVC which is actually
a pretty reasonable warning.
Change-Id: I43bb9206b1745e8a68224f3a435713d2a74e04ea
Reviewed-on: https://boringssl-review.googlesource.com/4256
Reviewed-by: Adam Langley <agl@google.com>
The unused ex_data index declarations are commented out instead of
removed so that it is clear which values to avoid for any new ex_data
indexes added in the future.
Change-Id: Ia19da9631324492c5c7eeacc71453e6240c73870
Reviewed-on: https://boringssl-review.googlesource.com/3940
Reviewed-by: Adam Langley <agl@google.com>
These functions are useful for implementing non-ASN.1-based protocols
like JSON Web Signature (JWS) and they are even already used within
Chromium.
Change-Id: I58f41ca7beedc5a0b7a8c3da53f319aadff4c0e7
Reviewed-on: https://boringssl-review.googlesource.com/3936
Reviewed-by: Adam Langley <agl@google.com>
decrepit will contain algorithms that we really wish didn't exist any
longer. It won't be built by default in Chromium etc, but the code
will exist for crummy code that still needs it.
Change-Id: Ic307f5f0a69efe9e0a5fd54052f49d219e90dcdd
Sadly, it turns out that we have need of this, at least for now. The
code is taken from upstream and changed only as much as needed.
This only imports keys and doesn't know how to actually perform
operations on them for now.
Change-Id: I0db70fb938186cb7a91d03f068b386c59ed90b84
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
This conceivably has a use, but NSS doesn't do this buffer either and it still
suffers from the same problems as the other uses of record_pqueue. This removes
the last use of record_pqueue. It also opens the door to removing pqueue
altogether as it isn't the right data structure for either of the remaining
uses either. (It's not clear it was right for record_pqueue either, but I don't
feel like digging into this code.)
Change-Id: If8a43e7332b3cd11a78a516f3e8ebf828052316f
Reviewed-on: https://boringssl-review.googlesource.com/4239
Reviewed-by: Adam Langley <agl@google.com>
It was only ever enabled for handshake and alert messages. The comments cite
renego as a use case though even then I'm not clear on why. The only use I see
is if, say, the Finished message and ClientKeyExchange came in out-of-order.
DTLS is unreliable so leaning on retransmit seems fine, and usually flights
will be packed into one packet where possible. NSS doesn't have any such
buffer and doesn't seem to have problems.
The buffering mechanism is also rather dubious. It stows away the entire packet
and read buffer---all 16K of it---and there may have been other records in that
packet.
Change-Id: Ic3b7bf817be380dc73102eec62c690ed093e6667
Reviewed-on: https://boringssl-review.googlesource.com/4238
Reviewed-by: Adam Langley <agl@google.com>
Compression is gone, so don't allow for compression overhead. With that fixed,
the second rr->length check in ssl3_get_record matches the length computation
which sizes the read buffer. The first is wrong and doesn't account for the
alignment padding. Move the second to the first.
Change-Id: I3f4f05de9fdf5c645ff24493bbfdf303dcc1aa90
Reviewed-on: https://boringssl-review.googlesource.com/4236
Reviewed-by: Adam Langley <agl@google.com>
Also check for overflow, although it really shouldn't happen.
Change-Id: I34dfe8eaf635aeaa8bef2656fda3cd0bad7e1268
Reviewed-on: https://boringssl-review.googlesource.com/4235
Reviewed-by: Adam Langley <agl@google.com>
Fix up the variable names. Also avoid the messy logic of checking whether the
label and context collide with the normal key expansion ones in the face of
adverserial inputs. Make that the caller's responsibility, just as it's already
the caller's responsibility to ensure that different calls don't overlap. (The
label should be a constant string in an IANA registry anyway.)
Change-Id: I062fadb7b6a18fa946b883be660ea9b3f0f6277c
Reviewed-on: https://boringssl-review.googlesource.com/4216
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf1101, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
There's multiple sets of APIs for selecting the curve. Fold away
SSL_OP_SINGLE_ECDH_USE as failing to set it is either a no-op or a bug. With
that gone, the consumer only needs to control the selection of a curve, with
key generation from then on being uniform. Also clean up the interaction
between the three API modes in s3_srvr.c; they were already mutually exclusive
due to tls1_check_ec_tmp_key.
This also removes all callers of EC_KEY_dup (and thus CRYPTO_dup_ex_data)
within the library.
Change-Id: I477b13bd9e77eb03d944ef631dd521639968dc8c
Reviewed-on: https://boringssl-review.googlesource.com/4200
Reviewed-by: Adam Langley <agl@google.com>
Along the way, fix a host of missing failure checks. This will save some
headache when it comes time to run these under the malloc failure tests.
Change-Id: I3fd589bd094178723398e793d6bc578884e99b67
Reviewed-on: https://boringssl-review.googlesource.com/4126
Reviewed-by: Adam Langley <agl@google.com>
MIPS64 confusingly sets __mips__, but it's not a 32-bit platform. This
change updates the defines in base.h to recognise MIPS64 based on both
__mips__ and __LP64__ being defined.
Change-Id: I220f5d9c8f1cd7d3089cc013348e6f95cdee76d9
Reviewed-on: https://boringssl-review.googlesource.com/4093
Reviewed-by: Adam Langley <agl@google.com>
(system/keymaster is using them now.)
Change-Id: I8fba501005b9318b7d3a76bf1715fb772b23c49d
Reviewed-on: https://boringssl-review.googlesource.com/4092
Reviewed-by: Adam Langley <agl@google.com>
It's not actually CRYPTO_add_locked, despite the name. I guess they just needed
a name that didn't clash with CRYPTO_add.
Change-Id: I3fdee08bf75e9a4e1b5e75630707c0be5792599b
Reviewed-on: https://boringssl-review.googlesource.com/4102
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
Align with upstream's renames from a while ago. These names are considerably
more standard. This also aligns with upstream in that both "ECDHE" and "EECDH"
are now accepted in the various cipher string parsing bits.
Change-Id: I84c3daeacf806f79f12bc661c314941828656b04
Reviewed-on: https://boringssl-review.googlesource.com/4053
Reviewed-by: Adam Langley <agl@google.com>
(Thanks to William Hesse.)
Change-Id: I8479663250546a5ec0a024f80e50541f91d833bc
Reviewed-on: https://boringssl-review.googlesource.com/4020
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
They do not quite measure the same value for EC keys. "size" is a really weird
notion to generalize on so we should document what it means for each key type.
EVP_PKEY_size's meaning is most tied to signatures, thanks to EVP_SignFinal
implicitly using it as output bounds.
Change-Id: I7504c142818f8f90f8bcf6891c97a6adaf2d574e
Reviewed-on: https://boringssl-review.googlesource.com/4000
Reviewed-by: Adam Langley <agl@google.com>
C99 doesn't, technically, allow empty statements. Thus if a #define'ed
function ends in a semicolon, and the use of it also ends in a
semicolon, then the compiler sees “;;” at the end.
Since a choice has to be made, I prefer that the semicolon exist at the
“callsite” of a #define'ed fuction. But I haven't gone and changed
everything to follow that in this patch.
Change-Id: I1343e52a5ac6255db49aa053048d0df3225bcf43
Reviewed-on: https://boringssl-review.googlesource.com/3890
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
At least the linker can discard this function in the cases where nobody
is calling it.
Change-Id: I30050e918e6bc1dd9c97cc70f3a56408701abebc
Reviewed-on: https://boringssl-review.googlesource.com/3724
Reviewed-by: Adam Langley <agl@google.com>
Because NTLM authentication is still a thing.
Change-Id: I3308a8431c82f0b614e09ce3e5efac1526881f1e
Reviewed-on: https://boringssl-review.googlesource.com/3723
Reviewed-by: Adam Langley <agl@google.com>
This allows the current RC4 state of an SSL* to be extracted. We have
internal uses for this functionality.
Change-Id: Ic124c4b253c8325751f49e7a4c021768620ea4b7
Reviewed-on: https://boringssl-review.googlesource.com/3722
Reviewed-by: Adam Langley <agl@google.com>
This callback receives information about the ClientHello and can decide
whether or not to allow the handshake to continue.
Change-Id: I21be28335fa74fedb5b73a310ee24310670fc923
Reviewed-on: https://boringssl-review.googlesource.com/3721
Reviewed-by: Adam Langley <agl@google.com>
* Eliminate the possibility of multiple lock IDs having the same
value (CRYPTO_LOCK_FIPS2 and CRYPTO_LOCK_OBJ were both 40 prior to
this commit).
* Remove unused lock IDs.
* Automatically guarantee that lock IDs and lock names stay in sync.
Change-Id: If20e462db1285fa891595a7e52404ad011ff16f6
Reviewed-on: https://boringssl-review.googlesource.com/3923
Reviewed-by: Adam Langley <agl@google.com>
No code within BoringSSL or Google (grep for EVP_PKEY_CTX_(ctrl|get|set)) is
sensitive to the various failure cases. Normalize it all to 0/1 for simplicity.
This does carry a slight risk: any new ctrl hooks we import from upstream that,
like EVP_PKEY_CTX_get_rsa_oaep_md, return something other than success/failure
cannot be called directly via EVP_PKEY_CTX_ctrl. They instead need to
internally be routed through a struct like CBS and only called through the
wrappers. To that end, unexport EVP_PKEY_CTX_ctrl and require that callers use
the wrappers. No code in Google uses it directly and, if need be, switching to
the wrapper would be an incredibly upstreamable patch.
Change-Id: I3fd4e5a1a0f3d4d1c4122c52d4c74a5105b99cd5
Reviewed-on: https://boringssl-review.googlesource.com/3874
Reviewed-by: Adam Langley <agl@google.com>
This is the only EVP_PKEY ctrl hook which returns something other than a
boolean.
