This is only applicable for renego and is wrong anyway. The handshake_read_seq
check doesn't account for message reordering. The correct check is if we
haven't yet processed the peer's CCS in the current handshake.
(The other Finished special-case needs to stay, however.)
Change-Id: Ic42897aab7140285ce2f3be24d52b81851b912b5
Reviewed-on: https://boringssl-review.googlesource.com/3231
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
We have no use for DTLS renego and it's even more complex than TLS renego.
Change-Id: I8680ab361cc8761dd7fc8dfb1bfe1ff4abc6612f
Reviewed-on: https://boringssl-review.googlesource.com/3218
Reviewed-by: Adam Langley <agl@google.com>
For now, only test reorderings when we always or never fragment messages.
There's a third untested case: when full messages and fragments are mixed. That
will be tested later after making it actually work.
Change-Id: Ic4efb3f5e87b1319baf2d4af31eafa40f6a50fa6
Reviewed-on: https://boringssl-review.googlesource.com/3216
Reviewed-by: Adam Langley <agl@google.com>
No behavior change. This is in preparation for buffering a flight of handshake
messages to reorder vigorously on flush.
Change-Id: Ic348829b340bf58d28f332027646559cb11046ac
Reviewed-on: https://boringssl-review.googlesource.com/3215
Reviewed-by: Adam Langley <agl@google.com>
It dates to 2000 from upstream and is only used when serving client auth to
Netscape. It will also get in the way when we get to merging DTLS and TLS
handshake functions because NETSCAPE_HANG_BUG is not valid for DTLS as it is
(the handshake fragmentation code will get confused).
Removing per comment on https://boringssl-review.googlesource.com/#/c/2602/
Change-Id: Ia2d086205bbfed002dc33b2203a47206f373b820
Reviewed-on: https://boringssl-review.googlesource.com/3214
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c67a3ae6ba. With a
deterministic clock, we can now go back to being strict about retransmits. Our
tests will now require that the shim only retransmit when we expect it to.
Change-Id: Iab1deb9665dcd294790c8253d920089e83a9140c
Reviewed-on: https://boringssl-review.googlesource.com/3211
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The variable switches the default type for add_library from STATIC to SHARED.
We can condition additional stuff on that for convenience. (tabtest still
doesn't build.)
BoringSSL as any kind of stable system shared library is still very much
unsupported, but this is probably handy for making sure we don't forget all
those pesky OPENSSL_EXPORTs.
Change-Id: I66ab80bcddbf3724e03e85384141fdf4f4acbc2e
Reviewed-on: https://boringssl-review.googlesource.com/3092
Reviewed-by: Adam Langley <agl@google.com>
This is fatal for TLS but buffered in DTLS. The buffering isn't strictly
necessary (it would be just as valid to drop the record on the floor), but so
long as we want this behavior it should have a test.
Change-Id: I5846bb2fe80d78e25b6dfad51bcfcff2dc427c3f
Reviewed-on: https://boringssl-review.googlesource.com/3029
Reviewed-by: Adam Langley <agl@google.com>
They're not in the duplicated handshake state machines anyway. But we still
shouldn't negotiate them. d1_pkt.c assumes Finished is the only post-CCS
handshake message. An unexpected handshake message in the current epoch may
either be a retransmit/out-of-order message from the previous handshake, or a
message from the next handshake (also potentially out-of-order). In the former
case, we shouldn't spin up another handshake state machine instance.
(This assumption is required due to a protocol bug. DTLS resets sequence
numbers after a handshake, so it is necessary to categorize handshake fragments
by pre-CCS and post-CCS to distinguish between retransmit and renego.)
Change-Id: Ib3c1c7085c729e36a40f7ff14494733156924a24
Reviewed-on: https://boringssl-review.googlesource.com/3028
Reviewed-by: Adam Langley <agl@google.com>
This regressed in e95d20dcb8. EVP_AEAD will push
errors on the error queue (unlike the EVP_CIPHER codepath which checked
everything internally to ssl/ and didn't bother pushing anything). This meant
that a dropped packet would leave junk in the error queue.
Later, when SSL_read returns <= 0 (EOF or EWOULDBLOCK), the non-empty error
queue check in SSL_get_error kicks in and SSL_read looks to have failed.
BUG=https://code.google.com/p/webrtc/issues/detail?id=4214
Change-Id: I1e5e41c77a3e5b71e9eb0c72294abf0da677f840
Reviewed-on: https://boringssl-review.googlesource.com/2982
Reviewed-by: Adam Langley <agl@google.com>
This regressed in fcf25833bc. 0 return code on
unclean shutdown means the underlying BIO returned EOF, didn't push any error
code, but we haven't seen close_notify yet. The intent seems to be that you go
check errno or some BIO-specific equivalent if you care about close_notify.
