inttypes.h kindly requires a feature macro in C++ on some platforms, due
to a bizarre footnote in C99 (see footnote 191 in section 7.8.1). As
bn.h is a public header, we must leak this wart to the consumer. On
platforms with unfriendly inttypes.h headers, using BN_DEC_FMT1 and
friends now require the feature macro be defined externally.
This broke the Chromium Android Clang builder:
http://build.chromium.org/p/chromium.linux/builders/Android%20Clang%20Builder%20%28dbg%29/builds/59288
Change-Id: I88275a6788c7babd0eae32cae86f115bfa93a591
Reviewed-on: https://boringssl-review.googlesource.com/4688
Reviewed-by: Adam Langley <agl@google.com>
First batch of the alphabet.
Change-Id: If4e60f4fbb69e04eb4b70aa1b2240e329251bfa5
Reviewed-on: https://boringssl-review.googlesource.com/4514
Reviewed-by: Adam Langley <agl@google.com>
This facilitates "universal" builds, ones that target multiple
architectures, e.g. ARMv5 through ARMv7.
(Imported from upstream's c1669e1c20)
This is a change from a while ago which was a source of divergence between our
perlasm and upstream's. This change in upstream came with the following comment
in Configure:
Note that -march is not among compiler options in below linux-armv4
target line. Not specifying one is intentional to give you choice to:
a) rely on your compiler default by not specifying one;
b) specify your target platform explicitly for optimal performance,
e.g. -march=armv6 or -march=armv7-a;
c) build "universal" binary that targets *range* of platforms by
specifying minimum and maximum supported architecture;
As for c) option. It actually makes no sense to specify maximum to be
less than ARMv7, because it's the least requirement for run-time
switch between platform-specific code paths. And without run-time
switch performance would be equivalent to one for minimum. Secondly,
there are some natural limitations that you'd have to accept and
respect. Most notably you can *not* build "universal" binary for
big-endian platform. This is because ARMv7 processor always picks
instructions in little-endian order. Another similar limitation is
that -mthumb can't "cross" -march=armv6t2 boundary, because that's
where it became Thumb-2. Well, this limitation is a bit artificial,
because it's not really impossible, but it's deemed too tricky to
support. And of course you have to be sure that your binutils are
actually up to the task of handling maximum target platform.
Change-Id: Ie5f674d603393f0a1354a0d0973987484a4a650c
Reviewed-on: https://boringssl-review.googlesource.com/4488
Reviewed-by: Adam Langley <agl@google.com>
Pointer out and suggested by: Ard Biesheuvel.
(Imported from upstream's 5dcf70a1c5)
This is from a while ago, but it's one source of divergence between our copy of
these files and master's.
Change-Id: I6525a27f25eb86a92420c32996af47ecc42ee020
Reviewed-on: https://boringssl-review.googlesource.com/4487
Reviewed-by: Adam Langley <agl@google.com>
See upstream's a0eed48d37. Rather than import
that, we should just ensure neg + zero isn't a possible state.
Add some tests for asc2bn and dec2bn while we're here. Also fix a bug with
dec2bn where it doesn't actually ignore trailing data as it's supposed to.
Change-Id: I2385b67b740e57020c75a247bee254085ab7ce15
Reviewed-on: https://boringssl-review.googlesource.com/4484
Reviewed-by: Adam Langley <agl@google.com>
This introduces a per-RSA/DSA/DH lock. This is good for lock contention,
although pthread locks are depressingly bloated.
Change-Id: I07c4d1606fc35135fc141ebe6ba904a28c8f8a0c
Reviewed-on: https://boringssl-review.googlesource.com/4324
Reviewed-by: Adam Langley <agl@google.com>
Limiting uses of crypto/bio to code that really need to it by avoiding
the use of BIO just to write to stdout/stderr.
Change-Id: I34e0f773161aeec073691e439ac353fb7b1785f3
Reviewed-on: https://boringssl-review.googlesource.com/3930
Reviewed-by: Adam Langley <agl@google.com>
A previous change in BoringSSL renamed ERR_print_errors_fp to
BIO_print_errors_fp as part of refactoring the code to improve the
layering of modules within BoringSSL. Rename it back for better
compatibility with code that was using the function under the original
name. Move its definition back to crypto/err using an implementation
that avoids depending on crypto/bio.
Change-Id: Iee7703bb1eb4a3d640aff6485712bea71d7c1052
Reviewed-on: https://boringssl-review.googlesource.com/4310
Reviewed-by: Adam Langley <agl@google.com>
It seems Android's inttypes.h refuses to define those macros on C++ unless
__STDC_FORMAT_MACROS is set. This unbreaks the roll on Android.
Change-Id: Iad6c971b4789f0302534d9e5022534c6124e0ff0
Reviewed-on: https://boringssl-review.googlesource.com/4202
Reviewed-by: Adam Langley <agl@google.com>
Along the way, fix a host of missing failure checks. This will save some
headache when it comes time to run these under the malloc failure tests.
