If SSL_clear is called before SSL_set_{connect,accept}_state (as SSL_new does
internally), s->state will get set prematurely. Likewise, s->server is set
based on the method's ssl_accept hook, but client SSL's may be initialized from
a generic SSL_METHOD too.
Since we can't easily get rid of the generic SSL_METHODs, defer s->state and
s->server initialization until the side is known.
Change-Id: I0972e17083df22a3c09f6f087011b54c699a22e7
Reviewed-on: https://boringssl-review.googlesource.com/2439
Reviewed-by: Adam Langley <agl@google.com>
It's unused. Also per the previous commit message, it historically had a bug
anyway.
Change-Id: I5868641e7938ddebbc0ffd72d218c81cd17c7739
Reviewed-on: https://boringssl-review.googlesource.com/2437
Reviewed-by: Adam Langley <agl@google.com>
It should already be assigned, as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73. I believe these assignments are part
of the reason it used to appear to work. Replace them with assertions. So the
assertions are actually valid, check in SSL_connect / SSL_accept that they are
never called if the socket had been placed in the opposite state. (Or we'd be
in another place where it would have appeared to work with the handshake
functions fixing things afterwards.)
Now the only places handshake_func is set are in SSL_set_{connect,accept}_state
and the method switches.
Change-Id: Ib249212bf4aa889b94c35965a62ca06bdbcf52e1
Reviewed-on: https://boringssl-review.googlesource.com/2432
Reviewed-by: Adam Langley <agl@google.com>
We intend to deprecate the version-locked methods and unify them. Don't expose
that there's a method swap. (The existing version-locked methods will merely be
a shorthand for configuring minimum/maximum versions.)
There is one consumer of SSL_get_ssl_method in internal code, but it's just
some logging in test-only code. All it's doing is getting the version as a
string which should be SSL_get_version instead.
While here, also remove dead ssl_bad_method function. Also the bogus
ssl_crock_st forward-declaration. The forward declaration in base.h should be
perfectly sufficient.
Change-Id: I50480808f51022e05b078a285f58ec85d5ad7c8e
Reviewed-on: https://boringssl-review.googlesource.com/2408
Reviewed-by: Adam Langley <agl@google.com>
b9cc33a4d6 deleted its documentation rather than
SSL_OP_EPHEMERAL_RSA's.
Change-Id: I2e099a2dc498f145c5a3ccaac824edbda27f7e89
Reviewed-on: https://boringssl-review.googlesource.com/2407
Reviewed-by: Adam Langley <agl@google.com>
They're mapped to the same value, which is the only reason the tests work right
now.
Change-Id: I22f6e3a6b3a2c88b0f92b6d261e86111b4172cd6
Reviewed-on: https://boringssl-review.googlesource.com/2406
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
The data is owned by the SSL_SESSION, so the caller should not modify it. This
will require changes in Chromium, but they should be trivial.
Change-Id: I314718530c7d810f7c7b8852339b782b4c2dace1
Reviewed-on: https://boringssl-review.googlesource.com/2409
Reviewed-by: Adam Langley <agl@google.com>
Don't use |BIO_set_foo_buffer_size| when setting the
sizes of the buffers while making buffer pair. Since it
happens in pair.c we know the BIOs are BIO pairs and using
bio_ctrl here complicates setting external buffers. Also
zero out bio_bio_st during construction.
This fixes a problem that would happen if the default buffer
sizes were not set, since buf_externally_allocated was
not yet initialized.
Remove BIO_C_SET_BUFF_SIZE and BIO_CTRL_RESET which are
not used for bio pairs.
Change-Id: I365091d5f44f6f1c5522c325a771bdf03d8fe950
Reviewed-on: https://boringssl-review.googlesource.com/2370
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
This is intended for TLS client auth with Windows CAPI- and CNG-backed keys
which implement sign over sign_raw and do not support all hash functions. Only
plumbed through RSA for now.
Change-Id: Ica42e7fb026840f817a169da9372dda226f7d6fd
Reviewed-on: https://boringssl-review.googlesource.com/2250
Reviewed-by: Adam Langley <agl@google.com>
Also add functionality for setting external buffers to give the
caller better control of the buffers. This is typical needed if OS
sockets can outlive the bio pair.
Change-Id: I500f0c522011ce76e9a9bce5d7b43c93d9d11457
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This is an experimental flag that dates back to SSLeay 0.8.1b or earlier. It's
never set internally and never set in consumers.
