729 lines
20 KiB
C
729 lines
20 KiB
C
/** @addtogroup spi_file SPI peripheral API
|
|
* @ingroup peripheral_apis
|
|
|
|
@author @htmlonly © @endhtmlonly 2009
|
|
Uwe Hermann <uwe@hermann-uwe.de>
|
|
@author @htmlonly © @endhtmlonly 2012
|
|
Ken Sarkies <ksarkies@internode.on.net>
|
|
|
|
Devices can have up to three SPI peripherals. The common 4-wire full-duplex
|
|
mode of operation is supported, along with 3-wire variants using unidirectional
|
|
communication modes or half-duplex bidirectional communication. A variety of
|
|
options allows many of the SPI variants to be supported. Multimaster operation
|
|
is also supported. A CRC can be generated and checked in hardware.
|
|
|
|
@note Some JTAG pins need to be remapped if SPI is to be used.
|
|
|
|
@note The I2S protocol shares the SPI hardware so the two protocols cannot be
|
|
used at the same time on the same peripheral.
|
|
|
|
Example: Clk/4, positive clock polarity, leading edge trigger, 8-bit words,
|
|
LSB first.
|
|
@code
|
|
spi_init_master(SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_4, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE,
|
|
SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_LSBFIRST);
|
|
spi_write(SPI1, 0x55); // 8-bit write
|
|
spi_write(SPI1, 0xaa88); // 16-bit write
|
|
reg8 = spi_read(SPI1); // 8-bit read
|
|
reg16 = spi_read(SPI1); // 16-bit read
|
|
@endcode
|
|
|
|
@todo need additional functions to aid ISRs in retrieving status
|
|
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/spi.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
|
|
/**@{*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Reset.
|
|
|
|
The SPI peripheral and all its associated configuration registers are placed in
|
|
the reset condition. The reset is effected via the RCC peripheral reset system.
|
|
|
|
@param[in] spi_peripheral Unsigned int32. SPI peripheral identifier @ref
|
|
spi_reg_base.
|
|
*/
|
|
|
|
void spi_reset(uint32_t spi_peripheral)
|
|
{ switch (spi_peripheral) {
|
|
#if defined(SPI1_BASE)
|
|
case SPI1_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI1);
|
|
break;
|
|
#endif
|
|
#if defined(SPI2_BASE)
|
|
case SPI2_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI2);
|
|
break;
|
|
#endif
|
|
#if defined(SPI3_BASE)
|
|
case SPI3_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI3);
|
|
break;
|
|
#endif
|
|
#if defined(SPI4_BASE)
|
|
case SPI4_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI4);
|
|
break;
|
|
#endif
|
|
#if defined(SPI5_BASE)
|
|
case SPI5_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI5);
|
|
break;
|
|
#endif
|
|
#if defined(SPI6_BASE)
|
|
case SPI6_BASE:
|
|
rcc_periph_reset_pulse(RST_SPI6);
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TODO: Error handling? */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable.
|
|
|
|
The SPI peripheral is enabled.
|
|
|
|
@todo Error handling?
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_SPE; /* Enable SPI. */
|
|
}
|
|
|
|
/* TODO: Error handling? */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable.
|
|
|
|
The SPI peripheral is disabled.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable(uint32_t spi)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = SPI_CR1(spi);
|
|
reg32 &= ~(SPI_CR1_SPE); /* Disable SPI. */
|
|
SPI_CR1(spi) = reg32;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Clean Disable.
|
|
|
|
Disable the SPI peripheral according to the procedure in section 23.3.8 of the
|
|
reference manual. This prevents corruption of any ongoing transfers and
|
|
prevents the BSY flag from becoming unreliable.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@returns data Unsigned int16. 8 or 16 bit data from final read.
|
|
*/
|
|
|
|
uint16_t spi_clean_disable(uint32_t spi)
|
|
{
|
|
/* Wait to receive last data */
|
|
while (!(SPI_SR(spi) & SPI_SR_RXNE));
|
|
|
|
uint16_t data = SPI_DR(spi);
|
|
|
|
/* Wait to transmit last data */
|
|
while (!(SPI_SR(spi) & SPI_SR_TXE));
|
|
|
|
/* Wait until not busy */
|
|
while (SPI_SR(spi) & SPI_SR_BSY);
|
|
|
|
SPI_CR1(spi) &= ~SPI_CR1_SPE;
|
|
|
|
return data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Data Write.
|
|
|
|
Data is written to the SPI interface.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] data Unsigned int16. 8 or 16 bit data to be written.
|
|
*/
|
|
|
|
void spi_write(uint32_t spi, uint16_t data)
|
|
{
|
|
/* Write data (8 or 16 bits, depending on DFF) into DR. */
|
|
SPI_DR(spi) = data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Data Write with Blocking.
