OpenSSL 1.1.0 doesn't seem to have these two, so this isn't based on anything.
Have them return uint64_t in preparation for switching the internal
representation to uint64_t so ssl_record_sequence_update can go away.
Change-Id: I21d55e9a29861c992f409ed293e0930a7aaef7a3
Reviewed-on: https://boringssl-review.googlesource.com/6941
Reviewed-by: Adam Langley <alangley@gmail.com>
We have the hook on the SSL_CTX, but it should be possible to set it without
reaching into SSL_CTX.
Change-Id: I93db070c7c944be374543442a8de3ce655a28928
Reviewed-on: https://boringssl-review.googlesource.com/6880
Reviewed-by: Adam Langley <alangley@gmail.com>
Move it into ssl->s3 so it automatically behaves correctly on SSL_clear.
ssl->version is still a mess though.
Change-Id: I17a692a04a845886ec4f8de229fa6cf99fa7e24a
Reviewed-on: https://boringssl-review.googlesource.com/6844
Reviewed-by: Adam Langley <alangley@gmail.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
In code, structs that happened to have a '(' somewhere in their body
would cause the parser to go wrong. This change fixes that and updates
the comments on a number of structs.
Change-Id: Ia76ead266615a3d5875b64a0857a0177fec2bd00
Reviewed-on: https://boringssl-review.googlesource.com/6970
Reviewed-by: Adam Langley <agl@google.com>
Conscrypt needs to, in the certificate verification callback, know the key
exchange + auth method of the current cipher suite to pass into
X509TrustManager.checkServerTrusted. Currently it reaches into the struct to
get it. Add an API for this.
Change-Id: Ib4e0a1fbf1d9ea24e0114f760b7524e1f7bafe33
Reviewed-on: https://boringssl-review.googlesource.com/6881
Reviewed-by: David Benjamin <davidben@google.com>
Apparently OpenSSL's API is made entirely of initialization functions.
Some external libraries like to initialize with OPENSSL_config instead.
Change-Id: I28efe97fc5eb21309f560c84112b80e947f8bb17
Reviewed-on: https://boringssl-review.googlesource.com/6981
Reviewed-by: Adam Langley <agl@google.com>
With these stubs, cURL should not need any BoringSSL #ifdefs at all,
except for their OCSP #ifdefs (which can switch to the more generally
useful OPENSSL_NO_OCSP) and the workaround for wincrypt.h macro
collisions. That we intentionally leave to the consumer rather than add
a partial hack that makes the build sensitive to include order.
(I'll send them a patch upstream once this cycles in.)
Change-Id: I815fe67e51e80e9aafa9b91ae68867ca1ff1d623
Reviewed-on: https://boringssl-review.googlesource.com/6980
Reviewed-by: Adam Langley <agl@google.com>
This is only for Conscrypt which always calls the pair in succession. (Indeed
it wouldn't make any sense to not call it.) Remove those two APIs and replace
with a single merged API. This way incomplete EC_GROUPs never escape outside
our API boundary and EC_GROUPs may *finally* be made immutable.
Also add a test for this to make sure I didn't mess it up.
Add a temporary BORINGSSL_201512 define to ease the transition for Conscrypt.
Conscrypt requires https://android-review.googlesource.com/#/c/187801/ before
picking up this change.
Change-Id: I3706c2ceac31ed2313175ba5ee724bd5c74ef6e1
Reviewed-on: https://boringssl-review.googlesource.com/6550
Reviewed-by: Adam Langley <agl@google.com>
The new OPENSSL_PRINTF_FORMAT_FUNC macro let doc.go catch a few problems. It
also confuses doc.go, but this CL doesn't address that. At some point we
probably need to give it a real C parser.
Change-Id: I39f945df04520d1e0a0ba390cac7b308baae0622
Reviewed-on: https://boringssl-review.googlesource.com/6940
Reviewed-by: Adam Langley <agl@google.com>
Besides being a good idea anyway, this avoids clang warning about using
a non-literal format string when |ERR_add_error_dataf| calls
|BIO_vsnprintf|.
Change-Id: Iebc84d9c9d85e08e93010267d473387b661717a5
Reviewed-on: https://boringssl-review.googlesource.com/6920
Reviewed-by: David Benjamin <davidben@google.com>
This centralizes the conditional logic into openssl/base.h so that it
doesn't have to be repeated. The name |OPENSSL_PRINTF_FORMAT_FUNC| was
chosen in anticipation of eventually defining an
|OPENSSL_PRINTF_FORMAT_ARG| for MSVC-style parameter annotations.
