https://boringssl-review.googlesource.com/c/34188 accidentally disabled
it (__ARM_MAX_ARCH__ wasn't defined), which, in turn, masked a bug in
https://boringssl-review.googlesource.com/c/34874.
Remove the __ARM_MAX_ARCH__ check as that's hardcoded to 8 anyway. Then
revert the problematic part of the bsaes-armv7.pl change. That brings
back the somewhat questionable post-dispatch to pre-dispatch call, but I
hope to patch the fallbacks out soon anyway.
Change-Id: I567e55fe35cb716d5ed56580113a302617f5ad71
Reviewed-on: https://boringssl-review.googlesource.com/c/35044
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
The ImplDispatchTest was broken because the 64-bit VPAES code wasn't
setting the hit flags.
Change-Id: I30200db64337deba7ae9d70d8427decbdfceca58
Reviewed-on: https://boringssl-review.googlesource.com/c/34986
Reviewed-by: David Benjamin <davidben@google.com>
In particular, consistently pair bsaes with aes_nohw.
Ideally the aes_nohw_* calls in bsaes-*.pl would be patched out and
bsaes grows its own constant-time key setup
(https://crbug.com/boringssl/256), but I'll sort that out separately. In
the meantime, avoid going through AES_* which now dispatch. This avoids
several nuisances:
1. If we were to add, say, a vpaes-armv7.pl the ABI tests would break.
Fundamentally, we cannot assume that an AES_KEY has one and only one
representation and must keep everything matching up.
2. AES_* functions should enable vpaes. This makes AES_* faster and
constant-time for vector-capable CPUs
(https://crbug.com/boringssl/263), relevant for QUIC packet number
encryption, allowing us to add vpaes-armv8.pl
(https://crbug.com/boringssl/246) without carrying a (likely) mostly
unused AES implementation.
3. It's silly to double-dispatch when the EVP layer has already
dispatched.
4. We should avoid asm calling into C. Otherwise, we need to test asm
for ABI compliance as both caller and callee. Currently we only test
it for callee compliance. When asm calls into asm, it *should* comply
with the ABI as caller too, but mistakes don't matter as long as the
called function triggers it. If the function is asm, this is fixed.
If it is C, we must care about arbitrary C compiler output.
Bug: 263
Change-Id: Ic85af5c765fd57cbffeaf301c3872bad6c5bbf78
Reviewed-on: https://boringssl-review.googlesource.com/c/34874
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This shrinks the bssl binary by about 8k.
Change-Id: I571f258ccf7032ae34db3f20904ad9cc81cca839
Reviewed-on: https://boringssl-review.googlesource.com/c/34866
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
The first attempt involved using Linux's support for hardware
breakpoints to detect when assembly code was run. However, this doesn't
work with SDE, which is a problem.
This version has the assembly code update a global flags variable when
it's run, but only in non-FIPS and non-debug builds.
Update-Note: Assembly files now pay attention to the NDEBUG preprocessor
symbol. Ensure the build passes the symbol in. (If release builds fail
to link due to missing BORINGSSL_function_hit, this is the cause.)
Change-Id: I6b7ced442b7a77d0b4ae148b00c351f68af89a6e
Reviewed-on: https://boringssl-review.googlesource.com/c/33384
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This involves fixing some bugs in aes_nohw_cbc_encrypt's annotations,
and working around a libunwind bug. In doing so, support .cfi_remember_state
and .cfi_restore_state in perlasm.
Change-Id: Iaedfe691356b0468327a6be0958d034dafa760e5
Reviewed-on: https://boringssl-review.googlesource.com/c/34189
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
We don't call it, so ship less code and reduce the number of places
where we must think about the bsaes -> aes_nohw fallback.
Bug: 256
Change-Id: I10ac2d70e18ec81e679631a9532c36d9edab1c6e
Reviewed-on: https://boringssl-review.googlesource.com/c/33586
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Put data in .rodata and, rather than adr, use the combination of adrp :pg_hi21:
and add :lo12:. Unfortunately, iOS uses different syntax, so we must add more
transforms to arm-xlate.pl.
Tested manually by:
1. Use Android NDK r19-beta1
2. Follow usual instructions to configure CMake for aarch64, but pass
-DCMAKE_EXE_LINKER_FLAGS="-fuse-ld=lld -Wl,-execute-only".
3. Build. Confirm with readelf -l tool/bssl that .text is not marked
readable.
4. Push the test binaries onto a Pixel 3. Test normally and with
--cpu={none,neon,crypto}. I had to pass --gtest_filter=-*Thread* to
crypto_test. There appears to be an issue with some runtime function
that's unrelated to our assembly.
No measurable performance difference.
Going forward, to support this, we will need to apply similar changes to
all other AArch64 assembly. This is relatively straightforward, but may
be a little finicky for dual-AArch32/AArch64 files (aesv8-armx.pl).
Update-Note: Assembly syntax is a mess. There's a decent chance some
assembler will get offend.
