To allow clients to advertise both TLS 1.2 and TLS 1.3 cipher suites,
remove the distinction between both suites. TLS 1.3 suites are now
always included in the default cipher list (and the client will send it
if MaxVersion allows for it).
Since TLS 1.3 is expected to become the default MaxVersion and
applications might have set only TLS 1.2 cipher suites in their
configuration, TLS 1.3 cipher suites are added when none are present.
Alternatively, I considered disallowing overriding the TLS 1.3 suites,
but that requires more complexity and has not much benefits. Provide a
mechanism and do not dictate policy, application developers might want
to fix a cipher suite for testing other implementations for example.
Fixes https://github.com/cloudflare/tls-tris/pull/22
I opted for adding a separate TLS13CipherSuites field to the Config
because library users that did not set Config.MaxVersion are
supposed to get TLS 1.3 support automatically, like it has been for
HTTP/2, but having set CipherSuites would effectively disable it.
Updates #9671
Change-Id: I26a2776b68374d6f5ee45629da09f9494fe723ad
Opening the 1.3 dances with the record layer because it has been the
most stable through the drafts, has the least dependencies, and has been
tricky in my experience.
Note that the record layer version check is entirely removed according
to https://tools.ietf.org/html/draft-ietf-tls-tls13-18#appendix-C.2.
A test that happened to hit that check (but was not made to test for it)
has changed to the next error in the stack.
There are no 1.3 tests at the moment, and I suspect they will all have to
wait for the patch cycle to reach interoperability.
Using > / <= VersionTLS13 for all conditionals to transparently support
draft versions and hypotetical future versions.
See https://tools.ietf.org/html/draft-ietf-tls-tls13-18#section-5.
Updates #9671
Change-Id: I97f0a59439728f194a1c50b48cff041469a0f00b
SNI values may not include a trailing dot according to
https://tools.ietf.org/html/rfc6066#section-3. Although crypto/tls
handled this correctly as a client, it didn't reject this as a server.
This change makes sending an SNI value with a trailing dot a fatal
error.
Updates #18114.
Change-Id: Ib7897ab40e98d4a7a4646ff8469a55233621f631
Reviewed-on: https://go-review.googlesource.com/33904
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I used the slowtests.go tool as described in
https://golang.org/cl/32684 on packages that stood out.
go test -short std drops from ~56 to ~52 seconds.
This isn't a huge win, but it was mostly an exercise.
Updates #17751
Change-Id: I9f3402e36a038d71e662d06ce2c1d52f6c4b674d
Reviewed-on: https://go-review.googlesource.com/32751
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change enables the ChaCha20-Poly1305 cipher suites by default. This
changes the default ClientHello and thus requires updating all the
tests.
Change-Id: I6683a2647caaff4a11f9e932babb6f07912cad94
Reviewed-on: https://go-review.googlesource.com/30958
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
GetConfigForClient allows the tls.Config to be updated on a per-client
basis.
Fixes#16066.
Fixes#15707.
Fixes#15699.
Change-Id: I2c675a443d557f969441226729f98502b38901ea
Reviewed-on: https://go-review.googlesource.com/30790
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for the ChaCha20-Poly1305 AEAD to crypto/tls,
as specified in https://tools.ietf.org/html/rfc7905.
Fixes#15499.
Change-Id: Iaa689be90e03f208c40b574eca399e56f3c7ecf1
Reviewed-on: https://go-review.googlesource.com/30957
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
X25519 (RFC 7748) is now commonly used for key agreement in TLS
connections, as specified in
https://tools.ietf.org/html/draft-ietf-tls-curve25519-01.
This change adds support for that in crypto/tls, but does not enabled it
by default so that there's less test noise. A future change will enable
it by default and will update all the test data at the same time.
Change-Id: I91802ecd776d73aae5c65bcb653d12e23c413ed4
Reviewed-on: https://go-review.googlesource.com/30824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We will need OpenSSL 1.1.0 in order to test some of the features
expected for Go 1.8. However, 1.1.0 also disables (by default) some
things that we still want to test, such as RC4, 3DES and SSLv3. Thus
developers wanting to update the crypto/tls test data will need to build
OpenSSL from source.
This change updates the test data with transcripts generated by 1.1.0
(in order to reduce future diffs) and also causes a banner to be printed
if 1.1.0 is not used when updating.
(The test for an ALPN mismatch is removed because OpenSSL now terminates
the connection with a fatal alert if no known ALPN protocols are
offered. There's no point testing against this because it's an OpenSSL
behaviour.)
Change-Id: I957516975e0b8c7def84184f65c81d0b68f1c551
Reviewed-on: https://go-review.googlesource.com/30821
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since there's no aspect of key logging that OpenSSL can check for us,
the tests for it might as well just connect to another goroutine as this
is lower-maintainance.
