CL 32871 updated the default cipher suites to use AES-GCM in
preference to ChaCha20-Poly1305 on platforms which have hardware
implementations of AES-GCM. This change makes BenchmarkThroughput
use the default cipher suites instead of the test cipher suites to
ensure that the recommended (fastest) algorithms are used.
Updates #17779.
Change-Id: Ib551223e4a00b5ea197d4d73748e1fdd8a47c32d
Reviewed-on: https://go-review.googlesource.com/32838
Run-TryBot: Michael Munday <munday@ca.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
I used the slowtests.go tool as described in
https://golang.org/cl/32684 on packages that stood out.
go test -short std drops from ~56 to ~52 seconds.
This isn't a huge win, but it was mostly an exercise.
Updates #17751
Change-Id: I9f3402e36a038d71e662d06ce2c1d52f6c4b674d
Reviewed-on: https://go-review.googlesource.com/32751
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, the selection of a client certificate done internally based
on the limitations given by the server's request and the certifcates in
the Config. This means that it's not possible for an application to
control that selection based on details of the request.
This change adds a callback, GetClientCertificate, that is called by a
Client during the handshake and which allows applications to select the
best certificate at that time.
(Based on https://golang.org/cl/25570/ by Bernd Fix.)
Fixes#16626.
Change-Id: Ia4cea03235d2aa3c9fd49c99c227593c8e86ddd9
Reviewed-on: https://go-review.googlesource.com/32115
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
This is a rework of CL 25159 with fixes for the unstable test.
Updates #8579
Change-Id: I47608d2f82a88baff07a90fd64c280ed16a60d5e
Reviewed-on: https://go-review.googlesource.com/31318
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
VerifyPeerCertificate returns an error if the peer should not be
trusted. It will be called after the initial handshake and before
any other verification checks on the cert or chain are performed.
This provides the callee an opportunity to augment the certificate
verification.
If VerifyPeerCertificate is not nil and returns an error,
then the handshake will fail.
Fixes#16363
Change-Id: I6a22f199f0e81b6f5d5f37c54d85ab878216bb22
Reviewed-on: https://go-review.googlesource.com/26654
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that we have the Clone method on tls.Config, net/http doesn't need
any custom functions to do that any more.
Change-Id: Ib60707d37f1a7f9a7d7723045f83e59eceffd026
Reviewed-on: https://go-review.googlesource.com/31595
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
GetConfigForClient allows the tls.Config to be updated on a per-client
basis.
Fixes#16066.
Fixes#15707.
Fixes#15699.
Change-Id: I2c675a443d557f969441226729f98502b38901ea
Reviewed-on: https://go-review.googlesource.com/30790
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit c6185aa632. That
commit seems to be causing flaky failures on the builders. See
discussion on the original thread: https://golang.org/cl/25159.
Change-Id: I26e72d962d4efdcee28a0bc61a53f246b046df77
Reviewed-on: https://go-review.googlesource.com/31316
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The CloseWrite method sends a close_notify alert record to the other
side of the connection. This record indicates that the sender has
finished sending on the connection. Unlike the Close method, the sender
may still read from the connection until it recieves a close_notify
record (or the underlying connection is closed). This is analogous to a
TCP half-close.
Updates #8579
Change-Id: I9c6bc193efcb25cc187f7735ee07170afa7fdde3
Reviewed-on: https://go-review.googlesource.com/25159
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In Go 1.0, the Config struct consisted only of exported fields.
In Go 1.1, it started to grow private, uncopyable fields (sync.Once,
sync.Mutex, etc).
Ever since, people have been writing their own private Config.Clone
methods, or risking it and doing a language-level shallow copy and
copying the unexported sync variables.
Clean this up and export the Config.clone method as Config.Clone.
This matches the convention of Template.Clone from text/template and
html/template at least.
Fixes#15771
Updates #16228 (needs update in x/net/http2 before fixed)
Updates #16492 (not sure whether @agl wants to do more)
Change-Id: I48c2825d4fef55a75d2f99640a7079c56fce39ca
Reviewed-on: https://go-review.googlesource.com/28075
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Add support for writing TLS client random and master secret
in NSS key log format.
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Normally this is enabled by a developer debugging TLS based
applications, especially HTTP/2, by setting the KeyLogWriter
to an open file. The keys negotiated in handshake are then
logged and can be used to decrypt TLS sessions e.g. in Wireshark.
Applications may choose to add support similar to NSS where this
is enabled by environment variable, but no such mechanism is
built in to Go. Instead each application must explicitly enable.
Fixes#13057.
Change-Id: If6edd2d58999903e8390b1674ba4257ecc747ae1
Reviewed-on: https://go-review.googlesource.com/27434
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I believe it's necessary to use a buffer size smaller than 64KB because
(at least some versions of) Window using a TCP receive window less than
64KB. Currently the client and server use buffer sizes of 16KB and 32KB,
respectively (the server uses io.Copy, which defaults to 32KB internally).
Since the server has been using 32KB, it should be safe for the client to
do so as well.