Change-Id: I3fd589bd094178723398e793d6bc578884e99b67
Reviewed-on: https://boringssl-review.googlesource.com/4126
Reviewed-by: Adam Langley <agl@google.com>
In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
(Imported from upstream's 8c5a7b33c6269c3bd6bc0df6b4c22e4fba03b485.)
Change-Id: I0b392991ce8170dc418e93003af256d535d1e2e8
Reviewed-on: https://boringssl-review.googlesource.com/4005
Reviewed-by: Adam Langley <agl@google.com>
Fix a few remnants of them being unsigned long. Also rename extremely unhelpful
variable names in SSL_get_error. i is now ret_code to match the header.
Change-Id: Ic31d6626bfe09c9e21c03691dfc716c5573833ea
Reviewed-on: https://boringssl-review.googlesource.com/3881
Reviewed-by: Adam Langley <agl@google.com>
This reverts the non-ARM portions of 97999919bb.
x86_64 perlasm already makes .globl imply .hidden. (Confusingly, ARM does not.)
Since we don't need it, revert those to minimize divergence with upstream.
Change-Id: I2d205cfb1183e65d4f18a62bde187d206b1a96de
Reviewed-on: https://boringssl-review.googlesource.com/3610
Reviewed-by: Adam Langley <agl@google.com>
We are leaking asm symbols in Android builds because the asm code isn't
affected by -fvisibility=hidden. This change hides all asm symbols.
This assumes that no asm symbols are public API and that should be true.
Some points to note:
In crypto/rc4/asm/rc4-md5-x86_64.pl there are |RC4_set_key| and
|RC4_options| functions which aren't getting marked as hidden. That's
because those functions aren't actually ever generated. (I'm just trying
to minimise drift with upstream here.)
In crypto/rc4/asm/rc4-x86_64.pl there's |RC4_options| which is "public"
API, except that we've never had it in the header files. So I've just
deleted it. Since we have an internal caller, we'll probably have to put
it back in the future, but it can just be done in rc4.c to save
problems.
BUG=448386
Change-Id: I3846617a0e3d73ec9e5ec3638a53364adbbc6260
Reviewed-on: https://boringssl-review.googlesource.com/3520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is an import from ARM. Without this, one of the Android builds of
BoringSSL was failing with:
(sha512-armv4.o): requires unsupported dynamic reloc R_ARM_REL32; recompile with -fPIC
This is (I believe) a very misleading error message. The R_ARM_REL32
relocation type is the correct type for position independent code. But
unless the target symbol is hidden then the linker doesn't know that
it's not going to be overridden by a different ELF module.
Chromium probably gets away with this because of different default
compiler flags than Android.
Change-Id: I967eabc4d6b33d1e6635caaf6e7a306e4e77c101
Reviewed-on: https://boringssl-review.googlesource.com/3471
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
Win64 fires significantly more warnings than Win32. Also some recent
changes made it grumpy.
(We might want to reconsider enabling all of MSVC's warnings. Given the sorts
of warnings some of these are, I'm not sure MSVC's version of -Wall -Werror is
actually tenable. Plus, diverging from the Chromium build, especially before
the bots are ready, is going to break pretty readily.)
Change-Id: If3b8feccf910ceab4a233b0731e7624d7da46f87
Reviewed-on: https://boringssl-review.googlesource.com/3420
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A handful of latin-1 codepoints existed a trio of files. This change
switches the encoding to UTF-8.
Change-Id: I00309e4d1ee3101e0cc02abc53196eafa17a4fa5
(Imported from upstream's b3d7294976c58e0e05d0ee44a0e7c9c3b8515e05.)
May as well avoid diverging.
Change-Id: I3edec4fe15b492dd3bfb3146a8944acc6575f861
Reviewed-on: https://boringssl-review.googlesource.com/3020
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
RAND_pseudo_bytes just calls RAND_bytes now and only returns 0 or 1. Switch all
callers within the library call the new one and use the simpler failure check.
This fixes a few error checks that no longer work (< 0) and some missing ones.
Change-Id: Id51c79deec80075949f73fa1fbd7b76aac5570c6
Reviewed-on: https://boringssl-review.googlesource.com/2621
Reviewed-by: Adam Langley <agl@google.com>
Upstream (impressively quickly) fixed the missing intrinsic. Switch Windows
clang back to building the same code as MSVC. Also include the intrin.h header
rather than forward-declare the intrinsic. clang only works if the header is
explicitly included. Chromium forcibly includes it to work around these kinds
of issues, but we shouldn't rely on it.
