* TLS 1.3 requries specific marshalling/unmarshalling of data
* This code should probably be rewritten in order ot use
a bit cleaner approach for dealing with bytes
Draft 21 changed end_of_early_data from an alert into a handshake
message to allow it to integrate better with the handshake. This change
does that, rather than handling EOD at the record layer, it moves
processing up to the actual readers of (early) application data.
D19: use early_data instead of custom ticket_early_data_info extension
codepoint. D21: new ticket nonce field and change in PSK calculation.
This nonce provides some minor security advantage in case one of the PSK
is compromised (which would leak the resumption master secret).
Rename "resumptionSecret" to "pskSecret" in sessionState13 to reflect
the D21 change and use constant-time comparison for the secret.
Also fix potential panic if the ticket is large enough, but the
extensions are missing.
Merge serverHelloMsg13 into serverHelloMsg in preparation for draft 22.
This will also simplify the client implementation since only one
structure has to be checked.
Also fixed potential out-of-bounds access with keyShare unmarshal.
Consolidate the signature and hash fields (SignatureAndHashAlgorithm in
TLS 1.2) into a single uint16 (SignatureScheme in TLS 1.3 draft 21).
This makes it easier to add RSASSA-PSS for TLS 1.2 in the future.
Fields were named like "signatureAlgorithm" rather than
"signatureScheme" since that name is also used throughout the 1.3 draft.
The only new public symbol is ECDSAWithSHA1, other than that this is an
internal change with no new functionality.
Change-Id: Iba63d262ab1af895420583ac9e302d9705a7e0f0
Reviewed-on: https://go-review.googlesource.com/62210
Reviewed-by: Adam Langley <agl@golang.org>
SNI values may not include a trailing dot according to
https://tools.ietf.org/html/rfc6066#section-3. Although crypto/tls
handled this correctly as a client, it didn't reject this as a server.
This change makes sending an SNI value with a trailing dot a fatal
error.
Updates #18114.
Change-Id: Ib7897ab40e98d4a7a4646ff8469a55233621f631
Reviewed-on: https://go-review.googlesource.com/33904
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The SignedCertificateTimestampList[1] specifies that both the list and
each element must not be empty. Checking that the list is not empty was
handled in [2] and this change checks that the SCTs themselves are not
zero-length.
[1] https://tools.ietf.org/html/rfc6962#section-3.3
[2] https://golang.org/cl/33265
Change-Id: Iabaae7a15f6d111eb079e5086e0bd2005fae9e48
Reviewed-on: https://go-review.googlesource.com/33355
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When the CT extension is enabled but no SCTs are present, the existing
code calls "continue" which causes resizing the data byte slice to be
skipped. In fact, such extensions should be rejected.
Fixes#17958
Change-Id: Iad12da10d1ea72d04ae2e1012c28bb2636f06bcd
Reviewed-on: https://go-review.googlesource.com/33265
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
cmd and runtime were handled separately, and I'm intentionally skipped
syscall. This is the rest of the standard library.
CL generated mechanically with github.com/mdempsky/unconvert.
Change-Id: I9e0eff886974dedc37adb93f602064b83e469122
Reviewed-on: https://go-review.googlesource.com/22104
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://tools.ietf.org/html/rfc7301#section-3.1 specifies that a
ProtocolName may not be empty. This change enforces this for ServerHello
messages—it's already enforced for ClientHello messages.
Change-Id: Ic5a5be6bebf07fba90a3cabd10b07ab7b4337f53
Reviewed-on: https://go-review.googlesource.com/12003
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The previous code had a brain fart: it took one of the length prefixes
as an element count, not a length. This didn't actually affect anything
because the loop stops as soon as it finds a hostname element, and the
hostname element is always the first and only element. (No other element
types have ever been defined.)
This change fixes the parsing in case SNI is ever changed in the future.
Fixes#10793.
Change-Id: Iafdf3381942bc22b1f33595315c53dc6cc2e9f0f
Reviewed-on: https://go-review.googlesource.com/11059
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
There are two methods by which TLS clients signal the renegotiation
extension: either a special cipher suite value or a TLS extension.
It appears that I left debugging code in when I landed support for the
extension because there's a "+ 1" in the switch statement that shouldn't
be there.
The effect of this is very small, but it will break Firefox if
security.ssl.require_safe_negotiation is enabled in about:config.
(Although almost nobody does this.)
This change fixes the original bug and adds a test. Sadly the test is a
little complex because there's no OpenSSL s_client option that mirrors
that behaviour of require_safe_negotiation.
