Previously we enforced both that the extended key usages of a client
certificate chain allowed for client authentication, and that the
client-auth EKU was in the leaf certificate.
This change removes the latter requirement. It's still the case that the
chain must be compatible with the client-auth EKU (i.e. that a parent
certificate isn't limited to another usage, like S/MIME), but we'll now
accept a leaf certificate with no EKUs for client-auth.
While it would be nice if all client certificates were explicit in their
intended purpose, I no longer feel that this battle is worthwhile.
Fixes#11087.
Change-Id: I777e695101cbeba069b730163533e2977f4dc1fc
Reviewed-on: https://go-review.googlesource.com/10806
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This is the second in a two-part change. See https://golang.org/cl/9415
for details of the overall change.
This change updates the supported signature algorithms to include
SHA-384 and updates all the testdata/ files accordingly. Even some of
the testdata/ files named “TLS1.0” and “TLS1.1” have been updated
because they have TLS 1.2 ClientHello's even though the server picks a
lower version.
Fixes#9757.
Change-Id: Ia76de2b548d3b39cd4aa3f71132b0da7c917debd
Reviewed-on: https://go-review.googlesource.com/9472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Prior to TLS 1.2, the handshake had a pleasing property that one could
incrementally hash it and, from that, get the needed hashes for both
the CertificateVerify and Finished messages.
TLS 1.2 introduced negotiation for the signature and hash and it became
possible for the handshake hash to be, say, SHA-384, but for the
CertificateVerify to sign the handshake with SHA-1. The problem is that
one doesn't know in advance which hashes will be needed and thus the
handshake needs to be buffered.
Go ignored this, always kept a single handshake hash, and any signatures
over the handshake had to use that hash.
However, there are a set of servers that inspect the client's offered
signature hash functions and will abort the handshake if one of the
server's certificates is signed with a hash function outside of that
set. https://robertsspaceindustries.com/ is an example of such a server.
Clearly not a lot of thought happened when that server code was written,
but its out there and we have to deal with it.
This change decouples the handshake hash from the CertificateVerify
hash. This lays the groundwork for advertising support for SHA-384 but
doesn't actually make that change in the interests of reviewability.
Updating the advertised hash functions will cause changes in many of the
testdata/ files and some errors might get lost in the noise. This change
only needs to update four testdata/ files: one because a SHA-384-based
handshake is now being signed with SHA-256 and the others because the
TLS 1.2 CertificateRequest message now includes SHA-1.
This change also has the effect of adding support for
client-certificates in SSLv3 servers. However, SSLv3 is now disabled by
default so this should be moot.
It would be possible to avoid much of this change and just support
SHA-384 for the ServerKeyExchange as the SKX only signs over the nonces
and SKX params (a design mistake in TLS). However, that would leave Go
in the odd situation where it advertised support for SHA-384, but would
only use the handshake hash when signing client certificates. I fear
that'll just cause problems in the future.
Much of this code was written by davidben@ for the purposes of testing
BoringSSL.
Partly addresses #9757
Change-Id: I5137a472b6076812af387a5a69fc62c7373cd485
Reviewed-on: https://go-review.googlesource.com/9415
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change causes the GetCertificate callback to be called if
Certificates is empty. Previously this configuration would result in an
error.
This allows people to have servers that depend entirely on dynamic
certificate selection, even when the client doesn't send SNI.
Fixes#9208.
Change-Id: I2f5a5551215958b88b154c64a114590300dfc461
Reviewed-on: https://go-review.googlesource.com/8792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
The OCSP response is currently only exposed via a method on Conn,
which makes it inaccessible when using wrappers like net/http. The
ConnectionState structure is typically available even when using
wrappers and contains many of the other handshake details, so this
change exposes the stapled OCSP response in that structure.
Change-Id: If8dab49292566912c615d816321b4353e711f71f
Reviewed-on: https://go-review.googlesource.com/9361
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This change adds a new method to tls.Config, SetSessionTicketKeys, that
changes the key used to encrypt session tickets while the server is
running. Additional keys may be provided that will be used to maintain
continuity while rotating keys. If a ticket encrypted with an old key is
provided by the client, the server will resume the session and provide
the client with a ticket encrypted using the new key.
Fixes#9994
Change-Id: Idbc16b10ff39616109a51ed39a6fa208faad5b4e
Reviewed-on: https://go-review.googlesource.com/9072
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
- Multiple GetCertificate tests shared the same name and were
overwriting each other, each test now has a unique name.
- expectAlert was not implemented in the data updater, the single
test that used it has been replaced with a ClientHello failure
test.
