th5/tls_test.go

858 lines
22 KiB
Go
Raw Normal View History

// Copyright 2012 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package tls
import (
"bytes"
"crypto/x509"
"errors"
"fmt"
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
"io"
"io/ioutil"
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
"math"
"net"
"os"
"reflect"
"strings"
"testing"
"time"
)
var rsaCertPEM = `-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
`
var rsaKeyPEM = `-----BEGIN RSA PRIVATE KEY-----
MIIBOwIBAAJBANLJhPHhITqQbPklG3ibCVxwGMRfp/v4XqhfdQHdcVfHap6NQ5Wo
k/4xIA+ui35/MmNartNuC+BdZ1tMuVCPFZcCAwEAAQJAEJ2N+zsR0Xn8/Q6twa4G
6OB1M1WO+k+ztnX/1SvNeWu8D6GImtupLTYgjZcHufykj09jiHmjHx8u8ZZB/o1N
MQIhAPW+eyZo7ay3lMz1V01WVjNKK9QSn1MJlb06h/LuYv9FAiEA25WPedKgVyCW
SmUwbPw8fnTcpqDWE3yTO3vKcebqMSsCIBF3UmVue8YU3jybC3NxuXq3wNm34R8T
xVLHwDXh/6NJAiEAl2oHGGLz64BuAfjKrqwz7qMYr9HCLIe/YsoWq/olzScCIQDi
D2lWusoe2/nEqfDVVWGWlyJ7yOmqaVm/iNUN9B2N2g==
-----END RSA PRIVATE KEY-----
`
// keyPEM is the same as rsaKeyPEM, but declares itself as just
// "PRIVATE KEY", not "RSA PRIVATE KEY". https://golang.org/issue/4477
var keyPEM = `-----BEGIN PRIVATE KEY-----
MIIBOwIBAAJBANLJhPHhITqQbPklG3ibCVxwGMRfp/v4XqhfdQHdcVfHap6NQ5Wo
k/4xIA+ui35/MmNartNuC+BdZ1tMuVCPFZcCAwEAAQJAEJ2N+zsR0Xn8/Q6twa4G
6OB1M1WO+k+ztnX/1SvNeWu8D6GImtupLTYgjZcHufykj09jiHmjHx8u8ZZB/o1N
MQIhAPW+eyZo7ay3lMz1V01WVjNKK9QSn1MJlb06h/LuYv9FAiEA25WPedKgVyCW
SmUwbPw8fnTcpqDWE3yTO3vKcebqMSsCIBF3UmVue8YU3jybC3NxuXq3wNm34R8T
xVLHwDXh/6NJAiEAl2oHGGLz64BuAfjKrqwz7qMYr9HCLIe/YsoWq/olzScCIQDi
D2lWusoe2/nEqfDVVWGWlyJ7yOmqaVm/iNUN9B2N2g==
-----END PRIVATE KEY-----
`
var ecdsaCertPEM = `-----BEGIN CERTIFICATE-----
MIIB/jCCAWICCQDscdUxw16XFDAJBgcqhkjOPQQBMEUxCzAJBgNVBAYTAkFVMRMw
EQYDVQQIEwpTb21lLVN0YXRlMSEwHwYDVQQKExhJbnRlcm5ldCBXaWRnaXRzIFB0
eSBMdGQwHhcNMTIxMTE0MTI0MDQ4WhcNMTUxMTE0MTI0MDQ4WjBFMQswCQYDVQQG
EwJBVTETMBEGA1UECBMKU29tZS1TdGF0ZTEhMB8GA1UEChMYSW50ZXJuZXQgV2lk
Z2l0cyBQdHkgTHRkMIGbMBAGByqGSM49AgEGBSuBBAAjA4GGAAQBY9+my9OoeSUR
lDQdV/x8LsOuLilthhiS1Tz4aGDHIPwC1mlvnf7fg5lecYpMCrLLhauAc1UJXcgl
01xoLuzgtAEAgv2P/jgytzRSpUYvgLBt1UA0leLYBy6mQQbrNEuqT3INapKIcUv8
XxYP0xMEUksLPq6Ca+CRSqTtrd/23uTnapkwCQYHKoZIzj0EAQOBigAwgYYCQXJo
A7Sl2nLVf+4Iu/tAX/IF4MavARKC4PPHK3zfuGfPR3oCCcsAoz3kAzOeijvd0iXb
H5jBImIxPL4WxQNiBTexAkF8D1EtpYuWdlVQ80/h/f4pBcGiXPqX5h2PQSQY7hP1
+jwM1FGS4fREIOvlBYr/SzzQRtwrvrzGYxDEDbsC0ZGRnA==
-----END CERTIFICATE-----
`
var ecdsaKeyPEM = `-----BEGIN EC PARAMETERS-----
BgUrgQQAIw==
-----END EC PARAMETERS-----
-----BEGIN EC PRIVATE KEY-----
MIHcAgEBBEIBrsoKp0oqcv6/JovJJDoDVSGWdirrkgCWxrprGlzB9o0X8fV675X0
NwuBenXFfeZvVcwluO7/Q9wkYoPd/t3jGImgBwYFK4EEACOhgYkDgYYABAFj36bL
06h5JRGUNB1X/Hwuw64uKW2GGJLVPPhoYMcg/ALWaW+d/t+DmV5xikwKssuFq4Bz
VQldyCXTXGgu7OC0AQCC/Y/+ODK3NFKlRi+AsG3VQDSV4tgHLqZBBus0S6pPcg1q
kohxS/xfFg/TEwRSSws+roJr4JFKpO2t3/be5OdqmQ==
-----END EC PRIVATE KEY-----
`
var keyPairTests = []struct {
algo string
cert string
key string
}{
{"ECDSA", ecdsaCertPEM, ecdsaKeyPEM},
{"RSA", rsaCertPEM, rsaKeyPEM},
{"RSA-untyped", rsaCertPEM, keyPEM}, // golang.org/issue/4477
}
func TestX509KeyPair(t *testing.T) {
