We reset it to SSL_NOTHING at the start of ever SSL_get_error-using operation.
Then we only set it to a non-NOTHING value in the rest of the stack on error
paths.
Currently, ssl->rwstate is set all over the place. Sometimes the pattern is:
ssl->rwstate = SSL_WRITING;
if (BIO_write(...) <= 0) {
goto err;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we only set it to the non-NOTHING value on error.
if (BIO_write(...) <= 0) {
ssl->rwstate = SSL_WRITING;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we just set it to SSL_NOTHING far from any callback in random places.
The third case is arbitrary and clearly should be removed.
But, in the second case, we sometimes forget to undo it afterwards. This is
largely harmless since an error in the error queue overrides rwstate, but we
don't always put something in the error queue (falling back to
SSL_ERROR_SYSCALL for "I'm not sure why it failed. Perhaps it was one of your
callbacks? Check your errno equivalent."), but in that case a stray rwstate
value will cause it to be wrong.
We could fix the cases where we fail to set SSL_NOTHING on success cases, but
this doesn't account for there being multiple SSL_get_error operations. The
consumer may have an SSL_read and an SSL_write running concurrently. Instead,
it seems the best option is to lift the SSL_NOTHING reset to the operations and
set SSL_WRITING and friends as in the second case.
(Someday hopefully we can fix this to just be an enum that is internally
returned. It can convert to something stateful at the API layer.)
Change-Id: I54665ec066a64eb0e48a06e2fcd0d2681a42df7f
Reviewed-on: https://boringssl-review.googlesource.com/7453
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL historically made some poor API decisions. Rather than returning a
status enum in SSL_read, etc., these functions must be paired with
SSL_get_error which determines the cause of the last error's failure. This
requires SSL_read communicate with SSL_get_error with some stateful flag,
rwstate.
Further, probably as workarounds for bugs elsewhere, SSL_get_error does not
trust rwstate. Among other quirks, if the error queue is non-empty,
SSL_get_error overrides rwstate and returns a value based on that. This
requires that SSL_read, etc., be called with an empty error queue. (Or we hit
one of the spurious ERR_clear_error calls in the handshake state machine,
likely added as further self-workarounds.)
Since requiring callers consistently clear the error queue everywhere is
unreasonable (crbug.com/567501), clear ERR_clear_error *once* at the entry
point. Until/unless[*] we make SSL_get_error sane, this is the most reasonable
way to get to the point that clearing the error queue on error is optional.
With those in place, the calls in the handshake state machine are no longer
needed. (I suspect all the ERR_clear_system_error calls can also go, but I'll
investigate and think about that separately.)
[*] I'm not even sure it's possible anymore, thanks to the possibility of
BIO_write pushing to the error queue.
BUG=567501,593963
Change-Id: I564ace199e5a4a74b2554ad3335e99cd17120741
Reviewed-on: https://boringssl-review.googlesource.com/7455
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Move it into ssl->s3 so it automatically behaves correctly on SSL_clear.
ssl->version is still a mess though.
Change-Id: I17a692a04a845886ec4f8de229fa6cf99fa7e24a
Reviewed-on: https://boringssl-review.googlesource.com/6844
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
They run through completely different logic as only handshake is fragmented.
This'll make it easier to rewrite the handshake logic in a follow-up.
Change-Id: I9515feafc06bf069b261073873966e72fcbe13cb
Reviewed-on: https://boringssl-review.googlesource.com/6420
Reviewed-by: Adam Langley <agl@google.com>
ssl.h should be first. Also two lines after includes and the rest of the
file.
Change-Id: Icb7586e00a3e64170082c96cf3f8bfbb2b7e1611
Reviewed-on: https://boringssl-review.googlesource.com/5892
Reviewed-by: Adam Langley <agl@google.com>
The handshake hash is initialized from the buffer as soon as the cipher
is known. When adding a message to the transcript, independently update
the buffer and rolling hash, whichever is active. This avoids the
complications around dont_free_handshake_buffer and EMS.
BUG=492371
Change-Id: I3b1065796a50fd1be5d42ead7210c2f253ef0aca
Reviewed-on: https://boringssl-review.googlesource.com/5615
Reviewed-by: Adam Langley <agl@google.com>
With SSL2 gone, there's no need for this split between the abstract
cipher framework and ciphers. Put the cipher suite table in ssl_cipher.c
and move other SSL_CIPHER logic there. With that gone, prune the
cipher-related hooks in SSL_PROTOCOL_METHOD.
