See upstream's 9f0b86c68bb96d49301bbd6473c8235ca05ca06b. Generated by
using upstream's script in 5a3ce86e21715a683ff0d32421ed5c6d5e84234d and
then manually throwing out the false positives. (We converted a bunch of
stuff already in 91157550061d5d794898fe47b95384a7ba5f7b9d.)
This may require some wrestling with depot_tools to land in Chromium due
to Rietveld's encoding bugs, but hopefully that will avoid future
problems; Rietveld breaks if either old or new file is Latin-1.
Change-Id: I26dcb20c7377f92a0c843ef5d74d440a82ea8ceb
Reviewed-on: https://boringssl-review.googlesource.com/5483
Reviewed-by: Adam Langley <agl@google.com>
The SHA-2 family has some exceptions, but they're all programmer errors
and should be documented as such. (Are the failure cases even
necessary?)
Change-Id: I00bd0a9450cff78d8caac479817fbd8d3de872b8
Reviewed-on: https://boringssl-review.googlesource.com/4953
Reviewed-by: Adam Langley <agl@google.com>
Use sized integer types rather than unsigned char/int/long. The latter
two are especially a mess as they're both used in lieu of uint32_t.
Sometimes the code just blindly uses unsigned long and sometimes it uses
unsigned int when an LP64 architecture would notice.
Change-Id: I4c5c6aaf82cfe9fe523435588d286726a7c43056
Reviewed-on: https://boringssl-review.googlesource.com/4952
Reviewed-by: Adam Langley <agl@google.com>
ARM has optimized Cortex-A5x pipeline to favour pairs of complementary
AES instructions. While modified code improves performance of post-r0p0
Cortex-A53 performance by >40% (for CBC decrypt and CTR), it hurts
original r0p0. We favour later revisions, because one can't prevent
future from coming. Improvement on post-r0p0 Cortex-A57 exceeds 50%,
while new code is not slower on r0p0, or Apple A7 for that matter.
[Update even SHA results for latest Cortex-A53.]
(Imported from upstream's 94376cccb4ed5b376220bffe0739140ea9dad8c8)
Change-Id: I581c65b566116b1f4211fb1bd5a1a54479889d70
Reviewed-on: https://boringssl-review.googlesource.com/4481
Reviewed-by: Adam Langley <agl@google.com>
Follow-up to sha256-armv4.pl in cooperation with Ard Biesheuvel
(Linaro) and Sami Tolvanen (Google).
(Imported from upstream's b1a5d1c652086257930a1f62ae51c9cdee654b2c.)
Change-Id: Ibc4f289cc8f499924ade8d6b8d494f53bc08bda7
Reviewed-on: https://boringssl-review.googlesource.com/4467
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 51f8d095562f36cdaa6893597b5c609e943b0565.)
I don't see why we'd care, but just to minimize divergence.
Change-Id: I4b07e72c88fcb04654ad28d8fd371e13d59a61b5
Reviewed-on: https://boringssl-review.googlesource.com/4466
Reviewed-by: Adam Langley <agl@google.com>
In cooperation with Ard Biesheuvel (Linaro) and Sami Tolvanen (Google).
(Imported from upstream's 2ecd32a1f8f0643ae7b38f59bbaf9f0d6ef326fe)
Change-Id: Iac5853220654b6ef4cb3bb7f8d1efe0eb2ecf634
Reviewed-on: https://boringssl-review.googlesource.com/4463
Reviewed-by: Adam Langley <agl@google.com>
This is as partial import of upstream's
9b05cbc33e7895ed033b1119e300782d9e0cf23c. It includes the perlasm changes, but
not the CPU feature detection bits as we do those differently. This is largely
so we don't diverge from upstream, but it'll help with iOS assembly in the
future.
sha512-armv8.pl is modified slightly from upstream to switch from conditioning
on the output file to conditioning on an extra argument. This makes our
previous change from upstream (removing the 'open STDOUT' line) more explicit.
BUG=338886
Change-Id: Ic8ca1388ae20e94566f475bad3464ccc73f445df
Reviewed-on: https://boringssl-review.googlesource.com/4405
Reviewed-by: Adam Langley <agl@google.com>
This reverts the non-ARM portions of 97999919bb.
x86_64 perlasm already makes .globl imply .hidden. (Confusingly, ARM does not.)