Change-Id: I746d1dbad1b4bbfc8ef6ccf136ee4824dbda021e
Reviewed-on: https://go-review.googlesource.com/30089
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joonas Kuorilehto <joneskoo@derbian.fi>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In Go 1.0, the Config struct consisted only of exported fields.
In Go 1.1, it started to grow private, uncopyable fields (sync.Once,
sync.Mutex, etc).
Ever since, people have been writing their own private Config.Clone
methods, or risking it and doing a language-level shallow copy and
copying the unexported sync variables.
Clean this up and export the Config.clone method as Config.Clone.
This matches the convention of Template.Clone from text/template and
html/template at least.
Fixes#15771
Updates #16228 (needs update in x/net/http2 before fixed)
Updates #16492 (not sure whether @agl wants to do more)
Change-Id: I48c2825d4fef55a75d2f99640a7079c56fce39ca
Reviewed-on: https://go-review.googlesource.com/28075
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Add support for writing TLS client random and master secret
in NSS key log format.
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Normally this is enabled by a developer debugging TLS based
applications, especially HTTP/2, by setting the KeyLogWriter
to an open file. The keys negotiated in handshake are then
logged and can be used to decrypt TLS sessions e.g. in Wireshark.
Applications may choose to add support similar to NSS where this
is enabled by environment variable, but no such mechanism is
built in to Go. Instead each application must explicitly enable.
Fixes#13057.
Change-Id: If6edd2d58999903e8390b1674ba4257ecc747ae1
Reviewed-on: https://go-review.googlesource.com/27434
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The RFC is clear that the Parameters in an AlgorithmIdentifer for an RSA
public key must be NULL. BoringSSL enforces this so we have strong
evidence that this is a widely compatible change.
Embarrassingly enough, the major source of violations of this is us. Go
used to get this correct in only one of two places. This was only fixed
in 2013 (with 4874bc9b). That's why lots of test certificates are
updated in this change.
Fixes#16166.
Change-Id: Ib9a4551349354c66e730d44eb8cee4ec402ea8ab
Reviewed-on: https://go-review.googlesource.com/27312
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Moves the state.ServerName assignment to outside the if
statement that checks for handshakeComplete.
Fixes#15571
Change-Id: I6c4131ddb16389aed1c410a975f9aa3b52816965
Reviewed-on: https://go-review.googlesource.com/22862
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This fixes some 40 warnings from go vet.
Fixes#16134.
Change-Id: Ib9fcba275fe692f027a2a07b581c8cf503b11087
Reviewed-on: https://go-review.googlesource.com/24287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Instead, decline the session and do a full handshake. The semantics of
cross-version resume are unclear, and all major client implementations
treat this as a fatal error. (This doesn't come up very much, mostly if
the client does the browser version fallback without sharding the
session cache.)
See BoringSSL's bdf5e72f50 and OpenSSL's
9e189b9dc1.
Change-Id: I51ca95ac1691870dd0c148fd967739e2d4f58824
Reviewed-on: https://go-review.googlesource.com/21152
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This promotes a connection hang during TLS handshake to a proper error.
This doesn't fully address #14539 because the error reported in that
case is a write-on-socket-not-connected error, which implies that an
earlier error during connection setup is not being checked, but it is
an improvement over the current behaviour.
Updates #14539.
Change-Id: I0571a752d32d5303db48149ab448226868b19495
Reviewed-on: https://go-review.googlesource.com/19990
Reviewed-by: Adam Langley <agl@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is minor cleanup that reduces test output noise.
Change-Id: Ib6db4daf8cb67b7784b2d5b222fa37c7f78a6a04
Reviewed-on: https://go-review.googlesource.com/19997
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is minor cleanup that makes the tests more readable.
Change-Id: I9f1f98f0f035096c284bdf3501e7520517a3e4d9
Reviewed-on: https://go-review.googlesource.com/19993
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Could go in 1.5, although not critical.
See also #12107
Change-Id: I7f1608b58581d21df4db58f0db654fef79e33a90
Reviewed-on: https://go-review.googlesource.com/13481
Reviewed-by: Dave Cheney <dave@cheney.net>
This change alters the certificate used in many tests so that it's no
longer self-signed. This allows some tests to exercise the standard
certificate verification paths in the future.
Change-Id: I9c3fcd6847eed8269ff3b86d9b6966406bf0642d
Reviewed-on: https://go-review.googlesource.com/13244
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change causes the GetCertificate callback to be called if
Certificates is empty. Previously this configuration would result in an
error.
This allows people to have servers that depend entirely on dynamic
certificate selection, even when the client doesn't send SNI.
Fixes#9208.