Make sure test code routes all SSL_read return codes through SSL_get_error
since that's supposed to work in all cases.
(Note that rv == 0 can still give SSL_ERROR_SSL if the error queue is not
empty.)
Change-Id: I45bf9614573f876d93419ce169a4e0d9ceea9052
Reviewed-on: https://boringssl-review.googlesource.com/2981
Reviewed-by: Adam Langley <agl@google.com>
The distinction between publicly and non-publicly invalid is barely acted upon
and slightly silly now that the CBC padding check has been folded into
EVP_AEAD.
Change-Id: Idce4b9b8d29d624e3c95243a147265d071612127
Reviewed-on: https://boringssl-review.googlesource.com/2980
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
SSL_library_init already loads the error strings (unlike upstream). Code which
calls both will end up loading error strings twice. Instead make the second
call a no-op.
Change-Id: Ifd34ab20ed46aabeba14661e58f8dac2bbb29f69
Reviewed-on: https://boringssl-review.googlesource.com/2790
Reviewed-by: Adam Langley <agl@google.com>
The under 32 constraint is silly; it's to check for duplicate curves in
library-supplied configuration. That API is new as of 1.0.2. It doesn't seem
worth bothering; if the caller supplies a repeated value, may as well emit a
repeated one and so be it. (Probably no one will ever call that function
outside of maybe test code anyway.)
While I'm here, remove the 0 constraint too. It's not likely to change, but
removing the return value overload seems easier than keeping comments about it
comments about it.
Change-Id: I01d36dba1855873875bb5a0ec84b040199e0e9bc
Reviewed-on: https://boringssl-review.googlesource.com/2844
Reviewed-by: Adam Langley <agl@google.com>
We only implement four curves (P-224, P-256, P-384, and P-521) and only
advertise the latter three by default. Don't maintain entries corresponding to
all the unimplemented curves.
Change-Id: I1816a10c6f849ca1d9d896bc6f4b64cd6b329481
Reviewed-on: https://boringssl-review.googlesource.com/2843
Reviewed-by: Adam Langley <agl@google.com>
They both happen to be zero, but OBJ_undef is a type error; OBJ_foo expands to
a comma-separated list of integers.
Change-Id: Ia5907dd3bc83240b7cc98af6456115d2efb48687
Reviewed-on: https://boringssl-review.googlesource.com/2842
Reviewed-by: Adam Langley <agl@google.com>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
(Imported from upstream's 4f605ccb779e32a770093d687e0554e0bbb137d3)
More state that should be systematically reset across handshakes. Add a reset
on the ServerHello end too since that was missed.
Change-Id: Ibb4549acddfd87caf7b6ff853e2adbfa4b7e7856
Reviewed-on: https://boringssl-review.googlesource.com/2838
Reviewed-by: Adam Langley <agl@google.com>
write_quota should only be decremented by 1 in datagram mode, otherwise we'll
underflow and always allow writes through. This does not cause any existing
tests to fail.
(It will be useful once the bug in dtls1_do_write is fixed.)
Change-Id: I42aa001d7264790a3726269890635f679497fb1c
Reviewed-on: https://boringssl-review.googlesource.com/2831
Reviewed-by: Adam Langley <agl@google.com>
The existing comments are not very helpful. This code is also quite buggy.
Document two of them as TODOs.
Change-Id: Idfaf93d9c3b8b1ee92f2fb0d292ef513b5f6d824
Reviewed-on: https://boringssl-review.googlesource.com/2830
Reviewed-by: Adam Langley <agl@google.com>
BIO_ctrls do not have terribly well-defined return values on error. (Though the
existing ones seem to all return 0, not -1, on nonexistant operation.)
Change-Id: I08497f023ce3257c253aa71517a98b2fe73c3f74
Reviewed-on: https://boringssl-review.googlesource.com/2829
Reviewed-by: Adam Langley <agl@google.com>
g_probably_mtu and dtls1_guess_mtu is a bunch of logic for guessing the right
MTU, but it only ever returns the maximum (the input is always zero). Trim that
down to only what it actually does.
Change-Id: If3afe3f68ccb36cbf9c4525372564d16a4bbb73f
Reviewed-on: https://boringssl-review.googlesource.com/2828
Reviewed-by: Adam Langley <agl@google.com>
The retry doesn't actually work when we're sending a non-initial fragment; the
s->init_off != 0 block will get re-run each iteration through and continually
prepend headers. It can also infinite loop if the BIO reports
BIO_CTRL_DGRAM_MTU_EXCEEDED but either fails to report an MTU or reports an MTU
that always rounds up to the minimum. See upstream's
d3d9eef31661633f5b003a9e115c1822f79d1870.
WebRTC doesn't participate in any of the MTU logic and inherits the default
MTU, so just remove it for now.