|
|
|
|
Data is written to the SPI interface after the previous write transfer has
|
|
finished.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] data Unsigned int16. 8 or 16 bit data to be written.
|
|
*/
|
|
|
|
void spi_send(uint32_t spi, uint16_t data)
|
|
{
|
|
/* Wait for transfer finished. */
|
|
while (!(SPI_SR(spi) & SPI_SR_TXE));
|
|
|
|
/* Write data (8 or 16 bits, depending on DFF) into DR. */
|
|
SPI_DR(spi) = data;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Data Read.
|
|
|
|
Data is read from the SPI interface after the incoming transfer has finished.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@returns data Unsigned int16. 8 or 16 bit data.
|
|
*/
|
|
|
|
uint16_t spi_read(uint32_t spi)
|
|
{
|
|
/* Wait for transfer finished. */
|
|
while (!(SPI_SR(spi) & SPI_SR_RXNE));
|
|
|
|
/* Read the data (8 or 16 bits, depending on DFF bit) from DR. */
|
|
return SPI_DR(spi);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Data Write and Read Exchange.
|
|
|
|
Data is written to the SPI interface, then a read is done after the incoming
|
|
transfer has finished.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] data Unsigned int16. 8 or 16 bit data to be written.
|
|
@returns data Unsigned int16. 8 or 16 bit data.
|
|
*/
|
|
|
|
uint16_t spi_xfer(uint32_t spi, uint16_t data)
|
|
{
|
|
spi_write(spi, data);
|
|
|
|
/* Wait for transfer finished. */
|
|
while (!(SPI_SR(spi) & SPI_SR_RXNE));
|
|
|
|
/* Read the data (8 or 16 bits, depending on DFF bit) from DR. */
|
|
return SPI_DR(spi);
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Bidirectional Simplex Mode.
|
|
|
|
The SPI peripheral is set for bidirectional transfers in two-wire simplex mode
|
|
(using a clock wire and a bidirectional data wire).
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_bidirectional_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_BIDIMODE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Unidirectional Mode.
|
|
|
|
The SPI peripheral is set for unidirectional transfers. This is used in full
|
|
duplex mode or when the SPI is placed in two-wire simplex mode that uses a
|
|
clock wire and a unidirectional data wire.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_unidirectional_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_BIDIMODE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Bidirectional Simplex Receive Only Mode.
|
|
|
|
The SPI peripheral is set for bidirectional transfers in two-wire simplex mode
|
|
(using a clock wire and a bidirectional data wire), and is placed in a receive
|
|
state.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_bidirectional_receive_only_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_BIDIMODE;
|
|
SPI_CR1(spi) &= ~SPI_CR1_BIDIOE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Bidirectional Simplex Receive Only Mode.
|
|
|
|
The SPI peripheral is set for bidirectional transfers in two-wire simplex mode
|
|
(using a clock wire and a bidirectional data wire), and is placed in a transmit
|
|
state.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_bidirectional_transmit_only_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_BIDIMODE;
|
|
SPI_CR1(spi) |= SPI_CR1_BIDIOE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable the CRC.
|
|
|
|
The SPI peripheral is set to use a CRC field for transmit and receive.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_crc(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_CRCEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable the CRC.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_crc(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_CRCEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Next Transmit is a Data Word
|
|
|
|
The next transmission to take place is a data word from the transmit buffer.
|
|
This must be called before transmission to distinguish between sending
|
|
of a data or CRC word.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_next_tx_from_buffer(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_CRCNEXT;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Next Transmit is a CRC Word
|
|
|
|
The next transmission to take place is a crc word from the hardware crc unit.
|
|
This must be called before transmission to distinguish between sending
|
|
of a data or CRC word.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_next_tx_from_crc(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_CRCNEXT;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Full Duplex (3-wire) Mode
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_full_duplex_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_RXONLY;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Receive Only Mode for Simplex (2-wire) Unidirectional
|
|
Transfers
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_receive_only_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_RXONLY;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable Slave Management by Hardware
|
|
|
|
In slave mode the NSS hardware input is used as a select enable for the slave.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_software_slave_management(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_SSM;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable Slave Management by Software
|
|
|
|
In slave mode the NSS hardware input is replaced by an internal software
|
|
enable/disable of the slave (@ref spi_set_nss_high).