Change-Id: Ia6925c7d9bbc0713e7104228a57d2d61d537c07a
Reviewed-on: https://go-review.googlesource.com/1900
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently an ECDHE handshake uses the client's curve preference. This
generally means that we use P-521. However, P-521's strength is
mismatched with the rest of the cipher suite in most cases and we have
a fast, constant-time implementation of P-256.
With this change, Go servers will use P-256 where the client supports
it although that can be overridden in the Config.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/66060043
The renegotiation extension was introduced[1] due to an attack by Ray in
which a client's handshake was spliced into a connection that was
renegotiating, thus giving an attacker the ability to inject an
arbitary prefix into the connection.
Go has never supported renegotiation as a server and so this attack
doesn't apply. As a client, it's possible that at some point in the
future the population of servers will be sufficiently updated that
it'll be possible to reject connections where the server hasn't
demonstrated that it has been updated to address this problem.
We're not at that point yet, but it's good for Go servers to support
the extension so that it might be possible to do in the future.
[1] https://tools.ietf.org/search/rfc5746
R=golang-codereviews, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/48580043
This does not include AES-GCM yet. Also, it assumes that the handshake and
certificate signature hash are always SHA-256, which is true of the ciphersuites
that we currently support.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10762044
I typoed the code and tried to parse all the way to the end of the
message. Therefore it fails when NPN is not the last extension in the
ServerHello.
Fixes#4088.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6637052
Session resumption saves a round trip and removes the need to perform
the public-key operations of a TLS handshake when both the client and
server support it (which is true of Firefox and Chrome, at least).
R=golang-dev, bradfitz, rsc
CC=golang-dev
https://golang.org/cl/6555051
Fix incorrect marshal/unmarshal of certificateRequest.
Add support for configuring client-auth on the server side.
Fix the certificate selection in the client side.
Update generate_cert.go to new time package
Fixes#2521.
R=krautz, agl, bradfitz
CC=golang-dev, mikkel
https://golang.org/cl/5448093
It would be nice not to have to support this since all the clients
that we care about support TLSv1 by now. However, due to buggy
implementations of SSLv3 on the Internet which can't do version
negotiation correctly, browsers will sometimes switch to SSLv3. Since
there's no good way for a browser tell a network problem from a buggy
server, this downgrade can occur even if the server in question is
actually working correctly.
So we need to support SSLv3 for robustness :(
Fixes#1703.
R=bradfitz
CC=golang-dev
https://golang.org/cl/5018045
We already had support on the client side. I also changed the name of
the flag in the ServerHello structure to match the name of the same
flag in the ClientHello (ocspStapling).
R=bradfitzgo
CC=golang-dev
https://golang.org/cl/4408044
This changeset implements client certificate support in crypto/tls
for both handshake_server.go and handshake_client.go
The updated server implementation sends an empty CertificateAuthorities
field in the CertificateRequest, thus allowing clients to send any
certificates they wish. Likewise, the client code will only respond
with its certificate when the server requests a certificate with this
field empty.
R=agl, rsc, agl1
CC=golang-dev
https://golang.org/cl/1975042
SNI (Server Name Indication) is a way for a TLS client to
indicate to the server which name it knows the server by. This
allows the server to have several names and return the correct
certificate for each (virtual hosting).
PeerCertificates returns the list of certificates presented by
server.
R=r
CC=golang-dev
https://golang.org/cl/1741053
parsing and printing to new syntax.
Use -oldparser to parse the old syntax,
use -oldprinter to print the old syntax.
2) Change default gofmt formatting settings
to use tabs for indentation only and to use
spaces for alignment. This will make the code
alignment insensitive to an editor's tabwidth.
Use -spaces=false to use tabs for alignment.
3) Manually changed src/exp/parser/parser_test.go
so that it doesn't try to parse the parser's
source files using the old syntax (they have
new syntax now).
4) gofmt -w src misc test/bench
1st set of files.
R=rsc
CC=agl, golang-dev, iant, ken2, r
https://golang.org/cl/180047
Henry D. Case
Peter Wu
Peter Wu
Filippo Valsorda
Brendan Mc
Filippo Valsorda
Adam Langley
woodsaj
Matthew Dempsky
Emmanuel Odeke
Jonathan Rudenberg
Michael Gehring
Jeff R. Allen
Russ Cox
Mikkel Krautz
Robert Griesemer
Christopher Wedgwood