Before AEAD encryption data are stored in a buffer. Last possition
of this buffer store data type. When subsequent TLS record is shorter
than previous, the buffer is shrinked. This causes to remove data
type, which results in wrong MAC calculation. Only in case of TLS 1.3.
* includes AD in authentication check of TLS records
As per 5.2 of TLS 1.3 draft-28, the additional data is record header.
* tests: Update tests in order to support draft-28
* Interoperability: Updates NSS and BoringSSL versions to the
one supporting draft-28
* Bogo: Updates revision number to use tests for draft-28
* FIX: makefile was using test-compat target instead of
test-interop
* DC test: constify
* Use binary interface to encode in big-endian
Send/Skip CCS, set legacy record version to 3,3 and echo session ID.
CCS must be ignored while the handshake is running, but not thereafter:
https://tools.ietf.org/html/draft-ietf-tls-tls13-22#section-5
Unconditionally send CCS as server because bogo requires it, even if no
session ID is included in the Client Hello. TLS 1.3 clients MUST ignore
it anyway, so it should not hurt.
Fixes interop with boringssl and openssl and passes bogo.
Draft 21 changed end_of_early_data from an alert into a handshake
message to allow it to integrate better with the handshake. This change
does that, rather than handling EOD at the record layer, it moves
processing up to the actual readers of (early) application data.
Disable 0.5-RTT as it has weaker security properties than 1-RTT. The
same security considerations from TLS False Start (RFC 7918) apply.
Currently the server Handshake method returns as soon as it has sent its
parameters, but it does not wait for the client to authenticate the
handshake via a Finished message. This broke a test that assumed that
the Handshake message performs a full handshake and also
(unintentionally?) enabled the server to send application data before
the handshake is complete ("0.5-RTT data").
Fix this by moving the implicit Finished message check in the handshake
message reader to the server handshake itself (previously readRecord
would process the Finished message as a side-effect of requesting
recordTypeApplicationData). And in the special case where 0-RTT data is
actually desired, process the Finished message in the ConfirmHandshake
and Read functions.
NOTE: 0.5-RTT is not disabled when the server enables 0-RTT. It is the
server responsibility to use ConfirmHandshake before writing anything.
Explicitly panic when ConfirmHandshake is used for client connections,
this is not the intended use of that API.
Do not assume that every post-handshake messages are HelloRequests that
try to trigger a renegotiation. This could result in a no_renegotiation
(rather than an unexpected_message) alert even for other message types
(like NewSessionTicket).
This change makes the caller of readRecord(recordTypeApplicationData)
responsible for checking for renegotiation in case of a handshake
message, but that is currently already the case. And the condition
"c.phase == waitingClientFinished" can only be hit by the server, so
that won't have break the handshake either.
Related: https://github.com/cloudflare/tls-tris/issues/50
Merge serverHelloMsg13 into serverHelloMsg in preparation for draft 22.
This will also simplify the client implementation since only one
structure has to be checked.
Also fixed potential out-of-bounds access with keyShare unmarshal.
The record layer splits application data into chunks of at most 2^14
octets. When record protection is engaged in TLS 1.3, the application
data is serialized into a TLSInnerPlaintext which has an additional byte
for the content type, resulting in a maximum length of 2^14+1.
Fixes LargeMessage, TLS13-AEAD-CHACHA20-POLY1305-LargeRecord,
TLS13-AEAD-AES128-GCM-SHA256-LargeRecord and
TLS13-AEAD-AES256-GCM-SHA384-LargeRecord bogo tests.
Fixes: https://github.com/cloudflare/tls-tris/issues/46
Merge upstream go post-1.9 crypto/tls changes from master:
d8ee5d11e5 crypto/tls: limit number of consecutive warning alerts
96cd66b266 crypto/tls: advertise support for SHA-512 signatures in 1.2
f265f5db5d archive/zip, crypto/tls: use rand.Read instead of casting ints to bytes
54d04c2fcb crypto/tls: remove bookkeeping code from pHash function
d1bbdbe760 crypto/tls: replace signatureAndHash by SignatureScheme.
