This is the second in a two-part change. See https://golang.org/cl/9415
for details of the overall change.
This change updates the supported signature algorithms to include
SHA-384 and updates all the testdata/ files accordingly. Even some of
the testdata/ files named “TLS1.0” and “TLS1.1” have been updated
because they have TLS 1.2 ClientHello's even though the server picks a
lower version.
Fixes#9757.
Change-Id: Ia76de2b548d3b39cd4aa3f71132b0da7c917debd
Reviewed-on: https://go-review.googlesource.com/9472
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Prior to TLS 1.2, the handshake had a pleasing property that one could
incrementally hash it and, from that, get the needed hashes for both
the CertificateVerify and Finished messages.
TLS 1.2 introduced negotiation for the signature and hash and it became
possible for the handshake hash to be, say, SHA-384, but for the
CertificateVerify to sign the handshake with SHA-1. The problem is that
one doesn't know in advance which hashes will be needed and thus the
handshake needs to be buffered.
Go ignored this, always kept a single handshake hash, and any signatures
over the handshake had to use that hash.
However, there are a set of servers that inspect the client's offered
signature hash functions and will abort the handshake if one of the
server's certificates is signed with a hash function outside of that
set. https://robertsspaceindustries.com/ is an example of such a server.
Clearly not a lot of thought happened when that server code was written,
but its out there and we have to deal with it.
This change decouples the handshake hash from the CertificateVerify
hash. This lays the groundwork for advertising support for SHA-384 but
doesn't actually make that change in the interests of reviewability.
Updating the advertised hash functions will cause changes in many of the
testdata/ files and some errors might get lost in the noise. This change
only needs to update four testdata/ files: one because a SHA-384-based
handshake is now being signed with SHA-256 and the others because the
TLS 1.2 CertificateRequest message now includes SHA-1.
This change also has the effect of adding support for
client-certificates in SSLv3 servers. However, SSLv3 is now disabled by
default so this should be moot.
It would be possible to avoid much of this change and just support
SHA-384 for the ServerKeyExchange as the SKX only signs over the nonces
and SKX params (a design mistake in TLS). However, that would leave Go
in the odd situation where it advertised support for SHA-384, but would
only use the handshake hash when signing client certificates. I fear
that'll just cause problems in the future.
Much of this code was written by davidben@ for the purposes of testing
BoringSSL.
Partly addresses #9757
Change-Id: I5137a472b6076812af387a5a69fc62c7373cd485
Reviewed-on: https://go-review.googlesource.com/9415
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change causes the GetCertificate callback to be called if
Certificates is empty. Previously this configuration would result in an
error.
This allows people to have servers that depend entirely on dynamic
certificate selection, even when the client doesn't send SNI.
Fixes#9208.
Change-Id: I2f5a5551215958b88b154c64a114590300dfc461
Reviewed-on: https://go-review.googlesource.com/8792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
The OCSP response is currently only exposed via a method on Conn,
which makes it inaccessible when using wrappers like net/http. The
ConnectionState structure is typically available even when using
wrappers and contains many of the other handshake details, so this
change exposes the stapled OCSP response in that structure.
Change-Id: If8dab49292566912c615d816321b4353e711f71f
Reviewed-on: https://go-review.googlesource.com/9361
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This change adds a new method to tls.Config, SetSessionTicketKeys, that
changes the key used to encrypt session tickets while the server is
running. Additional keys may be provided that will be used to maintain
continuity while rotating keys. If a ticket encrypted with an old key is
provided by the client, the server will resume the session and provide
the client with a ticket encrypted using the new key.
Fixes#9994
Change-Id: Idbc16b10ff39616109a51ed39a6fa208faad5b4e
Reviewed-on: https://go-review.googlesource.com/9072
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
This is a follow on to 28f33b4a which removes one of the boolean flags
and adds a test for the key-driven cipher selection.
Change-Id: If2a400de807eb19110352912a9f467491cc8986c
Reviewed-on: https://go-review.googlesource.com/8428
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Jacob Haven <jacob@cloudflare.com>
This change replaces all direct ECDSA/RSA sign and decrypt operations
with calls through the crypto.Signer and crypto.Decrypter interfaces.
This is a follow-up to https://go-review.googlesource.com/#/c/3900/
which added crypto.Decrypter and implemented it for RSA.