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_software_slave_management(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_SSM;
|
|
/* allow slave select to be an input */
|
|
SPI_CR2(spi) &= ~SPI_CR2_SSOE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Software NSS Signal High
|
|
|
|
In slave mode, and only when software slave management is used, this replaces
|
|
the NSS signal with a slave select enable signal.
|
|
|
|
@todo these should perhaps be combined with an SSM enable as it is meaningless
|
|
otherwise
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_nss_high(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_SSI;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Software NSS Signal Low
|
|
|
|
In slave mode, and only when software slave management is used, this replaces
|
|
the NSS signal with a slave select disable signal.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_nss_low(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_SSI;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set to Send LSB First
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_send_lsb_first(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_LSBFIRST;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set to Send MSB First
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_send_msb_first(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_LSBFIRST;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Baudrate Prescaler
|
|
|
|
@todo Why is this specification different to the spi_init_master baudrate
|
|
values?
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] baudrate Unsigned int8. Baudrate prescale value @ref spi_br_pre.
|
|
*/
|
|
|
|
void spi_set_baudrate_prescaler(uint32_t spi, uint8_t baudrate)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
if (baudrate > 7) {
|
|
return;
|
|
}
|
|
|
|
reg32 = (SPI_CR1(spi) & 0xffc7); /* Clear bits [5:3]. */
|
|
reg32 |= (baudrate << 3);
|
|
SPI_CR1(spi) = reg32;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set to Master Mode
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_master_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_MSTR;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set to Slave Mode
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_slave_mode(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_MSTR;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Clock Polarity to High when Idle
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@sa spi_set_clock_polarity_0
|
|
*/
|
|
|
|
void spi_set_clock_polarity_1(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_CPOL;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Clock Polarity to Low when Idle
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@sa spi_set_clock_polarity_1
|
|
*/
|
|
|
|
void spi_set_clock_polarity_0(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_CPOL;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Clock Phase to Capture on Trailing Edge
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@sa spi_set_clock_phase_0
|
|
*/
|
|
|
|
void spi_set_clock_phase_1(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_CPHA;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the Clock Phase to Capture on Leading Edge
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@sa spi_set_clock_phase_1
|
|
*/
|
|
|
|
void spi_set_clock_phase_0(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_CPHA;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable the Transmit Buffer Empty Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_tx_buffer_empty_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_TXEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable the Transmit Buffer Empty Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_tx_buffer_empty_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_TXEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable the Receive Buffer Ready Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_rx_buffer_not_empty_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_RXNEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable the Receive Buffer Ready Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_rx_buffer_not_empty_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_RXNEIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable the Error Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_error_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_ERRIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable the Error Interrupt
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_error_interrupt(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_ERRIE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the NSS Pin as an Output
|
|
|
|
Normally used in master mode to allows the master to place all devices on the
|
|
SPI bus into slave mode. Multimaster mode is not possible.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_ss_output(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_SSOE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set the NSS Pin as an Input
|
|
|
|
In master mode this allows the master to sense the presence of other masters. If
|
|
NSS is then pulled low the master is placed into slave mode. In slave mode NSS
|
|
becomes a slave enable.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_ss_output(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_SSOE;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable Transmit Transfers via DMA
|
|
|
|
This allows transmissions to proceed unattended using DMA to move data to the
|
|
transmit buffer as it becomes available. The DMA channels provided for each
|
|
SPI peripheral are given in the Technical Manual DMA section.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_tx_dma(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_TXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable Transmit Transfers via DMA
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_tx_dma(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_TXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Enable Receive Transfers via DMA
|
|
|
|
This allows received data streams to proceed unattended using DMA to move data
|
|
from the receive buffer as data becomes available. The DMA channels provided
|
|
for each SPI peripheral are given in the Technical Manual DMA section.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_enable_rx_dma(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) |= SPI_CR2_RXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Disable Receive Transfers via DMA
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_disable_rx_dma(uint32_t spi)
|
|
{
|
|
SPI_CR2(spi) &= ~SPI_CR2_RXDMAEN;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Standard Mode selection
|
|
@details Set SPI standard Modes
|
|
Mode | CPOL | CPHA
|
|
---- | ---- | ----
|
|
0 | 0 | 0
|
|
1 | 0 | 1
|
|
2 | 1 | 0
|
|
3 | 1 | 1
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] mode Unsigned int8. Standard SPI mode (0, 1, 2, 3)
|
|
@sa spi_set_clock_phase_0 spi_set_clock_phase_1
|
|
@sa spi_set_clock_polarity_0 spi_set_clock_polarity_1
|
|
*/
|
|
|
|
void spi_set_standard_mode(uint32_t spi, uint8_t mode)
|
|
{
|
|
if (mode > 3) {
|
|
return;
|
|
}
|
|
|
|
uint32_t reg32 = SPI_CR1(spi) & ~(SPI_CR1_CPOL | SPI_CR1_CPHA);
|
|
SPI_CR1(spi) = reg32 | mode;
|
|
}
|
|
|
|
/**@}*/
|