Change-Id: Ic226aef168abdf72e5d30e8264a559ed5039a055
Reviewed-on: https://boringssl-review.googlesource.com/3873
Reviewed-by: Adam Langley <agl@google.com>
This removes another place where we're internally sensitive to the
success/failure conditions.
Change-Id: I18fecf6457e841ba0afb718397b9b5fd3bbdfe4c
Reviewed-on: https://boringssl-review.googlesource.com/3872
Reviewed-by: Adam Langley <agl@google.com>
All EVP_PKEY types return 1 on that. (It can go away entirely when
EVP_PKEY_HMAC is gone.) This removes a place internally where we're sensitive
to the failure code.
Change-Id: Ic6cda2da9337ba7ef1c66a18e40c5dcc44fcf840
Reviewed-on: https://boringssl-review.googlesource.com/3871
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Replace unsigned long with the appropriate sized integer type.
Change-Id: I7b4641d84568f6c11efa25350a9e488a556fc92e
Reviewed-on: https://boringssl-review.googlesource.com/3766
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
It happens to give the same value anyway (64 + 16), but only on accident.
Change-Id: I1415f4015e3de472dbeb9ada0d92607c9d1bcd40
Reviewed-on: https://boringssl-review.googlesource.com/3780
Reviewed-by: Adam Langley <agl@google.com>
This transcription bug comes from the start of BoringSSL and, as you can
imagine, was a complete delight to track down.
Change-Id: I3051934195098a1d3bf893b154389ec7f14d3609
Reviewed-on: https://boringssl-review.googlesource.com/3740
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Instead, add a separate init_with_direction hook. Normal AEADs ignore the
direction, while legacy AEADs must be initialized with it. This avoids
maintaining extra state to support the delayed initialization.
Change-Id: I25271f0e56ee2783a2fd4d4026434154d58dc0a8
Reviewed-on: https://boringssl-review.googlesource.com/3731
Reviewed-by: Adam Langley <agl@google.com>
There's no good reason to do this, and it doesn't work; HMAC checks the length
of the key and runs it through the hash function if too long. The reuse occurs
after this check.
This allows us to shave 132 bytes off HMAC_CTX as this was the only reason it
ever stored the original key. It also slightly simplifies HMAC_Init_ex's
logic.
Change-Id: Ib56aabc3630b7178f1ee7c38ef6370c9638efbab
Reviewed-on: https://boringssl-review.googlesource.com/3733
Reviewed-by: Adam Langley <agl@google.com>
(There are times when I actually miss C++ templates.)
Change-Id: I3db56e4946ae4fb919105fa33e2cfce3c7542d37
Reviewed-on: https://boringssl-review.googlesource.com/3700
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7b6acc9004beb7b7090de1837814ccdff2e9930e
Reviewed-on: https://boringssl-review.googlesource.com/3680
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
EC_GROUP_copy is an rather unfriendly function; it doesn't work if the groups
have different[*] underlying EC_METHODs, but this notion is not exposed through
the API. I found no callers of EC_GROUP_copy in external code.
This leaves the precompute_mult functions as the remaining mutable API exposed
through EC_GROUP.
[*] Though, of the two EC_METHODs right now, simple.c is entirely unused.
Change-Id: Iabb52518005250fb970e12b3b0ea78b4f6eff4a0
Reviewed-on: https://boringssl-review.googlesource.com/3631
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
(I got this wrong when reading the OpenSSL code.)
Change-Id: Ib289ef41d0ab5a3157ad8b9454d2de96d1f86c22
Reviewed-on: https://boringssl-review.googlesource.com/3620
Reviewed-by: Adam Langley <agl@google.com>
There is exactly one implementation and it doesn't fail. Plus a cleanup
function that can fail is very bad manners; the caller has no choice but to
leak at that point.
Change-Id: I5b524617ef37bc7d92273472fa742416ea7dfd43
Reviewed-on: https://boringssl-review.googlesource.com/3564
Reviewed-by: Adam Langley <agl@google.com>
RC4_CHAR is a bit in the x86(-64) CPUID information that switches the
RC4 asm code from using an array of 256 uint32_t's to 256 uint8_t's. It
was originally written for the P4, where the uint8_t style was faster.
(On modern chips, setting RC4_CHAR took RC4-MD5 from 458 to 304 MB/s.
Although I wonder whether, on a server with many connections, using less
cache wouldn't be better.)
However, I'm not too worried about a slowdown of RC4 on P4 systems these
days (the last new P4 chip was released nine years ago) and I want the
code to be simplier.
Also, RC4_CHAR was set when the CPUID family was 15, but Intel actually
lists 15 as a special code meaning "also check the extended family
bits", which the asm didn't do.
The RC4_CHAR support remains in the RC4 asm code to avoid drift with
upstream.
Change-Id: If3febc925a83a76f453b9e9f8de5ee43759927c6
Reviewed-on: https://boringssl-review.googlesource.com/3550
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
It was a mistake to remove this in the first place.
Change-Id: Icd97b4db01e49151daa41dd892f9da573ddc2842
Reviewed-on: https://boringssl-review.googlesource.com/3541
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This empty header file exists only to make older code compile. But I
named it incorrectly! Upstream doesn't have the underscore in the name.
Change-Id: I96654b7e17d84a5f2810e6eb20fe7bfb22f855fd
Reviewed-on: https://boringssl-review.googlesource.com/3540
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called in outside code. This too seems to be a remnant of the DSA
PKIX optional parameter stuff. This is confirmed both by a removed comment and
by the brief documentation at http://www.umich.edu/~x509/ssleay/x509_pkey.html
RFC 5480 does not allow ECDSA keys to be missing parameters, so this logic is
incorrect for ECDSA anyway. It was also failing to check
EVP_PKEY_copy_parameters' return value. And that logic looks pretty suspect if
you have a chain made up multiple certificate types.
Change-Id: Id6c60659a0162356c7f3eae5c797047366baae1c
Reviewed-on: https://boringssl-review.googlesource.com/3485
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
(Imported from upstream's e83c913723fac7432a7706812f12394aaa00e8ce.)
Change-Id: Id0fc11773a0cee8933978cd4bdbd8251fd7cfb5f
Pass address of X509_VERIFY_PARAM_ID peername to X509_check_host().
(Imported from upstream's 55fe56837a65ff505b492aa6aee748bf5fa91fec.)
Change-Id: Ic21bfb361b8eb25677c4c2175882fa95ea44fc31
(Imported from upstream's 8abffa4a73fcbf6536e0a42d736ed9211a8204ea,
9624b50d51de25bb2e3a72e81fe45032d80ea5c2 and
41e3ebd5abacfdf98461cdeb6fa97a4175b7aad3.)
Change-Id: Ic9099eb5704b19b4500229e89351371cc6184f9d
clang-format has changed a little. This is a semantic no-op but it makes
the diff in the next change smaller.
Change-Id: Ia492a81340a868b888d619a1c7740d1a86845e92
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
Some files in crypto/x509 were moved from crypto/asn1, so they emit errors from
another module. Fix make_errors.go to account for this: cross module errors
must use the foreign module as the first argument to OPENSSL_PUT_ERROR. Both
the function code and the error code should be declared in the foreign module.
Update make_errors.go to ignore cross-module error lines when deciding which
function tokens to emit.
Change-Id: Ic38377ddd56e22d033ef91318c30510762f6445d
Reviewed-on: https://boringssl-review.googlesource.com/3383
Reviewed-by: Adam Langley <agl@google.com>
Also, Clang doesn't like static asserts with the same message and
ERR_free_strings should still free the error queues, although it's badly
misnamed now.
Change-Id: Ibff8eb50f93c0b56c3eeb17a300e8501a31c3ab8
Reviewed-on: https://boringssl-review.googlesource.com/3370
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
OpenSSL's internal names for the ciphers are not the standard ones and are not
easy to consistently map to the standard ones. Add an API to get the real names
out. (WebRTC wants an API to get the standard names out.)
Also change some incorrect flags on SHA-256 TLS 1.2 ciphers;
SSL_HANDSHAKE_MAC_DEFAULT and SSL_HANDSHAKE_MAC_SHA256 are the same after TLS
1.2. A TLS 1.2 cipher should be tagged explicitly with SHA-256. (This avoids
tripping a check in SSL_CIPHER_get_rfc_name which asserts that default-hash
ciphers only ever use SHA-1 or MD5 for the bulk cipher MAC.)
Change-Id: Iaec2fd4aa97df29883094d3c2ae60f0ba003bf07
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
The ENGINE code had a concept of a stable-ABI for METHODs, because that
might be a useful thing in the future when people want to have blobs
that wrap PKCS#11 or something.
However, at the moment nobody uses this feature and it didn't work very
well anyway: I hadn't updated |ENGINE_free| to free them all and
|set_method| was copying the methods, but not resetting the |is_static|
flag.
This change removes support for non-static methods. We can always put it
back later if we need.
Change-Id: Ic7401c8cb1cadd46b26a215f85bc48562efe9919
Reviewed-on: https://boringssl-review.googlesource.com/3300
Reviewed-by: Adam Langley <agl@google.com>
SSL_AEAD_CTX ownership is currently too confusing. Instead, rely on the lack of
renego, so the previous epoch always uses the NULL cipher. (Were we to support
DTLS renego, we could keep track of s->d1->last_aead_write_ctx like
s->d1->last_write_sequence, but it isn't worth it.)
Buffered messages also tracked an old s->session, but this is unnecessary. The
s->session NULL check in tls1_enc dates to the OpenSSL initial commit and is
redundant with the aead NULL check.
Change-Id: I9a510468d95934c65bca4979094551c7536980ae
Reviewed-on: https://boringssl-review.googlesource.com/3234
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
Tag number 31 is a long form tag that requires multiple octets. It
cannot be handled by adding a single uint8. Changed CBB_add_asn1()
to return 0 when it is passed in the extension for tag 31.
