This removes support code for a "stream_mac" mode only used by GOST. Also get
rid of this
/* I should fix this up TLS TLS TLS TLS TLS XXXXXXXX */
comment next to it. It's not actually related to GOST (dates to OpenSSL initial
commit), but isn't especially helpful at this point.
Change-Id: Ib13c6e27e16e0d1fb59ed0142ddf913b9abc20b7
Reviewed-on: https://boringssl-review.googlesource.com/1281
Reviewed-by: Adam Langley <agl@google.com>
Some ssl23 functions that can be folded into ssl3, declarations and macros that
don't exist anymore.
Change-Id: I8057fb0bab8b6fe7e4da7b90a4945f7f22e29cd9
Reviewed-on: https://boringssl-review.googlesource.com/1280
Reviewed-by: Adam Langley <agl@google.com>
Without SSLv2, all cipher suite values are 2 bytes. Represent them as a
uint16_t and make all functions pass those around rather than pointers.
This removes SSL_CIPHER_find as it's unused.
Change-Id: Iea0b75abee4352a8333a4b8e39a161430ae55ea6
Reviewed-on: https://boringssl-review.googlesource.com/1259
Reviewed-by: Adam Langley <agl@google.com>
Don't retain curve IDs in serialized form; serialization only happens when
writing and reading from the wire. The internal representation is a uint16_t
which matches the range of the value and avoids all the checks for the first
byte being 0.
This also fixes a bug in tls1_check_ec_tmp_key's suite B logic; the || should
have been &&, though now it's gone.
This doesn't relieve some of the other assumptions about curve IDs:
tls1_set_curves still assumes that all curve IDs are under 32, and
tls1_ec_curve_id2nid still assumes 0 is not a valid curve ID. Add a
compile-time assert and a comment to document this. We're up to 28 now, so this
may well need to be revised sooner or later.
Remove SSL_get_shared_curve as it's new and unused API, using it in a loop is
O(N^3), and lets us simplify a function.
Change-Id: I82778cb82648d82f7b5de8c5341e0e1febdf5611
Reviewed-on: https://boringssl-review.googlesource.com/1256
Reviewed-by: Adam Langley <agl@google.com>
Also fix some DTLS cookie bugs. rcvd_cookie is never referenced after being
saved (and the length isn't saved, so it couldn't be used anyway), and the
cookie verification failed to check the length.
For convenience, add a CBS_mem_equal helper function. Saves a bit of
repetition.
Change-Id: I187137733b069f0ac8d8b1bf151eeb80d388b971
Reviewed-on: https://boringssl-review.googlesource.com/1174
Reviewed-by: Adam Langley <agl@google.com>
NPNServerTest in runner.go provides test coverage.
Change-Id: I5503ccbc4270e7f9f42ebc30c21e8077a430cf9f
Reviewed-on: https://boringssl-review.googlesource.com/1162
Reviewed-by: Adam Langley <agl@google.com>
This is the only codepath that allowed a cert_st to be shared between two
ssl_st's. Given that the cert_st currently contains some per-connection and
even per-handshake state, this probably doesn't work.
Remove the function altogether and don't ref-count cert_st.
Change-Id: I66d5346117cb59b6063e7b9b893d1c4b40cb6867
Reviewed-on: https://boringssl-review.googlesource.com/1110
Reviewed-by: Adam Langley <agl@google.com>
We pulled in some of upstream's removal, but not the rest of it.
Change-Id: I8ea6681848f3c59955b7d2ce935c077d024245be
Reviewed-on: https://boringssl-review.googlesource.com/1099
Reviewed-by: Adam Langley <agl@google.com>
Done with unifdef with some manual edits to remove empty lines.
Change-Id: I40d163539cab8ef0e01e45b7dc6a1a0a37733c3e
Reviewed-on: https://boringssl-review.googlesource.com/1097
Reviewed-by: Adam Langley <agl@google.com>
Building without RSA support is unreasonable. Changes were made by
running
find . -type f -name *.c | xargs unifdef -m -U OPENSSL_NO_RSA
find . -type f -name *.h | xargs unifdef -m -U OPENSSL_NO_RSA
using unifdef 2.10 and some newlines were removed manually.
Change-Id: Iea559e2d4b3d1053f28a4a9cc2f7a3d1f6cabd61
Reviewed-on: https://boringssl-review.googlesource.com/1095
Reviewed-by: Adam Langley <agl@google.com>
Found no users of the functions which control the feature. (Also I don't
particularly want to port all of that to CBS...)
