This adds the machinery for doing TLS 1.3 1RTT.
Change-Id: I736921ffe9dc6f6e64a08a836df6bb166d20f504
Reviewed-on: https://boringssl-review.googlesource.com/8720
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Not only test that we can enforce the message type correctly (this is
currently in protocol-specific code though really should not be), but
also test that each individual message is checked correctly.
Change-Id: I5ed0f4033f011186f020ea46940160c7639f688b
Reviewed-on: https://boringssl-review.googlesource.com/8793
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This will be used for writing the equivalent test in TLS 1.3 to the
recent DTLS change and similar.
Change-Id: I280c3ca8f1d8e0981b6e7a499acb7eceebe43a0c
Reviewed-on: https://boringssl-review.googlesource.com/8792
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is the equivalent of FragmentAcrossChangeCipherSuite for DTLS. It
is possible for us to, while receiving pre-CCS handshake messages, to
buffer up a message with sequence number meant for a post-CCS Finished.
When we then get to the new epoch and attempt to read the Finished, we
will process the buffered Finished although it was sent with the wrong
encryption.
Move ssl_set_{read,write}_state to SSL_PROTOCOL_METHOD hooks as this is
a property of the transport. Notably, read_state may fail. In DTLS
check the handshake buffer size. We could place this check in
read_change_cipher_spec, but TLS 1.3 has no ChangeCipherSpec message, so
we will need to implement this at the cipher change point anyway. (For
now, there is only an assert on the TLS side. This will be replaced with
a proper check in TLS 1.3.)
Change-Id: Ia52b0b81e7db53e9ed2d4f6d334a1cce13e93297
Reviewed-on: https://boringssl-review.googlesource.com/8790
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
TLS 1.3 will go through very different code than everything else. Even
SSL 3.0 is somewhat special-cased now. Move the invalid signature tests
there and run at all versions.
Change-Id: Idd0ee9aac2939c0c8fd9af2ea7b4a22942121c60
Reviewed-on: https://boringssl-review.googlesource.com/8775
Reviewed-by: David Benjamin <davidben@google.com>
For now, skip the 1.2 -> 1.1 signal since that will affect shipping
code. We may as well enable it too, but wait until things have settled
down. This implements the version in draft-14 since draft-13's isn't
backwards-compatible.
Change-Id: I46be43e6f4c5203eb4ae006d1c6a2fe7d7a949ec
Reviewed-on: https://boringssl-review.googlesource.com/8724
Reviewed-by: David Benjamin <davidben@google.com>
This way we can test failing client auth without having to worry about
first getting through server auth.
Change-Id: Iaf996d87ac3df702a17e76c26006ca9b2a5bdd1f
Reviewed-on: https://boringssl-review.googlesource.com/8721
Reviewed-by: David Benjamin <davidben@google.com>
(Of course, it's still signing ServerKeyExchange messages since the
handshake's the old one.)
Change-Id: I35844a329d983f61ed0b5be20b333487406fe7e4
Reviewed-on: https://boringssl-review.googlesource.com/8614
Reviewed-by: David Benjamin <davidben@google.com>
Implement in both C and Go. To test this, route config into all the
sign.go functions so we can expose bugs to skip the check.
Unfortunately, custom private keys are going to be a little weird since
we can't check their curve type. We may need to muse on what to do here.
Perhaps the key type bit should return an enum that includes the curve?
It's weird because, going forward, hopefully all new key types have
exactly one kind of signature so key type == sig alg == sig alg prefs.
Change-Id: I1f487ec143512ead931e3392e8be2a3172abe3d2
Reviewed-on: https://boringssl-review.googlesource.com/8701
Reviewed-by: David Benjamin <davidben@google.com>
{sha256,ecdsa} should not be silently accepted for an RSA key.
Change-Id: I0c0eea5071f7a59f2707ca0ea023a16cc4126d6a
Reviewed-on: https://boringssl-review.googlesource.com/8697
Reviewed-by: David Benjamin <davidben@google.com>
[Originally written by nharper, revised by davidben.]