Change-Id: Ia33936d4f174d1a7176eb11da0b5c7370efb9416
CBS_get_asn1() and CBS_get_any_asn1_element() only support the single
byte ASN.1 identifier octets (aka short form tags). Tag number 31 is
the start of the multi-byte long form per X.690 section 8.1.2.4.
Change-Id: I892600f4946e880a4ff03d219181116ef04f5372
Reviewed-on: https://boringssl-review.googlesource.com/3241
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Forgot to export those when adding them.
Change-Id: I206f488eb38e5ff55b8c212911aced0cf28b7664
Reviewed-on: https://boringssl-review.googlesource.com/3090
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 2747d73c1466c487daf64a1234b6fe2e8a62ac75.)
Also fix up some stylistic issues in conf.c and clarify empty case in
documentation.
Change-Id: Ibacabfab2339d7566d51db4b3ac4579aec0d1fbf
Reviewed-on: https://boringssl-review.googlesource.com/3023
Reviewed-by: Adam Langley <agl@google.com>
Since we can't update wpa_supplicant nearly as fast as we would like, we
need to try and keep it happy. Unfortunately, the recent switch to
EVP_AEAD breaks it so this dismal change adds some dummy variables that
will allow it to compile.
Change-Id: I03d6b81c30bbebc07af3af0d6cda85a26b461edf
Reviewed-on: https://boringssl-review.googlesource.com/2960
Reviewed-by: Adam Langley <agl@google.com>
Missing newlines. I think they got lost in some patch reordering.
Change-Id: Ib1e5833623f4ef613965d32b4e82ba18b6a551e6
Reviewed-on: https://boringssl-review.googlesource.com/2970
Reviewed-by: Adam Langley <agl@google.com>
Before it was possible to pass a NULL-terminated C-string to the PBKDF2
functions, and indicate the parameter was a C-string by passing a length
of -1.
This is not relied on anywhere in the BoringSSL code, and the API contract is
possible to misuse as it is not the common way of doing things.
(A problem would arise when passing in a large unsigned length that
subsequently gets interpreted as -1).
Change-Id: Ifbd31ff76e183fa74e9fa346908daf4bfb8fc3da
Reviewed-on: https://boringssl-review.googlesource.com/2953
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
As feared, 2bca0988 did cause some leak checkers to get upset about the
state_hash pointer getting cleared.
This change makes err_shutdown free all the error queues to try and
avoid this. Hopefully this doesn't upset TSAN in turn.
BUG=448296
Change-Id: I827da63c793dcabc73168ece052cdcd3d3cc64e3
Reviewed-on: https://boringssl-review.googlesource.com/2890
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
With GCC 4.9 and -O2 (and only -O2, -O1 and -O3 didn't trigger it), the
Poly1305 code can end up writing to an unaligned address otherwise and
that triggers a bus error on ARM.
Change-Id: Ifbeb7e2066a893d91d6f63c6565bac7d5542ef81
Reviewed-on: https://boringssl-review.googlesource.com/2850
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
SSL_library_init already loads the error strings (unlike upstream). Code which
calls both will end up loading error strings twice. Instead make the second
call a no-op.
Change-Id: Ifd34ab20ed46aabeba14661e58f8dac2bbb29f69
Reviewed-on: https://boringssl-review.googlesource.com/2790
Reviewed-by: Adam Langley <agl@google.com>
Removes a bit of unused code. This effectively reverts upstream's
25af7a5dbc05c7359d1d7f472d50d65a9d876b7e. It's new with OpenSSL 1.0.2 so
nothing can be using it yet. We can restore it with tests if we end up wanting
it later.
(Also I think it might be misnamed. The KDF seems to be defined in X9.63, not
X9.62.)
Change-Id: I482daf681e0cf5c3bbdc72c57793f91448deaee8
Reviewed-on: https://boringssl-review.googlesource.com/2846
Reviewed-by: Adam Langley <agl@google.com>
The use in s3_srvr.c doesn't care (it doesn't even have to be in bounds), but
it's good to have the value be initialized and not a function of the input.
(The old uninitialized case wasn't hit in s3_srvr.c because of the earlier
bounds check.)
Change-Id: Ib6b418b3c140aa564f8a46da3d34bb2b69f06195
Reviewed-on: https://boringssl-review.googlesource.com/2845
Reviewed-by: Adam Langley <agl@google.com>
Add some missing headers and ensure each header has a short description. doc.go
gets confused at declarations that break before the first (, so avoid doing
that. Also skip a/an/deprecated: in markupFirstWord and process pipe words in
the table of contents.
Change-Id: Ia08ec5ae8e496dd617e377e154eeea74f4abf435
Reviewed-on: https://boringssl-review.googlesource.com/2839
Reviewed-by: Adam Langley <agl@google.com>
According to X6.90 null, object identifier, boolean, integer and enumerated
types can only have primitive encodings: return an error if any of
these are received with a constructed encoding.
(Imported from upstream's 89f40f369f414b52e00f7230b0e3ce99e430a508.)
Change-Id: Ia5d15eef72e379119f50fdbac4e92c4761bf5eaf
Reviewed-on: https://boringssl-review.googlesource.com/2835
Reviewed-by: Adam Langley <agl@google.com>
Based in part on upstream's cf75017bfd60333ff65edf9840001cd2c49870a3. This
situation really shouldn't be able to happen, but between no static asserts
that the minimum MTU is always large enough and a bug in reseting the MTU later
(to be fixed be a follow-up import from upstream), check these and return a
useful error code.
Change-Id: Ie853e5d35a6a7bc9c0032e74ae71529d490f4fe2
Reviewed-on: https://boringssl-review.googlesource.com/2825
Reviewed-by: Adam Langley <agl@google.com>
As of our 82b7da271f, an SSL_SESSION created
externally always has a cipher set. Unknown ciphers are rejected early. Prior
to that, an SSL_SESSION would only have a valid cipher or valid cipher_id
depending on whether it came from an internal or external session cache.
See upstream's 6a8afe2201cd888e472e44225d3c9ca5fae1ca62 and
c566205319beeaa196e247400c7eb0c16388372b for more context.
Since we don't get ourselves into this strange situation and s->cipher is now
always valid for established SSL_SESSION objects (the existence of
unestablished SSL_SESSION objects during a handshake is awkward, but something
to deal with later), do away with s->cipher_id altogether. An application
should be able to handle failing to parse an SSL_SESSION instead of parsing it
successfuly but rejecting all resumptions.
Change-Id: I2f064a815e0db657b109c7c9269ac6c726d1ffed
Reviewed-on: https://boringssl-review.googlesource.com/2703
Reviewed-by: Adam Langley <agl@google.com>
Now that BoringSSL no longer uses it internally, deprecate it until we can get
any Google code off it and remove it altogether.
Change-Id: I0e15525600b27a65f84b4bb820b879b2424a0ef7
Reviewed-on: https://boringssl-review.googlesource.com/2701
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
This introduces another knob into SSL_AEAD_CTX to omit the version from the ad
parameter. It also allows us to fold a few more SSL3_ENC_METHOD hooks together.
Change-Id: I6540d410d4722f734093554fb434dab6e5217d4f
Reviewed-on: https://boringssl-review.googlesource.com/2698
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
Fix up the generate_master_secret parameter while we're here.
Change-Id: I1c80796d1f481be0c3eefcf3222f2d9fc1de4a51
Reviewed-on: https://boringssl-review.googlesource.com/2696
Reviewed-by: Adam Langley <agl@google.com>
HMAC_CTX_copy's documentation is off. It actually follows the old copy
functions which call FOO_init on dest first. Notably this means that they leak
memory if dest is currently in use.
Add HMAC_CTX_copy_ex as an analog of EVP_MD_CTX_copy and deprecate
HMAC_CTX_copy. (EVP_CIPHER_CTX_copy, in contrast, was correct from the start.)
Change-Id: I48566c858663d3f659bd356200cf862e196576c9
Reviewed-on: https://boringssl-review.googlesource.com/2694
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
The extra free in ex_data_impl.c is fixing a mistake: when calling
|CRYPTO_cleanup_all_ex_data| the |EX_CLASS_ITEM| itself wouldn't be
freed.
The change in err_impl.c is to free the thread-id hash also. This allows
programs to free absolutely all memory allocated by BoringSSL, which
allows fuzz testing to find any memory leaks.
Change-Id: I1e518adf2b3e0efa7d7f00f7ab4e65e1dc70161e
Reviewed-on: https://boringssl-review.googlesource.com/2670
Reviewed-by: Adam Langley <agl@google.com>
DSA_verify and DSA_check_signature didn't share a codepath, so the fix was only
applied to the former. Implement verify in terms of check_signature and add
tests for bad DER variants.
Change-Id: I6577f96b13b57fc89a5308bd8a7c2318defa7ee1
Reviewed-on: https://boringssl-review.googlesource.com/2820
Reviewed-by: Adam Langley <agl@google.com>
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject the
signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the certificate
signature. NB: this will result in signature failure errors for some broken
certificates.
3. Check DSA/ECDSA signatures use DER.
Reencode DSA/ECDSA signatures and compare with the original received signature.
Return an error if there is a mismatch.
This will reject various cases including garbage after signature (thanks to
Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS program for
discovering this case) and use of BER or invalid ASN.1 INTEGERs (negative or
with leading zeroes).
CVE-2014-8275
(Imported from upstream's 85cfc188c06bd046420ae70dd6e302f9efe022a9 and
4c52816d35681c0533c25fdd3abb4b7c6962302d)
Change-Id: Ic901aea8ea6457df27dc542a11c30464561e322b
Reviewed-on: https://boringssl-review.googlesource.com/2783
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Some parts of Android can't be updated yet so this change adds
declarations (only) for some functions that will be stubbed in
Android-specific code. (That Android-specific code will live in the
Android repo, not the BoringSSL repo.)