Change-Id: I273e6eddd209e696dc9f82099008c35b6d477cdb
Reviewed-on: https://boringssl-review.googlesource.com/6909
Reviewed-by: David Benjamin <davidben@google.com>
This change imports the following changes from upstream:
6281abc79623419eae6a64768c478272d5d3a426
dfd3322d72a2d49f597b86dab6f37a8cf0f26dbf
f34b095fab1569d093b639bfcc9a77d6020148ff
21376d8ae310cf0455ca2b73c8e9f77cafeb28dd
25efcb44ac88ab34f60047e16a96c9462fad39c1
56353962e7da7e385c3d577581ccc3015ed6d1dc
39c76ceb2d3e51eaff95e04d6e4448f685718f8d
a3d74afcae435c549de8dbaa219fcb30491c1bfb
These contain the “altchains” functionality which allows OpenSSL to
backtrack when chain building.
Change-Id: I8d4bc2ac67b90091f9d46e7355cae878b4ccf37d
Reviewed-on: https://boringssl-review.googlesource.com/6905
Reviewed-by: Adam Langley <agl@google.com>
(Comment-only change; no functional difference.)
Some code was broken by the |d2i_ECDSA_SIG| change in 87897a8c. It was
passing in a pointer to an existing |ECDSA_SIG| as the first argument
and then simply assuming that the structure would be updated in place.
The comments on the function suggested that this was reasonable.
This change updates the comments that use similar wording to either note
that the function will never update in-place, or else to note that
depending on that is a bad idea for the future.
I've also audited all the uses of these functions that I can find and,
in addition to the one case with |d2i_ECDSA_SIG|, there are several
users of |d2i_PrivateKey| that could become a problem in the future.
I'll try to fix them before it does become an issue.
Change-Id: I769f7b2e0b5308d09ea07dd447e02fc161795071
Reviewed-on: https://boringssl-review.googlesource.com/6902
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is a companion to SSL_get_rc4_state and SSL_get_ivs which doesn't
require poking at internal state. Partly since it aligns with the
current code and partly the off chance we ever need to get
wpa_supplicant's EAP-FAST code working, the API allows one to generate
more key material than is actually in the key block.
Change-Id: I58bc3f2b017482dbb8567dcd0cd754947a95397f
Reviewed-on: https://boringssl-review.googlesource.com/6839
Reviewed-by: Adam Langley <alangley@gmail.com>
Both are connection state rather than configuration state. Notably this
cuts down more of SSL_clear that can't just use ssl_free + ssl_new.
Change-Id: I3c05b3ae86d4db8bd75f1cd21656f57fc5b55ca9
Reviewed-on: https://boringssl-review.googlesource.com/6835
Reviewed-by: Adam Langley <alangley@gmail.com>
Move the actual SSL_AEAD_CTX swap into the record layer. Also revise the
intermediate state we store between setup_key_block and
change_cipher_state. With SSL_AEAD_CTX_new abstracted out, keeping the
EVP_AEAD around doesn't make much sense. Just store enough to partition
the key block.
Change-Id: I773fb46a2cb78fa570f00c0a89339c15bbb1d719
Reviewed-on: https://boringssl-review.googlesource.com/6832
Reviewed-by: Adam Langley <alangley@gmail.com>
wpa_supplicant needs to get at the client and server random. OpenSSL
1.1.0 added these APIs, so match their semantics.
Change-Id: I2b71ba850ac63e574c9ea79012d1d0efec5a979a
Reviewed-on: https://boringssl-review.googlesource.com/6830
Reviewed-by: Adam Langley <alangley@gmail.com>
EVP_MAX_MD_SIZE is large enough to fit a MD5/SHA1 concatenation, and
necessarily is because EVP_md5_sha1 exists. This shaves 128 bytes of
per-connection state.
Change-Id: I848a8563dfcbac14735bb7b302263a638528f98e
Reviewed-on: https://boringssl-review.googlesource.com/6804
Reviewed-by: Adam Langley <agl@google.com>
This unifies the ClientKeyExchange code rather nicely. ServerKeyExchange
is still pretty specialized. For simplicity, I've extended the yaSSL bug
workaround for clients as well as servers rather than route in a
boolean.
