Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
This change fixes up several comments (many of which were spotted by
Kenny Root) and also changes doc.go to detect cases where comments don't
start with the correct word. (This is a common error.)
Since we have docs builders now, these errors will be found
automatically in the future.
Change-Id: I58c6dd4266bf3bd4ec748763c8762b1a67ae5ab3
Reviewed-on: https://boringssl-review.googlesource.com/6440
Reviewed-by: Adam Langley <agl@google.com>
This function allows one to extract the current IVs from an SSL
connection. This is needed for the CBC cipher suites with implicit IVs
because, for those, the IV can't be extracted from the handshake key
material.
Change-Id: I247a1d0813b7a434b3cfc88db86d2fe8754344b6
Reviewed-on: https://boringssl-review.googlesource.com/6433
Reviewed-by: Adam Langley <agl@google.com>
They run through completely different logic as only handshake is fragmented.
This'll make it easier to rewrite the handshake logic in a follow-up.
Change-Id: I9515feafc06bf069b261073873966e72fcbe13cb
Reviewed-on: https://boringssl-review.googlesource.com/6420
Reviewed-by: Adam Langley <agl@google.com>
This option causes clients to ignore HelloRequest messages completely.
This can be suitable in cases where a server tries to perform concurrent
application data and handshake flow, e.g. because they are trying to
“renew” symmetric keys.
Change-Id: I2779f7eff30d82163f2c34a625ec91dc34fab548
Reviewed-on: https://boringssl-review.googlesource.com/6431
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Although the DTLS transport layer logic drops failed writes on the floor, it is
actually set up to work correctly. If an SSL_write fails at the transport,
dropping the buffer is fine. Arguably it works better than in TLS because we
don't have the weird "half-committed to data" behavior. Likewise, the handshake
keeps track of how far its gotten and resumes the message at the right point.
This broke when the buffering logic was rewritten because I didn't understand
what the DTLS code was doing. The one thing that doesn't work as one might
expect is non-fatal write errors during rexmit are not recoverable. The next
timeout must fire before we try again.
This code is quite badly sprinkled in here, so add tests to guard it against
future turbulence. Because of the rexmit issues, the tests need some hacks
around calls which may trigger them. It also changes the Go DTLS implementation
from being completely strict about sequence numbers to only requiring they be
monotonic.
The tests also revealed another bug. This one seems to be upstream's fault, not
mine. The logic to reset the handshake hash on the second ClientHello (in the
HelloVerifyRequest case) was a little overenthusiastic and breaks if the
ClientHello took multiple tries to send.
Change-Id: I9b38b93fff7ae62faf8e36c4beaf848850b3f4b9
Reviewed-on: https://boringssl-review.googlesource.com/6417
Reviewed-by: Adam Langley <agl@google.com>
This is a fairly timid, first step at trying to pack common structures a
little better.
This change reorders a couple of structures a little and turns some
variables into bit-fields. Much more can still be done.
Change-Id: Idbe0f54d66559c0ad654bf7e8dea277a771a568f
Reviewed-on: https://boringssl-review.googlesource.com/6394
Reviewed-by: Adam Langley <agl@google.com>
This came up and I wasn't sure which it was without source-diving.
Change-Id: Ie659096e0f42a7448f81dfb1006c125d292fd7fd
Reviewed-on: https://boringssl-review.googlesource.com/6354
Reviewed-by: Adam Langley <alangley@gmail.com>
Right whether NPN is advertised can only be configured globally on the SSL_CTX.
Rather than adding two pointers to each SSL*, add an options bit to disable it
so we may plumb in a field trial to disable NPN.
Chromium wants to be able to route a bit in to disable NPN, but it uses SSL_CTX
incorrectly and has a global one, so it can't disconnect the callback. (That
really needs to get fixed. Although it's not clear this necessarily wants to be
lifted up to SSL_CTX as far as Chromium's SSLClientSocket is concerned since
NPN doesn't interact with the session cache.)