Change-Id: Ib59b921d4cce76584320fefd23e6bb7ebd4847eb
Reviewed-on: https://boringssl-review.googlesource.com/c/33245
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Rather than have plain-C functions, asm functions, and accelerated
functions, just have accelerated and non-accelerated, where the latter
are either provided by assembly or by C code.
Pertinently, this allows Aarch64 to use hardware accel for the basic
|AES_*| functions.
Change-Id: I0003c0c7a43d85a3eee8c8f37697f61a3070dd40
Reviewed-on: https://boringssl-review.googlesource.com/28385
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This was reverted a second time because it ended up always setting the
final argument to CRYPTO_gcm128_init to zero, which disabled some
acceleration of GCM on ≥Haswell. With this update, that argument will be
set to 1 if |aes_hw_*| functions are being used.
Probably this will need to be reverted too for some reason. I'm hoping
to fill the entire git short description with “Revert”.
Change-Id: Ib4a06f937d35d95affdc0b63f29f01c4a8c47d03
Reviewed-on: https://boringssl-review.googlesource.com/28484
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Broke Aarch64 on the main builders (but not the trybots, somehow.)
Change-Id: I53eb09c99ef42a59628b0506b5ddb125299b554a
Reviewed-on: https://boringssl-review.googlesource.com/28364
Reviewed-by: Adam Langley <agl@google.com>
This also happens to make the AES_[en|de]crypt functions use AES-NI
(where available) on Intel.
Update-Note: this substantially changes how AES-NI is triggered. Worth running bssl speed (on both k8 and ppc), before and after, to confirm that there are no regressions.
Change-Id: I5f22c1975236bbc1633c24ab60d683bca8ddd4c3
Reviewed-on: https://boringssl-review.googlesource.com/28026
Reviewed-by: David Benjamin <davidben@google.com>
Thumb2 addresses are a bit a mess, depending on whether a label is
interpreted as a function pointer value (for use with BX and BLX) or as
a program counter value (for use with PC-relative addressing). Clang's
integrated assembler mis-assembles this code. See
https://crbug.com/124610#c54 for details.
Instead, use the ADR pseudo-instruction which has clear semantics and
should be supported by every assembler that handles the OpenSSL Thumb2
code. (In other files, the ADR vs SUB conditionals are based on
__thumb2__ already. For some reason, this one is based on __APPLE__, I'm
guessing to deal with an older version of clang assembler.)
It's unclear to me which of clang or binutils is "correct" or if this is
even a well-defined notion beyond "whatever binutils does". But I will
note that https://github.com/openssl/openssl/pull/4669 suggests binutils
has also changed behavior around this before.
See also https://github.com/openssl/openssl/pull/5431 in OpenSSL.
Bug: chromium:124610
Change-Id: I5e7a0c8c0f54a3f65cc324ad599a41883675f368
Reviewed-on: https://boringssl-review.googlesource.com/26164
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This syncs up with OpenSSL master as of
50ea9d2b3521467a11559be41dcf05ee05feabd6. The non-license non-spelling
changes are CFI bits, which were added in upstream in
b84460ad3a3e4fcb22efaa0a8365b826f4264ecf.
Change-Id: I42280985f834d5b9133eacafc8ff9dbd2f0ea59a
Reviewed-on: https://boringssl-review.googlesource.com/25704
Reviewed-by: Adam Langley <agl@google.com>
These files are otherwise up-to-date with OpenSSL master as of
50ea9d2b3521467a11559be41dcf05ee05feabd6, modulo a couple of spelling
fixes which I've imported.
I've also reverted the same-line label and instruction patch to
x86_64-mont*.pl. The new delocate parser handles that fine.
Change-Id: Ife35c671a8104c3cc2fb6c5a03127376fccc4402
Reviewed-on: https://boringssl-review.googlesource.com/25644
Reviewed-by: Adam Langley <agl@google.com>
ARMv8 kindly deprecated most of its IT instructions in Thumb mode.
These files are taken from upstream and are used on both ARMv7 and ARMv8
processors. Accordingly, silence the warnings by marking the file as
targetting ARMv7. In other files, they were accidentally silenced anyway
by way of the existing .arch lines.
This can be reproduced by building with the new NDK and passing
-DCMAKE_ASM_FLAGS=-march=armv8-a. Some of our downstream code ends up
passing that to the assembly.
Note this change does not attempt to arrange for ARMv8-A/T32 to get
code which honors the constraints. It only silences the warnings and
continues to give it the same ARMv7-A/Thumb-2 code that backwards
compatibility dictates it continue to run.
Bug: chromium:575886, b/63131949
Change-Id: I24ce0b695942eaac799347922b243353b43ad7df
Reviewed-on: https://boringssl-review.googlesource.com/24166
Reviewed-by: Adam Langley <agl@google.com>
This makes it difficult to build against the NDK's toolchain file. The
problem is __clang__ just means Clang is the frontend and implies
nothing about which assembler. When using as, it is fine. When using
clang-as on Linux, one needs a clang-as from this year.