Chrome's already banished DHE to a fallback with intention to remove
altogether later, and the spec doesn't say anything useful about
ClientDiffieHellmanPublic encoding, so this is unlikely to cause
problems.
Change-Id: I0355cd1fd0fab5729e8812e4427dd689124f53a2
Reviewed-on: https://boringssl-review.googlesource.com/6784
Reviewed-by: Adam Langley <agl@google.com>
We don't actually have an API to let you know if the value is legal to
interpret as a curve ID. (This was kind of a poor API. Oh well.) Also add tests
for key_exchange_info. I've intentionally left server-side plain RSA missing
for now because the SSL_PRIVATE_KEY_METHOD abstraction only gives you bytes and
it's probably better to tweak this API instead.
(key_exchange_info also wasn't populated on the server, though due to a
rebasing error, that fix ended up in the parent CL. Oh well.)
Change-Id: I74a322c8ad03f25b02059da7568c9e1a78419069
Reviewed-on: https://boringssl-review.googlesource.com/6783
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
There is some messiness around saving and restoring the CBB, but this is
still significantly clearer.
Note that the BUF_MEM_grow line is gone in favor of a fixed CBB like the
other functions ported thus far. This line was never necessary as
init_buf is initialized to 16k and none of our key exchanges get that
large. (The largest one can get is DHE_RSA. Even so, it'd take a roughly
30k-bit DH group with a 30k-bit RSA key.)
Having such limits and tight assumptions on init_buf's initial size is
poor (but on par for the old code which usually just blindly assumed the
message would not get too large) and the size of the certificate chain
is much less obviously bounded, so those BUF_MEM_grows can't easily go.
My current plan is convert everything but those which legitimately need
BUF_MEM_grow to CBB, then atomically convert the rest, remove init_buf,
and switch everything to non-fixed CBBs. This will hopefully also
simplify async resumption. In the meantime, having a story for
resumption means the future atomic change is smaller and, more
importantly, relieves some complexity budget in the ServerKeyExchange
code for adding Curve25519.
Change-Id: I1de6af9856caaed353453d92a502ba461a938fbd
Reviewed-on: https://boringssl-review.googlesource.com/6770
Reviewed-by: Adam Langley <agl@google.com>
This relieves some complexity budget for adding Curve25519 to this
code.
This also adds a BN_bn2cbb_padded helper function since this seems to be a
fairly common need.
Change-Id: Ied0066fdaec9d02659abd6eb1a13f33502c9e198
Reviewed-on: https://boringssl-review.googlesource.com/6767
Reviewed-by: Adam Langley <agl@google.com>
These will be needed when we start writing variable-length things to a
CBB.
Change-Id: Ie7b9b140f5f875b43adedc8203ce9d3f4068dfea
Reviewed-on: https://boringssl-review.googlesource.com/6764
Reviewed-by: Adam Langley <agl@google.com>
A lot of commented-out code we haven't had to put them back, so these
can go now. Also remove the TODO about OAEP having a weird API. The API
is wrong, but upstream's shipped it with the wrong API, so that's what
it is now.
Change-Id: I7da607cf2d877cbede41ccdada31380f812f6dfa
Reviewed-on: https://boringssl-review.googlesource.com/6763
Reviewed-by: Adam Langley <agl@google.com>
There's a few that can't work since the types don't even exist.
Change-Id: Idf860b146439c95d33814d25bbc9b8f61774b569
Reviewed-on: https://boringssl-review.googlesource.com/6762
Reviewed-by: Adam Langley <agl@google.com>
There was a TODO to remove it once asn1_mac.h was trimmed. This has now
happened. Remove it and reset error codes for crypto/asn1.
Change-Id: Iaf2f3e75741914415372939471b135618910f95d
Reviewed-on: https://boringssl-review.googlesource.com/6761
Reviewed-by: Adam Langley <agl@google.com>
This check was fixed a while ago, but it could have been much simpler.
In the RSA key exchange, the expected size of the output is known, making the
padding check much simpler. There isn't any use in exporting the more general
RSA_message_index_PKCS1_type_2. (Without knowing the expected size, any
integrity check or swap to randomness or other mitigation is basically doomed
to fail.)
Verified with the valgrind uninitialized memory trick that we're still
constant-time.