BUG=526713
Change-Id: I49c86828b963eb341c6ea6a442557b7dfa190ed3
Reviewed-on: https://boringssl-review.googlesource.com/6351
Reviewed-by: Adam Langley <alangley@gmail.com>
The internal session cache is keyed on session ID, so this is completely
useless for clients (indeed we never look it up internally). Along the way,
tidy up ssl_update_cache to be more readable. The slight behavior change is
that SSL_CTX_add_session's return code no longer controls the external
callback. It's not clear to me what that could have accomplished. (It can only
fail on allocation error. We only call it for new sessions, so the duplicate
case is impossible.)
The one thing of value the internal cache might have provided is managing the
timeout. The SSL_CTX_flush_sessions logic would flip the not_resumable bit and
cause us not to offer expired sessions (modulo SSL_CTX_flush_sessions's delay
and any discrepancies between the two caches). Instead, just check expiration
when deciding whether or not to offer a session.
This way clients that set SSL_SESS_CACHE_CLIENT blindly don't accidentally
consume gobs of memory.
BUG=531194
Change-Id: If97485beab21874f37737edc44df24e61ce23705
Reviewed-on: https://boringssl-review.googlesource.com/6321
Reviewed-by: Adam Langley <alangley@gmail.com>
In doing so, fix the documentation for SSL_CTX_add_session and
SSL_CTX_remove_session. I misread the code and documented the behavior
on session ID collision wrong.
Change-Id: I6f364305e1f092b9eb0b1402962fd04577269d30
Reviewed-on: https://boringssl-review.googlesource.com/6319
Reviewed-by: Adam Langley <alangley@gmail.com>
A random 32-byte (so 256-bit) session ID is never going to collide with
an existing one. (And, if it does, SSL_CTX_add_session does account for
this, so the server won't explode. Just attempting to resume some
session will fail.)
That logic didn't completely work anyway as it didn't account for
external session caches or multiple connections picking the same ID in
parallel (generation and insertion happen at different times) or
multiple servers sharing one cache. In theory one could fix this by
passing in a sufficiently clever generate_session_id, but no one does
that.
I found no callers of these functions, so just remove them altogether.
Change-Id: I8500c592cf4676de6d7194d611b99e9e76f150a7
Reviewed-on: https://boringssl-review.googlesource.com/6318
Reviewed-by: Adam Langley <alangley@gmail.com>
Private structs shouldn't be shown. Also there's a few sections that are
really more implementation details than anything else.
Change-Id: Ibc5a23ba818ab0531d9c68e7ce348f1eabbcd19a
Reviewed-on: https://boringssl-review.googlesource.com/6313
Reviewed-by: Adam Langley <alangley@gmail.com>
Although Chromium actually uses SSL_(get_)state as part of its fallback
reason heuristic, that function really should go in the deprecated
bucket. I kept SSL_state_string_long since having a human-readable
string is probably useful for logging.
SSL_set_SSL_CTX was only half-documented as the behavior of this
function is very weird. This warrants further investigation and
rethinking.
SSL_set_shutdown is absurd. I added an assert to trip up clearing bits
and set it to a bitwise OR since clearing bits may mess up the state
machine. Otherwise there's enough consumers and it's not quite the same
as SSL_CTX_set_quiet_shutdown that I've left it alone for now.
Change-Id: Ie35850529373a5a795f6eb04222668ff76d84aaa
Reviewed-on: https://boringssl-review.googlesource.com/6312
Reviewed-by: Adam Langley <alangley@gmail.com>
It just calls CRYPTO_library_init and doesn't do anything else. If
anything, I'd like to make CRYPTO_library_init completely go away too.
We have CRYPTO_once now, so I think it's safe to assume that, if ssl/
ever grows initialization needs beyond that of crypto/, we can hide it
behind a CRYPTO_once and not burden callers.
