Prior to TLS 1.2, the handshake had a pleasing property that one could
incrementally hash it and, from that, get the needed hashes for both
the CertificateVerify and Finished messages.
TLS 1.2 introduced negotiation for the signature and hash and it became
possible for the handshake hash to be, say, SHA-384, but for the
CertificateVerify to sign the handshake with SHA-1. The problem is that
one doesn't know in advance which hashes will be needed and thus the
handshake needs to be buffered.
Go ignored this, always kept a single handshake hash, and any signatures
over the handshake had to use that hash.
However, there are a set of servers that inspect the client's offered
signature hash functions and will abort the handshake if one of the
server's certificates is signed with a hash function outside of that
set. https://robertsspaceindustries.com/ is an example of such a server.
Clearly not a lot of thought happened when that server code was written,
but its out there and we have to deal with it.
This change decouples the handshake hash from the CertificateVerify
hash. This lays the groundwork for advertising support for SHA-384 but
doesn't actually make that change in the interests of reviewability.
Updating the advertised hash functions will cause changes in many of the
testdata/ files and some errors might get lost in the noise. This change
only needs to update four testdata/ files: one because a SHA-384-based
handshake is now being signed with SHA-256 and the others because the
TLS 1.2 CertificateRequest message now includes SHA-1.
This change also has the effect of adding support for
client-certificates in SSLv3 servers. However, SSLv3 is now disabled by
default so this should be moot.
It would be possible to avoid much of this change and just support
SHA-384 for the ServerKeyExchange as the SKX only signs over the nonces
and SKX params (a design mistake in TLS). However, that would leave Go
in the odd situation where it advertised support for SHA-384, but would
only use the handshake hash when signing client certificates. I fear
that'll just cause problems in the future.
Much of this code was written by davidben@ for the purposes of testing
BoringSSL.
Partly addresses #9757
Change-Id: I5137a472b6076812af387a5a69fc62c7373cd485
Reviewed-on: https://go-review.googlesource.com/9415
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Generalizes PRF calculation for TLS 1.2 to support arbitrary hashes (SHA-384 instead of SHA-256).
Testdata were all updated to correspond with the new cipher suites in the handshake.
Change-Id: I3d9fc48c19d1043899e38255a53c80dc952ee08f
Reviewed-on: https://go-review.googlesource.com/3265
Reviewed-by: Adam Langley <agl@golang.org>
A new attack on CBC padding in SSLv3 was released yesterday[1]. Go only
supports SSLv3 as a server, not as a client. An easy fix is to change
the default minimum version to TLS 1.0 but that seems a little much
this late in the 1.4 process as it may break some things.
Thus this patch adds server support for TLS_FALLBACK_SCSV[2] -- a
mechanism for solving the fallback problem overall. Chrome has
implemented this since February and Google has urged others to do so in
light of yesterday's news.
With this change, clients can indicate that they are doing a fallback
connection and Go servers will be able to correctly reject them.
[1] http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
[2] https://tools.ietf.org/html/draft-ietf-tls-downgrade-scsv-00
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/157090043
AES-GCM cipher suites are only defined for TLS 1.2, although there's
nothing really version specific about them. However, development
versions of NSS (meaning Firefox and Chrome) have an issue where
they'll advertise TLS 1.2-only cipher suites in a TLS 1.1 ClientHello
but then balk when the server selects one.
This change causes Go clients not to advertise TLS 1.2 cipher suites
unless TLS 1.2 is being used, and prevents servers from selecting them
unless TLS 1.2 has been negotiated.
https://code.google.com/p/chromium/issues/detail?id=297151https://bugzilla.mozilla.org/show_bug.cgi?id=919677
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/13573047
47ec7a68b1a2 added support for ECDSA ciphersuites but didn't alter the
cipher suite selection to take that into account. Thus Go servers could
try and select an ECDSA cipher suite while only having an RSA
certificate, leading to connection failures.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/13239053
AES-GCM is the only current TLS ciphersuite that doesn't have
cryptographic weaknesses (RC4), nor major construction issues (CBC mode
ciphers) and has some deployment (i.e. not-CCM).