t.Parallel()
var pem []byte
for _, test := range keyPairTests {
pem = []byte(test.cert + test.key)
if _, err := X509KeyPair(pem, pem); err != nil {
t.Errorf("Failed to load %s cert followed by %s key: %s", test.algo, test.algo, err)
}
pem = []byte(test.key + test.cert)
if _, err := X509KeyPair(pem, pem); err != nil {
t.Errorf("Failed to load %s key followed by %s cert: %s", test.algo, test.algo, err)
}
}
}
func TestX509KeyPairErrors(t *testing.T) {
_, err := X509KeyPair([]byte(rsaKeyPEM), []byte(rsaCertPEM))
if err == nil {
t.Fatalf("X509KeyPair didn't return an error when arguments were switched")
}
if subStr := "been switched"; !strings.Contains(err.Error(), subStr) {
t.Fatalf("Expected %q in the error when switching arguments to X509KeyPair, but the error was %q", subStr, err)
}
_, err = X509KeyPair([]byte(rsaCertPEM), []byte(rsaCertPEM))
if err == nil {
t.Fatalf("X509KeyPair didn't return an error when both arguments were certificates")
}
if subStr := "certificate"; !strings.Contains(err.Error(), subStr) {
t.Fatalf("Expected %q in the error when both arguments to X509KeyPair were certificates, but the error was %q", subStr, err)
}
const nonsensePEM = `
-----BEGIN NONSENSE-----
Zm9vZm9vZm9v
-----END NONSENSE-----
`
_, err = X509KeyPair([]byte(nonsensePEM), []byte(nonsensePEM))
if err == nil {
t.Fatalf("X509KeyPair didn't return an error when both arguments were nonsense")
}
if subStr := "NONSENSE"; !strings.Contains(err.Error(), subStr) {
t.Fatalf("Expected %q in the error when both arguments to X509KeyPair were nonsense, but the error was %q", subStr, err)
}
}
func TestX509MixedKeyPair(t *testing.T) {
if _, err := X509KeyPair([]byte(rsaCertPEM), []byte(ecdsaKeyPEM)); err == nil {
t.Error("Load of RSA certificate succeeded with ECDSA private key")
}
if _, err := X509KeyPair([]byte(ecdsaCertPEM), []byte(rsaKeyPEM)); err == nil {
t.Error("Load of ECDSA certificate succeeded with RSA private key")
}
}
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
func newLocalListener(t testing.TB) net.Listener {
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
ln, err := net.Listen("tcp", "127.0.0.1:0")
if err != nil {
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
ln, err = net.Listen("tcp6", "[::1]:0")
}
if err != nil {
t.Fatal(err)
}
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
return ln
}
func TestDialTimeout(t *testing.T) {
if testing.Short() {
t.Skip("skipping in short mode")
}
listener := newLocalListener(t)
addr := listener.Addr().String()
defer listener.Close()
complete := make(chan bool)
defer close(complete)
go func() {
conn, err := listener.Accept()
if err != nil {
t.Error(err)
return
}
<-complete
conn.Close()
}()
dialer := &net.Dialer{
Timeout: 10 * time.Millisecond,
}
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
var err error
if _, err = DialWithDialer(dialer, "tcp", addr, nil); err == nil {
t.Fatal("DialWithTimeout completed successfully")
}
if !isTimeoutError(err) {
t.Errorf("resulting error not a timeout: %v\nType %T: %#v", err, err, err)
}
}