Change-Id: I63dc362e0e9e98deec5516f4620d1672151a91b6
Reviewed-on: https://boringssl-review.googlesource.com/6311
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL_in_connect_init and SSL_in_accept_init are removed as they're unused
both within the library and externally. They're also kind of silly.
Expand on how False Start works at the API level in doing so.
Change-Id: Id2a8e34b5bb8f28329e3b87b4c64d41be3f72410
Reviewed-on: https://boringssl-review.googlesource.com/6310
Reviewed-by: Adam Langley <alangley@gmail.com>
They were since added to crypto.h and implemented in the library proper.
Change-Id: Idaa2fe2d9b213e67cf7ef61ff8bfc636dfa1ef1f
Reviewed-on: https://boringssl-review.googlesource.com/6309
Reviewed-by: Adam Langley <alangley@gmail.com>
They're really not all that helpful, considering they're each used
exactly once. They're also confusing as it is ALMOST the case that
SSL_TXT_FOO expands to "FOO", but SSL_TXT_AES_GCM expand "AESGCM" and
the protocol versions have lowercase v's and dots.
Change-Id: If78ad8edb0c024819219f61675c60c2a7f3a36b0
Reviewed-on: https://boringssl-review.googlesource.com/6307
Reviewed-by: Adam Langley <alangley@gmail.com>
This callback is some combination of arguably useful stuff (bracket
handshakes, alerts) and completely insane things (find out when the
state machine advances). Deprecate the latter.
Change-Id: Ibea5b32cb360b767b0f45b302fd5f1fe17850593
Reviewed-on: https://boringssl-review.googlesource.com/6305
Reviewed-by: Adam Langley <alangley@gmail.com>
Also clean up the code slightly.
Change-Id: I066a389242c46cdc7d41b1ae9537c4b7716c92a2
Reviewed-on: https://boringssl-review.googlesource.com/6302
Reviewed-by: Adam Langley <alangley@gmail.com>
Like tls1.h, ssl3.h is now just a bundle of protocol constants.
Hopefully we can opaquify this struct in due time, but for now it's
still public.
Change-Id: I68366eb233702e149c92e21297f70f8a4a45f060
Reviewed-on: https://boringssl-review.googlesource.com/6300
Reviewed-by: Adam Langley <alangley@gmail.com>
Now tls1.h is just a pile of protocol constants with no more circular
dependency problem.
I've preserved SSL_get_servername's behavior where it's simultaneously a
lookup of handshake state and local configuration. I've removed it from
SSL_get_servername_type. It got the logic wrong anyway with the order of
the s->session check.
(Searching through code, neither is used on the client, but the
SSL_get_servername one is easy.)
Change-Id: I61bb8fb0858b07d76a7835bffa6dc793812fb027
Reviewed-on: https://boringssl-review.googlesource.com/6298
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL_alert_desc_string_long was kept in the undeprecated bucket and one missing
alert was added. We have some uses and it's not completely ridiculous for
logging purposes.
The two-character one is ridiculous though and gets turned into a stub
that returns a constant string ("!" or "!!") because M2Crypto expects
it.
Change-Id: Iaf8794b5d953630216278536236c7113655180af
Reviewed-on: https://boringssl-review.googlesource.com/6297
Reviewed-by: Adam Langley <alangley@gmail.com>
(Documentation/deprecation will come in later commits.)
Change-Id: I3aba26e32b2e47a1afb5cedd44d09115fc193bce
Reviewed-on: https://boringssl-review.googlesource.com/6296
Reviewed-by: Adam Langley <alangley@gmail.com>
The only reason you'd want it is to tls_unique, and we have a better API
for that. (It has one caller and that is indeed what that caller uses it
for.)
Change-Id: I39f8e353f56f18becb63dd6f7205ad31f4192bfd
Reviewed-on: https://boringssl-review.googlesource.com/6295
Reviewed-by: Adam Langley <alangley@gmail.com>
This is redundant with SSL_get_error. Neither is very good API, but
SSL_get_error is more common. SSL_get_error also takes a return code
which makes it harder to accidentally call it at some a point other than
immediately after an operation. (Any other point is confusing since you
can have SSL_read and SSL_write operations going on in parallel and
they'll get mixed up.)
