|CRYPTO_memcmp| isn't necessary because there is no secret data being
acted on here.
Change-Id: Ib678d5d4fc16958aca409a93df139bdff8cb73fb
Reviewed-on: https://boringssl-review.googlesource.com/7465
Reviewed-by: David Benjamin <davidben@google.com>
The same check is already done in |RSA_verify_raw|, so |RSA_verify|
doesn't need to do it.
Also, move the |RSA_verify_raw| check earlier.
Change-Id: I15f7db0aad386c0f764bba53e77dfc46574f7635
Reviewed-on: https://boringssl-review.googlesource.com/7463
Reviewed-by: David Benjamin <davidben@google.com>
We do not need to support engine-provided verification methods.
Change-Id: Iaad8369d403082b728c831167cc386fdcabfb067
Reviewed-on: https://boringssl-review.googlesource.com/7311
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
I messed up a few of these.
ASN1_R_UNSUPPORTED_ALGORITHM doesn't exist. X509_R_UNSUPPORTED_ALGORITHM does
exist as part of X509_PUBKEY_set, but the SPKI parser doesn't emit this. (I
don't mind the legacy code having really weird errors, but since EVP is now
limited to things we like, let's try to keep that clean.) To avoid churn in
Conscrypt, we'll keep defining X509_R_UNSUPPORTED_ALGORITHM, but not actually
do anything with it anymore. Conscrypt was already aware of
EVP_R_UNSUPPORTED_ALGORITHM, so this should be fine. (I don't expect
EVP_R_UNSUPPORTED_ALGORITHM to go away. The SPKI parsers we like live in EVP
now.)
A few other ASN1_R_* values didn't quite match upstream, so make those match
again. Finally, I got some of the rsa_pss.c values wrong. Each of those
corresponds to an (overly specific) RSA_R_* value in upstream. However, those
were gone in BoringSSL since even the initial commit. We placed the RSA <-> EVP
glue in crypto/evp (so crypto/rsa wouldn't depend on crypto/evp) while upstream
placed them in crypto/rsa.
Since no one seemed to notice the loss of RSA_R_INVALID_SALT_LENGTH, let's undo
all the cross-module errors inserted in crypto/rsa. Instead, since that kind of
specificity is not useful, funnel it all into X509_R_INVALID_PSS_PARAMETERS
(formerly EVP_R_INVALID_PSS_PARAMETERS, formerly RSA_R_INVALID_PSS_PARAMETERS).
Reset the error codes for all affected modules.
(That our error code story means error codes are not stable across this kind of
refactoring is kind of a problem. Hopefully this will be the last of it.)
Change-Id: Ibfb3a0ac340bfc777bc7de6980ef3ddf0a8c84bc
Reviewed-on: https://boringssl-review.googlesource.com/7458
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
People seem to condition on these a lot. Since this code has now been moved
twice, just make them all cross-module errors rather than leave a trail of
renamed error codes in our wake.
Change-Id: Iea18ab3d320f03cf29a64a27acca119768c4115c
Reviewed-on: https://boringssl-review.googlesource.com/7431
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
C has implicit conversion of |void *| to other pointer types so these
casts are unnecessary. Clean them up to make the code easier to read
and to make it easier to find dangerous casts.
Change-Id: I26988a672e8ed4d69c75cfbb284413999b475464
Reviewed-on: https://boringssl-review.googlesource.com/7102
Reviewed-by: David Benjamin <davidben@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Although those are only created by code owned by RSA_METHOD, custom RSA_METHODs
shouldn't be allowed to squat our internal fields and then change how you free
things.
Remove 'method' from their names now that they're not method-specific.
Change-Id: I9494ef9a7754ad59ac9fba7fd463b3336d826e0b
Reviewed-on: https://boringssl-review.googlesource.com/6423
Reviewed-by: Adam Langley <agl@google.com>
This restores the original semantics of the finished hook.
Change-Id: I70da393c7e66fb6e3be1e2511e08b34bb54fc0b4
Reviewed-on: https://boringssl-review.googlesource.com/6422
Reviewed-by: Adam Langley <agl@google.com>
Having a single RSA_METHOD means they all get pulled in. Notably, RSA key
generation pulls in the primality-checking code.
Change-Id: Iece480113754da090ddf87b64d8769f01e05d26c
Reviewed-on: https://boringssl-review.googlesource.com/6389
Reviewed-by: Adam Langley <agl@google.com>
CRYPTO_MUTEX_init needs a CRYPTO_MUTEX_cleanup. Also a pile of problems
with x509_lu.c I noticed trying to import some upstream change.
Change-Id: I029a65cd2d30aa31f4832e8fbfe5b2ea0dbc66fe
Reviewed-on: https://boringssl-review.googlesource.com/6346
Reviewed-by: Adam Langley <alangley@gmail.com>
This extends 79c59a30 to |RSA_public_encrypt|, |RSA_private_encrypt|,
and |RSA_public_decrypt|. It benefits Conscrypt, which expects these
functions to have the same signature as |RSA_public_private_decrypt|.
Change-Id: Id1ce3118e8f20a9f43fd4f7bfc478c72a0c64e4b
Reviewed-on: https://boringssl-review.googlesource.com/6286
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Platform crypto APIs for PKCS#1 RSA signatures vary between expecting the
caller to prepend the DigestInfo prefix (RSA_sign_raw) and prepending it
internally (RSA_sign). Currently, Chromium implements sign or sign_raw as
appropriate. To avoid needing both variants, the new asynchronous methods will
only expose the higher-level one, sign.
To satisfy ports which previously implemented sign_raw, expose the DigestInfo
prefix as a utility function.