The only places where we case about clang's integrated assembler are iOS
(where perlasm strips out .arch anyway) and build environments like
Chromium which have a regularly-updated clang. Thus we can remove this
now.
Bug: 39
Update-Note: Holler if this breaks the build. If it doesn't break the
build, you can probably remove any BORINGSSL_CLANG_SUPPORTS_DOT_ARCH
or explicit -march armv8-a+crypto lines in your BoringSSL build.
Change-Id: I21ce54b14c659830520c2f1d51c7bd13e0980c68
Reviewed-on: https://boringssl-review.googlesource.com/24124
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's not clear if it's a feature or bug, but binutils-2.29[.1]
interprets 'adr' instruction with Thumb2 code reference differently,
in a way that affects calculation of addresses of constants' tables.
(Imported from upstream's b82acc3c1a7f304c9df31841753a0fa76b5b3cda.)
Change-Id: Ia0f5233a9fcfaf18b9d1164bf1c88217c0cbb60d
Reviewed-on: https://boringssl-review.googlesource.com/22724
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The changes to the assembly files are synced from upstream's
64d92d74985ebb3d0be58a9718f9e080a14a8e7f. cpu-intel.c is translated to C
from that commit and d84df594404ebbd71d21fec5526178d935e4d88d.
Change-Id: I02c8f83aa4780df301c21f011ef2d8d8300e2f2a
Reviewed-on: https://boringssl-review.googlesource.com/18411
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Three modules were left behind in
I59df0b567e8e80befe5c399f817d6410ddafc577.
(Imported from upstream's c93f06c12f10c07cea935abd78a07a037e27f155.)
This actually meant functions defined in those two files were
non-functional. I'm guessing no one noticed upstream because, if you go
strictly by iOS compile-time capabilities, all this code is unreachable
on ios32, only ios64.
Change-Id: I55035edf2aebf96d14bdf66161afa2374643d4ec
Reviewed-on: https://boringssl-review.googlesource.com/17113
Reviewed-by: David Benjamin <davidben@google.com>
This change was made by copying over the files as of that commit and
then discarding the parts of the diff which corresponding to our own
changes.
Change-Id: I28c5d711f7a8cec30749b8174687434129af5209
Reviewed-on: https://boringssl-review.googlesource.com/17111
Reviewed-by: Adam Langley <agl@google.com>
As some of ARM processors, more specifically Cortex-Mx series, are
Thumb2-only, we need to support Thumb2-only builds even in assembly.
(Imported from upstream's 11208dcfb9105e8afa37233185decefd45e89e17.)
Change-Id: I7cb48ce6a842cf3cfdf553f6e6e6227d52d525c0
Reviewed-on: https://boringssl-review.googlesource.com/17108
Reviewed-by: Adam Langley <agl@google.com>
We patch arm-xlate.pl to add the ifdefs, so this isn't needed and
reduces our upstream diff.
(We do still have a diff from upstream here. Will go through them
shortly.)
Change-Id: I5b1e301b9111969815f58d69a98591c973465f42
Reviewed-on: https://boringssl-review.googlesource.com/17105
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The symbol “rcon” should be local in order to avoid collisions and it's
much easier on delocate if some of the expressions are evalulated in
Perl rather than left in the resulting .S file.
Also fix the perlasm style so the symbols are actually local.
Change-Id: Iddfc661fc3a6504bcc5732abaa1174da89ad805e
Reviewed-on: https://boringssl-review.googlesource.com/16524
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
43e5a26b53 removed the .file directive
from x86asm.pl. This removes the parameter from asm_init altogether. See
also upstream's e195c8a2562baef0fdcae330556ed60b1e922b0e.
Change-Id: I65761bc962d09f9210661a38ecf6df23eae8743d
Reviewed-on: https://boringssl-review.googlesource.com/16247
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
OPENSSL_ia32cap_addr avoids any relocations within the module, at the
cost of a runtime TEXTREL, which causes problems in some cases.
(Notably, if someone links us into a binary which uses the GCC "ifunc"
attribute, the loader crashes.)
We add a OPENSSL_ia32cap_addr_delta symbol (which is reachable
relocation-free from the module) stores the difference between
OPENSSL_ia32cap_P and its own address. Next, reference
OPENSSL_ia32cap_P in code as usual, but always doing LEAQ (or the
equivalent GOTPCREL MOVQ) into a register first. This pattern we can
then transform into a LEAQ and ADDQ on OPENSSL_ia32cap_addr_delta.
ADDQ modifies the FLAGS register, so this is only a safe transformation
if we safe and restore flags first. That, in turn, is only a safe
transformation if code always uses %rsp as a stack pointer (specifically
everything below the stack must be fair game for scribbling over). Linux
delivers signals on %rsp, so this should already be an ABI requirement.
Further, we must clear the red zone (using LEAQ to avoid touching FLAGS)
which signal handlers may not scribble over.
This also fixes the GOTTPOFF logic to clear the red zone.
Change-Id: I4ca6133ab936d5a13d5c8ef265a12ab6bd0073c9
Reviewed-on: https://boringssl-review.googlesource.com/15545
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