Change-Id: I5818527c30daac28edb552c6c550c05c8580292d
Reviewed-on: https://boringssl-review.googlesource.com/6294
Reviewed-by: Adam Langley <alangley@gmail.com>
It's pretty clearly pointless to put in the public header.
Change-Id: I9527aba09b618f957618e653c4f2ae379ddd0fdb
Reviewed-on: https://boringssl-review.googlesource.com/6293
Reviewed-by: Adam Langley <alangley@gmail.com>
Also added a SSL_CTX_set_select_certificate_cb setter for
select_certificate_cb so code needn't access SSL_CTX directly. Plus it
serves as a convenient anchor for the documentation.
Change-Id: I23755b910e1d77d4bea7bb9103961181dd3c5efe
Reviewed-on: https://boringssl-review.googlesource.com/6291
Reviewed-by: Adam Langley <alangley@gmail.com>
These are theh two remaining quirks (SSL_OP_LEGACY_SERVER_CONNECT
aside). Add counters so we can determine whether there are still clients
that trip up these cases.
Change-Id: I7e92f42f3830c1df675445ec15a852e5659eb499
Reviewed-on: https://boringssl-review.googlesource.com/6290
Reviewed-by: Adam Langley <alangley@gmail.com>
It's missing fields and no one ever calls it.
Change-Id: I450edc1e29bb48edffb5fd3df8da19a03e4185ce
Reviewed-on: https://boringssl-review.googlesource.com/5821
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's bf0fc41266f17311c5db1e0541d3dd12eb27deb6.
Change-Id: Ib692b0ad608f2e3291f2aeab2ad98a7e177d5851
Reviewed-on: https://boringssl-review.googlesource.com/6150
Reviewed-by: Adam Langley <agl@google.com>
Grouping along two axes is weird. Doesn't hugely matter which one, but
we should be consistent.
Change-Id: I80fb04d3eff739c08fda29515ce81d101d8542cb
Reviewed-on: https://boringssl-review.googlesource.com/6120
Reviewed-by: Adam Langley <agl@google.com>
The caller obligations for retransmit are messy, so I've peppered a few
other functions with mentions of it. There's only three functions, so
they're lumped in with the other core functions. They're irrelevant for
TLS, but important for DTLS.
Change-Id: Ifc995390952eef81370b58276915dcbe4fc7e3b5
Reviewed-on: https://boringssl-review.googlesource.com/6093
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the client_cert_cb variant since you can't really configure
intermediates with it. (You might be able to by configuring the
intermediates without the leaf or key and leaving the SSL stack to
configure those, but that's really weird. cert_cb is simpler.)
Also document the two functions the callbacks may use to query the
CertificateRequest on the client.
Change-Id: Iad6076266fd798cd74ea4e09978e7f5df5c8a670
Reviewed-on: https://boringssl-review.googlesource.com/6092
Reviewed-by: Adam Langley <agl@google.com>
Add a slightly richer API. Notably, one can configure ssl_renegotiate_once to
only accept the first renego.
Also, this API doesn't repeat the mistake I made with
SSL_set_reject_peer_renegotiations which is super-confusing with the negation.
Change-Id: I7eb5d534e3e6c553b641793f4677fe5a56451c71
Reviewed-on: https://boringssl-review.googlesource.com/6221
Reviewed-by: Adam Langley <agl@google.com>
I put an extra space in there. Also document ownership and return value.
Change-Id: I0635423be7774a7db54dbf638cc548d291121529
Reviewed-on: https://boringssl-review.googlesource.com/6010
Reviewed-by: Adam Langley <agl@google.com>
Putting it at the top was probably a mistake? Even though SSL_CIPHER
(like SSL_SESSION) doesn't depend on SSL, if you're reading through the
header, SSL_CTX and SSL are the most important types. You could even use
the library without touch cipher suite configs if you don't care since
the default is decently reasonable, though it does include a lot of
ciphers. (Hard to change that if we wanted to because DEFAULT is often
used somewhat like ALL and then people subtract from it.)