Change-Id: I2f5a5551215958b88b154c64a114590300dfc461
Reviewed-on: https://go-review.googlesource.com/8792
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
- Multiple GetCertificate tests shared the same name and were
overwriting each other, each test now has a unique name.
- expectAlert was not implemented in the data updater, the single
test that used it has been replaced with a ClientHello failure
test.
Fixes#10470
Change-Id: I500738f6302ffa863d7ee45d85fa8773155e0614
Reviewed-on: https://go-review.googlesource.com/8959
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
This is a follow on to 28f33b4a which removes one of the boolean flags
and adds a test for the key-driven cipher selection.
Change-Id: If2a400de807eb19110352912a9f467491cc8986c
Reviewed-on: https://go-review.googlesource.com/8428
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Jacob Haven <jacob@cloudflare.com>
Generalizes PRF calculation for TLS 1.2 to support arbitrary hashes (SHA-384 instead of SHA-256).
Testdata were all updated to correspond with the new cipher suites in the handshake.
Change-Id: I3d9fc48c19d1043899e38255a53c80dc952ee08f
Reviewed-on: https://go-review.googlesource.com/3265
Reviewed-by: Adam Langley <agl@golang.org>
There are two methods by which TLS clients signal the renegotiation
extension: either a special cipher suite value or a TLS extension.
It appears that I left debugging code in when I landed support for the
extension because there's a "+ 1" in the switch statement that shouldn't
be there.
The effect of this is very small, but it will break Firefox if
security.ssl.require_safe_negotiation is enabled in about:config.
(Although almost nobody does this.)
This change fixes the original bug and adds a test. Sadly the test is a
little complex because there's no OpenSSL s_client option that mirrors
that behaviour of require_safe_negotiation.
Change-Id: Ia6925c7d9bbc0713e7104228a57d2d61d537c07a
Reviewed-on: https://go-review.googlesource.com/1900
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fix TLS_FALLBACK_SCSV check when comparing the client version to the
default max version. This enables the TLS_FALLBACK_SCSV check by default
in servers that do not explicitly set a max version in the tls config.
Change-Id: I5a51f9da6d71b79bc6c2ba45032be51d0f704b5e
Reviewed-on: https://go-review.googlesource.com/1776
Reviewed-by: Adam Langley <agl@golang.org>
A new attack on CBC padding in SSLv3 was released yesterday[1]. Go only
supports SSLv3 as a server, not as a client. An easy fix is to change
the default minimum version to TLS 1.0 but that seems a little much
this late in the 1.4 process as it may break some things.
Thus this patch adds server support for TLS_FALLBACK_SCSV[2] -- a
mechanism for solving the fallback problem overall. Chrome has
implemented this since February and Google has urged others to do so in
light of yesterday's news.
With this change, clients can indicate that they are doing a fallback
connection and Go servers will be able to correctly reject them.
[1] http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
[2] https://tools.ietf.org/html/draft-ietf-tls-downgrade-scsv-00
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/157090043
Currently an ECDHE handshake uses the client's curve preference. This
generally means that we use P-521. However, P-521's strength is
mismatched with the rest of the cipher suite in most cases and we have
a fast, constant-time implementation of P-256.
With this change, Go servers will use P-256 where the client supports
it although that can be overridden in the Config.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/66060043
Adam (agl@) had already done an initial review of this CL in a branch.
Added ClientSessionState to Config which now allows clients to keep state
required to resume a TLS session with a server. A client handshake will try
and use the SessionTicket/MasterSecret in this cached state if the server
acknowledged resumption.
We also added support to cache ClientSessionState object in Config that will
be looked up by server remote address during the handshake.
R=golang-codereviews, agl, rsc, agl, agl, bradfitz, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/15680043
The renegotiation extension was introduced[1] due to an attack by Ray in
which a client's handshake was spliced into a connection that was
renegotiating, thus giving an attacker the ability to inject an
arbitary prefix into the connection.
Go has never supported renegotiation as a server and so this attack
doesn't apply. As a client, it's possible that at some point in the
future the population of servers will be sufficiently updated that
it'll be possible to reject connections where the server hasn't
demonstrated that it has been updated to address this problem.
We're not at that point yet, but it's good for Go servers to support
the extension so that it might be possible to do in the future.
[1] https://tools.ietf.org/search/rfc5746
R=golang-codereviews, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/48580043
Henry D. Case
Peter Wu
Tomas Susanka
Filippo Valsorda
Filippo Valsorda
Adam Langley
Ian Lance Taylor
Brad Fitzpatrick
Josh Bleecher Snyder
Joonas Kuorilehto
Atin M
David Benjamin
Tamir Duberstein
Rob Pike
Jonathan Rudenberg
Joël Stemmer
Jacob H. Haven
Ben Burkert
Percy Wegmann
Robert Griesemer
Gautham Thambidorai