When we add this in the real code, this will want ample tests and hooks
for bugs, but get the core logic in to start with.
Change-Id: I86cf0b6416c9077dbb6471a1802ae984b8fa6c72
Reviewed-on: https://boringssl-review.googlesource.com/8598
Reviewed-by: David Benjamin <davidben@google.com>
[Originally written by nharper and then revised by davidben.]
Most features are missing, but it works for a start. To avoid breaking
the fake TLS 1.3 tests while the C code is still not landed, all the
logic is gated on a global boolean. When the C code gets in, we'll
set it to true and remove this boolean.
Change-Id: I6b3a369890864c26203fc9cda37c8250024ce91b
Reviewed-on: https://boringssl-review.googlesource.com/8601
Reviewed-by: David Benjamin <davidben@google.com>
I'm surprised we'd never tested this. In addition to splitting handshake
records up, one may pack multiple handshakes into a single record, as
they fit. Generalize the DTLS handshake flush hook to do this in TLS as
well.
Change-Id: Ia546d18c7c56ba45e50f489c5b53e1fcd6404f51
Reviewed-on: https://boringssl-review.googlesource.com/8650
Reviewed-by: David Benjamin <davidben@google.com>
TLS 1.3 defines its own EncryptedExtensions message. The existing one is
for Channel ID which probably should not have tried to generalize
itself.
Change-Id: I4f48bece98510eb54e64fbf3df6c2a7332bc0261
Reviewed-on: https://boringssl-review.googlesource.com/8566
Reviewed-by: David Benjamin <davidben@google.com>
Right now I believe we are testing against DTLS 1.3 ClientHellos. Fix
this in preparation for making VersionTLS13 go elsewhere in the Go code.
Unfortunately, I made the mistake of mapping DTLS 1.0 to TLS 1.0 rather
than 1.1 in Go. This does mean the names of the tests naturally work out
correctly, but we have to deal with this awkward DTLS-1.1-shaped hole in
our logic.
Change-Id: I8715582ed90acc1f08197831cae6de8d5442d028
Reviewed-on: https://boringssl-review.googlesource.com/8562
Reviewed-by: David Benjamin <davidben@google.com>
In preparation for TLS 1.3 using its actual handshake, switch most tests
to TLS 1.3 and add liberal TODOs for the tests which will need TLS 1.3
variants.
In doing so, move a few tests from basic tests into one of the groups.
Also rename BadECDSACurve to BadECDHECurve (it was never ECDSA) and add
a test to make sure FALLBACK_SCSV is correctly sensitive to the maximum
version.
Change-Id: Ifca6cf8f7a48d6f069483c0aab192ae691b1dd8e
Reviewed-on: https://boringssl-review.googlesource.com/8560
Reviewed-by: David Benjamin <davidben@google.com>
TLS 1.3 defines a new SignatureScheme uint16 enum that is backwards
compatible on the wire with TLS1.2's SignatureAndHashAlgorithm. This
change updates the go testing code to use a single signatureAlgorithm
enum (instead of 2 separate signature and hash enums) in preparation for
TLS 1.3. It also unifies all the signing around this new scheme,
effectively backporting the change to TLS 1.2.
For now, it does not distinguish signature algorithms between 1.2 and
1.3 (RSA-PSS instead of RSA-PKCS1, ECDSA must match curve types). When
the C code is ready make a similar change, the Go code will be updated
to match.
[Originally written by nharper, tweaked significantly by davidben.]
Change-Id: If9a315c4670755089ac061e4ec254ef3457a00de
Reviewed-on: https://boringssl-review.googlesource.com/8450
Reviewed-by: David Benjamin <davidben@google.com>
This also adds a missing check to the C half to ensure fake record types are
always correct, to keep implementations honest.
Change-Id: I1d65272e647ffa67018c721d52c639f8ba47d647
Reviewed-on: https://boringssl-review.googlesource.com/8510
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
We were missing this case. It is possible to receive an early unencrypted
ChangeCipherSpec alert in DTLS because they aren't ordered relative to the
handshake. Test this case. (ChangeCipherSpec in DTLS is kind of pointless.)