Change-Id: I922583635c9f3d8d93f08f1707531ad22a26ae6a
Reviewed-on: https://boringssl-review.googlesource.com/2214
Reviewed-by: Adam Langley <agl@google.com>
r and s are scalars, not EC coordinates.
Change-Id: I46a20215d3c602559c18c74a1da9a91543ea73ca
Reviewed-on: https://boringssl-review.googlesource.com/2240
Reviewed-by: Adam Langley <agl@google.com>
Parameters like these should not change between 32-bit and 64-bit. 64 is also
the value recommended in RFC 6347, section 4.1.2.6. Document those fields while
I'm here.
Change-Id: I8481ee0765ff3d261a96a2e1a53b6ad6695b2d42
Reviewed-on: https://boringssl-review.googlesource.com/2222
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
One of them was never implemented upstream or downstream. The other no longer
works in BoringSSL. They're not used within BoringSSL (this still compiles),
even in X509_INFO, and do not appear to be used by consumers. If they were, we
would like to know via a compile failure.
This removes the last consumer within BoringSSL of the ASN.1 parsing macros.
Change-Id: Ifb72b1fcd0a4f7b3e6b081486f8638110872334b
Reviewed-on: https://boringssl-review.googlesource.com/2203
Reviewed-by: Adam Langley <agl@google.com>
Remove the existing md5_test and sha1_test. They now are all covered by
digest_test. For good measure, test the one-shot functions too.
Change-Id: I8e144cc563fb8817144e26cbd2e10c15642464ba
Reviewed-on: https://boringssl-review.googlesource.com/2211
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
This code isn't compiled in. It seems there was some half-baked logic for a
7-byte alert that includes more information about handshake messages
retransmit.
No such alert exists, and the code had a FIXME anyway. If it gets resurrected
in DTLS 1.3 or some extension, we can deal with it then.
Change-Id: I8784ea8ee44bb8da4b0fe5d5d507997526557432
Reviewed-on: https://boringssl-review.googlesource.com/2121
Reviewed-by: Adam Langley <agl@google.com>
This is no longer used but, by retaining it, we might miss cases where
code is still testing against it.
Change-Id: I40ed47e41f903aaf2c5e5354d4348f8890021382
Reviewed-on: https://boringssl-review.googlesource.com/2110
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
X509_NAME is one of the symbols that collide with wincrypt.h. Move it to x509.h
so libraries which only use the pure-crypto portions of BoringSSL without X.509
needn't have to resolve the collision.
Change-Id: I057873498e58fe4a4cf264356f9a58d7a15397b7
Reviewed-on: https://boringssl-review.googlesource.com/2080
Reviewed-by: Adam Langley <agl@google.com>
It was already almost there. Just a malloc failure away. now all the
EVP_Digest{Sign,Verify}* functions may be used without worrying about -1 return
values.
Change-Id: I96a9750b300010615979bd5f1522b1d241764665
Reviewed-on: https://boringssl-review.googlesource.com/2064
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the old two-pass version of the function. If the ticket is too long,
replace it with a placeholder value but keep the connection working.
Change-Id: Ib9fdea66389b171862143d79b5540ea90a9bd5fb
Reviewed-on: https://boringssl-review.googlesource.com/2011
Reviewed-by: Adam Langley <agl@google.com>
The old ones inverted their return value. Add SSL_(CTX_)set_srtp_profiles which
return success/failure correctly and deprecate the old functions. Also align
srtp.h with the new style since it's very short.
When this rolls through, we can move WebRTC over to the new ones.
Change-Id: Ie55282e8858331910bba6ad330c8bcdd0e38f2f8
Reviewed-on: https://boringssl-review.googlesource.com/2060
Reviewed-by: Adam Langley <agl@google.com>
No more need for all the macros. For now, this still follows the two-pass i2d_*
API despite paying a now-unnecessary malloc. The follow-on commit will expose a
more reasonable API and deprecate this one.
Change-Id: I50ec63e65afbd455ad3bcd2f1ae3c782d9e8f9d2
Reviewed-on: https://boringssl-review.googlesource.com/2000
Reviewed-by: Adam Langley <agl@google.com>
Do away with all those unreadable macros. Also fix many many memory leaks in
the SSL_SESSION reuse case. Add a number of helper functions in CBS to help
with parsing optional fields.
