96b05ed487
It's not clear that CPUID will always report the correct value here, especially for hyper-threading environments. It also isn't clear that the assumptions made by AMD processors are correct and will always be correct. It also seems likely that, if a code path is security-sensitive w.r.t. SMT, it is probably also security-sensitive w.r.t. other processor (mis)features. Finally, it isn't clear that all dynamic analysis (fuzzing, SDE, etc.) is done separately for the cross product of all CPU feature combinations * the value of this bit. With all that in mind, instruct code sensitive to this bit to always choose the more conservative path. I only found one place that's sensitive to this bit, though I didn't look too hard: ``` aes_nohw_cbc_encrypt: [...] leaq OPENSSL_ia32cap_P(%rip),%r10 mov (%r10), %r10d [...] bt \$28,%r10d jc .Lcbc_slow_prologue ``` I didn't verify that the code in the HTT-enabled paths is any better than the code in the HTT-disabled paths. Change-Id: Ifd643e6a1301e5ca2174b84c344eb933d49e0067 Reviewed-on: https://boringssl-review.googlesource.com/c/33404 Reviewed-by: David Benjamin <davidben@google.com> Reviewed-by: Adam Langley <agl@google.com> Commit-Queue: Adam Langley <agl@google.com>
268 lines
9.2 KiB
C
268 lines
9.2 KiB
C
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
|
|
* All rights reserved.
|
|
*
|
|
* This package is an SSL implementation written
|
|
* by Eric Young (eay@cryptsoft.com).
|
|
* The implementation was written so as to conform with Netscapes SSL.
|
|
*
|
|
* This library is free for commercial and non-commercial use as long as
|
|
* the following conditions are aheared to. The following conditions
|
|
* apply to all code found in this distribution, be it the RC4, RSA,
|
|
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
|
|
* included with this distribution is covered by the same copyright terms
|
|
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
|
|
*
|
|
* Copyright remains Eric Young's, and as such any Copyright notices in
|
|
* the code are not to be removed.
|
|
* If this package is used in a product, Eric Young should be given attribution
|
|
* as the author of the parts of the library used.
|
|
* This can be in the form of a textual message at program startup or
|
|
* in documentation (online or textual) provided with the package.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* "This product includes cryptographic software written by
|
|
* Eric Young (eay@cryptsoft.com)"
|
|
* The word 'cryptographic' can be left out if the rouines from the library
|
|
* being used are not cryptographic related :-).
|
|
* 4. If you include any Windows specific code (or a derivative thereof) from
|
|
* the apps directory (application code) you must include an acknowledgement:
|
|
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* The licence and distribution terms for any publically available version or
|
|
* derivative of this code cannot be changed. i.e. this code cannot simply be
|
|
* copied and put under another distribution licence
|
|
* [including the GNU Public Licence.] */
|
|
|
|
#include <openssl/cpu.h>
|
|
|
|
|
|
#if !defined(OPENSSL_NO_ASM) && (defined(OPENSSL_X86) || defined(OPENSSL_X86_64))
|
|
|
|
#include <inttypes.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
|
|
#if defined(_MSC_VER)
|
|
OPENSSL_MSVC_PRAGMA(warning(push, 3))
|
|
#include <immintrin.h>
|
|
#include <intrin.h>
|
|
OPENSSL_MSVC_PRAGMA(warning(pop))
|
|
#endif
|
|
|
|
#include "internal.h"
|
|
|
|
|
|
// OPENSSL_cpuid runs the cpuid instruction. |leaf| is passed in as EAX and ECX
|
|
// is set to zero. It writes EAX, EBX, ECX, and EDX to |*out_eax| through
|
|
// |*out_edx|.
|
|
static void OPENSSL_cpuid(uint32_t *out_eax, uint32_t *out_ebx,
|
|
uint32_t *out_ecx, uint32_t *out_edx, uint32_t leaf) {
|
|
#if defined(_MSC_VER)
|
|
int tmp[4];
|
|
__cpuid(tmp, (int)leaf);
|
|
*out_eax = (uint32_t)tmp[0];
|
|
*out_ebx = (uint32_t)tmp[1];
|
|
*out_ecx = (uint32_t)tmp[2];
|
|
*out_edx = (uint32_t)tmp[3];
|
|
#elif defined(__pic__) && defined(OPENSSL_32_BIT)
|
|
// Inline assembly may not clobber the PIC register. For 32-bit, this is EBX.