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
func isTimeoutError(err error) bool {
if ne, ok := err.(net.Error); ok {
return ne.Timeout()
}
return false
}
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
// tests that Conn.Read returns (non-zero, io.EOF) instead of
// (non-zero, nil) when a Close (alertCloseNotify) is sitting right
// behind the application data in the buffer.
func TestConnReadNonzeroAndEOF(t *testing.T) {
// This test is racy: it assumes that after a write to a
// localhost TCP connection, the peer TCP connection can
// immediately read it. Because it's racy, we skip this test
// in short mode, and then retry it several times with an
// increasing sleep in between our final write (via srv.Close
// below) and the following read.
if testing.Short() {
t.Skip("skipping in short mode")
}
var err error
for delay := time.Millisecond; delay <= 64*time.Millisecond; delay *= 2 {
if err = testConnReadNonzeroAndEOF(t, delay); err == nil {
return
}
}
t.Error(err)
}
func testConnReadNonzeroAndEOF(t *testing.T, delay time.Duration) error {
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
ln := newLocalListener(t)
defer ln.Close()
srvCh := make(chan *Conn, 1)
var serr error
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
go func() {
sconn, err := ln.Accept()
if err != nil {
serr = err
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
srvCh <- nil
return
}
serverConfig := testConfig.Clone()
srv := Server(sconn, serverConfig)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
if err := srv.Handshake(); err != nil {
serr = fmt.Errorf("handshake: %v", err)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
srvCh <- nil
return
}
srvCh <- srv
}()
clientConfig := testConfig.Clone()
conn, err := Dial("tcp", ln.Addr().String(), clientConfig)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
if err != nil {
t.Fatal(err)
}
defer conn.Close()
srv := <-srvCh
if srv == nil {
return serr
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
}
buf := make([]byte, 6)
srv.Write([]byte("foobar"))
n, err := conn.Read(buf)
if n != 6 || err != nil || string(buf) != "foobar" {
return fmt.Errorf("Read = %d, %v, data %q; want 6, nil, foobar", n, err, buf)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
}
srv.Write([]byte("abcdef"))
srv.Close()
time.Sleep(delay)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
n, err = conn.Read(buf)
if n != 6 || string(buf) != "abcdef" {
return fmt.Errorf("Read = %d, buf= %q; want 6, abcdef", n, buf)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
}
if err != io.EOF {
return fmt.Errorf("Second Read error = %v; want io.EOF", err)
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
}
return nil