Change-Id: Ic9ddfc921858f7a4c141972fe0d1e465ca196b9d
Reviewed-on: https://boringssl-review.googlesource.com/5963
Reviewed-by: Adam Langley <agl@google.com>
The cipher suite rules could also be anchored on SSL_TXT_* if desired. I
currently documented them in prose largely because SSL_TXT_* also
defines protocol version strings and those are weird; SSL_TXT_TLSV1_1
isn't even a cipher rule. (And, in fact, those are the only SSL_TXT_*
macros that we can't blindly remove. I found some code that #ifdef's the
version SSL_TXT_* macros to decide if version-locked SSL_METHODs are
available.)
Also they clutter the header. I was thinking maybe we should dump a lot
of the random constants into a separate undocumented header or perhaps
just unexport them.
I'm slightly torn on this though and could easily be convinced in the
other direction. (Playing devil's advocate, anchoring on SSL_TXT_* means
we're less likely to forget to document one so long as adding a
SSL_TXT_* macro is the convention.)
Change-Id: Ide2ae44db9d6d8f29c24943090c210da0108dc37
Reviewed-on: https://boringssl-review.googlesource.com/5962
Reviewed-by: Adam Langley <agl@google.com>
This mirrors how the server halves fall under configuring certificates.
Change-Id: I9bde85eecfaff6487eeb887c88cb8bb0c36b83d8
Reviewed-on: https://boringssl-review.googlesource.com/5961
Reviewed-by: Adam Langley <agl@google.com>
∙ Some comments had the wrong function name at the beginning.
∙ Some ARM asm ended up with two #if defined(__arm__) lines – one from
the .pl file and one inserted by the translation script.
Change-Id: Ia8032cd09f06a899bf205feebc2d535a5078b521
Reviewed-on: https://boringssl-review.googlesource.com/6000
Reviewed-by: Adam Langley <agl@google.com>
Or at least group them together and make a passing attempt to document
them. The legacy X.509 stack itself remains largely untouched and most
of the parameters have to do with it.
Change-Id: I9e11e2ad1bbeef53478c787344398c0d8d1b3876
Reviewed-on: https://boringssl-review.googlesource.com/5942
Reviewed-by: Adam Langley <agl@google.com>
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
We wish to be able to detect the use of RC4 so that we can flag it and
investigate before it's disabled.
Change-Id: I6dc3a5d2211b281097531a43fadf08edb5a09646
Reviewed-on: https://boringssl-review.googlesource.com/5930
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Get them out of the way when reading through the header.
Change-Id: Ied3f3601262e74570769cb7f858dcff4eff44813
Reviewed-on: https://boringssl-review.googlesource.com/5898
Reviewed-by: Adam Langley <agl@google.com>
Existing documentation was moved to the header, very slightly tweaked.
Change-Id: Ife3c2351e2d7e6a335854284f996918039414446
Reviewed-on: https://boringssl-review.googlesource.com/5897
Reviewed-by: Adam Langley <agl@google.com>
These were already documented, though some of the documentation was
expanded on slightly.
Change-Id: I04c6276a83a64a03ab9cce9b9c94d4dea9ddf638
Reviewed-on: https://boringssl-review.googlesource.com/5896
Reviewed-by: Adam Langley <agl@google.com>
All these functions were already documented, just not grouped. I put
these above DTLS-SRTP and PSK as they're considerably less niche of
features.
Change-Id: I610892ce9763fe0da4f65ec87e5c7aaecb10388b
Reviewed-on: https://boringssl-review.googlesource.com/5895
Reviewed-by: Adam Langley <agl@google.com>
This gets the documentation into the ssl.h documentation, and removes
one of the circularly-dependent headers hanging off ssl.h. Also fixes
some typos; there were a few instances of "SSL *ctx".