BUG=468889
Change-Id: I48579de8bc4c0ea52781ba1b7b57bc5b4919d21c
Reviewed-on: https://boringssl-review.googlesource.com/4961
Reviewed-by: Adam Langley <agl@google.com>
This is considerably less scary than swapping out connection state. It also
fixes a minor bug where, if dtls1_do_write had an alert to dispatch and we
happened to retry during a rexmit, it would use the wrong epoch.
BUG=468889
Change-Id: I754b0d46bfd02f797f4c3f7cfde28d3e5f30c52b
Reviewed-on: https://boringssl-review.googlesource.com/4793
Reviewed-by: Adam Langley <agl@google.com>
With DTLSv1_get_timeout de-ctrl-ified, the type checker complains about
OPENSSL_timeval. Existing callers all use the real timeval.
Now that OPENSSL_timeval is not included in any public structs, simply
forward-declare timeval itself in ssl.h and pull in winsock2.h in internal
headers.
Change-Id: Ieaf110e141578488048c28cdadb14881301a2ce1
Reviewed-on: https://boringssl-review.googlesource.com/4682
Reviewed-by: Adam Langley <agl@google.com>
Rather than shoehorn real ciphers and cipher aliases into the same type (that's
what cipher->valid is used for), treat them separately. Make
ssl_cipher_apply_rule match ciphers by cipher_id (the parameter was ignored and
we assumed that masks uniquely identify a cipher) and remove the special cases
around zero for all the masks. This requires us to remember which fields
default to 0 and which default to ~0u, but the logic is much clearer.
Finally, now that ciphers and cipher aliases are different, don't process rules
which sum together an actual cipher with cipher aliases. This would AND
together the masks for the alias with the values in the cipher and do something
weird around alg_ssl. (alg_ssl is just weird in general, as everyone trying to
disable SSLv3 in OpenSSL recently discovered.)
With all that, we can finally remove cipher->valid which was always one.
Change-Id: Iefcfe159bd6c22dbaea3a5f1517bd82f756dcfe1
Reviewed-on: https://boringssl-review.googlesource.com/4284
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
This conceivably has a use, but NSS doesn't do this buffer either and it still
suffers from the same problems as the other uses of record_pqueue. This removes
the last use of record_pqueue. It also opens the door to removing pqueue
altogether as it isn't the right data structure for either of the remaining
uses either. (It's not clear it was right for record_pqueue either, but I don't
feel like digging into this code.)
Change-Id: If8a43e7332b3cd11a78a516f3e8ebf828052316f
Reviewed-on: https://boringssl-review.googlesource.com/4239
Reviewed-by: Adam Langley <agl@google.com>
It was only ever enabled for handshake and alert messages. The comments cite
renego as a use case though even then I'm not clear on why. The only use I see
is if, say, the Finished message and ClientKeyExchange came in out-of-order.
DTLS is unreliable so leaning on retransmit seems fine, and usually flights
will be packed into one packet where possible. NSS doesn't have any such
buffer and doesn't seem to have problems.
The buffering mechanism is also rather dubious. It stows away the entire packet
and read buffer---all 16K of it---and there may have been other records in that
packet.
Change-Id: Ic3b7bf817be380dc73102eec62c690ed093e6667
Reviewed-on: https://boringssl-review.googlesource.com/4238
Reviewed-by: Adam Langley <agl@google.com>
This too isn't version-specific. This removes the final difference between TLS
and DTLS SSL3_ENC_METHODs and we can fold them together. (We should be able to
fold away the version-specific differences too, but all in due time.)
Change-Id: I6652d3942a0970273d46d28d7052629c81f848b5
Reviewed-on: https://boringssl-review.googlesource.com/3771
Reviewed-by: Adam Langley <agl@google.com>
None of these are version-specific. SSL_PROTOCOL_METHOD's interface will change
later, but this gets us closer to folding away SSL3_ENC_METHOD.
Change-Id: Ib427cdff32d0701a18fe42a52cdbf798f82ba956
Reviewed-on: https://boringssl-review.googlesource.com/3769
Reviewed-by: Adam Langley <agl@google.com>
It may fail because the BIO_write to the memory BIO can allocate.
Unfortunately, this bubbles up pretty far up now that we've moved the handshake
hash to ssl3_set_handshake_header.
Change-Id: I58884347a4456bb974ac4783078131522167e29d
Reviewed-on: https://boringssl-review.googlesource.com/3483
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
BIO_ctrls do not have terribly well-defined return values on error. (Though the
existing ones seem to all return 0, not -1, on nonexistant operation.)
Change-Id: I08497f023ce3257c253aa71517a98b2fe73c3f74
Reviewed-on: https://boringssl-review.googlesource.com/2829
Reviewed-by: Adam Langley <agl@google.com>
That setting means that the MTU is provided externally via SSL_set_mtu.