Change-Id: I84268bc1821734f606fb20bfbeda91abf372f32c
Reviewed-on: https://boringssl-review.googlesource.com/8460
Reviewed-by: Adam Langley <agl@google.com>
This implements the cipher suite constraints in "fake TLS 1.3". It also makes
bssl_shim and runner enable it by default so we can start adding MaxVersion:
VersionTLS12 markers to tests as 1.2 vs. 1.3 differences begin to take effect.
Change-Id: If1caf6e43938c8d15b0a0f39f40963b8199dcef5
Reviewed-on: https://boringssl-review.googlesource.com/8340
Reviewed-by: David Benjamin <davidben@google.com>
This unifies a bunch of tests and also adds a few missing ones.
Change-Id: I91652bd010da6cdb62168ce0a3415737127e1577
Reviewed-on: https://boringssl-review.googlesource.com/8360
Reviewed-by: Nick Harper <nharper@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
By corrupting the X25519 and Newhope parts separately, the test shows
that both are in use. Possibly excessive?
Change-Id: Ieb10f46f8ba876faacdafe70c5561c50a5863153
Reviewed-on: https://boringssl-review.googlesource.com/8250
Reviewed-by: Adam Langley <agl@google.com>
This is easier to deploy, and more obvious. This commit reverts a few
pieces of e25775bc, but keeps most of it.
Change-Id: If8d657a4221c665349c06041bb12fffca1527a2c
Reviewed-on: https://boringssl-review.googlesource.com/8061
Reviewed-by: Adam Langley <agl@google.com>
CECPQ1 is a new key exchange that concatenates the results of an X25519
key agreement and a NEWHOPE key agreement.
Change-Id: Ib919bdc2e1f30f28bf80c4c18f6558017ea386bb
Reviewed-on: https://boringssl-review.googlesource.com/7962
Reviewed-by: David Benjamin <davidben@google.com>
The existing logic gets confused in a number of cases around close_notify vs.
fatal alert. SSL_shutdown, while still pushing to the error queue, will fail to
notice alerts. We also get confused if we try to send a fatal alert when we've
already sent something else.
Change-Id: I9b1d217fbf1ee8a9c59efbebba60165b7de9689e
Reviewed-on: https://boringssl-review.googlesource.com/7952
Reviewed-by: David Benjamin <davidben@google.com>
The specification, sadly, did not say that servers MUST NOT send it, only that
they are "not expected to" do anything with the client extension. Accordingly,
we decided to tolerate this. Add a test for this so that we check this
behavior.
This test also ensures that the original session's value for it carries over.
Change-Id: I38c738f218a09367c9d8d1b0c4d68ab5cbec730e
Reviewed-on: https://boringssl-review.googlesource.com/7860
Reviewed-by: Adam Langley <agl@google.com>
This is just kind of a silly thing to do. NSS doesn't allow them either. Fatal
alerts would kill the connection regardless and warning alerts are useless. We
previously stopped accepting fragmented alerts but still allowed them doubled
up.
This is in preparation for pulling the shared alert processing code between TLS
and DTLS out of read_bytes into some common place.
Change-Id: Idbef04e39ad135f9601f5686d41f54531981e0cf
Reviewed-on: https://boringssl-review.googlesource.com/7451
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS, you never skip the Certificate message. It may be empty, but its
presence is determined by CertificateRequest. (This is sensible.)
In SSL 3.0, the client omits the Certificate message. This means you need to
probe and may receive either Certificate or ClientKeyExchange (thankfully,
ClientKeyExchange is not optional, or we'd have to probe at ChangeCipherSpec).
We didn't have test coverage for this, despite some of this logic being a
little subtle asynchronously. Fix this.