Since we don't need it, revert those to minimize divergence with upstream.
Change-Id: I2d205cfb1183e65d4f18a62bde187d206b1a96de
Reviewed-on: https://boringssl-review.googlesource.com/3610
Reviewed-by: Adam Langley <agl@google.com>
We are leaking asm symbols in Android builds because the asm code isn't
affected by -fvisibility=hidden. This change hides all asm symbols.
This assumes that no asm symbols are public API and that should be true.
Some points to note:
In crypto/rc4/asm/rc4-md5-x86_64.pl there are |RC4_set_key| and
|RC4_options| functions which aren't getting marked as hidden. That's
because those functions aren't actually ever generated. (I'm just trying
to minimise drift with upstream here.)
In crypto/rc4/asm/rc4-x86_64.pl there's |RC4_options| which is "public"
API, except that we've never had it in the header files. So I've just
deleted it. Since we have an internal caller, we'll probably have to put
it back in the future, but it can just be done in rc4.c to save
problems.
BUG=448386
Change-Id: I3846617a0e3d73ec9e5ec3638a53364adbbc6260
Reviewed-on: https://boringssl-review.googlesource.com/3520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is an import from ARM. Without this, one of the Android builds of
BoringSSL was failing with:
(sha512-armv4.o): requires unsupported dynamic reloc R_ARM_REL32; recompile with -fPIC
This is (I believe) a very misleading error message. The R_ARM_REL32
relocation type is the correct type for position independent code. But
unless the target symbol is hidden then the linker doesn't know that
it's not going to be overridden by a different ELF module.
Chromium probably gets away with this because of different default
compiler flags than Android.
Change-Id: I967eabc4d6b33d1e6635caaf6e7a306e4e77c101
Reviewed-on: https://boringssl-review.googlesource.com/3471
Reviewed-by: Adam Langley <agl@google.com>
This change syncs these asm files with upstream's 1.0.2 branch. The
important change is that they contain ARMv8 code that allows 32-bit ARM
code to use the hardware support in ARMv8 when running on such a chip.
Change-Id: Id37cb1ff0cbc98a8e328612df7cf60340ca96064
Reviewed-on: https://boringssl-review.googlesource.com/2921
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
Remove the existing md5_test and sha1_test. They now are all covered by
digest_test. For good measure, test the one-shot functions too.
Change-Id: I8e144cc563fb8817144e26cbd2e10c15642464ba
Reviewed-on: https://boringssl-review.googlesource.com/2211
Reviewed-by: Adam Langley <agl@google.com>
Chromium does not like static initializers, and the CPU logic uses one to
initialize CPU bits. However, the crypto library lacks an explicit
initialization function, which could complicate (no compile-time errors)
porting existing code which uses crypto/, but not ssl/.
Add an explicit CRYPTO_library_init function, but make it a no-op by default.
It only does anything (and is required) if building with
BORINGSSL_NO_STATIC_INITIALIZER.
Change-Id: I6933bdc3447fb382b1f87c788e5b8142d6f3fe39
Reviewed-on: https://boringssl-review.googlesource.com/1770
Reviewed-by: Adam Langley <agl@google.com>
Otherwise, in C, it becomes a K&R function declaration which doesn't actually
type-check the number of arguments.
Change-Id: I0731a9fefca46fb1c266bfb1c33d464cf451a22e
Reviewed-on: https://boringssl-review.googlesource.com/1582
Reviewed-by: Adam Langley <agl@google.com>
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 912f08dd5ed4f68fb275f3b2db828349fcffba14,
52f856526c46ee80ef4c8c37844f084423a3eff7 and
377551b9c4e12aa7846f4d80cf3604f2e396c964)
Change-Id: Ic2bf93371f6d246818729810e7a45b3f0021845a
Previously, public headers lived next to the respective code and there
were symlinks from include/openssl to them.
This doesn't work on Windows.
This change moves the headers to live in include/openssl. In cases where
some symlinks pointed to the same header, I've added a file that just
includes the intended target. These cases are all for backwards-compat.
Change-Id: I6e285b74caf621c644b5168a4877db226b07fd92
Reviewed-on: https://boringssl-review.googlesource.com/1180
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