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/13249044
Add support for ECDHE-ECDSA (RFC4492), which uses an ephemeral server
key pair to perform ECDH with ECDSA signatures. Like ECDHE-RSA,
ECDHE-ECDSA also provides PFS.
R=agl
CC=golang-dev
https://golang.org/cl/7006047
This does not include AES-GCM yet. Also, it assumes that the handshake and
certificate signature hash are always SHA-256, which is true of the ciphersuites
that we currently support.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10762044
TLS clients send ciphersuites in preference order (most prefereable
first). This change alters the order so that ECDHE comes before plain
RSA, and RC4 comes before AES (because of the Lucky13 attack).
This is unlikely to have much effect: as a server, the code uses the
client's ciphersuite order by default and, as a client, the non-Go
server probably imposes its order.
R=golang-dev, r, raggi, jsing
CC=golang-dev
https://golang.org/cl/10372045
The significant change between TLS 1.0 and 1.1 is the addition of an explicit IV in the case of CBC encrypted records. Support for TLS 1.1 is needed in order to support TLS 1.2.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/7880043
When SNI based certificate selection is enabled, we previously used
the default private key even if we selected a non-default certificate.
Fixes#3367.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/5987058
Remove NewMD5, NewSHA1 and NewSHA256 in favor of using New and
explicitly importing the used hash-function. This way when using, for
example, HMAC with RIPEMD there's no md5, sha1 and sha256 linked in
through the hmac package.
A gofix rule is included, and applied to the standard library (3 files
altered).
This change is the result of a discussion at
https://golang.org/cl/5550043/ to pull the discussion about
deprecating these functions out of that issue.
R=golang-dev, agl
CC=golang-dev, r, rsc
https://golang.org/cl/5556058
The code in hash functions themselves could write directly into the
output buffer for a savings of about 50ns. But it's a little ugly so I
wasted a copy.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5440111
This is the result of running `gofix -r hashsum` over the tree, changing
the hash function implementations by hand and then fixing a couple of
instances where gofix didn't catch something.
The changed implementations are as simple as possible while still
working: I'm not trying to optimise in this CL.
R=rsc, cw, rogpeppe
CC=golang-dev
https://golang.org/cl/5448065
Previously we were using the map iteration order to set the order of
the cipher suites in the ClientHello.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5440048
The following ciphersuites are added:
TLS_RSA_WITH_3DES_EDE_CBC_SHA
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
This change helps conform to the TLS1.1 standard because
the first ciphersuite is "mandatory" in RFC4346
R=golang-dev, agl, rsc
CC=golang-dev
https://golang.org/cl/5164042
It would be nice not to have to support this since all the clients
that we care about support TLSv1 by now. However, due to buggy
implementations of SSLv3 on the Internet which can't do version
negotiation correctly, browsers will sometimes switch to SSLv3. Since
there's no good way for a browser tell a network problem from a buggy
server, this downgrade can occur even if the server in question is
actually working correctly.
So we need to support SSLv3 for robustness :(
Fixes#1703.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5018045
This is largely based on ality's CL 2747042.
crypto/rc4: API break in order to conform to crypto/cipher's
Stream interface
cipher/cipher: promote to the default build
Since CBC differs between TLS 1.0 and 1.1, we downgrade and
support only 1.0 at the current time. 1.0 is what most of the
world uses.
Given this CL, it would be trival to add support for AES 256,
SHA 256 etc, but I haven't in order to keep the change smaller.
R=rsc
CC=ality, golang-dev
https://golang.org/cl/3659041
Adam Langley
Jacob H. Haven
Joel Sing
Benjamin Black
Luit van Drongelen
Russ Cox
Louis Kruger