crypto/tls: make Conn.Read return (n, io.EOF) when EOF is next in buffer Update #3514 An io.Reader is permitted to return either (n, nil) or (n, io.EOF) on EOF or other error. The tls package previously always returned (n, nil) for a read of size n if n bytes were available, not surfacing errors at the same time. Amazon's HTTPS frontends like to hang up on clients without sending the appropriate HTTP headers. (In their defense, they're allowed to hang up any time, but generally a server hangs up after a bit of inactivity, not immediately.) In any case, the Go HTTP client tries to re-use connections by looking at whether the response headers say to keep the connection open, and because the connection looks okay, under heavy load it's possible we'll reuse it immediately, writing the next request, just as the Transport's always-reading goroutine returns from tls.Conn.Read and sees (0, io.EOF). But because Amazon does send an AlertCloseNotify record before it hangs up on us, and the tls package does its own internal buffering (up to 1024 bytes) of pending data, we have the AlertCloseNotify in an unread buffer when our Conn.Read (to the HTTP Transport code) reads its final bit of data in the HTTP response body. This change makes that final Read return (n, io.EOF) when an AlertCloseNotify record is buffered right after, if we'd otherwise return (n, nil). A dependent change in the HTTP code then notes whether a client connection has seen an io.EOF and uses that as an additional signal to not reuse a HTTPS connection. With both changes, the majority of Amazon request failures go away. Without either one, 10-20 goroutines hitting the S3 API leads to such an error rate that empirically up to 5 retries are needed to complete an API call. LGTM=agl, rsc R=agl, rsc CC=golang-codereviews https://golang.org/cl/76400046
2014-03-25 17:58:35 +00:00
}
func TestTLSUniqueMatches(t *testing.T) {
ln := newLocalListener(t)
defer ln.Close()
serverTLSUniques := make(chan []byte)
go func() {
for i := 0; i < 2; i++ {
sconn, err := ln.Accept()
if err != nil {
t.Error(err)
return
}
serverConfig := testConfig.Clone()
srv := Server(sconn, serverConfig)
if err := srv.Handshake(); err != nil {
t.Error(err)
return
}
serverTLSUniques <- srv.ConnectionState().TLSUnique
}
}()
clientConfig := testConfig.Clone()
clientConfig.ClientSessionCache = NewLRUClientSessionCache(1)
conn, err := Dial("tcp", ln.Addr().String(), clientConfig)
if err != nil {
t.Fatal(err)
}
if !bytes.Equal(conn.ConnectionState().TLSUnique, <-serverTLSUniques) {
t.Error("client and server channel bindings differ")
}
conn.Close()
conn, err = Dial("tcp", ln.Addr().String(), clientConfig)
if err != nil {
t.Fatal(err)
}
defer conn.Close()
if !conn.ConnectionState().DidResume {
t.Error("second session did not use resumption")
}
if !bytes.Equal(conn.ConnectionState().TLSUnique, <-serverTLSUniques) {
t.Error("client and server channel bindings differ when session resumption is used")
}
}
func TestVerifyHostname(t *testing.T) {
c, err := Dial("tcp", "www.google.com:https", nil)
if err != nil {
t.Fatal(err)
}
if err := c.VerifyHostname("www.google.com"); err != nil {
t.Fatalf("verify www.google.com: %v", err)
}
if err := c.VerifyHostname("www.yahoo.com"); err == nil {
t.Fatalf("verify www.yahoo.com succeeded")
}
c, err = Dial("tcp", "www.google.com:https", &Config{InsecureSkipVerify: true})
if err != nil {
t.Fatal(err)
}
if err := c.VerifyHostname("www.google.com"); err == nil {