Also update rsa.h to recommend against using the PKCS#1 v1.5 schemes.
Thanks to Ryan Sleevi for the suggestion.
Change-Id: I4328076b1d2e5e06617dd8907cdaa702635c2651
Reviewed-on: https://boringssl-review.googlesource.com/6613
Reviewed-by: Adam Langley <agl@google.com>
Only ECDHE-based ciphers are implemented. To ease the transition, the
pre-standard cipher shares a name with the standard one. The cipher rule parser
is hacked up to match the name to both ciphers. From the perspective of the
cipher suite configuration language, there is only one cipher.
This does mean it is impossible to disable the old variant without a code
change, but this situation will be very short-lived, so this is fine.
Also take this opportunity to make the CK and TXT names align with convention.
Change-Id: Ie819819c55bce8ff58e533f1dbc8bef5af955c21
Reviewed-on: https://boringssl-review.googlesource.com/6686
Reviewed-by: Adam Langley <agl@google.com>
The consumers have all been updated, so we can move EVP_aead_chacha20_poly1305
to its final state. Unfortunately, the _rfc7539-suffixed version will need to
stick around for just a hair longer. Also the tls1.h macros, but the remaining
consumers are okay with that changing underneath them.
Change-Id: Ibbb70ec1860d6ac6a7e1d7b45e70fe692bf5ebe5
Reviewed-on: https://boringssl-review.googlesource.com/6600
Reviewed-by: Adam Langley <agl@google.com>
Rather than the length of the top-level CBB, which is kind of odd when ASN.1
length prefixes are not yet determined, return the number of bytes written to
the CBB so far. This can be computed without increasing the size of CBB at all.
Have offset and pending_*.
This means functions which take in a CBB as argument will not be sensitive to
whether the CBB is a top-level or child CBB. The extensions logic had to be
careful to only ever compare differences of lengths, which was awkward.
The reversal will also allow for the following pattern in the future, once
CBB_add_space is split into, say, CBB_reserve and CBB_did_write and we add a
CBB_data:
uint8_t *signature;
size_t signature_len = 0;
if (!CBB_add_asn1(out, &cert, CBB_ASN1_SEQUENCE) ||
/* Emit the TBSCertificate. */
!CBB_add_asn1(&cert, &tbs_cert, CBS_ASN1_SEQUENCE) ||
!CBB_add_tbs_cert_stuff(&tbs_cert, stuff) ||
!CBB_flush(&cert) ||
/* Feed it into md_ctx. */
!EVP_DigestSignInit(&md_ctx, NULL, EVP_sha256(), NULL, pkey) ||
!EVP_DigestSignUpdate(&md_ctx, CBB_data(&cert), CBB_len(&cert)) ||
/* Emit the signature algorithm. */
!CBB_add_asn1(&cert, &sig_alg, CBS_ASN1_SEQUENCE) ||
!CBB_add_sigalg_stuff(&sig_alg, other_stuff) ||
/* Emit the signature. */
!EVP_DigestSignFinal(&md_ctx, NULL, &signature_len) ||
!CBB_reserve(&cert, &signature, signature_len) ||
!EVP_DigestSignFinal(&md_ctx, signature, &signature_len) ||
!CBB_did_write(&cert, signature_len)) {
goto err;
}
(Were TBSCertificate not the first field, we'd still have to sample
CBB_len(&cert), but at least that's reasonable straight-forward. The
alternative would be if CBB_data and CBB_len somehow worked on
recently-invalidated CBBs, but that would go wrong once the invalidated CBB's
parent flushed and possibly shifts everything.)
And similar for signing ServerKeyExchange.
Change-Id: I7761e492ae472d7632875b5666b6088970261b14
Reviewed-on: https://boringssl-review.googlesource.com/6681
Reviewed-by: Adam Langley <agl@google.com>
The uint32_t likely dates to them using HASH_LONG everywhere. Nothing ever
touches c->data as a uint32_t, only bytes. (Which makes sense seeing as it
stores the partial block.)
Change-Id: I634cb7f2b6306523aa663f8697b7dc92aa491320
Reviewed-on: https://boringssl-review.googlesource.com/6651
Reviewed-by: Adam Langley <agl@google.com>
Manual tweaks and then clang-formatted again.