|
|
// See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=47602.
|
|
__asm__ volatile (
|
|
"xor %%ecx, %%ecx\n"
|
|
"mov %%ebx, %%edi\n"
|
|
"cpuid\n"
|
|
"xchg %%edi, %%ebx\n"
|
|
: "=a"(*out_eax), "=D"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
|
|
: "a"(leaf)
|
|
);
|
|
#else
|
|
__asm__ volatile (
|
|
"xor %%ecx, %%ecx\n"
|
|
"cpuid\n"
|
|
: "=a"(*out_eax), "=b"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
|
|
: "a"(leaf)
|
|
);
|
|
#endif
|
|
}
|
|
|
|
// OPENSSL_xgetbv returns the value of an Intel Extended Control Register (XCR).
|
|
// Currently only XCR0 is defined by Intel so |xcr| should always be zero.
|
|
static uint64_t OPENSSL_xgetbv(uint32_t xcr) {
|
|
#if defined(_MSC_VER)
|
|
return (uint64_t)_xgetbv(xcr);
|
|
#else
|
|
uint32_t eax, edx;
|
|
__asm__ volatile ("xgetbv" : "=a"(eax), "=d"(edx) : "c"(xcr));
|
|
return (((uint64_t)edx) << 32) | eax;
|
|
#endif
|
|
}
|
|
|
|
// handle_cpu_env applies the value from |in| to the CPUID values in |out[0]|
|
|
// and |out[1]|. See the comment in |OPENSSL_cpuid_setup| about this.
|
|
static void handle_cpu_env(uint32_t *out, const char *in) {
|
|
const int invert = in[0] == '~';
|
|
uint64_t v;
|
|
|
|
if (!sscanf(in + invert, "%" PRIu64, &v)) {
|
|
return;
|
|
}
|
|
|
|
if (invert) {
|
|
out[0] &= ~v;
|
|
out[1] &= ~(v >> 32);
|
|
} else {
|
|
out[0] = v;
|
|
out[1] = v >> 32;
|
|
}
|
|
}
|
|
|
|
void OPENSSL_cpuid_setup(void) {
|
|
// Determine the vendor and maximum input value.
|
|
uint32_t eax, ebx, ecx, edx;
|
|
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0);
|
|
|
|
uint32_t num_ids = eax;
|
|
|
|
int is_intel = ebx == 0x756e6547 /* Genu */ &&
|
|
edx == 0x49656e69 /* ineI */ &&
|
|
ecx == 0x6c65746e /* ntel */;
|
|
int is_amd = ebx == 0x68747541 /* Auth */ &&
|
|
edx == 0x69746e65 /* enti */ &&
|
|
ecx == 0x444d4163 /* cAMD */;
|
|
|
|
int has_amd_xop = 0;
|
|
if (is_amd) {
|
|
// AMD-specific logic.
|
|
// See http://developer.amd.com/wordpress/media/2012/10/254811.pdf
|
|
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000000);
|
|
uint32_t num_extended_ids = eax;
|
|
if (num_extended_ids >= 0x80000001) {
|
|
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000001);
|
|
if (ecx & (1u << 11)) {
|
|
has_amd_xop = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
uint32_t extended_features[2] = {0};
|
|
if (num_ids >= 7) {
|
|
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 7);
|
|
extended_features[0] = ebx;
|
|
extended_features[1] = ecx;
|
|
}
|
|
|
|
OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 1);
|
|
|
|
// Force the hyper-threading bit so that the more conservative path is always
|
|
// chosen.
|
|
edx |= 1u << 28;
|
|
|
|
// Reserved bit #20 was historically repurposed to control the in-memory
|
|
// representation of RC4 state. Always set it to zero.
|
|
edx &= ~(1u << 20);
|
|
|
|
// Reserved bit #30 is repurposed to signal an Intel CPU.