BUG=crbug.com/438382
Change-Id: I0ff6d48e1a3aa455cff99f8dc4c407e88b84d446
Reviewed-on: https://boringssl-review.googlesource.com/2461
Reviewed-by: Adam Langley <agl@google.com>
Windows clang lacks _umul128, but it has inline assembly so just use
that.
Change-Id: I6ff5d2465edc703a4d47ef0efbcea43d6fcc79fa
Reviewed-on: https://boringssl-review.googlesource.com/2454
Reviewed-by: Adam Langley <agl@google.com>
Appease clang scan-build a bit. I'm not sure it's actually worth silencing all
of them because some of them look like preserving invariants between local
variables, but some are clearly pointless or can be restructured slightly.
Change-Id: I0bc81e2589bb402ff3ef0182d7a8921e31b85052
Reviewed-on: https://boringssl-review.googlesource.com/2205
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's ef908777218bd4a362dbe9cebb8e18fa8ab384cf.)
Change-Id: Id9b288d230cc9d8ab308690a18e687e2132e3293
Reviewed-on: https://boringssl-review.googlesource.com/2168
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never used, upstream or downstream. The 64-bit value is wrong anyway for
LLP64 platforms.
Change-Id: I56afc51f4c17ed3f1c30959b574034f181b5b0c7
Reviewed-on: https://boringssl-review.googlesource.com/2123
Reviewed-by: Adam Langley <agl@google.com>
bl and bh are never used by macros if either BN_UMULT_LOHI or
BN_UMULT_HIGH are defined.
Change-Id: I7fdd45014a6b78cc586b5223396e09bc213608a5
Reviewed-on: https://boringssl-review.googlesource.com/2105
Reviewed-by: Adam Langley <agl@google.com>
generic.c still needs to include generic implementations in Win64.
Those are currently done with inline assembly and won't work on
MSVC.
Change-Id: Ifeb5470872d8c97b2ccffeae6f3ccb5661051de3
Reviewed-on: https://boringssl-review.googlesource.com/2102
Reviewed-by: Adam Langley <agl@google.com>
We were building the NASM flavor with MASM which is why it didn't work. Get the
MASM output working: cpuid and cmove are not available in MASM unless the file
declares .686. Also work around MASM rejecting a very long line in SHA-256.
The follow-up change will get the NASM flavor working. We should probably use
that one as it's documented as supported upstream. But let's make this one
functional too.
Change-Id: Ica69cc042a7250c7bc9ba9325caab597cd4ce616
Reviewed-on: https://boringssl-review.googlesource.com/2091
Reviewed-by: Adam Langley <agl@google.com>
This resolves a pile of MSVC warnings in Chromium.
Change-Id: Ib9a29cb88d8ed8ec4118d153260f775be059a803
Reviewed-on: https://boringssl-review.googlesource.com/1865
Reviewed-by: Adam Langley <agl@google.com>
Chromium does not like static initializers, and the CPU logic uses one to
initialize CPU bits. However, the crypto library lacks an explicit
initialization function, which could complicate (no compile-time errors)
porting existing code which uses crypto/, but not ssl/.
Add an explicit CRYPTO_library_init function, but make it a no-op by default.
It only does anything (and is required) if building with
BORINGSSL_NO_STATIC_INITIALIZER.
Change-Id: I6933bdc3447fb382b1f87c788e5b8142d6f3fe39
Reviewed-on: https://boringssl-review.googlesource.com/1770
Reviewed-by: Adam Langley <agl@google.com>
Otherwise, in C, it becomes a K&R function declaration which doesn't actually
type-check the number of arguments.
Change-Id: I0731a9fefca46fb1c266bfb1c33d464cf451a22e
Reviewed-on: https://boringssl-review.googlesource.com/1582
Reviewed-by: Adam Langley <agl@google.com>
Android uses these for some conversions from Java formats. The code is
sufficiently bespoke that putting the conversion functions into
BoringSSL doesn't make a lot of sense, but the alternative is to expose
these ones.
Change-Id: If1362bc4a5c44cba4023c909e2ba6488ae019ddb
bn_get_bits5 always reads two bytes, even when it doesn't need to. For some
sizes of |p|, this can result in reading just past the edge of the array.
Unroll the first iteration of the loop and avoid reading out of bounds.
Replace bn_get_bits5 altogether in C as it's not doing anything interesting.
Change-Id: Ibcc8cea7d9c644a2639445396455da47fe869a5c
Reviewed-on: https://boringssl-review.googlesource.com/1393
Reviewed-by: Adam Langley <agl@google.com>
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
David Benjamin
Matt Braithwaite
Adam Langley
Brian Smith
Adam Langley