Fixes#10470
Change-Id: I500738f6302ffa863d7ee45d85fa8773155e0614
Reviewed-on: https://go-review.googlesource.com/8959
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This is a follow on to 28f33b4a which removes one of the boolean flags
and adds a test for the key-driven cipher selection.
Change-Id: If2a400de807eb19110352912a9f467491cc8986c
Reviewed-on: https://go-review.googlesource.com/8428
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Jacob Haven <jacob@cloudflare.com>
This change replaces all direct ECDSA/RSA sign and decrypt operations
with calls through the crypto.Signer and crypto.Decrypter interfaces.
This is a follow-up to https://go-review.googlesource.com/#/c/3900/
which added crypto.Decrypter and implemented it for RSA.
Change-Id: Ie0f3928448b285f329efcd3a93ca3fd5e3b3e42d
Reviewed-on: https://go-review.googlesource.com/7804
Reviewed-by: Adam Langley <agl@golang.org>
Commit 604fa4d5 made TLS 1.0 the default minimum version. This commit
amends a comment to reflect that.
This is where the default is used in the absence of an explicit version
being set:
edadffa2f3/src/crypto/tls/common.go (L391-L393)
Change-Id: I8f1117ecdddc85bb1cc76a6834026505a380b793
Reviewed-on: https://go-review.googlesource.com/5525
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Just so that we notice in the future if another hash function is added
without updating this utility function, make it panic when passed an
unknown handshake hash function. (Which should never happen.)
Change-Id: I60a6fc01669441523d8c44e8fbe7ed435e7f04c8
Reviewed-on: https://go-review.googlesource.com/7646
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Joël Stemmer <stemmertech@gmail.com>
Commit f1d669aee9 added support for
AES_256_GCM_SHA384 cipher suites as specified in RFC5289. However, it
did not take the arbitrary hash function into account in the TLS client
handshake when using client certificates.
The hashForClientCertificate method always returned SHA256 as its
hashing function, even if it actually used a different one to calculate
its digest. Setting up the connection would eventually fail with the
error "tls: failed to sign handshake with client certificate:
crypto/rsa: input must be hashed message".
Included is an additional test for this specific situation that uses the
SHA384 hash.
Fixes#9808
Change-Id: Iccbf4ab225633471ef897907c208ad31f92855a3
Reviewed-on: https://go-review.googlesource.com/7040
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Some servers which misunderstood the point of the CertificateRequest
message send huge reply records. These records are large enough that
they were considered “insane” by the TLS code and rejected.
This change removes the sanity test for record lengths. Although the
maxCiphertext test still remains, just above, which (roughly) enforces
the 16KB protocol limit on record sizes:
https://tools.ietf.org/html/rfc5246#section-6.2.1Fixes#8928.
Change-Id: Idf89a2561b1947325b7ddc2613dc2da638d7d1c9
Reviewed-on: https://go-review.googlesource.com/5690
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Only documentation / comment changes. Update references to
point to golang.org permalinks or go.googlesource.com/go.
References in historical release notes under doc are left as is.
Change-Id: Icfc14e4998723e2c2d48f9877a91c5abef6794ea
Reviewed-on: https://go-review.googlesource.com/4060
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generalizes PRF calculation for TLS 1.2 to support arbitrary hashes (SHA-384 instead of SHA-256).
Testdata were all updated to correspond with the new cipher suites in the handshake.
Change-Id: I3d9fc48c19d1043899e38255a53c80dc952ee08f
Reviewed-on: https://go-review.googlesource.com/3265
Reviewed-by: Adam Langley <agl@golang.org>
ECDSA is unsafe to use if an entropy source produces predictable
output for the ephemeral nonces. E.g., [Nguyen]. A simple
countermeasure is to hash the secret key, the message, and
entropy together to seed a CSPRNG, from which the ephemeral key
is derived.
Fixes#9452
--
This is a minimalist (in terms of patch size) solution, though
not the most parsimonious in its use of primitives:
- csprng_key = ChopMD-256(SHA2-512(priv.D||entropy||hash))
- reader = AES-256-CTR(k=csprng_key)
This, however, provides at most 128-bit collision-resistance,
so that Adv will have a term related to the number of messages
signed that is significantly worse than plain ECDSA. This does
not seem to be of any practical importance.
ChopMD-256(SHA2-512(x)) is used, rather than SHA2-256(x), for
two sets of reasons:
*Practical:* SHA2-512 has a larger state and 16 more rounds; it
is likely non-generically stronger than SHA2-256. And, AFAIK,
cryptanalysis backs this up. (E.g., [Biryukov] gives a
distinguisher on 47-round SHA2-256 with cost < 2^85.) This is
well below a reasonable security-strength target.