t.Fatalf("verify www.google.com succeeded with InsecureSkipVerify=true")
}
if err := c.VerifyHostname("www.yahoo.com"); err == nil {
t.Fatalf("verify www.google.com succeeded with InsecureSkipVerify=true")
}
}
func TestVerifyHostnameResumed(t *testing.T) {
config := &Config{
ClientSessionCache: NewLRUClientSessionCache(32),
}
for i := 0; i < 2; i++ {
c, err := Dial("tcp", "www.google.com:https", config)
if err != nil {
t.Fatalf("Dial #%d: %v", i, err)
}
cs := c.ConnectionState()
if i > 0 && !cs.DidResume {
t.Fatalf("Subsequent connection unexpectedly didn't resume")
}
if cs.VerifiedChains == nil {
t.Fatalf("Dial #%d: cs.VerifiedChains == nil", i)
}
if err := c.VerifyHostname("www.google.com"); err != nil {
t.Fatalf("verify www.google.com #%d: %v", i, err)
}
c.Close()
}
}
func TestConnCloseBreakingWrite(t *testing.T) {
ln := newLocalListener(t)
defer ln.Close()
srvCh := make(chan *Conn, 1)
var serr error
var sconn net.Conn
go func() {
var err error
sconn, err = ln.Accept()
if err != nil {
serr = err
srvCh <- nil
return
}
serverConfig := testConfig.Clone()
srv := Server(sconn, serverConfig)
if err := srv.Handshake(); err != nil {
serr = fmt.Errorf("handshake: %v", err)
srvCh <- nil
return
}
srvCh <- srv
}()
cconn, err := net.Dial("tcp", ln.Addr().String())
if err != nil {
t.Fatal(err)
}
defer cconn.Close()
conn := &changeImplConn{
Conn: cconn,
}
clientConfig := testConfig.Clone()
tconn := Client(conn, clientConfig)
if err := tconn.Handshake(); err != nil {
t.Fatal(err)
}
srv := <-srvCh
if srv == nil {
t.Fatal(serr)
}
defer sconn.Close()
connClosed := make(chan struct{})
conn.closeFunc = func() error {
close(connClosed)
return nil
}
inWrite := make(chan bool, 1)
var errConnClosed = errors.New("conn closed for test")
conn.writeFunc = func(p []byte) (n int, err error) {
inWrite <- true
<-connClosed
return 0, errConnClosed
}
closeReturned := make(chan bool, 1)
go func() {
<-inWrite
tconn.Close() // test that this doesn't block forever.
closeReturned <- true
}()
_, err = tconn.Write([]byte("foo"))
if err != errConnClosed {
t.Errorf("Write error = %v; want errConnClosed", err)
}
<-closeReturned
if err := tconn.Close(); err != errClosed {
t.Errorf("Close error = %v; want errClosed", err)
}
}
func TestConnCloseWrite(t *testing.T) {
ln := newLocalListener(t)
defer ln.Close()
clientDoneChan := make(chan struct{})
serverCloseWrite := func() error {
sconn, err := ln.Accept()
if err != nil {
return fmt.Errorf("accept: %v", err)
}
defer sconn.Close()
serverConfig := testConfig.Clone()
srv := Server(sconn, serverConfig)
if err := srv.Handshake(); err != nil {
return fmt.Errorf("handshake: %v", err)
}
defer srv.Close()
data, err := ioutil.ReadAll(srv)
if err != nil {
return err
}
if len(data) > 0 {
return fmt.Errorf("Read data = %q; want nothing", data)
}
if err := srv.CloseWrite(); err != nil {
return fmt.Errorf("server CloseWrite: %v", err)
}
// Wait for clientCloseWrite to finish, so we know we
// tested the CloseWrite before we defer the
// sconn.Close above, which would also cause the
// client to unblock like CloseWrite.