Change-Id: Ie0f3928448b285f329efcd3a93ca3fd5e3b3e42d
Reviewed-on: https://go-review.googlesource.com/7804
Reviewed-by: Adam Langley <agl@golang.org>
Commit 604fa4d5 made TLS 1.0 the default minimum version. This commit
amends a comment to reflect that.
This is where the default is used in the absence of an explicit version
being set:
edadffa2f3/src/crypto/tls/common.go (L391-L393)
Change-Id: I8f1117ecdddc85bb1cc76a6834026505a380b793
Reviewed-on: https://go-review.googlesource.com/5525
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Commit f1d669aee994b28e1afcfe974680565932d25b70 added support for
AES_256_GCM_SHA384 cipher suites as specified in RFC5289. However, it
did not take the arbitrary hash function into account in the TLS client
handshake when using client certificates.
The hashForClientCertificate method always returned SHA256 as its
hashing function, even if it actually used a different one to calculate
its digest. Setting up the connection would eventually fail with the
error "tls: failed to sign handshake with client certificate:
crypto/rsa: input must be hashed message".
Included is an additional test for this specific situation that uses the
SHA384 hash.
Fixes#9808
Change-Id: Iccbf4ab225633471ef897907c208ad31f92855a3
Reviewed-on: https://go-review.googlesource.com/7040
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
SSLv3 (the old minimum) is still supported and can be enabled via the
tls.Config, but this change increases the default minimum version to TLS
1.0. This is now common practice in light of the POODLE[1] attack
against SSLv3's CBC padding format.
[1] https://www.imperialviolet.org/2014/10/14/poodle.htmlFixes#9364.
Change-Id: Ibae6666ee038ceee0cb18c339c393155928c6510
Reviewed-on: https://go-review.googlesource.com/1791
Reviewed-by: Minux Ma <minux@golang.org>
Signer is an interface to support opaque private keys.
These keys typically result from being kept in special hardware
(i.e. a TPM) although sometimes operating systems provide a
similar interface using process isolation for security rather
than hardware boundaries.
This changes provides interfaces for representing them and
alters crypto/tls so that client certificates can use
opaque keys.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews, jdeprez
https://golang.org/cl/114680043
Currently an ECDHE handshake uses the client's curve preference. This
generally means that we use P-521. However, P-521's strength is
mismatched with the rest of the cipher suite in most cases and we have
a fast, constant-time implementation of P-256.
With this change, Go servers will use P-256 where the client supports
it although that can be overridden in the Config.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/66060043
Users of the low-level, Client function are frequenctly missing the
fact that, unless they pass a ServerName to the TLS connection then it
cannot verify the certificates against any name.
This change makes it clear that at least one of InsecureSkipVerify and
ServerName should always be set.
LGTM=bradfitz
R=golang-codereviews, bradfitz
CC=golang-codereviews
https://golang.org/cl/65440043
Adam (agl@) had already done an initial review of this CL in a branch.
Added ClientSessionState to Config which now allows clients to keep state
required to resume a TLS session with a server. A client handshake will try
and use the SessionTicket/MasterSecret in this cached state if the server
acknowledged resumption.
We also added support to cache ClientSessionState object in Config that will
be looked up by server remote address during the handshake.
R=golang-codereviews, agl, rsc, agl, agl, bradfitz, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/15680043
The renegotiation extension was introduced[1] due to an attack by Ray in
which a client's handshake was spliced into a connection that was
renegotiating, thus giving an attacker the ability to inject an
arbitary prefix into the connection.
Go has never supported renegotiation as a server and so this attack
doesn't apply. As a client, it's possible that at some point in the
future the population of servers will be sufficiently updated that
it'll be possible to reject connections where the server hasn't
demonstrated that it has been updated to address this problem.
We're not at that point yet, but it's good for Go servers to support
the extension so that it might be possible to do in the future.
[1] https://tools.ietf.org/search/rfc5746
R=golang-codereviews, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/48580043
Despite SHA256 support being required for TLS 1.2 handshakes, some
servers are aborting handshakes that don't offer SHA1 support.
This change adds support for signing TLS 1.2 ServerKeyExchange messages
with SHA1. It does not add support for signing TLS 1.2 client
certificates with SHA1 as that would require the handshake to be
buffered.