Fixes#15899
Change-Id: I36d44b29f2a5022c03fc086213d3c1adf153e983
Reviewed-on: https://go-review.googlesource.com/24581
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes some 40 warnings from go vet.
Fixes#16134.
Change-Id: Ib9fcba275fe692f027a2a07b581c8cf503b11087
Reviewed-on: https://go-review.googlesource.com/24287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This fixes `go test go/types`.
https://golang.org/cl/23487/ introduced this code which contains
two unused variables (declared and assigned to, but never read).
cmd/compile doesn't report the error due open issue #8560 (the
variables are assigned to in a closure), but go/types does. The
build bot only runs go/types tests in -short mode (which doesn't
typecheck the std lib), hence this doesn't show up on the dashboard
either.
We cannot call b.Fatal and friends in the goroutine. Communicating
the error to the invoking function requires a channel or a mutex.
Unless the channel/sycnhronized variable is tested in each iteration
that follows, the iteration blocks if there's a failure. Testing in
each iteration may affect benchmark times.
One could use a time-out but that time depends on the underlying system.
Panicking seems good enough in this unlikely case; better than hanging
or affecting benchmark times.
Change-Id: Idce1172da8058e580fa3b3e398825b0eb4316325
Reviewed-on: https://go-review.googlesource.com/23528
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Windows builders run the throughput benchmarks really slowly with a
64kb buffer. Lowering it to 16kb brings the performance back into line
with the other builders.
This is a work-around to get the build green until we can figure out why
the Windows builders are slow with the larger buffer size.
Update #15899
Change-Id: I215ebf115e8295295c87f3b3e22a4ef1f9e77f81
Reviewed-on: https://go-review.googlesource.com/23574
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current code, introduced after Go 1.6 to improve latency on
low-bandwidth connections, sends 1 kB packets until 1 MB has been sent,
and then sends 16 kB packets (the maximum record size).
Unfortunately this decreases throughput for 1-16 MB responses by 20% or so.
Following discussion on #15713, change cutoff to 128 kB sent
and also grow the size allowed for successive packets:
1 kB, 2 kB, 3 kB, ..., 15 kB, 16 kB.
This fixes the throughput problems: the overhead is now closer to 2%.
I hope this still helps with latency but I don't have a great way to test it.
At the least, it's not worse than Go 1.6.
Comparing MaxPacket vs DynamicPacket benchmarks:
name maxpkt time/op dyn. time/op delta
Throughput/1MB-8 5.07ms ± 7% 5.21ms ± 7% +2.73% (p=0.023 n=16+16)
Throughput/2MB-8 15.7ms ±201% 8.4ms ± 5% ~ (p=0.604 n=20+16)
Throughput/4MB-8 14.3ms ± 1% 14.5ms ± 1% +1.53% (p=0.000 n=16+16)
Throughput/8MB-8 26.6ms ± 1% 26.8ms ± 1% +0.47% (p=0.003 n=19+18)
Throughput/16MB-8 51.0ms ± 1% 51.3ms ± 1% +0.47% (p=0.000 n=20+20)
Throughput/32MB-8 100ms ± 1% 100ms ± 1% +0.24% (p=0.033 n=20+20)
Throughput/64MB-8 197ms ± 0% 198ms ± 0% +0.56% (p=0.000 n=18+7)
The small MB runs are bimodal in both cases, probably GC pauses.
But there's clearly no general slowdown anymore.
Fixes#15713.
Change-Id: I5fc44680ba71812d24baac142bceee0e23f2e382
Reviewed-on: https://go-review.googlesource.com/23487
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Don't do a substring search to test for a timeout error.
Fixes#14722 (maybe)
Change-Id: I4e18c749d6fd92c084a1b0b83a805119e1ae5ff2
Reviewed-on: https://go-review.googlesource.com/20403
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The tree's pretty inconsistent about single space vs double space
after a period in documentation. Make it consistently a single space,
per earlier decisions. This means contributors won't be confused by
misleading precedence.
This CL doesn't use go/doc to parse. It only addresses // comments.
It was generated with:
$ perl -i -npe 's,^(\s*// .+[a-z]\.) +([A-Z]),$1 $2,' $(git grep -l -E '^\s*//(.+\.) +([A-Z])')
$ go test go/doc -update
Change-Id: Iccdb99c37c797ef1f804a94b22ba5ee4b500c4f7
Reviewed-on: https://go-review.googlesource.com/20022
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Dave Day <djd@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Conn.Close sends an encrypted "close notify" to signal secure EOF.
But writing that involves acquiring mutexes (handshake mutex + the
c.out mutex) and writing to the network. But if the reason we're
calling Conn.Close is because the network is already being
problematic, then Close might block, waiting for one of those mutexes.
Instead of blocking, and instead of introducing new API (at least for
now), distinguish between a normal Close (one that sends a secure EOF)
and a resource-releasing destructor-style Close based on whether there
are existing Write calls in-flight.