<-clientDoneChan
return nil
}
clientCloseWrite := func() error {
defer close(clientDoneChan)
clientConfig := testConfig.Clone()
conn, err := Dial("tcp", ln.Addr().String(), clientConfig)
if err != nil {
return err
}
if err := conn.Handshake(); err != nil {
return err
}
defer conn.Close()
if err := conn.CloseWrite(); err != nil {
return fmt.Errorf("client CloseWrite: %v", err)
}
if _, err := conn.Write([]byte{0}); err != errShutdown {
return fmt.Errorf("CloseWrite error = %v; want errShutdown", err)
}
data, err := ioutil.ReadAll(conn)
if err != nil {
return err
}
if len(data) > 0 {
return fmt.Errorf("Read data = %q; want nothing", data)
}
return nil
}
errChan := make(chan error, 2)
go func() { errChan <- serverCloseWrite() }()
go func() { errChan <- clientCloseWrite() }()
for i := 0; i < 2; i++ {
select {
case err := <-errChan:
if err != nil {
t.Fatal(err)
}
case <-time.After(10 * time.Second):
t.Fatal("deadlock")
}
}
// Also test CloseWrite being called before the handshake is
// finished:
{
ln2 := newLocalListener(t)
defer ln2.Close()
netConn, err := net.Dial("tcp", ln2.Addr().String())
if err != nil {
t.Fatal(err)
}
defer netConn.Close()
conn := Client(netConn, testConfig.Clone())
if err := conn.CloseWrite(); err != errEarlyCloseWrite {
t.Errorf("CloseWrite error = %v; want errEarlyCloseWrite", err)
}
}
}
func TestCloneFuncFields(t *testing.T) {
const expectedCount = 5
called := 0
c1 := Config{
Time: func() time.Time {
called |= 1 << 0
return time.Time{}
},
GetCertificate: func(*ClientHelloInfo) (*Certificate, error) {
called |= 1 << 1
return nil, nil
},
GetClientCertificate: func(*CertificateRequestInfo) (*Certificate, error) {
called |= 1 << 2
return nil, nil
},
GetConfigForClient: func(*ClientHelloInfo) (*Config, error) {
called |= 1 << 3
return nil, nil
},
VerifyPeerCertificate: func(rawCerts [][]byte, verifiedChains [][]*x509.Certificate) error {
called |= 1 << 4
return nil
},
}
c2 := c1.Clone()
c2.Time()
c2.GetCertificate(nil)
c2.GetClientCertificate(nil)
c2.GetConfigForClient(nil)
c2.VerifyPeerCertificate(nil, nil)
if called != (1<<expectedCount)-1 {
t.Fatalf("expected %d calls but saw calls %b", expectedCount, called)
}
}
func TestCloneNonFuncFields(t *testing.T) {
var c1 Config
v := reflect.ValueOf(&c1).Elem()
typ := v.Type()
for i := 0; i < typ.NumField(); i++ {
f := v.Field(i)
if !f.CanSet() {
// unexported field; not cloned.
continue
}
// testing/quick can't handle functions or interfaces and so
// isn't used here.
switch fn := typ.Field(i).Name; fn {
case "Rand":
f.Set(reflect.ValueOf(io.Reader(os.Stdin)))
case "Time", "GetCertificate", "GetConfigForClient", "VerifyPeerCertificate", "GetClientCertificate":
// DeepEqual can't compare functions. If you add a
// function field to this list, you must also change
// TestCloneFuncFields to ensure that the func field is
// cloned.