(Imported from upstream's 001235778a)
Change-Id: I4e5743a9dee734ddd0235f080aefe98a7365aaf6
Reviewed-on: https://boringssl-review.googlesource.com/2826
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
This should have been removed with its dtls1_clear cousin in
8c88153465.
Change-Id: Ibf4ee67348f603285b26766568cbb92183b62cee
Reviewed-on: https://boringssl-review.googlesource.com/2823
Reviewed-by: Adam Langley <agl@google.com>
State on s3 gets freed in both ssl3_clear and ssl3_free. Considate to just
ssl3_free. This replaces the (SSL,ssl,ssl3)_clear calls in (SSL,ssl,ssl3)_new
with the state that was initialized. This results in a little code duplication
between SSL_new and SSL_clear because state is on the wrong object. I've just
left TODOs for now; some of it will need disentangling.
We're far from it, but going forward, separate state between s and s->s3 as:
- s contains configuration state, DTLS or TLS. It is initialized from SSL_CTX,
configurable directly afterwards, and preserved across SSL_clear calls.
(Including when it's implicitly set as part of a handshake callback.)
- Connection state hangs off s->s3 (TLS) and s->d1 (DTLS). It is reset across
SSL_clear. This should happen naturally out of a ssl_free/ssl_new pair.
The goal is to avoid needing separate initialize and reset code for anything;
the point any particular state is reset is the point its owning context is
destroyed and recreated.
Change-Id: I5d779010778109f8c339c07433a0777feaf94d1f
Reviewed-on: https://boringssl-review.googlesource.com/2822
Reviewed-by: Adam Langley <agl@google.com>
This avoids needing a should_add_to_finished_hash boolean on do_write. The
logic in do_write was a little awkward because do_write would be called
multiple times if the write took several iterations. This also gets complex if
DTLS retransmits are involved. (At a glance, it's not obvious the
BIO_CTRL_DGRAM_MTU_EXCEEDED case actually works.)
Doing it as the handshake message is being prepared avoids this concern. It
also gives a natural point for the extended master secret logic which needs to
do work after the finished hash has been sampled.
As a bonus, we can remove s->d1->retransmitting which was only used to deal
with this issue.
Change-Id: Ifedf23ee4a6c5e08f960d296a6eb1f337a16dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2604
Reviewed-by: Adam Langley <agl@google.com>
The frag_off/frag_len parameters are always zero, and the return value is never
used.
Change-Id: If7487b23c55f2a996e411b25b76a8e1651f25d8b
Reviewed-on: https://boringssl-review.googlesource.com/2601
Reviewed-by: Adam Langley <agl@google.com>
This change has no semantic effect (I hope!). It's just a reformatting
of a few files in ssl/. This is just a start – the other files in ssl/
should follow in the coming days.
Change-Id: I5eb3f4b18d0d46349d0f94d3fe5ab2003db5364e
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
SSL_clear sets s->state and dtls1_clear sets cookie_len on the server. Setting
cookie_len on the server seems to serve no purpose but to let the callback know
how large the buffer is. This can be done just before calling the callback.
It also avoids a bug where the cookie check can be bypassed, should the server
not specify an app_verify_cookie_cb, by supplying a cookie of all zeros of the
maximum size. (Zero is fine because an empty cookie is rejected.)
The goal here is to avoid needing the SSL_clear calls in the handshake
functions. They are currently needed to fix the cookie_len setting when using
the generic method. (They get set wrong and then flipped back.)
Change-Id: I5095891bc0f7df62d83a9c84312fcf0b84826faa
Reviewed-on: https://boringssl-review.googlesource.com/2435
Reviewed-by: Adam Langley <agl@google.com>
This fixes bugs that kept the tests from working:
- Resolve DTLS version and cookie before the session.
- In DTLS_ANY_VERSION, ServerHello should be read with first_packet = 1. This
is a regression from f2fedefdca. We'll want to
do the same for TLS, but first let's change this to a boolean has_version in a
follow-up.
Things not yet fixed:
- DTLS code is not EVP_AEAD-aware. Those ciphers are disabled for now.
- On the client, DTLS_ANY_VERSION creates SSL_SESSIONs with the wrong
ssl_version. The tests pass because we no longer enforce the match as of
e37216f560. (In fact, we've gone from the server
ignoring ssl_version and client enforcing to the client mostly ignoring
ssl_version and the server enforcing.)
- ssl3_send_client_hello's ssl_version check checks for equality against
s->version rather than >.
Change-Id: I5a0dde221b2009413df9b9443882b9bf3b29519c
Reviewed-on: https://boringssl-review.googlesource.com/2403
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
David Benjamin
David Benjamin
Matt Braithwaite
Adam Langley
Adam Langley
Loganaden Velvindron