Change-Id: I2a41c6f518f4780af84d468ed220fe7b0b8eb0d3
Reviewed-on: https://boringssl-review.googlesource.com/5883
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
To be consistent with some of the other headers and because SSL_METHOD
no longer has a place to anchor documentation, move the type
documentation up to the corresponding section headers, rather than
attached to a convenient function.
Also document thread-safety properties of SSL and SSL_CTX.
Change-Id: I7109d704d28dda3f5d83c72d86fe31bc302b816e
Reviewed-on: https://boringssl-review.googlesource.com/5876
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A small handful of functions got a 'Deprecated:' prefix instead in
documentation.
Change-Id: Ic151fb7d797514add66bc6465b6851b666a471bc
Reviewed-on: https://boringssl-review.googlesource.com/5825
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why one would ever want to externally know the curve list
supported by the server. The API is new as of 1.0.2 and has no callers.
Configuring curves will be much more useful when Curve25519 exists and the API
isn't terribly crazy, so keep that API around and promote it to a real
function.
BUG=404754
Change-Id: Ibd5858791d3dfb30d53dd680cb75b0caddcbb7df
Reviewed-on: https://boringssl-review.googlesource.com/5674
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
They were removed in the initial fork, but the ctrl macros remained.
BUG=404754
Change-Id: I5b20434faf494c54974a8d9a9df0e87ccf33c414
Reviewed-on: https://boringssl-review.googlesource.com/5670
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
It's never called anywhere and doesn't return anything interesting.
Change-Id: I68e7e9cd7b74a72f61092ac5d2b5d2390e55a228
Reviewed-on: https://boringssl-review.googlesource.com/5540
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for folding away certificate slots. extra_certs
and the slot-specific certificate chain will be the same.
SSL_CTX_get_extra_chain_certs already falls back to the slot-specific
chain if missing. SSL_CTX_get_extra_chain_certs_only is similar but
never falls back. This isn't very useful and is confusing with them
merged, so remove it.
BUG=486295
Change-Id: Ic708105bcf453dfe4e1969353d7eb7547ed2981b
Reviewed-on: https://boringssl-review.googlesource.com/5350
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
It's never used and is partially broken right now; EVP_PKEY_DH doesn't
work.
Change-Id: Id6262cd868153ef731e3f4d679b2ca308cfb12a3
Reviewed-on: https://boringssl-review.googlesource.com/5343
Reviewed-by: Adam Langley <agl@google.com>
The SSL23_ST_foo macros are only used in ssl_stat.c.
However, these states are never set and can be removed.
Move the two remaining SSLv2 client hello record macros to ssl3.h
Change-Id: I76055405a9050cf873b4d1cbc689e54dd3490b8a
Reviewed-on: https://boringssl-review.googlesource.com/4160
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
Having them spread between ssl.h and tls1.h isn't terribly enlightening.
Change-Id: I5fec4b8e5260312b22bcef21bd4db7a8a8149ad8
Reviewed-on: https://boringssl-review.googlesource.com/5234
Reviewed-by: Adam Langley <agl@google.com>
Using the original numerical order made more sense before they were changed to
doesnt_exist.
BUG=404754
Change-Id: I2971eff7c6fbe7c5d340b103de71bbfa180f1f96
Reviewed-on: https://boringssl-review.googlesource.com/5232
Reviewed-by: Adam Langley <agl@google.com>
Rather than rely on Chromium to query SSL_initial_handshake_complete in the
callback (which didn't work anyway because the callback is called afterwards),
move the logic into BoringSSL. BoringSSL already enforces that clients never
offer resumptions on renegotiation (it wouldn't work well anyway as client
session cache lookup is external), so it's reasonable to also implement
in-library that sessions established on a renegotiation are not cached.
Add a bunch of tests that new_session_cb is called when expected.