case "Certificates":
f.Set(reflect.ValueOf([]Certificate{
{Certificate: [][]byte{{'b'}}},
}))
case "NameToCertificate":
f.Set(reflect.ValueOf(map[string]*Certificate{"a": nil}))
case "RootCAs", "ClientCAs":
f.Set(reflect.ValueOf(x509.NewCertPool()))
case "ClientSessionCache":
f.Set(reflect.ValueOf(NewLRUClientSessionCache(10)))
case "KeyLogWriter":
f.Set(reflect.ValueOf(io.Writer(os.Stdout)))
case "NextProtos":
f.Set(reflect.ValueOf([]string{"a", "b"}))
case "ServerName":
f.Set(reflect.ValueOf("b"))
case "ClientAuth":
f.Set(reflect.ValueOf(VerifyClientCertIfGiven))
case "InsecureSkipVerify", "SessionTicketsDisabled", "DynamicRecordSizingDisabled", "PreferServerCipherSuites", "Accept0RTTData":
f.Set(reflect.ValueOf(true))
case "MinVersion", "MaxVersion":
f.Set(reflect.ValueOf(uint16(VersionTLS12)))
case "SessionTicketKey":
f.Set(reflect.ValueOf([32]byte{}))
case "CipherSuites":
case "TLS13CipherSuites":
f.Set(reflect.ValueOf([]uint16{1, 2}))
case "CurvePreferences":
f.Set(reflect.ValueOf([]CurveID{CurveP256}))
case "Renegotiation":
f.Set(reflect.ValueOf(RenegotiateOnceAsClient))
case "Max0RTTDataSize":
f.Set(reflect.ValueOf(uint32(0)))
2017-02-22 21:56:04 +00:00
case "SessionTicketSealer":
// TODO
default:
t.Errorf("all fields must be accounted for, but saw unknown field %q", fn)
}
}
c2 := c1.Clone()
// DeepEqual also compares unexported fields, thus c2 needs to have run
// serverInit in order to be DeepEqual to c1. Cloning it and discarding
// the result is sufficient.
c2.Clone()
if !reflect.DeepEqual(&c1, c2) {
t.Errorf("clone failed to copy a field")
}
}
// changeImplConn is a net.Conn which can change its Write and Close
// methods.
type changeImplConn struct {
net.Conn
writeFunc func([]byte) (int, error)
closeFunc func() error
}
func (w *changeImplConn) Write(p []byte) (n int, err error) {
if w.writeFunc != nil {
return w.writeFunc(p)
}
return w.Conn.Write(p)
}
func (w *changeImplConn) Close() error {
if w.closeFunc != nil {
return w.closeFunc()
}
return w.Conn.Close()
}
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
func throughput(b *testing.B, totalBytes int64, dynamicRecordSizingDisabled bool) {
ln := newLocalListener(b)
defer ln.Close()
N := b.N
// Less than 64KB because Windows appears to use a TCP rwin < 64KB.
// See Issue #15899.
const bufsize = 32 << 10
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
go func() {
buf := make([]byte, bufsize)
for i := 0; i < N; i++ {
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
sconn, err := ln.Accept()
if err != nil {
// panic rather than synchronize to avoid benchmark overhead
// (cannot call b.Fatal in goroutine)
panic(fmt.Errorf("accept: %v", err))
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
}
serverConfig := testConfig.Clone()
serverConfig.CipherSuites = nil // the defaults may prefer faster ciphers
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
serverConfig.DynamicRecordSizingDisabled = dynamicRecordSizingDisabled
srv := Server(sconn, serverConfig)
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
if err := srv.Handshake(); err != nil {
panic(fmt.Errorf("handshake: %v", err))
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
}
if _, err := io.CopyBuffer(srv, srv, buf); err != nil {
panic(fmt.Errorf("copy buffer: %v", err))
}
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
}
}()
b.SetBytes(totalBytes)
clientConfig := testConfig.Clone()
clientConfig.CipherSuites = nil // the defaults may prefer faster ciphers
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
clientConfig.DynamicRecordSizingDisabled = dynamicRecordSizingDisabled
buf := make([]byte, bufsize)
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
chunks := int(math.Ceil(float64(totalBytes) / float64(len(buf))))
for i := 0; i < N; i++ {
conn, err := Dial("tcp", ln.Addr().String(), clientConfig)
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
if err != nil {
b.Fatal(err)
}
for j := 0; j < chunks; j++ {
_, err := conn.Write(buf)
if err != nil {
b.Fatal(err)
}
_, err = io.ReadFull(conn, buf)
if err != nil {
b.Fatal(err)
}
}
conn.Close()
}
}
func BenchmarkThroughput(b *testing.B) {