Trying to use these functions outside of Android will result in a link
error.
Change-Id: Iaa9b956e6408d21cd8fc34d90d9c15657e429877
Reviewed-on: https://boringssl-review.googlesource.com/2760
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
I typoed this word and then auto-complete duplicated it all over the
place. This change fixes all the comments.
This change has no semantic effect (comment only).
Change-Id: I8952e9e71302043574757cd74a05e66500008432
Add a dedicated error code to the queue for a handshake_failure alert in
response to ClientHello. This matches NSS's client behavior and gives a better
error on a (probable) failure to negotiate initial parameters.
BUG=https://crbug.com/446505
Change-Id: I34368712085a6cbf0031902daf2c00393783d96d
Reviewed-on: https://boringssl-review.googlesource.com/2751
Reviewed-by: Adam Langley <agl@google.com>
Since this is C89 we need to maintain this ancient practice.
Change-Id: I7223e7c38a35cf551b6e3c9159d2e21ebf7e62be
Reviewed-on: https://boringssl-review.googlesource.com/2631
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It doesn't retain partial blocks but it DOES update internal cipher state. ssl/
depends on this property.
Change-Id: I1e44b612c2e1549e096de8b71726007dcbc68de3
Reviewed-on: https://boringssl-review.googlesource.com/2640
Reviewed-by: Adam Langley <agl@google.com>
Turns out the EVP_CIPH_FLAG_CUSTOM_CIPHER ciphers (i.e. legacy EVP_CIPHER
AES-GCM) have a completely different return value setup than the normal ones
which are the standard one/zero. (Except that they never return zero; see
TODO.)
Fix checks in ssl/ and remove remnants of EVP_CIPH_FLAG_CUSTOM_CIPHER in ssl/
as we're using EVP_AEAD now.
See CHANGES entry added in upstream's 3da0ca796cae6625bd26418afe0a1dc47bf5a77f.
Change-Id: Ia4d0ff59b03c35fab3a08141c60b9534cb7172e2
Reviewed-on: https://boringssl-review.googlesource.com/2606
Reviewed-by: Adam Langley <agl@google.com>
This avoids needing a should_add_to_finished_hash boolean on do_write. The
logic in do_write was a little awkward because do_write would be called
multiple times if the write took several iterations. This also gets complex if
DTLS retransmits are involved. (At a glance, it's not obvious the
BIO_CTRL_DGRAM_MTU_EXCEEDED case actually works.)
Doing it as the handshake message is being prepared avoids this concern. It
also gives a natural point for the extended master secret logic which needs to
do work after the finished hash has been sampled.
As a bonus, we can remove s->d1->retransmitting which was only used to deal
with this issue.
Change-Id: Ifedf23ee4a6c5e08f960d296a6eb1f337a16dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2604
Reviewed-by: Adam Langley <agl@google.com>
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Tested manually by replacing SSLv23_method() with TLSv1_2_method() in
bssl_shim. This is a large chunk of code which is not run in SSLv23_method(),
but it will be run after unification. It's split out separately to ease review.
Change-Id: I6bd241daca17aa0f9b3e36e51864a29755a41097
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Missed this one. It requires that we be able to change an SSL_METHOD after the
after, which complicates compiling the version locking into min_version /
max_version configurations.
Change-Id: I24ba54b7939360bbfafe3feb355a65840bda7611
Reviewed-on: https://boringssl-review.googlesource.com/2579
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE isn't a possible state anymore. It seems this state meant the
side wasn't known, back in the early SSLeay days. Now upstream guesses
(sometimes incorrectly with generic methods), and we don't initialize until
later. SSL_shutdown also doesn't bother to call ssl3_shutdown at all if the
side isn't initialized and SSL_ST_BEFORE isn't the uninitialized state, which
seems a much more sensible arrangement.
Likewise, because bare SSL_ST_BEFOREs no longer exist, SSL_in_init implies
SSL_in_before and there is no need to check both.
Change-Id: Ie680838b2f860b895073dabb4d759996e21c2824
Reviewed-on: https://boringssl-review.googlesource.com/2564
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
All serialization functions take point format as input, and
asn1_form is never used.
Change-Id: Ib1ede692e815ac0c929e3b589c3a5869adb0dc8b
Reviewed-on: https://boringssl-review.googlesource.com/2511
Reviewed-by: Adam Langley <agl@google.com>
According to rfc5480 and rfc4492 the hybrid format is not allowed
neither in certificates or the tls protocol.
Change-Id: I1d3fb5bef765bc7b58d29bdd60e15247fac4dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2510
Reviewed-by: Adam Langley <agl@google.com>
Some code predated the RFCs themselves, but the RFCs now exist. Also remove
now obsolete comments and some unused #defines.
See upstream's cffeacd91e70712c99c431bf32a655fa1b561482. (Though this predates
it; I just remembered I never uploaded it.)
Change-Id: I5e56f0ab6b7f558820f72e84dfdbc71a8c23cb91
Reviewed-on: https://boringssl-review.googlesource.com/2475
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
The files should round-trip now. This corrects some discrepancies between
obj_mac.h and obj_mac.num which were also present in upstream. There seems to
be a mismerge in upstream's eebd5e5dd7dff58297ea52e1c21df8fccd593965.
(The discrepancy is harmless; those OIDs are not in obj_xref.txt.)
Change-Id: I1f6cda016533ec3182750310f9936f7e072b54a0
Reviewed-on: https://boringssl-review.googlesource.com/2474
Reviewed-by: Adam Langley <agl@google.com>
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
Use it in ssl3_cert_verify_hash so signing a pre-TLS-1.2 handshake hash can go
through RSA_sign and be intercepted via RSA_METHOD appropriately. This avoids
Windows needing to intercept sign_raw. (CAPI keys cannot provide sign_raw,
unless the input size happens to be that of NID_md5_sha1.)
Also use it in processing ServerKeyExchange to avoid special-casing RSA.
BUG=crbug.com/437023
Change-Id: Ia07433f468b75fdf7bfc8fa90c9751639b2478e6
Reviewed-on: https://boringssl-review.googlesource.com/2420
Reviewed-by: David Benjamin <davidben@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
If SSL_clear is called before SSL_set_{connect,accept}_state (as SSL_new does
internally), s->state will get set prematurely. Likewise, s->server is set
based on the method's ssl_accept hook, but client SSL's may be initialized from
a generic SSL_METHOD too.
Since we can't easily get rid of the generic SSL_METHODs, defer s->state and
s->server initialization until the side is known.
Change-Id: I0972e17083df22a3c09f6f087011b54c699a22e7
Reviewed-on: https://boringssl-review.googlesource.com/2439
Reviewed-by: Adam Langley <agl@google.com>
It's unused. Also per the previous commit message, it historically had a bug
anyway.
Change-Id: I5868641e7938ddebbc0ffd72d218c81cd17c7739
Reviewed-on: https://boringssl-review.googlesource.com/2437
Reviewed-by: Adam Langley <agl@google.com>
It should already be assigned, as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73. I believe these assignments are part
of the reason it used to appear to work. Replace them with assertions. So the
assertions are actually valid, check in SSL_connect / SSL_accept that they are
never called if the socket had been placed in the opposite state. (Or we'd be
in another place where it would have appeared to work with the handshake
functions fixing things afterwards.)
Now the only places handshake_func is set are in SSL_set_{connect,accept}_state
and the method switches.
Change-Id: Ib249212bf4aa889b94c35965a62ca06bdbcf52e1
Reviewed-on: https://boringssl-review.googlesource.com/2432
Reviewed-by: Adam Langley <agl@google.com>
We intend to deprecate the version-locked methods and unify them. Don't expose
that there's a method swap. (The existing version-locked methods will merely be
a shorthand for configuring minimum/maximum versions.)
There is one consumer of SSL_get_ssl_method in internal code, but it's just
some logging in test-only code. All it's doing is getting the version as a
string which should be SSL_get_version instead.
While here, also remove dead ssl_bad_method function. Also the bogus
ssl_crock_st forward-declaration. The forward declaration in base.h should be
perfectly sufficient.
Change-Id: I50480808f51022e05b078a285f58ec85d5ad7c8e
Reviewed-on: https://boringssl-review.googlesource.com/2408
Reviewed-by: Adam Langley <agl@google.com>
b9cc33a4d6 deleted its documentation rather than
SSL_OP_EPHEMERAL_RSA's.
Change-Id: I2e099a2dc498f145c5a3ccaac824edbda27f7e89
Reviewed-on: https://boringssl-review.googlesource.com/2407
Reviewed-by: Adam Langley <agl@google.com>
They're mapped to the same value, which is the only reason the tests work right
now.
Change-Id: I22f6e3a6b3a2c88b0f92b6d261e86111b4172cd6
Reviewed-on: https://boringssl-review.googlesource.com/2406
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
The data is owned by the SSL_SESSION, so the caller should not modify it. This
will require changes in Chromium, but they should be trivial.
Change-Id: I314718530c7d810f7c7b8852339b782b4c2dace1
Reviewed-on: https://boringssl-review.googlesource.com/2409
Reviewed-by: Adam Langley <agl@google.com>
Don't use |BIO_set_foo_buffer_size| when setting the
sizes of the buffers while making buffer pair. Since it
happens in pair.c we know the BIOs are BIO pairs and using
bio_ctrl here complicates setting external buffers. Also
zero out bio_bio_st during construction.
This fixes a problem that would happen if the default buffer
sizes were not set, since buf_externally_allocated was
not yet initialized.
Remove BIO_C_SET_BUFF_SIZE and BIO_CTRL_RESET which are
not used for bio pairs.
Change-Id: I365091d5f44f6f1c5522c325a771bdf03d8fe950
Reviewed-on: https://boringssl-review.googlesource.com/2370
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
This is intended for TLS client auth with Windows CAPI- and CNG-backed keys
which implement sign over sign_raw and do not support all hash functions. Only
plumbed through RSA for now.