Change-Id: I55da42c44d57252bd47bdcb30431be5e6e90dc56
Reviewed-on: https://boringssl-review.googlesource.com/1061
Reviewed-by: Adam Langley <agl@google.com>
This code doesn't even get built unless you go out of your way to pass an
extension value at build time.
Change-Id: I92ffcdfb18505c96e5ef390c8954a54cee19967f
Reviewed-on: https://boringssl-review.googlesource.com/1063
Reviewed-by: Adam Langley <agl@google.com>
If we need an extension, we can implement it in-library.
Change-Id: I0eac5affcd8e7252b998b6c86ed2068234134b08
Reviewed-on: https://boringssl-review.googlesource.com/1051
Reviewed-by: Adam Langley <agl@google.com>
Now that the consuming code in ssl/ is removed, there is no need for this.
Leave SSL_COMP and STACK_OF(SSL_COMP) for now so as not to break any code which
manipulates the output of SSL_COMP_get_compression_methods to disable
compression.
Change-Id: Idf0a5debd96589ef6e7e56acf5d9259412b7d7a1
With this change, calling SSL_enable_fallback_scsv on a client SSL* will
cause the fallback SCSV to be sent.
This is intended to be set when the client is performing TLS fallback
after a failed connection. (This only happens if the application itself
implements this behaviour: OpenSSL does not do fallback automatically.)
The fallback SCSV indicates to the server that it should reject the
connection if the version indicated by the client is less than the
version supported by the server.
See http://tools.ietf.org/html/draft-bmoeller-tls-downgrade-scsv-02.
Change-Id: I478d6d5135016f1b7c4aaa6c306a1a64b1d215a6
PSK identity hint can be stored in SSL_CTX and in SSL/SSL_SESSION,
similar to other TLS parameters, with the value in SSL/SSL_SESSION
taking precedence over the one in SSL_CTX. The value in SSL_CTX is
shared (used as the default) between all SSL instances associated
with that SSL_CTX, whereas the value in SSL/SSL_SESSION is confined
to that particular TLS/SSL connection/session.
The existing implementation of TLS-PSK does not correctly distinguish
between PSK identity hint in SSL_CTX and in SSL/SSL_SESSION. This
change fixes these issues:
1. SSL_use_psk_identity_hint does nothing and returns "success" when
the SSL object does not have an associated SSL_SESSION.
2. On the client, the hint in SSL_CTX (which is shared between
multiple SSL instances) is overwritten with the hint received from
server or reset to NULL if no hint was received.
3. On the client, psk_client_callback is invoked with the hint from
SSL_CTX rather than from current SSL/SSL_SESSION (i.e., the one
received from the server). Issue #2 above masks this issue.
4. On the server, the hint in SSL/SSL_SESSION is ignored and the hint
from SSL_CTX is sent to the client.
5. On the server, the hint in SSL/SSL_SESSION is reset to the one in
SSL_CTX after the ClientKeyExchange message step.
This change fixes the issues by:
* Adding storage for the hint in the SSL object. The idea being that
the hint in the associated SSL_SESSION takes precedence.
* Reading the hint during the handshake only from the associated
SSL_SESSION object.
* Initializing the hint in SSL object with the one from the SSL_CTX
object.
* Initializing the hint in SSL_SESSION object with the one from the
SSL object.
* Making SSL_use_psk_identity_hint and SSL_get_psk_identity_hint
set/get the hint to/from SSL_SESSION associated with the provided
SSL object, or, if no SSL_SESSION is available, set/get the hint
to/from the provided SSL object.
* Removing code which resets the hint during handshake.
This change implements equal-preference groups of cipher suites. This
allows, for example, a server to prefer one of AES-GCM or ChaCha20
ciphers, but to allow the client to pick which one. When coupled with
clients that will boost AES-GCM in their preferences when AES-NI is
present, this allows us to use AES-GCM when the hardware exists and
ChaCha20 otherwise.
This patch adds support for a different cipher list when the connection
is using TLS 1.1. This is intended to support the case where we want to
use AES with >= TLS 1.1 clients but RC4 otherwise because of the BEAST
attack.
(Called "cut through" for historical reasons in this patch.)
Enables SSL3+ clients to send application data immediately following the
Finished message even when negotiating full-handshakes. With this
patch, clients can negotiate SSL connections in 1-RTT even when
performing full-handshakes.
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