Change-Id: I2ce8fd0d5b060a1b56e7f99f7780997fabc5ce41
Reviewed-on: https://boringssl-review.googlesource.com/1998
Reviewed-by: Adam Langley <agl@google.com>
Companion to CBS_get_asn1_uint64. Also add tests for both the parsing and the
serializing.
Change-Id: Ic5e9a0089c88b300f874712d0e9964cb35a8c40b
Reviewed-on: https://boringssl-review.googlesource.com/1999
Reviewed-by: Adam Langley <agl@google.com>
This was there since OpenSSL's initial commit and doesn't appear to serve any
purpose anymore. There's also an instance in x509_vfy.h, but this does not
actually appear to be a no-op because the headers include each other.
Change-Id: I6dee04538bdb3fd91a5da3c71c9d0027443b6bbc
Reviewed-on: https://boringssl-review.googlesource.com/2020
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
Intended to make parsing ASN.1 structures with OPTIONAL elements easier. (Just
attempting to parse the next tag doesn't distinguish between a malformed CBS
which has now been partially advanced and an optional tag mismatch.)
Change-Id: Idceb3dfd6ec028e87e1bc5aaddcec177b0c32150
Reviewed-on: https://boringssl-review.googlesource.com/1995
Reviewed-by: Adam Langley <agl@google.com>
The same library code applies for both the error and the function, so modules
cannot easily report errors from each other. Switch evp/algorithm.c's error
codes to the EVP library. Remove the original error codes so it's obvious some
changes are needed.
- X509_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED -> EVP_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED
ASN1_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED -> EVP_R_DIGEST_AND_KEY_TYPE_NOT_SUPPORTED
(Actually, the X509 version of this error code doesn't exist in OpenSSL. It should
have been ASN1.)
- ASN1_R_UNKNOWN_SIGNATURE_ALGORITHM -> EVP_R_UNKNOWN_SIGNATURE_ALGORITHM
- ASN1_R_WRONG_PUBLIC_KEY_TYPE -> EVP_R_WRONG_PUBLIC_KEY_TYPE
- ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM -> EVP_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM
Change-Id: I05b1a05b465d800c85f7d63ca74588edf40847b9
Reviewed-on: https://boringssl-review.googlesource.com/1940
Reviewed-by: Adam Langley <agl@google.com>
Implementations of ENGINEs often don't want to implement every function.
This change adds an error code for those situations.
Change-Id: Id6b7eace36d06ffad7f347f556d942d447d8a2fd
Reviewed-on: https://boringssl-review.googlesource.com/1920
Reviewed-by: Wan-Teh Chang <wtc@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Factor the AlgorithmIdentifier portions of ASN1_item_sign and ASN1_item_verify
out. This makes it possible to initialize a signature context from an
AlgorithmIdentifier without needing the data parsed into an ASN1_ITEM/void*
pair and reserialized.
Change-Id: Idc2e06b1310a3f801aa25de323d39d2b7a44ef50
Reviewed-on: https://boringssl-review.googlesource.com/1916
Reviewed-by: Adam Langley <agl@google.com>
Verified that nothing uses it.
Change-Id: I1755144129e274f3d1680ddb8cb12273070eb078
Reviewed-on: https://boringssl-review.googlesource.com/1912
Reviewed-by: Adam Langley <agl@google.com>
One ASN1_R_UNKNOWN_FORMAT got mispelled into ASN1_R_UNKOWN_FORMAT and
duplicated.
Change-Id: If123ef848ffe68afa021f5f3e3fb08eac92c5f94
Reviewed-on: https://boringssl-review.googlesource.com/1911
Reviewed-by: Adam Langley <agl@google.com>
I misunderstood the OpenSSL semantics here. When receiving an error data
pointer via ERR_get_error_line_data and friends, although the error is
cleared, OpenSSL retains ownership of the data pointer. It's kept in the
cleared error until another error overrides it, or the whole error queue
is cleared.
It's pretty odd to have live pointers in empty errors so this change
allows an error queue to retain one data pointer. Thus the pointer
returned from ERR_get_error_line_data is valid until the next call to
ERR_get_error_line_data, or until the queue is freed.
From reviewing uses of the API, this is sufficient for all of them.
Change-Id: I73cb8e9c792452ae3c1a934ac8bbe8b5353b65b2
Reviewed-on: https://boringssl-review.googlesource.com/1880
Reviewed-by: Adam Langley <agl@google.com>