|
|
if (is_intel) {
|
|
edx |= (1u << 30);
|
|
|
|
// Clear the XSAVE bit on Knights Landing to mimic Silvermont. This enables
|
|
// some Silvermont-specific codepaths which perform better. See OpenSSL
|
|
// commit 64d92d74985ebb3d0be58a9718f9e080a14a8e7f.
|
|
if ((eax & 0x0fff0ff0) == 0x00050670 /* Knights Landing */ ||
|
|
(eax & 0x0fff0ff0) == 0x00080650 /* Knights Mill (per SDE) */) {
|
|
ecx &= ~(1u << 26);
|
|
}
|
|
} else {
|
|
edx &= ~(1u << 30);
|
|
}
|
|
|
|
// The SDBG bit is repurposed to denote AMD XOP support.
|
|
if (has_amd_xop) {
|
|
ecx |= (1u << 11);
|
|
} else {
|
|
ecx &= ~(1u << 11);
|
|
}
|
|
|
|
uint64_t xcr0 = 0;
|
|
if (ecx & (1u << 27)) {
|
|
// XCR0 may only be queried if the OSXSAVE bit is set.
|
|
xcr0 = OPENSSL_xgetbv(0);
|
|
}
|
|
// See Intel manual, volume 1, section 14.3.
|
|
if ((xcr0 & 6) != 6) {
|
|
// YMM registers cannot be used.
|
|
ecx &= ~(1u << 28); // AVX
|
|
ecx &= ~(1u << 12); // FMA
|
|
ecx &= ~(1u << 11); // AMD XOP
|
|
// Clear AVX2 and AVX512* bits.
|
|
//
|
|
// TODO(davidben): Should bits 17 and 26-28 also be cleared? Upstream
|
|
// doesn't clear those.
|
|
extended_features[0] &=
|
|
~((1u << 5) | (1u << 16) | (1u << 21) | (1u << 30) | (1u << 31));
|
|
}
|
|
// See Intel manual, volume 1, section 15.2.
|
|
if ((xcr0 & 0xe6) != 0xe6) {
|
|
// Clear AVX512F. Note we don't touch other AVX512 extensions because they
|
|
// can be used with YMM.
|
|
extended_features[0] &= ~(1u << 16);
|
|
}
|
|
|
|
// Disable ADX instructions on Knights Landing. See OpenSSL commit
|
|
// 64d92d74985ebb3d0be58a9718f9e080a14a8e7f.
|
|
if ((ecx & (1u << 26)) == 0) {
|
|
extended_features[0] &= ~(1u << 19);
|
|
}
|
|
|
|
OPENSSL_ia32cap_P[0] = edx;
|
|
OPENSSL_ia32cap_P[1] = ecx;
|
|
OPENSSL_ia32cap_P[2] = extended_features[0];
|
|
OPENSSL_ia32cap_P[3] = extended_features[1];
|
|
|
|
const char *env1, *env2;
|
|
env1 = getenv("OPENSSL_ia32cap");
|
|
if (env1 == NULL) {
|
|
return;
|
|
}
|
|
|
|
// OPENSSL_ia32cap can contain zero, one or two values, separated with a ':'.
|
|
// Each value is a 64-bit, unsigned value which may start with "0x" to
|
|
// indicate a hex value. Prior to the 64-bit value, a '~' may be given.
|
|
//
|
|
// If '~' isn't present, then the value is taken as the result of the CPUID.
|
|
// Otherwise the value is inverted and ANDed with the probed CPUID result.
|
|
//
|
|
// The first value determines OPENSSL_ia32cap_P[0] and [1]. The second [2]
|
|
// and [3].
|
|
|
|
handle_cpu_env(&OPENSSL_ia32cap_P[0], env1);
|
|
env2 = strchr(env1, ':');
|
|
if (env2 != NULL) {
|
|
handle_cpu_env(&OPENSSL_ia32cap_P[2], env2 + 1);
|
|
}
|
|
}
|
|
|
|
#endif // !OPENSSL_NO_ASM && (OPENSSL_X86 || OPENSSL_X86_64)
|