Because io.Writer and io.Closer aren't defined with respect to
concurrent usage, a Close with active Writes is already undefined, and
should only be used during teardown after failures (e.g. deadlines or
cancelations by HTTP users). A normal user will do a Write then
serially do a Close, and things are unchanged for that case.
This should fix the leaked goroutines and hung net/http.Transport
requests when there are network errors while making TLS requests.
Change-Id: If3f8c69d6fdcebf8c70227f41ad042ccc3f20ac9
Reviewed-on: https://go-review.googlesource.com/18572
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change causes the types of skipped PEM blocks to be recorded when
no certificate or private-key data is found in a PEM input. This allows
for better error messages to be return in the case of common errors like
switching the certifiate and key inputs to X509KeyPair.
Fixes#11092
Change-Id: Ifc155a811cdcddd93b5787fe16a84c972011f2f7
Reviewed-on: https://go-review.googlesource.com/14054
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Strengthening VerifyHostname exposed the fact that for resumed
connections, ConnectionState().VerifiedChains was not being saved
and restored during the ClientSessionCache operations.
Do that.
This change just saves the verified chains in the client's session
cache. It does not re-verify the certificates when resuming a
connection.
There are arguments both ways about this: we want fast, light-weight
resumption connections (thus suggesting that we shouldn't verify) but
it could also be a little surprising that, if the verification config
is changed, that would be ignored if the same session cache is used.
On the server side we do re-verify client-auth certificates, but the
situation is a little different there. The client session cache is an
object in memory that's reset each time the process restarts. But the
server's session cache is a conceptual object, held by the clients, so
can persist across server restarts. Thus the chance of a change in
verification config being surprisingly ignored is much higher in the
server case.
Fixes#12024.
Change-Id: I3081029623322ce3d9f4f3819659fdd9a381db16
Reviewed-on: https://go-review.googlesource.com/13164
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
The one in misc/makerelease/makerelease.go is particularly bad and
probably warrants rotating our keys.
I didn't update old weekly notes, and reverted some changes involving
test code for now, since we're late in the Go 1.5 freeze. Otherwise,
the rest are all auto-generated changes, and all manually reviewed.
Change-Id: Ia2753576ab5d64826a167d259f48a2f50508792d
Reviewed-on: https://go-review.googlesource.com/12048
Reviewed-by: Rob Pike <r@golang.org>
Update #3514
An io.Reader is permitted to return either (n, nil)
or (n, io.EOF) on EOF or other error.
The tls package previously always returned (n, nil) for a read
of size n if n bytes were available, not surfacing errors at
the same time.
Amazon's HTTPS frontends like to hang up on clients without
sending the appropriate HTTP headers. (In their defense,
they're allowed to hang up any time, but generally a server
hangs up after a bit of inactivity, not immediately.) In any
case, the Go HTTP client tries to re-use connections by
looking at whether the response headers say to keep the
connection open, and because the connection looks okay, under
heavy load it's possible we'll reuse it immediately, writing
the next request, just as the Transport's always-reading
goroutine returns from tls.Conn.Read and sees (0, io.EOF).
But because Amazon does send an AlertCloseNotify record before
it hangs up on us, and the tls package does its own internal
buffering (up to 1024 bytes) of pending data, we have the
AlertCloseNotify in an unread buffer when our Conn.Read (to
the HTTP Transport code) reads its final bit of data in the
HTTP response body.
This change makes that final Read return (n, io.EOF) when
an AlertCloseNotify record is buffered right after, if we'd
otherwise return (n, nil).
A dependent change in the HTTP code then notes whether a
client connection has seen an io.EOF and uses that as an
additional signal to not reuse a HTTPS connection. With both
changes, the majority of Amazon request failures go
away. Without either one, 10-20 goroutines hitting the S3 API
leads to such an error rate that empirically up to 5 retries
are needed to complete an API call.
LGTM=agl, rsc
R=agl, rsc
CC=golang-codereviews
https://golang.org/cl/76400046
While reviewing uses of the lower-level Client API in code, I found
that in many cases, code was using Client only because it needed a
timeout on the connection. DialWithDialer allows a timeout (and
other values) to be specified without resorting to the low-level API.
LGTM=r
R=golang-codereviews, r, bradfitz
CC=golang-codereviews
https://golang.org/cl/68920045
Add support for loading X.509 key pairs that consist of a certificate
with an EC public key and its corresponding EC private key.
R=agl
CC=golang-dev
https://golang.org/cl/6776043
X509KeyPair wasn't really supposed to allow the certificate and
key to be in the same file, but it did work if you put the key
first. Since some HTTPS servers support loading keys and certs
like this, this change makes it work in either order.
Fixes#3986.
R=golang-dev, dave, rsc
CC=golang-dev
https://golang.org/cl/6499103
Michael Munday
Brad Fitzpatrick
Adam Langley
Ben Burkert
Joshua Boelter
Joonas Kuorilehto
Mikio Hara
Tom Bergan
Ian Lance Taylor
Robert Griesemer
Andrew Gerrand
Austin Clements
Russ Cox
Andres Erbsen
Joel Sing