BUG=347404
Change-Id: I04c397b5e9502b2942f6698ecf81662a3c9282e6
Reviewed-on: https://boringssl-review.googlesource.com/4940
Reviewed-by: Adam Langley <agl@google.com>
This change converts the reference counts in crypto/ to use
|CRYPTO_refcount_t|. The reference counts in |X509_PKEY| and |X509_INFO|
were never actually used and so were dropped.
Change-Id: I75d572cdac1f8c1083c482e29c9519282d7fd16c
Reviewed-on: https://boringssl-review.googlesource.com/4772
Reviewed-by: Adam Langley <agl@google.com>
Finish up crypto, minus the legacy modules we haven't been touching much.
Change-Id: I0e9e1999a627aed5fb14841f8a2a7d0b68398e85
Reviewed-on: https://boringssl-review.googlesource.com/4517
Reviewed-by: Adam Langley <agl@google.com>
Instead, each module defines a static CRYPTO_EX_DATA_CLASS to hold the values.
This makes CRYPTO_cleanup_all_ex_data a no-op as spreading the
CRYPTO_EX_DATA_CLASSes across modules (and across crypto and ssl) makes cleanup
slightly trickier. We can make it do something if needbe, but it's probably not
worth the trouble.
Change-Id: Ib6f6fd39a51d8ba88649f0fa29c66db540610c76
Reviewed-on: https://boringssl-review.googlesource.com/4375
Reviewed-by: Adam Langley <agl@google.com>
OpenSSH, especially, does some terrible things that mean that it needs
the EVP_CIPHER structure to be exposed ☹. Damian is open to a better API
to replace this, but only if OpenSSL agree too. Either way, it won't be
happening soon.
Change-Id: I393b7a6af6694d4d2fe9ebcccd40286eff4029bd
Reviewed-on: https://boringssl-review.googlesource.com/4330
Reviewed-by: Adam Langley <agl@google.com>
This introduces a per-RSA/DSA/DH lock. This is good for lock contention,
although pthread locks are depressingly bloated.
Change-Id: I07c4d1606fc35135fc141ebe6ba904a28c8f8a0c
Reviewed-on: https://boringssl-review.googlesource.com/4324
Reviewed-by: Adam Langley <agl@google.com>
Beyond generally eliminating unnecessary includes, eliminate as many
includes of headers that declare/define particularly error-prone
functionality like strlen, malloc, and free. crypto/err/internal.h was
added to remove the dependency on openssl/thread.h from the public
openssl/err.h header. The include of <stdlib.h> in openssl/mem.h was
retained since it defines OPENSSL_malloc and friends as macros around
the stdlib.h functions. The public x509.h, x509v3.h, and ssl.h headers
were not changed in order to minimize breakage of source compatibility
with external code.
Change-Id: I0d264b73ad0a720587774430b2ab8f8275960329
Reviewed-on: https://boringssl-review.googlesource.com/4220
Reviewed-by: Adam Langley <agl@google.com>
C4701 is "potentially uninitialized local variable 'buf' used". It
sometimes results in false positives, which can now be suppressed
using the macro OPENSSL_SUPPRESS_POTENTIALLY_UNINITIALIZED_WARNINGS.
Change-Id: I15068b5a48e1c704702e7752982b9ead855e7633
Reviewed-on: https://boringssl-review.googlesource.com/3160
Reviewed-by: Adam Langley <agl@google.com>
Quite a few functions reported wrong function names when pushing
to the error stack.
Change-Id: I84d89dbefd2ecdc89ffb09799e673bae17be0e0f
Reviewed-on: https://boringssl-review.googlesource.com/4080
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is intended for TLS client auth with Windows CAPI- and CNG-backed keys
which implement sign over sign_raw and do not support all hash functions. Only
plumbed through RSA for now.
Change-Id: Ica42e7fb026840f817a169da9372dda226f7d6fd
Reviewed-on: https://boringssl-review.googlesource.com/2250
Reviewed-by: Adam Langley <agl@google.com>
This change extracts two, common parts of RSA_decrypt and RSA_sign into
a function called |private_transform|. It also allows this to be
overridden in a method, which is convenient for opaque keys that only
expose the raw RSA transform as it means that the padding code from
BoringSSL can be easily reimplemented.
One significant change here is that short RSA ciphertexts will no longer
be accepted. I think this is correct and OpenSSL has a comment about PGP
mistakenly stripping leading zeros. However, these is the possibility
that it could break something.
Change-Id: I258c5cbbf21314cc9b6e8d2a2b898fd9a440cd40
Reviewed-on: https://boringssl-review.googlesource.com/1554
Reviewed-by: Adam Langley <agl@google.com>
Custom RSA and ECDSA keys may not expose the key material. Plumb and "opaque"
bit out of the *_METHOD up to EVP_PKEY. Query that in ssl_rsa.c to skip the
sanity checks for certificate and key matching.
Change-Id: I362a2d5116bfd1803560dfca1d69a91153e895fc
Reviewed-on: https://boringssl-review.googlesource.com/1255
Reviewed-by: Adam Langley <agl@google.com>
This is to avoid having to copy over the RSA modulus in all of Chromium's
platform-specific keys.
Change-Id: I20bf22446a5cfb633b900c3b392b7a1da81a5431
Reviewed-on: https://boringssl-review.googlesource.com/1151
Reviewed-by: Adam Langley <agl@google.com>
Some RSA private keys are specified with only n, e and d. Although we
can use these keys directly, it's nice to have a uniform representation
that includes the precomputed CRT values. This change adds a function
that can recover the primes from a minimal private key of that form.
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