Change-Id: I809fdb71b2135343e5c1264dd659b464780fc54a
Reviewed-on: https://boringssl-review.googlesource.com/6649
Reviewed-by: Adam Langley <agl@google.com>
It is redundant given the other state in the connection.
Change-Id: I5dc71627132659ab4316a5ea360c9ca480fb7c6c
Reviewed-on: https://boringssl-review.googlesource.com/6646
Reviewed-by: Adam Langley <agl@google.com>
These have been unused since we unified everything on EVP_AEAD. I must
have missed them when clearing out dead state. This shaves 136 bytes of
per-connection state.
Change-Id: I705f8de389fd34ab4524554ee9e4b1d6be198994
Reviewed-on: https://boringssl-review.googlesource.com/6645
Reviewed-by: Adam Langley <agl@google.com>
There's no need to track consumed bytes, so rr->data and rr->off may be
merged together.
Change-Id: I8842d005665ea8b4d4a0cced941f3373872cdac4
Reviewed-on: https://boringssl-review.googlesource.com/6644
Reviewed-by: Adam Langley <agl@google.com>
38 error codes have fallen off the list since the last time we did this.
Change-Id: Id7ee30889a5da2f6ab66957fd8e49e97640c8489
Reviewed-on: https://boringssl-review.googlesource.com/6643
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
With server-side renegotiation gone, handshake_fragment's only purpose
in life is to handle a fragmented HelloRequest (we probably do need to
support those if some server does 1/n-1 record-splitting on handshake
records). The logic to route the data into
ssl3_read_bytes(SSL3_RT_HANDSHAKE) never happens, and the contents are
always a HelloRequest prefix.
This also trims a tiny bit of per-connection state.
Change-Id: Ia1b0dda5b7e79d817c28da1478640977891ebc97
Reviewed-on: https://boringssl-review.googlesource.com/6641
Reviewed-by: Adam Langley <agl@google.com>
Avoids bouncing on the lock, but it doesn't really matter since it's all
taking read locks. If we're declaring that callbacks don't get to see
every object being created, they shouldn't see every object being
destroyed.
CRYPTO_dup_ex_data also already had this optimization, though it wasn't
documented.
BUG=391192
Change-Id: I5b8282335112bca3850a7c0168f8bd7f7d4a2d57
Reviewed-on: https://boringssl-review.googlesource.com/6626
Reviewed-by: Adam Langley <agl@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.8.0 (or earlier). The use counter sees virtually
no hits.
Change-Id: Iff4c8899d5cb0ba4afca113c66d15f1d980ffe41
Reviewed-on: https://boringssl-review.googlesource.com/6558
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.9.0. The Internet seems to have completely
forgotten what "D5" is. (I can't find reference to it beyond
documentation of this quirk.) The use counter we added sees virtually no
hits.
Change-Id: I9781d401acb98ce3790b1b165fc257a6f5e9b155
Reviewed-on: https://boringssl-review.googlesource.com/6557
Reviewed-by: Adam Langley <agl@google.com>
|EC_GROUP_get0_order| doesn't require any heap allocations and never
fails, so it is much more convenient and more efficient for callers to
call.
Change-Id: Ic60f768875e7bc8e74362dacdb5cbbc6957b05a6
Reviewed-on: https://boringssl-review.googlesource.com/6532
Reviewed-by: Adam Langley <agl@google.com>
BUG=webrtc:5222
Change-Id: I8399bd595564dedbe5492b8ea6eb915f41367cbf
Reviewed-on: https://boringssl-review.googlesource.com/6690
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Windows does support anonymous unions but warns about it. Since I'm not
sure what warnings we have enabled in Chromium, this change just drops
the union for Windows.
Change-Id: I914f8cd5855eb07153105250c0f026eaedb35365
Reviewed-on: https://boringssl-review.googlesource.com/6631
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
wpa_supplicant needs access to the internals of SHA_CTX. We supported
this only for builds with ANDROID defined previously but that's a pain
for wpa_supplicant to deal with. Thus this change enables it
unconditionally.
Perhaps in the future we'll be able to get a function to do this into
OpenSSL and BoringSSL.
Change-Id: Ib5d088c586fe69249c87404adb45aab5a7d5cf80
Reviewed-on: https://boringssl-review.googlesource.com/6630
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Right now your options are:
- Bounce on a reference and deal with cleanup needlessly.
- Manually check the type tag and peek into the union.