Fixes#6618.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/15650043
Add support for ECDHE-ECDSA (RFC4492), which uses an ephemeral server
key pair to perform ECDH with ECDSA signatures. Like ECDHE-RSA,
ECDHE-ECDSA also provides PFS.
R=agl
CC=golang-dev
https://golang.org/cl/7006047
This does not include AES-GCM yet. Also, it assumes that the handshake and
certificate signature hash are always SHA-256, which is true of the ciphersuites
that we currently support.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10762044
The significant change between TLS 1.0 and 1.1 is the addition of an explicit IV in the case of CBC encrypted records. Support for TLS 1.1 is needed in order to support TLS 1.2.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/7880043
Previously, Go TLS servers always took the client's preferences into
account when selecting a ciphersuite. This change adds the option of
using the server's preferences, which can be expressed by setting
tls.Config.CipherSuites.
This mirrors Apache's SSLHonorCipherOrder directive.
R=golang-dev, nightlyone, bradfitz, ality
CC=golang-dev
https://golang.org/cl/7163043
Session resumption saves a round trip and removes the need to perform
the public-key operations of a TLS handshake when both the client and
server support it (which is true of Firefox and Chrome, at least).
R=golang-dev, bradfitz, rsc
CC=golang-dev
https://golang.org/cl/6555051
This moves the various CA root fetchers from crypto/tls into crypto/x509.
The move was brought about by issue 2997. Windows doesn't ship with all
its root certificates, but will instead download them as-needed when using
CryptoAPI for certificate verification.
This CL changes crypto/x509 to verify a certificate using the system root
CAs when VerifyOptions.RootCAs == nil. On Windows, this verification is
now implemented using Windows's CryptoAPI. All other root fetchers are
unchanged, and still use Go's own verification code.
The CL also fixes the hostname matching logic in crypto/tls/tls.go, in
order to be able to test whether hostname mismatches are honored by the
Windows verification code.
The move to crypto/x509 also allows other packages to use the OS-provided
root certificates, instead of hiding them inside the crypto/tls package.
Fixes#2997.
R=agl, golang-dev, alex.brainman, rsc, mikkel
CC=golang-dev
https://golang.org/cl/5700087
Fix incorrect marshal/unmarshal of certificateRequest.
Add support for configuring client-auth on the server side.
Fix the certificate selection in the client side.
Update generate_cert.go to new time package
Fixes#2521.
R=krautz, agl, bradfitz
CC=golang-dev, mikkel
https://golang.org/cl/5448093
We still very much assume it in the code, but with this change in
place we can implement other things later without changing and users
of the package.
Fixes#2319.
R=golang-dev, bradfitz, r
CC=golang-dev
https://golang.org/cl/5489073
Previously we were using the map iteration order to set the order of
the cipher suites in the ClientHello.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5440048
With this in place, a TLS server is capable of selecting the correct
certificate based on the client's ServerNameIndication extension.
The need to call Config.BuildNameToCertificate is unfortunate, but
adding a sync.Once to the Config structure made it uncopyable and I
felt that was too high a price to pay. Parsing the leaf certificates
in each handshake was too inefficient to consider.
R=bradfitz, rsc
CC=golang-dev
https://golang.org/cl/5151048
It would be nice not to have to support this since all the clients
that we care about support TLSv1 by now. However, due to buggy
implementations of SSLv3 on the Internet which can't do version
negotiation correctly, browsers will sometimes switch to SSLv3. Since
there's no good way for a browser tell a network problem from a buggy
server, this downgrade can occur even if the server in question is
actually working correctly.
So we need to support SSLv3 for robustness :(
Fixes#1703.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5018045
People have a need to verify certificates in situations other than TLS
client handshaking. Thus this CL moves certificate verification into
x509 and expands its abilities.
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4407046
We already had support on the client side. I also changed the name of
the flag in the ServerHello structure to match the name of the same
flag in the ClientHello (ocspStapling).
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4408044
This is largely based on ality's CL 2747042.
crypto/rc4: API break in order to conform to crypto/cipher's
Stream interface
cipher/cipher: promote to the default build
Since CBC differs between TLS 1.0 and 1.1, we downgrade and
support only 1.0 at the current time. 1.0 is what most of the
world uses.
Given this CL, it would be trival to add support for AES 256,
SHA 256 etc, but I haven't in order to keep the change smaller.
R=rsc
CC=ality, golang-dev
https://golang.org/cl/3659041