Change-Id: Ica42e7fb026840f817a169da9372dda226f7d6fd
Reviewed-on: https://boringssl-review.googlesource.com/2250
Reviewed-by: Adam Langley <agl@google.com>
Also add functionality for setting external buffers to give the
caller better control of the buffers. This is typical needed if OS
sockets can outlive the bio pair.
Change-Id: I500f0c522011ce76e9a9bce5d7b43c93d9d11457
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This is an experimental flag that dates back to SSLeay 0.8.1b or earlier. It's
never set internally and never set in consumers.
Change-Id: I922583635c9f3d8d93f08f1707531ad22a26ae6a
Reviewed-on: https://boringssl-review.googlesource.com/2214
Reviewed-by: Adam Langley <agl@google.com>
r and s are scalars, not EC coordinates.
Change-Id: I46a20215d3c602559c18c74a1da9a91543ea73ca
Reviewed-on: https://boringssl-review.googlesource.com/2240
Reviewed-by: Adam Langley <agl@google.com>
Parameters like these should not change between 32-bit and 64-bit. 64 is also
the value recommended in RFC 6347, section 4.1.2.6. Document those fields while
I'm here.
Change-Id: I8481ee0765ff3d261a96a2e1a53b6ad6695b2d42
Reviewed-on: https://boringssl-review.googlesource.com/2222
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
One of them was never implemented upstream or downstream. The other no longer
works in BoringSSL. They're not used within BoringSSL (this still compiles),
even in X509_INFO, and do not appear to be used by consumers. If they were, we
would like to know via a compile failure.
This removes the last consumer within BoringSSL of the ASN.1 parsing macros.
Change-Id: Ifb72b1fcd0a4f7b3e6b081486f8638110872334b
Reviewed-on: https://boringssl-review.googlesource.com/2203
Reviewed-by: Adam Langley <agl@google.com>
Remove the existing md5_test and sha1_test. They now are all covered by
digest_test. For good measure, test the one-shot functions too.
Change-Id: I8e144cc563fb8817144e26cbd2e10c15642464ba
Reviewed-on: https://boringssl-review.googlesource.com/2211
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
This code isn't compiled in. It seems there was some half-baked logic for a
7-byte alert that includes more information about handshake messages
retransmit.
No such alert exists, and the code had a FIXME anyway. If it gets resurrected
in DTLS 1.3 or some extension, we can deal with it then.
Change-Id: I8784ea8ee44bb8da4b0fe5d5d507997526557432
Reviewed-on: https://boringssl-review.googlesource.com/2121
Reviewed-by: Adam Langley <agl@google.com>
This is no longer used but, by retaining it, we might miss cases where
code is still testing against it.
Change-Id: I40ed47e41f903aaf2c5e5354d4348f8890021382
Reviewed-on: https://boringssl-review.googlesource.com/2110
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
X509_NAME is one of the symbols that collide with wincrypt.h. Move it to x509.h
so libraries which only use the pure-crypto portions of BoringSSL without X.509
needn't have to resolve the collision.
Change-Id: I057873498e58fe4a4cf264356f9a58d7a15397b7
Reviewed-on: https://boringssl-review.googlesource.com/2080
Reviewed-by: Adam Langley <agl@google.com>
It was already almost there. Just a malloc failure away. now all the
EVP_Digest{Sign,Verify}* functions may be used without worrying about -1 return
values.
Change-Id: I96a9750b300010615979bd5f1522b1d241764665
Reviewed-on: https://boringssl-review.googlesource.com/2064
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the old two-pass version of the function. If the ticket is too long,
replace it with a placeholder value but keep the connection working.
Change-Id: Ib9fdea66389b171862143d79b5540ea90a9bd5fb
Reviewed-on: https://boringssl-review.googlesource.com/2011
Reviewed-by: Adam Langley <agl@google.com>
The old ones inverted their return value. Add SSL_(CTX_)set_srtp_profiles which
return success/failure correctly and deprecate the old functions. Also align
srtp.h with the new style since it's very short.
When this rolls through, we can move WebRTC over to the new ones.
Change-Id: Ie55282e8858331910bba6ad330c8bcdd0e38f2f8
Reviewed-on: https://boringssl-review.googlesource.com/2060
Reviewed-by: Adam Langley <agl@google.com>
No more need for all the macros. For now, this still follows the two-pass i2d_*
API despite paying a now-unnecessary malloc. The follow-on commit will expose a
more reasonable API and deprecate this one.
Change-Id: I50ec63e65afbd455ad3bcd2f1ae3c782d9e8f9d2
Reviewed-on: https://boringssl-review.googlesource.com/2000
Reviewed-by: Adam Langley <agl@google.com>
Do away with all those unreadable macros. Also fix many many memory leaks in
the SSL_SESSION reuse case. Add a number of helper functions in CBS to help
with parsing optional fields.
Change-Id: I2ce8fd0d5b060a1b56e7f99f7780997fabc5ce41
Reviewed-on: https://boringssl-review.googlesource.com/1998
Reviewed-by: Adam Langley <agl@google.com>
Companion to CBS_get_asn1_uint64. Also add tests for both the parsing and the
serializing.
Change-Id: Ic5e9a0089c88b300f874712d0e9964cb35a8c40b
Reviewed-on: https://boringssl-review.googlesource.com/1999
Reviewed-by: Adam Langley <agl@google.com>
This was there since OpenSSL's initial commit and doesn't appear to serve any
purpose anymore. There's also an instance in x509_vfy.h, but this does not
actually appear to be a no-op because the headers include each other.
Change-Id: I6dee04538bdb3fd91a5da3c71c9d0027443b6bbc
Reviewed-on: https://boringssl-review.googlesource.com/2020
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
Intended to make parsing ASN.1 structures with OPTIONAL elements easier. (Just
attempting to parse the next tag doesn't distinguish between a malformed CBS
which has now been partially advanced and an optional tag mismatch.)
Change-Id: Idceb3dfd6ec028e87e1bc5aaddcec177b0c32150
Reviewed-on: https://boringssl-review.googlesource.com/1995
Reviewed-by: Adam Langley <agl@google.com>
The same library code applies for both the error and the function, so modules
cannot easily report errors from each other. Switch evp/algorithm.c's error
codes to the EVP library. Remove the original error codes so it's obvious some
changes are needed.
- X509_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED -> EVP_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED
ASN1_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED -> EVP_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED
(Actually, the X509 version of this error code doesn't exist in OpenSSL. It should
have been ASN1.)
- ASN1_R_UNKNOWN_SIGNATURE_ALGORITHM -> EVP_R_UNKNOWN_SIGNATURE_ALGORITHM
- ASN1_R_WRONG_PUBLIC_KEY_TYPE -> EVP_R_WRONG_PUBLIC_KEY_TYPE
- ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM -> EVP_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM
Change-Id: I05b1a05b465d800c85f7d63ca74588edf40847b9
Reviewed-on: https://boringssl-review.googlesource.com/1940
Reviewed-by: Adam Langley <agl@google.com>
Implementations of ENGINEs often don't want to implement every function.
This change adds an error code for those situations.
Change-Id: Id6b7eace36d06ffad7f347f556d942d447d8a2fd
Reviewed-on: https://boringssl-review.googlesource.com/1920
Reviewed-by: Wan-Teh Chang <wtc@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Factor the AlgorithmIdentifier portions of ASN1_item_sign and ASN1_item_verify
out. This makes it possible to initialize a signature context from an
AlgorithmIdentifier without needing the data parsed into an ASN1_ITEM/void*
pair and reserialized.
Change-Id: Idc2e06b1310a3f801aa25de323d39d2b7a44ef50
Reviewed-on: https://boringssl-review.googlesource.com/1916
Reviewed-by: Adam Langley <agl@google.com>
Verified that nothing uses it.
Change-Id: I1755144129e274f3d1680ddb8cb12273070eb078
Reviewed-on: https://boringssl-review.googlesource.com/1912
Reviewed-by: Adam Langley <agl@google.com>
One ASN1_R_UNKNOWN_FORMAT got mispelled into ASN1_R_UNKOWN_FORMAT and
duplicated.
Change-Id: If123ef848ffe68afa021f5f3e3fb08eac92c5f94
Reviewed-on: https://boringssl-review.googlesource.com/1911
Reviewed-by: Adam Langley <agl@google.com>
I misunderstood the OpenSSL semantics here. When receiving an error data
pointer via ERR_get_error_line_data and friends, although the error is
cleared, OpenSSL retains ownership of the data pointer. It's kept in the
cleared error until another error overrides it, or the whole error queue
is cleared.
It's pretty odd to have live pointers in empty errors so this change
allows an error queue to retain one data pointer. Thus the pointer
returned from ERR_get_error_line_data is valid until the next call to
ERR_get_error_line_data, or until the queue is freed.
From reviewing uses of the API, this is sufficient for all of them.
Change-Id: I73cb8e9c792452ae3c1a934ac8bbe8b5353b65b2
Reviewed-on: https://boringssl-review.googlesource.com/1880
Reviewed-by: Adam Langley <agl@google.com>
The minimum buffer size requirements on some were off.
Change-Id: I3eabe3dc352e4333efedb40aa071daa2f2ea0db2
Reviewed-on: https://boringssl-review.googlesource.com/1902
Reviewed-by: Adam Langley <agl@google.com>
Fill in some missing "and returns 1" documentation. Really they all do but some
of _Final functions have codepaths to guard against user error.
Change-Id: I16e12ec20ab59e3ba6deaa4cfd67574ed0a56652
Reviewed-on: https://boringssl-review.googlesource.com/1901
Reviewed-by: Adam Langley <agl@google.com>
The corresponding constants are ints, so these should match. This
appeases MSVC on some Chromium DCHECK.