for _, mode := range []string{"Max", "Dynamic"} {
for size := 1; size <= 64; size <<= 1 {
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
name := fmt.Sprintf("%sPacket/%dMB", mode, size)
b.Run(name, func(b *testing.B) {
throughput(b, int64(size<<20), mode == "Max")
})
}
}
}
type slowConn struct {
net.Conn
bps int
}
func (c *slowConn) Write(p []byte) (int, error) {
if c.bps == 0 {
panic("too slow")
}
t0 := time.Now()
wrote := 0
for wrote < len(p) {
time.Sleep(100 * time.Microsecond)
allowed := int(time.Since(t0).Seconds()*float64(c.bps)) / 8
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
if allowed > len(p) {
allowed = len(p)
}
if wrote < allowed {
n, err := c.Conn.Write(p[wrote:allowed])
wrote += n
if err != nil {
return wrote, err
}
}
}
return len(p), nil
}
func latency(b *testing.B, bps int, dynamicRecordSizingDisabled bool) {
ln := newLocalListener(b)
defer ln.Close()
N := b.N
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
go func() {
for i := 0; i < N; i++ {
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
sconn, err := ln.Accept()
if err != nil {
// panic rather than synchronize to avoid benchmark overhead
// (cannot call b.Fatal in goroutine)
panic(fmt.Errorf("accept: %v", err))
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
}
serverConfig := testConfig.Clone()
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
serverConfig.DynamicRecordSizingDisabled = dynamicRecordSizingDisabled
srv := Server(&slowConn{sconn, bps}, serverConfig)
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
if err := srv.Handshake(); err != nil {
panic(fmt.Errorf("handshake: %v", err))
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
}
io.Copy(srv, srv)
}
}()
clientConfig := testConfig.Clone()
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
clientConfig.DynamicRecordSizingDisabled = dynamicRecordSizingDisabled
buf := make([]byte, 16384)
peek := make([]byte, 1)
for i := 0; i < N; i++ {
conn, err := Dial("tcp", ln.Addr().String(), clientConfig)
crypto/tls: adjust dynamic record sizes to grow arithmetically The current code, introduced after Go 1.6 to improve latency on low-bandwidth connections, sends 1 kB packets until 1 MB has been sent, and then sends 16 kB packets (the maximum record size). Unfortunately this decreases throughput for 1-16 MB responses by 20% or so. Following discussion on #15713, change cutoff to 128 kB sent and also grow the size allowed for successive packets: 1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB. This fixes the throughput problems: the overhead is now closer to 2%. I hope this still helps with latency but I don't have a great way to test it. At the least, it's not worse than Go 1.6. Comparing MaxPacket vs DynamicPacket benchmarks: name maxpkt time/op dyn. time/op delta Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16) Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16) Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16) Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18) Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20) Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20) Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7) The small MB runs are bimodal in both cases, probably GC pauses. But there's clearly no general slowdown anymore. Fixes #15713. Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382 Reviewed-on: https://go-review.googlesource.com/23487 Reviewed-by: Ian Lance Taylor <iant@golang.org>
2016-05-27 14:50:06 +01:00
if err != nil {
b.Fatal(err)
}
// make sure we're connected and previous connection has stopped
if _, err := conn.Write(buf[:1]); err != nil {
b.Fatal(err)
}
if _, err := io.ReadFull(conn, peek); err != nil {
b.Fatal(err)
}
if _, err := conn.Write(buf); err != nil {
b.Fatal(err)
}
if _, err = io.ReadFull(conn, peek); err != nil {
b.Fatal(err)
}
conn.Close()
}
}
func BenchmarkLatency(b *testing.B) {
for _, mode := range []string{"Max", "Dynamic"} {
for _, kbps := range []int{200, 500, 1000, 2000, 5000} {
name := fmt.Sprintf("%sPacket/%dkbps", mode, kbps)
b.Run(name, func(b *testing.B) {
latency(b, kbps*1000, mode == "Max")
})
}
}
}