*Theoretical:* [Coron] and [Chang] show that Chop-MD(F(x)) is
indifferentiable from a random oracle for slightly beyond the
birthday barrier. It seems likely that this makes a generic
security proof that this construction remains UF-CMA is
possible in the indifferentiability framework.
--
Many thanks to Payman Mohassel for reviewing this construction;
any mistakes are mine, however. And, as he notes, reusing the
private key in this way means that the generic-group (non-RO)
proof of ECDSA's security given in [Brown] no longer directly
applies.
--
[Brown]: http://www.cacr.math.uwaterloo.ca/techreports/2000/corr2000-54.ps
"Brown. The exact security of ECDSA. 2000"
[Coron]: https://www.cs.nyu.edu/~puniya/papers/merkle.pdf
"Coron et al. Merkle-Damgard revisited. 2005"
[Chang]: https://www.iacr.org/archive/fse2008/50860436/50860436.pdf
"Chang and Nandi. Improved indifferentiability security analysis
of chopMD hash function. 2008"
[Biryukov]: http://www.iacr.org/archive/asiacrypt2011/70730269/70730269.pdf
"Biryukov et al. Second-order differential collisions for reduced
SHA-256. 2011"
[Nguyen]: ftp://ftp.di.ens.fr/pub/users/pnguyen/PubECDSA.ps
"Nguyen and Shparlinski. The insecurity of the elliptic curve
digital signature algorithm with partially known nonces. 2003"
New tests:
TestNonceSafety: Check that signatures are safe even with a
broken entropy source.
TestINDCCA: Check that signatures remain non-deterministic
with a functional entropy source.
Updated "golden" KATs in crypto/tls/testdata that use ECDSA suites.
Change-Id: I55337a2fbec2e42a36ce719bd2184793682d678a
Reviewed-on: https://go-review.googlesource.com/3340
Reviewed-by: Adam Langley <agl@golang.org>
There are two methods by which TLS clients signal the renegotiation
extension: either a special cipher suite value or a TLS extension.
It appears that I left debugging code in when I landed support for the
extension because there's a "+ 1" in the switch statement that shouldn't
be there.
The effect of this is very small, but it will break Firefox if
security.ssl.require_safe_negotiation is enabled in about:config.
(Although almost nobody does this.)
This change fixes the original bug and adds a test. Sadly the test is a
little complex because there's no OpenSSL s_client option that mirrors
that behaviour of require_safe_negotiation.
Change-Id: Ia6925c7d9bbc0713e7104228a57d2d61d537c07a
Reviewed-on: https://go-review.googlesource.com/1900
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
SSLv3 (the old minimum) is still supported and can be enabled via the
tls.Config, but this change increases the default minimum version to TLS
1.0. This is now common practice in light of the POODLE[1] attack
against SSLv3's CBC padding format.
[1] https://www.imperialviolet.org/2014/10/14/poodle.htmlFixes#9364.
Change-Id: Ibae6666ee038ceee0cb18c339c393155928c6510
Reviewed-on: https://go-review.googlesource.com/1791
Reviewed-by: Minux Ma <minux@golang.org>
Fix TLS_FALLBACK_SCSV check when comparing the client version to the
default max version. This enables the TLS_FALLBACK_SCSV check by default
in servers that do not explicitly set a max version in the tls config.
Change-Id: I5a51f9da6d71b79bc6c2ba45032be51d0f704b5e
Reviewed-on: https://go-review.googlesource.com/1776
Reviewed-by: Adam Langley <agl@golang.org>
A new attack on CBC padding in SSLv3 was released yesterday[1]. Go only
supports SSLv3 as a server, not as a client. An easy fix is to change
the default minimum version to TLS 1.0 but that seems a little much
this late in the 1.4 process as it may break some things.
Thus this patch adds server support for TLS_FALLBACK_SCSV[2] -- a
mechanism for solving the fallback problem overall. Chrome has
implemented this since February and Google has urged others to do so in
light of yesterday's news.
With this change, clients can indicate that they are doing a fallback
connection and Go servers will be able to correctly reject them.
[1] http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
[2] https://tools.ietf.org/html/draft-ietf-tls-downgrade-scsv-00
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/157090043
Signer is an interface to support opaque private keys.
These keys typically result from being kept in special hardware
(i.e. a TPM) although sometimes operating systems provide a
similar interface using process isolation for security rather
than hardware boundaries.