cb3b345209 crypto/tls: fix first byte test for 255 CBC padding bytes
d153df8e4b all: revert "all: prefer strings.LastIndexByte over strings.LastIndex"
5e42658fc0 all: prefer bytes.IndexByte over bytes.Index
d2826d3e06 all: prefer strings.LastIndexByte over strings.LastIndex
5a986eca86 all: fix article typos
0f9a2cf2c4 crypto/tls: fix clientHelloMsg fuzzer not to generate the RI SCSV
e7d46cee2f crypto/tls: fix and expand TestVerifyPeerCertificate and TestGetClientCertificate
85deaf6077 crypto/tls: fix docstring of Config.ClientSessionCache
4a5f85babb crypto/tls: disallow handshake messages fragmented across CCS
b3465646ff crypto/tls: add BenchmarkHandshakeServer
d38d357c78 crypto/tls: don't check whether an ec point is on a curve twice
e085a891f0 crypto/tls: split clientHandshake into multiple methods
Conflicts:
* handshake_client.go: conflict between our ("crypto/tls: allow client to
pick TLS 1.3, do not enable it by default.") and upstream
("crypto/tls: split clientHandshake into multiple methods"), resolve
by applying the mutualVersion->pickVersion change in pickTLSVersion.
* handshake_server.go: trivial conflict due to upstreamed patch
("crypto/tls: replace signatureAndHash by SignatureScheme.") and
("crypto/tls: implement TLS 1.3 server 0-RTT") which added pskBinder.
Other merge changes:
* tls13.go: signatureAndHashes as added in ("crypto/tls: implement TLS
1.3 minimal server") was renamed as required by ("crypto/tls: replace
signatureAndHash by SignatureScheme.").
* handshake_client.go: moved check from ("crypto/tls: check that client
cipher suite matches version") to pickCipherSuite as required by
("crypto/tls: split clientHandshake into multiple methods").
Not sure why the retry logic was removed since 0-RTT works even in
presence of the special alerts handling (alertEndOfEarlyData is
processed before the warning alert). To reduce divergence from upstream
code (which adds a restriction on the number of consecutive warnings),
restore the original retry logic.
Do not do anything fancy here, later drafts will remove the special
alert handling since it becomes a special handshake message.
Fixes: ("crypto/tls: implement TLS 1.3 server 0-RTT")
In the current implementation, it is possible for a client to
continuously send warning alerts, which are just dropped on the floor
inside readRecord.
This can enable scenarios in where someone can try to continuously
send warning alerts to the server just to keep it busy.
This CL implements a simple counter that triggers an error if
we hit the warning alert limit.
Fixes#22543
Change-Id: Ief0ca10308cf5a4dea21a5a67d3e8f6501912da6
Reviewed-on: https://go-review.googlesource.com/75750
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Filippo Valsorda <hi@filippo.io>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The BadCBCPadding255 test from bogo failed because at most 255 trailing
bytes were checked, but for a padding of 255 there are 255 padding bytes
plus 1 length byte with value 255.
Change-Id: I7dd237c013d2c7c8599067246e31b7ba93106cf7
Reviewed-on: https://go-review.googlesource.com/68070
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Phase should only be accessed under in.Mutex. Handshake and all Read
operations obtain that lock. However, many functions checking for
handshakeRunning only obtain handshakeMutex: reintroduce
handshakeCompleted for them. ConnectionState and Close check for
handshakeConfirmed, introduce an atomic flag for them.
There is no reason a server can't just send a CloseNotify in its first
flight, and then close the connection without reading the 0-RTT data.
Also, it's not expected of Close to block on reading, and interlocking
with a Read can cause a deadlock.
Fixes NCC-2016-001
Opening the 1.3 dances with the record layer because it has been the
most stable through the drafts, has the least dependencies, and has been
tricky in my experience.
Note that the record layer version check is entirely removed according
to https://tools.ietf.org/html/draft-ietf-tls-tls13-18#appendix-C.2.
A test that happened to hit that check (but was not made to test for it)
has changed to the next error in the stack.
There are no 1.3 tests at the moment, and I suspect they will all have to
wait for the patch cycle to reach interoperability.
Using > / <= VersionTLS13 for all conditionals to transparently support
draft versions and hypotetical future versions.
See https://tools.ietf.org/html/draft-ietf-tls-tls13-18#section-5.
Updates #9671
Change-Id: I97f0a59439728f194a1c50b48cff041469a0f00b
Detected by BoGo test FragmentAcrossChangeCipherSpec-Server-Packed.
Change-Id: I9a76697b9cdeb010642766041971de5c7e533481
Reviewed-on: https://go-review.googlesource.com/48811
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
There's no need to hold the handshake lock across this call and it can
lead to deadlocks if the net.Conn calls back into the tls.Conn.
Fixes#18426.