Change-Id: I7a5db41fa072c2850841a102917163af5e90d860
Reviewed-on: https://boringssl-review.googlesource.com/1867
Reviewed-by: Adam Langley <agl@google.com>
This removes the need to track the client cipher list in the SSL_SESSION. It
also eliminates a field in SSL_SESSION that wasn't serialized by
i2d_SSL_SESSION. It's only used to implement SSL_get_shared_ciphers which is
only used by debug code.
Moreover, it doesn't work anyway. The SSLv2 logic pruned that field to the
common ciphers, but the SSLv3+ logic just stores the client list as-is. I found
no internal callers that were actually compiled (if need be we can stub in
something that always returns the empty string or so).
Change-Id: I55ad45964fb4037fd623f7591bc574b2983c0698
Reviewed-on: https://boringssl-review.googlesource.com/1866
Reviewed-by: Adam Langley <agl@google.com>
Windows is much pickier about dllimport/dllexport. Declare it on
the declaration, not the definition. Also ensure that the declaration
precedes the definition. Finally, remove a stray OPENSSL_EXPORT.
Change-Id: Id50b9de5acbe5adf1b15b22dd60b7a5c13a80cce
Reviewed-on: https://boringssl-review.googlesource.com/1862
Reviewed-by: Adam Langley <agl@google.com>
We patch bugs into the runner implementation for testing, not our own.
Change-Id: I0a8ac73eaeb70db131c01a0fd9c84f258589a884
Reviewed-on: https://boringssl-review.googlesource.com/1845
Reviewed-by: Adam Langley <agl@google.com>
This reduces the delta for getting Android to compile and avoids having
Android carry around diffs to upstream versions of tcpdump.
Change-Id: I7f4cbb22b7a0f246bbebe960ca2139f0f42e14a0
Reviewed-on: https://boringssl-review.googlesource.com/1830
Reviewed-by: Adam Langley <agl@google.com>
In order to minimise the upstream diffs needed for bits of Android to
build with BoringSSL, this change implements the old style PKCS#12
functions as wrappers around the modern parser.
The function to read all the contents of a BIO could almost be a utility
function but I'll wait until there are two uses for it first.
The important change from the original functions is that these will
always read the complete buffer/BIO/FILE passed in. Based on a survey of
uses of d2i_PKCS12 that I found, this appears to be universally what
callers want anyway.
Change-Id: I3f5b84e710b161d975f91f4d16c83d44371368d1
Reviewed-on: https://boringssl-review.googlesource.com/1791
Reviewed-by: Adam Langley <agl@google.com>
Android requested that the wpa_supplicant go upstream. This change adds
some dummy functions and reinstates DSA_dup_DH in order to make the diff
smaller and easier for upstream.
Change-Id: I77ac271b8652bae5a0bbe16afde51d9096f3dfb5
Reviewed-on: https://boringssl-review.googlesource.com/1740
Reviewed-by: Adam Langley <agl@google.com>
This gives inappropriate_fallback and close_notify sent during the handshake
error strings. It'd also avoid having to write
case SSL_AD_REASON_OFFSET + SSL_AD_CLOSE_NOTIFY:
in Chromium.
Change-Id: I42123d5452eb7843ead883d112e58b3f087d3067
Reviewed-on: https://boringssl-review.googlesource.com/1780
Reviewed-by: Adam Langley <agl@google.com>
Chromium does not like static initializers, and the CPU logic uses one to
initialize CPU bits. However, the crypto library lacks an explicit
initialization function, which could complicate (no compile-time errors)
porting existing code which uses crypto/, but not ssl/.
Add an explicit CRYPTO_library_init function, but make it a no-op by default.
It only does anything (and is required) if building with
BORINGSSL_NO_STATIC_INITIALIZER.
Change-Id: I6933bdc3447fb382b1f87c788e5b8142d6f3fe39
Reviewed-on: https://boringssl-review.googlesource.com/1770
Reviewed-by: Adam Langley <agl@google.com>
04dbb7f1d1 added tests for the pqueue
functions. However, when building as a shared library, the test binary
needs access to the raw pqueue functions which require them to be
exported.
Change-Id: Iffb22fec491082ff43f06a7119560610425cf20e
Reviewed-on: https://boringssl-review.googlesource.com/1711
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Update SSL_OP_ALL to account for SSL_OP_CRYPTOPRO_TLSEXT_BUG being gone,
and update ssl3_setup_write_buffer to account for SSL_MODE_CBC_RECORD_SPLITTING
rather than the now defunct SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
Also remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is to allow for a buggy peer
which pads CBC with N bytes of value N rather than N+1 bytes of value N. This
quirk has been broken since CBC padding checks became constant-time, as
demonstrated by this attempt at a test. (Instead of just decrementing
padding_length, it needs to also keep track of a separate padding_value and not
decrement that one.)
https://boringssl-review.googlesource.com/#/c/1690/
(The quirk would also fall over anyway if the buggy client ever did a session
resumption; then the server speaks first rather than the client, and the quirk
triggered on reading the first encrypted record from the peer.)
Change-Id: I19942dc629a47832aead77a46bb50e0b0a9780b3
Reviewed-on: https://boringssl-review.googlesource.com/1694
Reviewed-by: Adam Langley <agl@google.com>
Configures the SSL stack to log session information to a BIO. The intent is to
support NSS's SSLKEYLOGFILE environment variable. Add support for the same
environment variable to tool/client.cc.
Tested against Wireshark 1.12.0.
BUG=393477
Change-Id: I4c231f9abebf194eb2df4aaeeafa337516774c95
Reviewed-on: https://boringssl-review.googlesource.com/1699
Reviewed-by: Adam Langley <agl@google.com>
Switch all of SRTP code to the standard return value convention with two
exceptions. Unfortunately, OpenSSL exposed API with the wrong error code. Keep
the public API flipped and document.
Change-Id: I43ac82513f4f52bb36a0b54aba9b9e0fa285730e
Reviewed-on: https://boringssl-review.googlesource.com/1691
Reviewed-by: Adam Langley <agl@google.com>
This isn't a header file that makes sense to export; any compilation unit which
includes it will gain a bunch of static arrays.
Change-Id: Ic698b74bdf758506a53d4eba19ab8b0f49a11ef7
Reviewed-on: https://boringssl-review.googlesource.com/1692
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for running the analysis.
Change-Id: I80810261e013423e746fd8d8afefb3581cffccc0
Reviewed-on: https://boringssl-review.googlesource.com/1701
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for noting that |host_name| could be used while
uninitialised in the resumption case.
While in the area, this change also renames |servername_done| to
something more reasonable and removes a documented value that was never
used. Additionally, the SNI ack was only sent when not resuming so
calculating whether it should be sent when processing ClientHello
extensions (which is after s->hit has been set) is superfluous.
Lastly, since SNI is only acked by servers, there's no need to worry
about the SNI callback returning NOACK in the client case.
Change-Id: Ie4ecfc347bd7afaf93b12526ff9311cc45da4df6
Reviewed-on: https://boringssl-review.googlesource.com/1700
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Reorder the tests in all_tests.sh to be in alphabetical order.
Change-Id: Idc6df6ab4a25709312a6f58635061bb643582c70
Reviewed-on: https://boringssl-review.googlesource.com/1680
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Useful for parsing things when you don't know what tag to expect (e.g. a
CHOICE). Also allow its operands to be NULL, so that it can be used to skip
arbitrary elements.
Delete CBS_ASN1_ANY which wasn't doing anything.
Change-Id: I56413e68b4f2e13860ea3e55373d5830713d7e5c
Reviewed-on: https://boringssl-review.googlesource.com/1661
Reviewed-by: Adam Langley <agl@google.com>
Don't pollute the embedder's namespace with a session_ctx macro. It looks like
the difference was that, without TLS extensions, session_ctx was ctx rather
than initial_ctx. Now it's always initial_ctx. Retain the semantics of
switching SSL_CTX's out after the fact, until/unless we decide to replace that
with something less scary-sounding.
Change-Id: Ie5df5138aec25218ca80031cf645671968b8a54a
Reviewed-on: https://boringssl-review.googlesource.com/1663
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
This moves CertificateVerify digest processing to the new
SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag. It also refactors it similarly to
ssl3_send_cert_verify and moves that logic to a common ssl3_cert_verify_hash
function to compute the handshake hash.
This removes a large chunk of duplicate (and divergent!) logic between TLS and
DTLS. It also removes TLS1_FLAGS_KEEP_HANDSHAKE.
Change-Id: Ia63c94f7d76d901bc9c4c33454fbfede411adf63
Reviewed-on: https://boringssl-review.googlesource.com/1633
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
wpa_supplicant needs this in order to get the order of the coordinate
field, apparently so that they can hash to a point.
Change-Id: I92d5df7b37b67ace5f497c25f53f16bbe134aced
Reviewed-on: https://boringssl-review.googlesource.com/1622
Reviewed-by: Adam Langley <agl@google.com>
This only applies to RC4, but it is still used by some Android code.
Change-Id: I4cf86269ffb7a230576da1bb2bfef7e1d4f234d6
Reviewed-on: https://boringssl-review.googlesource.com/1621
Reviewed-by: Adam Langley <agl@google.com>
Sadly this is needed by wpa_supplicant for NTLM hashes.
Change-Id: I1c362c676a11ee01f301ff6fbd33d0669396ea23
Reviewed-on: https://boringssl-review.googlesource.com/1620
Reviewed-by: Adam Langley <agl@google.com>
This fixes several of the problems with the old API.
- Padding was completely ignored.
- ='s in the middle of the input were accepted.
- It tries to be helpful and strips leading/trailing whitespace.