We probably have no hope of opaquifying this struct, but for new code, let's
recommend using this function rather than the more error-prone thing.
Change-Id: I9b39ff95fe4264a3f7d1e0d2894db337aa968f6c
Reviewed-on: https://boringssl-review.googlesource.com/6551
Reviewed-by: Adam Langley <agl@google.com>
The |ri| field was only used in |BN_MONT_CTX_set|, so make it a local
variable of that function.
Change-Id: Id8c3d44ac2e30e3961311a7b1a6731fe2c33a0eb
Reviewed-on: https://boringssl-review.googlesource.com/6526
Reviewed-by: Adam Langley <agl@google.com>
Trim the cipher table further. Those values are entirely determined by
algorithm_enc.
Change-Id: I355c245b0663e41e54e62d15903a4a9a667b4ffe
Reviewed-on: https://boringssl-review.googlesource.com/6516
Reviewed-by: Adam Langley <agl@google.com>
FIPS is the same as HIGH (but for CHACHA20), so those are redundant.
Likewise, MEDIUM vs HIGH was just RC4. Remove those in favor of
redefining those legacy rules to mean this.
One less field to keep track of in each cipher.
Change-Id: I2b2489cffb9e16efb0ac7d7290c173cac061432a
Reviewed-on: https://boringssl-review.googlesource.com/6515
Reviewed-by: Adam Langley <agl@google.com>
It's redundant with other cipher properties. We can express these in code.
Cipher rule matching gets a little bit complicated due to the confusing legacy
protocol version cipher rules, so add some tests for it. (It's really hard to
grep for uses of them, so I've kept them working to be safe.)
Change-Id: Ic6b3fcd55d76d4a51b31bf7ae629a2da50a7450e
Reviewed-on: https://boringssl-review.googlesource.com/6453
Reviewed-by: Adam Langley <agl@google.com>
The keylog BIO is internally synchronized by the SSL_CTX lock, but an
application may wish to log keys from multiple SSL_CTXs. This is in
preparation for switching Chromium to use a separate SSL_CTX per profile
to more naturally split up the session caches.
It will also be useful for routing up SSLKEYLOGFILE in WebRTC. There,
each log line must be converted to an IPC up from the renderer
processes.
This will require changes in Chromium when we roll BoringSSL.
BUG=458365,webrtc:4417
Change-Id: I2945bdb4def0a9c36e751eab3d5b06c330d66b54
Reviewed-on: https://boringssl-review.googlesource.com/6514
Reviewed-by: Adam Langley <agl@google.com>
Without |EC_POINTs_mul|, there's never more than one variable point
passed to a |EC_METHOD|'s |mul| method. This allows them to be
simplified considerably. In this commit, the p256-x86_64 implementation
has been simplified to eliminate the heap allocation and looping
related that was previously necessary to deal with the possibility of
there being multiple input points. The other implementations were left
mostly as-is; they should be similarly simplified in the future.
Change-Id: I70751d1d5296be2562af0730e7ccefdba7a1acae
Reviewed-on: https://boringssl-review.googlesource.com/6493
Reviewed-by: Adam Langley <agl@google.com>
This moves us closer to having |EC_GROUP| and |EC_KEY| being immutable.
The functions are left as no-ops for backward compatibility.
Change-Id: Ie23921ab0364f0771c03aede37b064804c9f69e0
Reviewed-on: https://boringssl-review.googlesource.com/6485
Reviewed-by: Adam Langley <agl@google.com>
If -mfpu=neon is passed then we don't need to worry about checking for
NEON support at run time. This change allows |CRYPTO_is_NEON_capable| to
statically return 1 in this case. This then allows the compiler to
discard generic code in several cases.
Change-Id: I3b229740ea3d5cb0a304f365c400a0996d0c66ef
Reviewed-on: https://boringssl-review.googlesource.com/6523
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3072f884be77b8646e90d316154b96448f0cf2a1
Reviewed-on: https://boringssl-review.googlesource.com/6520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
So long as we're not getting rid of them (the certificate variants may
be useful when we decouple from crypto/x509 anyway), get the types and
bounds checks right.
Also reject trailing data and require the input be a single element.
Note: this is a slight compatibility risk, but we did it for
SSL*_use_RSAPrivateKey_ASN1 previously and I think it's probably worth
seeing if anything breaks here.