Change-Id: Ib2ed2ba016b7c229811741fb7369c015ba0b551f
Reviewed-on: https://boringssl-review.googlesource.com/2827
Reviewed-by: Adam Langley <agl@google.com>
That setting means that the MTU is provided externally via SSL_set_mtu.
(Imported from upstream's 001235778a6e9c645dc0507cad6092d99c9af8f5)
Change-Id: I4e5743a9dee734ddd0235f080aefe98a7365aaf6
Reviewed-on: https://boringssl-review.googlesource.com/2826
Reviewed-by: Adam Langley <agl@google.com>
Based in part on upstream's cf75017bfd60333ff65edf9840001cd2c49870a3. This
situation really shouldn't be able to happen, but between no static asserts
that the minimum MTU is always large enough and a bug in reseting the MTU later
(to be fixed be a follow-up import from upstream), check these and return a
useful error code.
Change-Id: Ie853e5d35a6a7bc9c0032e74ae71529d490f4fe2
Reviewed-on: https://boringssl-review.googlesource.com/2825
Reviewed-by: Adam Langley <agl@google.com>
BoringSSL currently retransmits non-deterministically on an internal timer
(rather than one supplied externally), so the tests currently fail flakily
depending on timing. Valgrind is a common source for this. We still assume an
in-order and reliable channel, but drop retransmits silently:
- Handshake messages may arrive with old sequence numbers.
- Retransmitted CCS records arrive from the previous epoch.
- We may receive a retransmitted Finished after we believe the handshake has
completed. (Aside: even in a real implementation, only Finished is possible
here. Even with out-of-order delivery, retransmitted or reordered messages
earlier in the handshake come in under a different epoch.)
Note that because DTLS renego and a Finished retransmit are ambiguous at the
record layer[*], this precludes us writing tests for DTLS renego. But DTLS
renego should get removed anyway. As BoringSSL currently implements renego,
this ambiguity is also a source of complexity in the real implementation. (See
the SSL3_MT_FINISHED check in dtls1_read_bytes.)
[*] As a further fun aside, it's also complex if dispatching renego vs Finished
after handshake message reassembly. The spec doesn't directly say the sequence
number is reset across renegos, but it says "The first message each side
transmits in /each/ handshake always has message_seq = 0". This means that such
an implementation needs the handshake message reassembly logic be aware that a
Finished fragment with high sequence number is NOT an out-of-order fragment for
the next handshake.
Change-Id: I35d13560f82bcb5eeda62f4de1571d28c818cc36
Reviewed-on: https://boringssl-review.googlesource.com/2770
Reviewed-by: Adam Langley <agl@google.com>
As of our 82b7da271f, an SSL_SESSION created
externally always has a cipher set. Unknown ciphers are rejected early. Prior
to that, an SSL_SESSION would only have a valid cipher or valid cipher_id
depending on whether it came from an internal or external session cache.
See upstream's 6a8afe2201cd888e472e44225d3c9ca5fae1ca62 and
c566205319beeaa196e247400c7eb0c16388372b for more context.
Since we don't get ourselves into this strange situation and s->cipher is now
always valid for established SSL_SESSION objects (the existence of
unestablished SSL_SESSION objects during a handshake is awkward, but something
to deal with later), do away with s->cipher_id altogether. An application
should be able to handle failing to parse an SSL_SESSION instead of parsing it
successfuly but rejecting all resumptions.
Change-Id: I2f064a815e0db657b109c7c9269ac6c726d1ffed
Reviewed-on: https://boringssl-review.googlesource.com/2703
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
This introduces another knob into SSL_AEAD_CTX to omit the version from the ad
parameter. It also allows us to fold a few more SSL3_ENC_METHOD hooks together.
Change-Id: I6540d410d4722f734093554fb434dab6e5217d4f
Reviewed-on: https://boringssl-review.googlesource.com/2698
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
Fix up the generate_master_secret parameter while we're here.
Change-Id: I1c80796d1f481be0c3eefcf3222f2d9fc1de4a51
Reviewed-on: https://boringssl-review.googlesource.com/2696
Reviewed-by: Adam Langley <agl@google.com>
size_t all the parameters. Also explicitly label label as label. This is in
preparation for pulling the PRF out into SSL3_ENC_METHOD so more of the
SSL3_ENC_METHOD hooks may be shared between SSLv3 and TLS once SSLv3 uses
stateful AEADs.
Also port away from EVP_PKEY_HMAC and use HMAC_CTX directly. The abstraction
doesn't buy much and is different from all the other EVP_DigestSign* functions.
There are few enough users within BoringSSL and Google that we can probably
deprecate and eventually remove it altogether.
Change-Id: I5d4529438c8a2a992fc199388a0c9e73bd6d2e06
Reviewed-on: https://boringssl-review.googlesource.com/2695
Reviewed-by: Adam Langley <agl@google.com>