BUG=501418
Change-Id: I42d44c82b043af72b60a0f8fdb57799e20f13ed5
Reviewed-on: https://boringssl-review.googlesource.com/5171
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
Turns out the safer/simpler method still wasn't quite right. :-)
session->sess_cert isn't serialized and deserialized, which is poor. Duplicate
it manually for now. Leave a TODO to get rid of that field altogether as it's
not especially helpful. The certificate-related fields should be in the
session. The others probably have no reason to be preserved on resumptions at
all.
Test by making bssl_shim.cc assert the peer cert chain is there or not as
expected.
BUG=501220
Change-Id: I44034167629720d6e2b7b0b938d58bcab3ab0abe
Reviewed-on: https://boringssl-review.googlesource.com/5170
Reviewed-by: Adam Langley <agl@google.com>
To account for the changes in ticket renewal, Chromium will need to listen for
new_session_cb to determine whether the handshake produced a new session.
Chromium currently never caches sessions produced on a renegotiation. To retain
that behavior, it'll need to know whether new_session_cb is initial or not.
Rather than maintain duplicate state and listen for SSL_HANDSHAKE_DONE, it's
simpler to just let it query ssl->s3->initial_handshake_complete.
BUG=501418
Change-Id: Ib2f2541460bd09cf16106388e9cfdf3662e02681
Reviewed-on: https://boringssl-review.googlesource.com/5126
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 27c76b9b8010b536687318739c6f631ce4194688, CVE-2015-1791.
Rather than write a dup function, serializing and deserializing the object is
simpler. It also fixes a bug in the original fix where it never calls
new_session_cb to store the new session (for clients which use that callback;
how clients should handle the session cache is much less clear).
The old session isn't pruned as we haven't processed the Finished message yet.
RFC 5077 says:
The server MUST NOT assume that the client actually received the updated
ticket until it successfully verifies the client's Finished message.
Moreover, because network messages are asynchronous, a new SSL connection may
have began just before the client received the new ticket, so any such servers
are broken regardless.
Change-Id: I13b3dc986dc58ea2ce66659dbb29e14cd02a641b
Reviewed-on: https://boringssl-review.googlesource.com/5122
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
Some of the documentation had the right explanation but the incorrect
function names attached.
Change-Id: I7b479dae6d71a5ac7bc86df5a3890508c3b3d09f
Reviewed-on: https://boringssl-review.googlesource.com/5090
Reviewed-by: Adam Langley <agl@google.com>
The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
This is documented as "Only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation." Server-side renegotiation is gone.
I'm not sure this flag has ever worked anyway, dating all the way back to
SSLeay 0.8.1b. ssl_get_new_session overwrites s->session, so the old
session->peer is lost.
Change-Id: Ie173243e189c63272c368a55167b8596494fd59c
Reviewed-on: https://boringssl-review.googlesource.com/4883
Reviewed-by: Adam Langley <agl@google.com>
Never send the time as a client. Always send it as a server.
Change-Id: I20c55078cfe199d53dc002f6ee5dd57060b086d5
Reviewed-on: https://boringssl-review.googlesource.com/4829
Reviewed-by: Adam Langley <agl@google.com>
Yes, OpenSSL lets you randomly change its internal state. This is used
as part of server-side renegotiation. Server-side renegotiation is gone.
BUG=429450
Change-Id: Ic1b013705734357acf64e8bf89a051b2b7521c64
Reviewed-on: https://boringssl-review.googlesource.com/4828
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
This isn't exhaustive. There are still failures in some tests which probably
ought to get C++'d first.
Change-Id: Iac58df9d98cdfd94603d54374a531b2559df64c3
Reviewed-on: https://boringssl-review.googlesource.com/4795
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
SSL3_VERSION_MAJOR is the only MAJOR/MINOR number used internally or
externally.
Change-Id: I3f17175e73fd89887665accf1bfa680581f42dfe
Reviewed-on: https://boringssl-review.googlesource.com/4790
Reviewed-by: Adam Langley <agl@google.com>
Chromium's session cache has since been rewritten and no longer needs to
muck with those functions in tests.