Change-Id: I99b9d5e6583f7eaf9bf0b6ee9ca39799811b58dc
Reviewed-on: https://boringssl-review.googlesource.com/1602
Reviewed-by: Adam Langley <agl@google.com>
This is cleaner than the OpenSSL code was, at least, but it's hardly
beautiful due to the "standard" that it's trying to implement. (See
[1].)
The references from the PKCS#8 code to various ciphers have digests have
been made into function pointer references rather than NIDs so that the
linker will be able to drop RC2 code for binaries that don't call PKCS#8
or #12 functions.
A bug that crashed OpenSSL/BoringSSL when parsing a malformed PKCS#8
structure has been fixed too.
See https://www.cs.auckland.ac.nz/~pgut001/pubs/pfx.html
Change-Id: Iaa1039e04ed7877b90792835e8ce3ebc3b29f89e
Reviewed-on: https://boringssl-review.googlesource.com/1592
Reviewed-by: Adam Langley <agl@google.com>
Previously, the ASN.1 functions in bytestring were capable of processing
indefinite length elements when the _ber functions were used. That works
well enough for PKCS#3, but NSS goes a bit crazy with BER encoding and
PKCS#12. Rather than complicate the core bytestring functions further,
the BER support is removed from them and moved to a separate function
that converts from BER to DER (if needed).
Change-Id: I2212b28e99bab9fab8c61f80d2012d3e5a3cc2f0
Reviewed-on: https://boringssl-review.googlesource.com/1591
Reviewed-by: Adam Langley <agl@google.com>
As useless as it might seem, the certificates in PKCS#12 files appear to
always be encrypted with 40-bit RC2. OpenSSL, NSS and Windows are all
the same on this point. Thus, in order to be able to import PKCS#12
files we need RC2 support.
RC2 has deliberately not been added to EVP_get_cipherbynid so that the
linker can drop the RC2 code unless the PKCS#12 functions are actually
called.
Change-Id: I5b2062fdf78cb622a8038c326da01aac8fb58962
Reviewed-on: https://boringssl-review.googlesource.com/1590
Reviewed-by: Adam Langley <agl@google.com>
Otherwise, in C, it becomes a K&R function declaration which doesn't actually
type-check the number of arguments.
Change-Id: I0731a9fefca46fb1c266bfb1c33d464cf451a22e
Reviewed-on: https://boringssl-review.googlesource.com/1582
Reviewed-by: Adam Langley <agl@google.com>
It doesn't appear to have ever been implemented on the client. The server code
stopped working anyway because it now skips the ssl_get_message call, so we
never cash in on the reuse_message, attempt to reprocess the repeated
ClientHello, and reject it thinking it's a second MS SGC restart.
Change-Id: Id536846e08460143f6fc0a550bdcc1b26b506b04
Reviewed-on: https://boringssl-review.googlesource.com/1580
Reviewed-by: Adam Langley <agl@google.com>
DSA is not connected up to EVP, so it wouldn't work anyway. We shouldn't
advertise a cipher suite we don't support. Chrome UMA data says virtually no
handshakes end up negotiating one of these.
Change-Id: I874d934432da6318f05782ebd149432c1d1e5275
Reviewed-on: https://boringssl-review.googlesource.com/1566
Reviewed-by: Adam Langley <agl@google.com>
These are the variants where the CA signs a Diffie-Hellman keypair. They are
not supported by Chrome on NSS.
Change-Id: I569a7ac58454bd3ed1cd5292d1f98499012cdf01
Reviewed-on: https://boringssl-review.googlesource.com/1564
Reviewed-by: Adam Langley <agl@google.com>
In the fixed_ecdh case, it wasn't even implemented, but there was stub code for
it. It complicates the ClientKeyExchange (the client parameters become implicit
in the certificate) and isn't used.
Change-Id: I3627a37042539c90e05e59cd0cb3cd6c56225561
Reviewed-on: https://boringssl-review.googlesource.com/1563
Reviewed-by: Adam Langley <agl@google.com>
This also removes the 'LOW' strength class.
Change-Id: Iffd2356dadb4a4875c1547a613d51061101358fd
Reviewed-on: https://boringssl-review.googlesource.com/1562
Reviewed-by: Adam Langley <agl@google.com>
NULL, SRP, CAMELLIA, export ciphers, SSLv2, IDEA, and SEED are gone. Unknown
directives are silently ignored in the parser, so there is no need to retain
their masks and entries in the cipher suite aliases.
Change-Id: If43b9cbce56b3e1c401db764b88996940452a300
Reviewed-on: https://boringssl-review.googlesource.com/1561
Reviewed-by: Adam Langley <agl@google.com>
This change exports SSL_cutthrough_complete and EVP_EncodedLength (which
were missed below) and also exports all ASN.1 "item" values because
Android needs that.
Change-Id: I6d10f935bb52ed6d682607a4016dd2b87758e3de
Reviewed-on: https://boringssl-review.googlesource.com/1557
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: If7752709727fe33ba38a9d414089253bb2f89ea2
Reviewed-on: https://boringssl-review.googlesource.com/1558
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change removes the old ASN.1 functions (ASN1_seq_unpack and
ASN1_seq_pack) which have always been disabled in BoringSSL.
It also removes code enabled by OPENSSL_EXPORT_VAR_AS_FUNCTION, which
we have never used.
Change-Id: I1fe323abf945a8a5828a04cc195c072e100a5095
Reviewed-on: https://boringssl-review.googlesource.com/1556
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change extracts two, common parts of RSA_decrypt and RSA_sign into
a function called |private_transform|. It also allows this to be
overridden in a method, which is convenient for opaque keys that only
expose the raw RSA transform as it means that the padding code from
BoringSSL can be easily reimplemented.
One significant change here is that short RSA ciphertexts will no longer
be accepted. I think this is correct and OpenSSL has a comment about PGP
mistakenly stripping leading zeros. However, these is the possibility
that it could break something.
Change-Id: I258c5cbbf21314cc9b6e8d2a2b898fd9a440cd40
Reviewed-on: https://boringssl-review.googlesource.com/1554
Reviewed-by: Adam Langley <agl@google.com>
This function was missed when the OPENSSL_EXPORT tags were first added.
Change-Id: Ia73555b8e7ca87f228a8ff9b281d7c401f1655a7
Reviewed-on: https://boringssl-review.googlesource.com/1553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Just use the normal API for them.
Change-Id: Ibb5988611a86e8d39abda1e02087523d98defb51
Reviewed-on: https://boringssl-review.googlesource.com/1555
Reviewed-by: Adam Langley <agl@google.com>
Rather than switching the order of the ServerHello and HelloVerifyRequest
states and processing each twice, have the states follow the protocol order.
HelloVerifyRequest reading is optional and ServerHello is strict. Use the
send_cookie bit to determine whether we're expecting a cookie or not.
Fix the dtls1_stop_timer call in these states to consistently hit the end of a
server flight; the previous flight should not be cleared from the retransmit
buffer until the entire next flight is received. That said, OpenSSL doesn't
appear to implement the part where, on receipt of the previous peer flight, the
buffered flight is retransmitted. (With the exception of a SSL3_MT_FINISHED
special-case in dtls1_read_bytes.) So if the peer is also OpenSSL, this doesn't
do anything.
Also fix the DTLS test which wasn't actually asserting that the ClientHello
matched.
Change-Id: Ia542190972dbffabb837d32c9d453a243caa90b2
Reviewed-on: https://boringssl-review.googlesource.com/1551
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
Those ciphers go through EVP_AEAD now.
Change-Id: Ia97af9960223724f041dc2c249def9e626fd03f8
Reviewed-on: https://boringssl-review.googlesource.com/1520
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
Android uses these for some conversions from Java formats. The code is
sufficiently bespoke that putting the conversion functions into
BoringSSL doesn't make a lot of sense, but the alternative is to expose
these ones.
Change-Id: If1362bc4a5c44cba4023c909e2ba6488ae019ddb
Several callers of EVP_EncodeBlock are doing ad-hoc versions of this
function without any overflow checks.
Change-Id: I4d0cad2347ea8c44b42465e8b14b2783db69ee8f
Reviewed-on: https://boringssl-review.googlesource.com/1511
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Android needs it. These functions were removed in the move to BoringSSL.
Change-Id: Ice24a0a1c390930cf07dbd00f72a3e12e6c241f9
Reviewed-on: https://boringssl-review.googlesource.com/1510
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is needed by Android because it passes this string to a handshake
callback. It's implemented in Android's OpenSSL in this patch:
https://android.googlesource.com/platform/external/openssl.git/+/master/patches/0003-jsse.patch
(Note that it's called |SSL_authentication_method| there.)
I didn't format this function in OpenSSL style because it's crazy and
because we'll probably clang-format ssl/ soon.
Change-Id: I865540511b50859c339da5d76ce37810449aa444
Android needs this and it was patched into their OpenSSL in
https://android.googlesource.com/platform/external/openssl.git/+/master/patches/0003-jsse.patch
It appears that this is needed because javax.net.ssl.SSLEngine has it as
part of its interface and thus it's part of the Android API. No idea why
anything would ever want to disable that though.
Change-Id: I9c6279a961637f44936889edbe269b9d5c19746d
ssl23_get_client_hello has lots of remnants of SSLv2 support and remnants of an
even older SSL_OP_NON_EXPORT_FIRST option (see upstream's
d92f0bb6e9ed94ac0c3aa0c939f2565f2ed95935) which complicates the logic.
Split it into three states and move V2ClientHello parsing into its own
function. Port it to CBS and CBB to give bounds checks on the V2ClientHello
parse.
This fixes a minor bug where, if the SSL_accept call in ssl23_get_client_hello
failed, cb would not be NULL'd and SSL_CB_ACCEPT_LOOP would get reported an
extra time.
It also unbreaks the invariant between s->packet, s->packet_length,
s->s3->rbuf.buf, and s->s3->rbuf.offset at the point the switch, although this
was of no consequence because the first ssl3_read_n call passes extend = 0
which resets s->packet and s->packet_length.