Change-Id: I149490ae5506f02fa0136cb41f8fea381637bf45
Reviewed-on: https://boringssl-review.googlesource.com/7419
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
It's useful to make sure our fuzzer mode works. Not all tests pass, but most
do. (Notably the negative tests for everything we've disabled don't work.) We
can also use then use runner to record fuzzer-mode transcripts with the ciphers
correctly nulled.
Change-Id: Ie41230d654970ce6cf612c0a9d3adf01005522c6
Reviewed-on: https://boringssl-review.googlesource.com/7288
Reviewed-by: Adam Langley <agl@google.com>
Found by libFuzzer combined with some experimental unsafe-fuzzer-mode patches
(to be uploaded once I've cleaned them up a bit) to disable all those pesky
cryptographic checks in the protocol.
Change-Id: I9153164fa56a0c2262c4740a3236c2b49a596b1b
Reviewed-on: https://boringssl-review.googlesource.com/7282
Reviewed-by: Adam Langley <agl@google.com>
This is a minor regression from
https://boringssl-review.googlesource.com/5235.
If the client, for whatever reason, had an ID-based session but also
supports tickets, it will send non-empty ID + empty ticket extension.
If the ticket extension is non-empty, then the ID is not an ID but a
dummy signaling value, so 5235 avoided looking it up. But if it is
present and empty, the ID is still an ID and should be looked up.
This shouldn't have any practical consequences, except if a server
switched from not supporting tickets and then started supporting it,
while keeping the session cache fixed.
Add a test for this case, and tighten up existing ID vs ticket tests so
they fail if we resume with the wrong type.
Change-Id: Id4d08cd809af00af30a2b67fe3a971078e404c75
Reviewed-on: https://boringssl-review.googlesource.com/6554
Reviewed-by: Adam Langley <alangley@gmail.com>
This injects an interface to abstract between elliptic.Curve and a
byte-oriented curve25519. The C implementation will follow a similar
strategy.
Note that this slightly tweaks the order of operations. The client sees
the server public key before sending its own. To keep the abstraction
simple, ecdhCurve expects to generate a keypair before consuming the
peer's public key. Instead, the client handshake stashes the serialized
peer public value and defers parsing it until it comes time to send
ClientKeyExchange. (This is analogous to what it was doing before where
it stashed the parsed peer public value instead.)
BUG=571231
Change-Id: I771bb9aee0dd6903d395c84ec4f2dd7b3e366c75
Reviewed-on: https://boringssl-review.googlesource.com/6777
Reviewed-by: Adam Langley <agl@google.com>
Cover not just the wrong version, but also other mistakes.
Change-Id: I46f05a9a37b7e325adc19084d315a415777d3a46
Reviewed-on: https://boringssl-review.googlesource.com/6610
Reviewed-by: Adam Langley <agl@google.com>
RFC 5746 forbids a server from downgrading or upgrading
renegotiation_info support. Even with SSL_OP_LEGACY_SERVER_CONNECT set
(the default), we can still enforce a few things.
I do not believe this has practical consequences. The attack variant
where the server half is prefixed does not involve a renegotiation on
the client. The converse where the client sees the renegotiation and
prefix does, but we only support renego for the mid-stream HTTP/1.1
client auth hack, which doesn't do this. (And with triple-handshake,
HTTPS clients should be requiring the certificate be unchanged across
renego which makes this moot.)
Ultimately, an application which makes the mistake of using
renegotiation needs to be aware of what exactly that means and how to
handle connection state changing mid-stream. We make renego opt-in now,
so this is a tenable requirement.
(Also the legacy -> secure direction would have been caught by the
server anyway since we send a non-empty RI extension.)
Change-Id: I915965c342f8a9cf3a4b6b32f0a87a00c3df3559
Reviewed-on: https://boringssl-review.googlesource.com/6559
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.9.0. The Internet seems to have completely
forgotten what "D5" is. (I can't find reference to it beyond
documentation of this quirk.) The use counter we added sees virtually no
hits.
Change-Id: I9781d401acb98ce3790b1b165fc257a6f5e9b155
Reviewed-on: https://boringssl-review.googlesource.com/6557
Reviewed-by: Adam Langley <agl@google.com>
yaSSL has a couple of bugs in their DH client implementation. This
change works around the worst of the two.