This changes provides interfaces for representing them and
alters crypto/tls so that client certificates can use
opaque keys.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews, jdeprez
https://golang.org/cl/114680043
This change causes a TLS client and server to verify that received
elliptic curve points are on the expected curve. This isn't actually
necessary in the Go TLS stack, but Watson Ladd has convinced me that
it's worthwhile because it's pretty cheap and it removes the
possibility that some change in the future (e.g. tls-unique) will
depend on it without the author checking that precondition.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/115290046
Where the spelling changed from British to
US norm (e.g., optimise -> optimize) it follows
the style in that file.
LGTM=adonovan
R=golang-codereviews, adonovan
CC=golang-codereviews
https://golang.org/cl/96980043
Update #3514
An io.Reader is permitted to return either (n, nil)
or (n, io.EOF) on EOF or other error.
The tls package previously always returned (n, nil) for a read
of size n if n bytes were available, not surfacing errors at
the same time.
Amazon's HTTPS frontends like to hang up on clients without
sending the appropriate HTTP headers. (In their defense,
they're allowed to hang up any time, but generally a server
hangs up after a bit of inactivity, not immediately.) In any
case, the Go HTTP client tries to re-use connections by
looking at whether the response headers say to keep the
connection open, and because the connection looks okay, under
heavy load it's possible we'll reuse it immediately, writing
the next request, just as the Transport's always-reading
goroutine returns from tls.Conn.Read and sees (0, io.EOF).
But because Amazon does send an AlertCloseNotify record before
it hangs up on us, and the tls package does its own internal
buffering (up to 1024 bytes) of pending data, we have the
AlertCloseNotify in an unread buffer when our Conn.Read (to
the HTTP Transport code) reads its final bit of data in the
HTTP response body.
This change makes that final Read return (n, io.EOF) when
an AlertCloseNotify record is buffered right after, if we'd
otherwise return (n, nil).
A dependent change in the HTTP code then notes whether a
client connection has seen an io.EOF and uses that as an
additional signal to not reuse a HTTPS connection. With both
changes, the majority of Amazon request failures go
away. Without either one, 10-20 goroutines hitting the S3 API
leads to such an error rate that empirically up to 5 retries
are needed to complete an API call.
LGTM=agl, rsc
R=agl, rsc
CC=golang-codereviews
https://golang.org/cl/76400046
Currently a write error will cause future reads to return that same error.
However, there may have been extra information from a peer pending on
the read direction that is now unavailable.
This change splits the single connErr into errors for the read, write and
handshake. (Splitting off the handshake error is needed because both read
and write paths check the handshake error.)
Fixes#7414.
LGTM=bradfitz, r
R=golang-codereviews, r, bradfitz
CC=golang-codereviews
https://golang.org/cl/69090044
While reviewing uses of the lower-level Client API in code, I found
that in many cases, code was using Client only because it needed a
timeout on the connection. DialWithDialer allows a timeout (and
other values) to be specified without resorting to the low-level API.
LGTM=r
R=golang-codereviews, r, bradfitz
CC=golang-codereviews
https://golang.org/cl/68920045
Currently an ECDHE handshake uses the client's curve preference. This
generally means that we use P-521. However, P-521's strength is
mismatched with the rest of the cipher suite in most cases and we have
a fast, constant-time implementation of P-256.
With this change, Go servers will use P-256 where the client supports
it although that can be overridden in the Config.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/66060043
crypto/tls has two functions for creating a client connection: Dial,
which most users are expected to use, and Client, which is the
lower-level API.
Dial does what you expect: it gives you a secure connection to the host
that you specify and the majority of users of crypto/tls appear to work
fine with it.
Client gives more control but needs more care. Specifically, if it
wasn't given a server name in the tls.Config then it didn't check that
the server's certificates match any hostname - because it doesn't have
one to check against. It was assumed that users of the low-level API
call VerifyHostname on the certificate themselves if they didn't supply
a hostname.
A review of the uses of Client both within Google and in a couple of
external libraries has shown that nearly all of them got this wrong.
Thus, this change enforces that either a ServerName or
InsecureSkipVerify is given. This does not affect tls.Dial.
See discussion at https://groups.google.com/d/msg/golang-nuts/4vnt7NdLvVU/b1SJ4u0ikb0J.
Fixes#7342.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/67010043
Users of the low-level, Client function are frequenctly missing the
fact that, unless they pass a ServerName to the TLS connection then it
cannot verify the certificates against any name.
This change makes it clear that at least one of InsecureSkipVerify and
ServerName should always be set.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/65440043
Adam Langley
Jonathan Rudenberg
Jacob H. Haven
Matt Bostock
Josh Bleecher Snyder
Joël Stemmer
Péter Surányi
David Leon Gil
Brad Fitzpatrick
Ben Burkert
Russ Cox
Andres Erbsen
Percy Wegmann
Asim Shankar
Robert Griesemer
Robert Hencke