Change-Id: I2defad81513210dca5e105757e04cbb677583251
Reviewed-on: https://boringssl-review.googlesource.com/4788
Reviewed-by: Adam Langley <agl@google.com>
Current thought is to organize this by:
- Core SSL_CTX APIs (creating, destroying)
- Core SSL APIs (creating destroying, maybe handshake, read, write as
well)
- APIs to configure SSL_CTX/SSL, roughly grouped by feature. Probably
options and modes are the first two sections. SSL_TXT_* constants can
be part of documenting cipher suite configuration.
- APIs to query state from SSL_CTX/SSL, roughly grouped by feature. (Or
perhaps these should be folded into the configuration sections?)
The functions themselves aren't reordered or reorganized to match the
eventual header order yet. Though I did do the s -> ssl rename on the
ones I've touched.
Also formally deprecate SSL_clear. It would be a core SSL API
except it's horrible.
Change-Id: Ia7e4fdcb7bad4e9ccdee8cf8c3136dc63aaaa772
Reviewed-on: https://boringssl-review.googlesource.com/4784
Reviewed-by: Adam Langley <agl@google.com>
The type names are perfectly serviceable. Most of them are
forward-declared in base.h.
Change-Id: Id03f5039a2d1bab82c68ade074a0e26cd3ab5ad9
Reviewed-on: https://boringssl-review.googlesource.com/4783
Reviewed-by: Adam Langley <agl@google.com>
|SSL_CTX| and |X509_STORE| have grown their own locks. Several static
locks have been added to hack around not being able to use a
|CRYPTO_once_t| in public headers. Lastly, support for calling
|SSL_CTX_set_generate_session_id| concurrently with active connections
has been removed. No other property of an |SSL_CTX| works like that.
Change-Id: Iff5fe3ee3fdd6ea9c9daee96f850b107ad8a6bca
Reviewed-on: https://boringssl-review.googlesource.com/4775
Reviewed-by: Adam Langley <agl@google.com>
Convert reference counts in ssl/ to use |CRYPTO_refcount_t|.
Change-Id: I5d60f641b0c89b1ddfe38bfbd9d7285c60377f4c
Reviewed-on: https://boringssl-review.googlesource.com/4773
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_current_cipher is documented by upstream to return the cipher actually
being used. However, because it reads s->session, it returns information
pertaining to the session to be offered if queried before ServerHello or early
in an abbreviated handshake.
Logic around s->session needs more comprehensive cleanup but for just this
function, defining it to be the current outgoing cipher is close to the current
semantics but for fixing the initial state (s->session->cipher is populated
when sending CCS). Store it in the SSL_AEAD_CTX which seems a natural place to
associate state pertaining to a connection half.
BUG=484744
Change-Id: Ife8db27a16615d0dbb2aec65359537243e08af7c
Reviewed-on: https://boringssl-review.googlesource.com/4733
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
We have a lot of options that don't do anything.
Change-Id: I1681fd07d1272547d4face87917ce41029bbf0de
Reviewed-on: https://boringssl-review.googlesource.com/4731
Reviewed-by: Adam Langley <agl@google.com>
As of crbug.com/484543, Chromium's SSLClientSocket is not sensitive to whether
renegotiation is enabled or not. Disable it by default and require consumers to
opt into enabling this protocol mistake.
BUG=429450
Change-Id: I2329068284dbb851da010ff1fd398df3d663bcc3
Reviewed-on: https://boringssl-review.googlesource.com/4723
Reviewed-by: Adam Langley <agl@google.com>
There's no real need to ever disable it, so this is one fewer configuration to
test. It's still disabled for DTLS, but a follow-up will resolve that.
Change-Id: Ia95ad8c17ae8236ada516b3968a81c684bf37fd9
Reviewed-on: https://boringssl-review.googlesource.com/4683
Reviewed-by: Adam Langley <agl@google.com>