Firstly, they expect the the DH public value to be the same length as
the prime. This change pads the public value as needed to ensure this.
Secondly, although they handle the first byte of the shared key being
zero, they don't handle the case of the second, third, etc bytes being
zero. So whenever that happens the handshake fails. I don't think that
there's anything that we can do about that one.
Change-Id: I789c9e5739f19449473305d59fe5c3fb9b4a6167
Reviewed-on: https://boringssl-review.googlesource.com/6578
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This option causes clients to ignore HelloRequest messages completely.
This can be suitable in cases where a server tries to perform concurrent
application data and handshake flow, e.g. because they are trying to
“renew” symmetric keys.
Change-Id: I2779f7eff30d82163f2c34a625ec91dc34fab548
Reviewed-on: https://boringssl-review.googlesource.com/6431
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
RFC 5077 explicitly allows the server to change its mind and send no
ticket by sending an empty NewSessionTicket. See also upstream's
21b538d616b388fa0ce64ef54da3504253895cf8.
CBS_stow handles this case somewhat, so we won't get confused about
malloc(0) as upstream did. But we'll still fill in a bogus SHA-256
session ID, cache the session, and send a ClientHello with bogus session
ID but empty ticket extension. (The session ID field changes meaning
significantly when the ticket is or isn't empty. Non-empty means "ignore
the session ID, but echo if it resuming" while empty means "I support
tickets, but am offering this session ID".
The other behavior change is that a server which changes its mind on a
resumption handshake will no longer override the client's session cache
with a ticket-less session.
(This is kind of silly. Given that we don't get completely confused due
to CBS_stow, it might not be worth bothering with the rest. Mostly it
bugged me that we send an indicator session ID with no ticket.)
Change-Id: Id6b5bde1fe51aa3e1f453a948e59bfd1e2502db6
Reviewed-on: https://boringssl-review.googlesource.com/6340
Reviewed-by: Adam Langley <alangley@gmail.com>
This change makes the runner tests (in ssl/test/runner) act like a
normal Go test rather than being a Go binary. This better aligns with
some internal tools.
Thus, from this point onwards, one has to run the runner tests with `go
test` rather than `go run` or `go build && ./runner`.
This will break the bots.
Change-Id: Idd72c31e8e0c2b7ed9939dacd3b801dbd31710dd
Reviewed-on: https://boringssl-review.googlesource.com/6009
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
SCT and OCSP are part of the session data and as such shouldn't be sent
again to the client when resuming.
Change-Id: Iaee3a3c4c167ea34b91504929e38aadee37da572
Reviewed-on: https://boringssl-review.googlesource.com/5900
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Last set of changes didn't do that.
Change-Id: Iae24e75103529ce4d50099c5cbfbcef0e10ba663
Reviewed-on: https://boringssl-review.googlesource.com/5871
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
The maximum buffer size computation wasn't quite done right in
ssl_buffer.c, so we were failing with BUFFER_TOO_SMALL for sufficiently
large records. Fix this and, as penance, add 103 tests.
(Test that we can receive maximum-size records in all cipher suites.
Also test SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER while I'm here.)
BUG=526998
Change-Id: I714c16dda2ed13f49d8e6cd1b48adc5a8491f43c
Reviewed-on: https://boringssl-review.googlesource.com/5785
Reviewed-by: Adam Langley <agl@google.com>
Now that it even works at all (type = 0 bug aside), add tests for it.
Test both close_notify being received before and after SSL_shutdown is
called. In the latter case, have the peer send some junk to be ignored
to test that works.
Also test that SSL_shutdown fails on unclean shutdown and that quiet
shutdowns ignore it.
BUG=526437
Change-Id: Iff13b08feb03e82f21ecab0c66d5f85aec256137
Reviewed-on: https://boringssl-review.googlesource.com/5769
Reviewed-by: Adam Langley <agl@google.com>