Change-Id: Ib1b2813cce385949d970f8ad2e52cfbd1390e624
Reviewed-on: https://go-review.googlesource.com/36561
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The tree is inconsistent about single l vs double l in those
words in documentation, test messages, and one error value text.
$ git grep -E '[Mm]arshall(|s|er|ers|ed|ing)' | wc -l
42
$ git grep -E '[Mm]arshal(|s|er|ers|ed|ing)' | wc -l
1694
Make it consistently a single l, per earlier decisions. This means
contributors won't be confused by misleading precedence, and it helps
consistency.
Change the spelling in one error value text in newRawAttributes of
crypto/x509 package to be consistent.
This change was generated with:
perl -i -npe 's,([Mm]arshal)l(|s|er|ers|ed|ing),$1$2,' $(git grep -l -E '[Mm]arshall' | grep -v AUTHORS | grep -v CONTRIBUTORS)
Updates #12431.
Follows https://golang.org/cl/14150.
Change-Id: I85d28a2d7692862ccb02d6a09f5d18538b6049a2
Reviewed-on: https://go-review.googlesource.com/33017
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
This is a rework of CL 25159 with fixes for the unstable test.
Updates #8579
Change-Id: I47608d2f82a88baff07a90fd64c280ed16a60d5e
Reviewed-on: https://go-review.googlesource.com/31318
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts commit c6185aa63217c84a1a73c578c155e7d4dec6cec8. That
commit seems to be causing flaky failures on the builders. See
discussion on the original thread: https://golang.org/cl/25159.
Change-Id: I26e72d962d4efdcee28a0bc61a53f246b046df77
Reviewed-on: https://go-review.googlesource.com/31316
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change adds support for the ChaCha20-Poly1305 AEAD to crypto/tls,
as specified in https://tools.ietf.org/html/rfc7905.
Fixes#15499.
Change-Id: Iaa689be90e03f208c40b574eca399e56f3c7ecf1
Reviewed-on: https://go-review.googlesource.com/30957
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
Updates #8579
Change-Id: I9c6bc193efcb25cc187f7735ee07170afa7fdde3
Reviewed-on: https://go-review.googlesource.com/25159
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The aim is to make the decrypt() timing profile constant, irrespective of
the CBC padding length or correctness. The old algorithm, on valid padding,
would only MAC bytes up to the padding length threshold, making CBC
ciphersuites vulnerable to plaintext recovery attacks as presented in the
"Lucky Thirteen" paper.
The new algorithm Write()s to the MAC all supposed payload, performs a
constant time Sum()---which required implementing a constant time Sum() in
crypto/sha1, see the "Lucky Microseconds" paper---and then Write()s the rest
of the data. This is performed whether the padding is good or not.
This should have no explicit secret-dependent timings, but it does NOT
attempt to normalize memory accesses to prevent cache timing leaks.
Updates #13385
Change-Id: I15d91dc3cc6eefc1d44f317f72ff8feb0a9888f7
Reviewed-on: https://go-review.googlesource.com/18130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
readRecord was not returning early if c.in.decrypt failed and ran
through the rest of the function. It does set c.in.err, so the various
checks in the callers do ultimately notice before acting on the result,
but we should avoid running the rest of the function at all.
Also rename 'err' to 'alertValue' since it isn't actually an error.
Change-Id: I6660924716a85af704bd3fe81521b34766238695
Reviewed-on: https://go-review.googlesource.com/24709
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
After renegotiation support was added (af125a5193c) it's possible for a
Write to block on a Read when racing to complete the handshake:
1. The Write determines that a handshake is needed and tries to
take the neccesary locks in the correct order.
2. The Read also determines that a handshake is needed and wins
the race to take the locks.
3. The Read goroutine completes the handshake and wins a race
to unlock and relock c.in, which it'll hold when waiting for
more network data.
If the application-level protocol requires the Write to complete before
data can be read then the system as a whole will deadlock.
Unfortunately it doesn't appear possible to reverse the locking order of
c.in and handshakeMutex because we might read a renegotiation request at
any point and need to be able to do a handshake without unlocking.
So this change adds a sync.Cond that indicates that a goroutine has
committed to doing a handshake. Other interested goroutines can wait on
that Cond when needed.
The test for this isn't great. I was able to reproduce the deadlock with
it only when building with -race. (Because -race happened to alter the
timing just enough.)
Fixes#17101.
Change-Id: I4e8757f7b82a84e46c9963a977d089f0fb675495
Reviewed-on: https://go-review.googlesource.com/29164
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