It also makes us tolerant to major version bumps in the ClientHello. Add tests
for TLS tolerance of both minor and major version bumps as well as the HTTP
request error codes.
Change-Id: I948337f4dc483f4ebe1742d3eba53b045b260257
Reviewed-on: https://boringssl-review.googlesource.com/1455
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I908d207ccd3d529ec09c687effc2aeb4631127d9
Reviewed-on: https://boringssl-review.googlesource.com/1470
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
It's not part of SSL_OP_ALL and is unused, so remove it. Add a test that
asserts the version check works.
Change-Id: I917516594ec5a4998a8316782f035697c33d99b0
Reviewed-on: https://boringssl-review.googlesource.com/1418
Reviewed-by: Adam Langley <agl@google.com>
This function serialises a PKCS#7 structure containing a number of
certificates.
Change-Id: Iaf15887e1060d5d201d5a3dd3dca8d51105ee6d6
Reviewed-on: https://boringssl-review.googlesource.com/1431
Reviewed-by: Adam Langley <agl@google.com>
Avoid needing to manually increment the reference count and using the right
lock, both here and in Chromium.
Change-Id: If116ebc224cfb1c4711f7e2c06f1fd2c97af21dd
Reviewed-on: https://boringssl-review.googlesource.com/1415
Reviewed-by: Adam Langley <agl@google.com>
A single va_list may not be used twice. Nothing calls BIO_vprintf and it just
(v)snprintfs into a buffer anyway, so remove it. If it's actually needed, we
can fiddle with va_copy and the lack of it in C89 later, but anything that
actually cares can just assemble the output externally.
Add a test in bio_test.c.
BUG=399546
Change-Id: Ia40a68b31cb5984d817e9c55351f49d9d6c964c1
Reviewed-on: https://boringssl-review.googlesource.com/1391
Reviewed-by: Adam Langley <agl@google.com>
The memory freelist maintained by OpenSSL claims to be a performance
optimization for platforms that have a slow malloc/free
implementation. This should not be the case on modern
linux/glibc. Remove the freelist as it poses a potential security
hazard of buffer-reuse that is of "initialized" memory that will not
be caught be tools such as valgrind.
Change-Id: I3cfa6a05f9bdfbbba7820060bae5a673dee43014
Reviewed-on: https://boringssl-review.googlesource.com/1385
Reviewed-by: Adam Langley <agl@google.com>
TODO indicated that it was unused, and commented. Any existing users are already broken.
Change-Id: I75ebaf3f20015845d8c81eecffe2a4dfbdbe18e8
Reviewed-on: https://boringssl-review.googlesource.com/1386
Reviewed-by: Adam Langley <agl@google.com>
I didn't mark these functions as OPENSSL_EXPORT in the first place
because I was hoping that they wouldn't be needed. However, WebRTC and
libjingle are using them.
Change-Id: I7a9de770a0a2213e99725b9b5ac7d3d13754ebfd
The original functions do an ascii_to_ucs2 transformation on the password.
Deprecate them in favor of making that encoding the caller's problem.
ascii_to_ucs2 doesn't handle, say, UTF-8 anyway. And with the original OpenSSL
function, some ciphers would do the transformation, and some wouldn't making
the text-string/bytes-string confusion even messier.
BUG=399121
Change-Id: I7d1cea20a260f21eec2e8ffb7cd6be239fe92873
Reviewed-on: https://boringssl-review.googlesource.com/1347
Reviewed-by: Adam Langley <agl@google.com>
Some phones have a buggy NEON unit and the Poly1305 NEON code fails on
them, even though other NEON code appears to work fine.
This change:
1) Fixes a bug where NEON was assumed even when the code wasn't compiled
in NEON mode.
2) Adds a second NEON control bit that can be disabled in order to run
NEON code, but not the Poly1305 NEON code.
https://code.google.com/p/chromium/issues/detail?id=341598
Change-Id: Icb121bf8dba47c7a46c7667f676ff7a4bc973625
Reviewed-on: https://boringssl-review.googlesource.com/1351
Reviewed-by: Adam Langley <agl@google.com>
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
Chromium is no longer using it.
Change-Id: If56340627d2024ff3fb8561405dd0cfc6f4787cb
Reviewed-on: https://boringssl-review.googlesource.com/1346
Reviewed-by: Adam Langley <agl@google.com>
Where possible, functions should return one for success and zero for
error. The use of additional negative values to indicate an error is,
itself, error prone.
This change fixes many EVP functions to remove the possibility of
negative return values. Existing code that is testing for <= 0 will
continue to function, although there is the possibility that some code
was differentiating between negative values (error) and zero (invalid
signature) for the verify functions and will now show the wrong error
message.
Change-Id: I982512596bb18a82df65861394dbd7487783bd3d
Reviewed-on: https://boringssl-review.googlesource.com/1333
Reviewed-by: Adam Langley <agl@google.com>
PR#3272
(Imported from upstream's 14183e50e75f54c44df6be69670180860ac19550 and
802fdcda1ebc4241a8e02af0046ba2f5264f71f6)
Change-Id: Ied6183d938e320f953a18f6616890d88b74def3f
OIDs with one component don't have an encoding.
PR#2556 (Bug#1)
(Imported from upstream's ff4cfc4c588c41d5e8d2d530231bc36cbc525add and
65e4dca40cb15f3acc878e26d734ec93bd367dca)
Change-Id: I55b54f23e891abc2c1e0b2976531fba1f16070bb
A lot of applications use ERR_TXT_STRING flag in order to determine
whether the error string is printable or not.
Change-Id: Ic79cdb55d43fdfac48da5de5e18c0c9c03c8f747
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-on: https://boringssl-review.googlesource.com/1192
Reviewed-by: Adam Langley <agl@google.com>
The <opensslfeatures.h> header provides #defines which are normally
declared by OpenSSL when features are disabled.
This way applications are able to detect which features were removed
from BoringSSL and use it as drop-in replacement for OpenSSL.
Inspired by LibreSSL, which provides similar header.
Change-Id: If4352743fd938267e2640fb09ca851464b9240b9
Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-on: https://boringssl-review.googlesource.com/1191
Reviewed-by: Adam Langley <agl@google.com>
Although the PKCS#1 padding check is internally constant-time, it is not
constant time at the crypto/ ssl/ API boundary. Expose a constant-time
RSA_message_index_PKCS1_type_2 function and integrate it into the
timing-sensitive portion of the RSA key exchange logic.
Change-Id: I6fa64ddc9d65564d05529d9b2985da7650d058c3
Reviewed-on: https://boringssl-review.googlesource.com/1301
Reviewed-by: Adam Langley <agl@google.com>
Now that the flag is set accurately, use it to enforce that the handshake and
CCS synchronization. If EXPECT_CCS is set, enforce that:
(a) No handshake records may be received before ChangeCipherSpec.
(b) There is no pending handshake data at the point EXPECT_CCS is set.
Change-Id: I04b228fe6a7a771cf6600b7d38aa762b2d553f08
Reviewed-on: https://boringssl-review.googlesource.com/1299
Reviewed-by: Adam Langley <agl@google.com>
Introduce a CR_CHANGE state just before entering CR_FINISHED_A. This replaces
the CCS_OK in the CR_FINISHED_A/CR_FINISHED_B case which otherwise would get
applied after partial reads of Finished. The other CCS_OK settings are
redundant with this one.
The copy in tls_secret_session_cb codepath is made unnecessary with
9eaeef81fa.
The copy in the normal session resumption case is unnecessary with
6444287806. Before that commit, OpenSSL would
potentially read Finished a state early. Now that we are strict (and get the
book-keeping correct) for expecting the NewSessionTicket message it too is
redundant.
Of particular note is the one after ssl3_send_finished. That was added in
response to upstream's PR#3400. I've reproduced the bug and concluded it was
actually a bug around expecting a NewSessionTicket message. That has been fixed
properly in 6444287806 by resetting
tlsext_expect_ticket on renegotiations.
Change-Id: I6a928386994fcd5efff26a5f0efb12b65bf7f299
Reviewed-on: https://boringssl-review.googlesource.com/1298
Reviewed-by: Adam Langley <agl@google.com>
Rename SSL3_ST_SR_POST_CLIENT_CERT to SSL3_ST_SR_CHANGE and have this be the
point at which CCS_OK is set. The copy before ssl3_get_finished is redundant as
we never transition to SR_FINISHED directly.
Change-Id: I3eefeb821e7ae53d52dacc587fdc59de9ea9a667
Reviewed-on: https://boringssl-review.googlesource.com/1297
Reviewed-by: Adam Langley <agl@google.com>
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG and
SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG. Neither of them have code that's even
enabled.
Change-Id: I866aabe1aa37e8ee145aaeaecaff6704c3ad21bc
Reviewed-on: https://boringssl-review.googlesource.com/1284
Reviewed-by: Adam Langley <agl@google.com>
Also fix a place where fixes for the condition for sending ServerKeyExchange in
s3_srvr.c were never propogated to d1_srvr.c. Tidy up that logic to use
ssl_cipher_requires_server_key_exchange and simplify the PSK check.
Change-Id: Ie36d378f733e59a8df405bc869f2346af59bd574
Reviewed-on: https://boringssl-review.googlesource.com/1283
Reviewed-by: Adam Langley <agl@google.com>
This removes support code for a "stream_mac" mode only used by GOST. Also get
rid of this
/* I should fix this up TLS TLS TLS TLS TLS XXXXXXXX */
comment next to it. It's not actually related to GOST (dates to OpenSSL initial
commit), but isn't especially helpful at this point.
Change-Id: Ib13c6e27e16e0d1fb59ed0142ddf913b9abc20b7
Reviewed-on: https://boringssl-review.googlesource.com/1281
Reviewed-by: Adam Langley <agl@google.com>