Change-Id: I64fa3fc6249021ccf59584d68e56ff424a190082
Reviewed-on: https://boringssl-review.googlesource.com/6490
Reviewed-by: Adam Langley <agl@google.com>
OpenSSH calls |RAND_seed| before jailing in the expectation that that
will be sufficient to ensure that later RAND calls are successful.
See internal bug 25695426.
Change-Id: I9d3f5665249af6610328ac767cb83059bb2953dd
Reviewed-on: https://boringssl-review.googlesource.com/6494
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
dh.c had a 10k-bit limit but it wasn't quite correctly enforced. However,
that's still 1.12s of jank on the IO thread, which is too long. Since the SSL
code consumes DHE groups from the network, it should be responsible for
enforcing what sanity it needs on them.
Costs of various bit lengths on 2013 Macbook Air:
1024 - 1.4ms
2048 - 14ms
3072 - 24ms
4096 - 55ms
5000 - 160ms
10000 - 1.12s
UMA says that DHE groups are 0.2% 4096-bit and otherwise are 5.5% 2048-bit and
94% 1024-bit and some noise. Set the limit to 4096-bit to be conservative,
although that's already quite a lot of jank.
BUG=554295
Change-Id: I8e167748a67e4e1adfb62d73dfff094abfa7d215
Reviewed-on: https://boringssl-review.googlesource.com/6464
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
I've used these defines to easy the update of BoringSSL in Android
because Android's external/boringssl is a different git repository from
the rest of Android and thus it's not possible to land changes the
atomically update several things at once.
For this I tended just to add this define in the Android copy of
BoringSSL, but we're starting to see that bleed into other situations
now so it's looking like this will be generally useful.
These defines may be added when useful but shouldn't build up: once the
change has been done, the #if'ed code elsewhere that uses it should be
cleaned up. So far, that's worked ok. (I.e. we've had a BORINGSSL_201509
that correctly disappeared.)
Change-Id: I8cbb4731efe840cc798c970d37bc040b16a4a755
Reviewed-on: https://boringssl-review.googlesource.com/6442
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Not sure if we want to leave bio.h and bytestring.h's instance as-is, but the
evp.h ones are just baffling.
Change-Id: I485c2e355ba93764da0c4c72c48af48b055a8500
Reviewed-on: https://boringssl-review.googlesource.com/6454
Reviewed-by: Adam Langley <agl@google.com>
Most functions can take this in as const. Note this changes an
RSA_METHOD hook, though one I would not expect anyone to override.
Change-Id: Ib70ae65e5876b01169bdc594e465e3e3c4319a8b
Reviewed-on: https://boringssl-review.googlesource.com/6419
Reviewed-by: Adam Langley <agl@google.com>
Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
This removes a sharp corner in the API where |ECDH_compute_key| assumed
that callers were either using ephemeral keys, or else had already
checked that the public key was on the curve.
A public key that's not on the curve can be in a small subgroup and thus
the result can leak information about the private key.
This change causes |EC_POINT_set_affine_coordinates_GFp| to require that
points are on the curve. |EC_POINT_oct2point| already does this.
Change-Id: I77d10ce117b6efd87ebb4a631be3a9630f5e6636
Reviewed-on: https://boringssl-review.googlesource.com/5861
Reviewed-by: Adam Langley <agl@google.com>
This change fixes up several comments (many of which were spotted by
Kenny Root) and also changes doc.go to detect cases where comments don't
start with the correct word. (This is a common error.)
Since we have docs builders now, these errors will be found
automatically in the future.
Change-Id: I58c6dd4266bf3bd4ec748763c8762b1a67ae5ab3
Reviewed-on: https://boringssl-review.googlesource.com/6440
Reviewed-by: Adam Langley <agl@google.com>
This function allows one to extract the current IVs from an SSL
connection. This is needed for the CBC cipher suites with implicit IVs
because, for those, the IV can't be extracted from the handshake key
material.
Change-Id: I247a1d0813b7a434b3cfc88db86d2fe8754344b6
Reviewed-on: https://boringssl-review.googlesource.com/6433
Reviewed-by: Adam Langley <agl@google.com>
They run through completely different logic as only handshake is fragmented.
This'll make it easier to rewrite the handshake logic in a follow-up.
Change-Id: I9515feafc06bf069b261073873966e72fcbe13cb
Reviewed-on: https://boringssl-review.googlesource.com/6420
Reviewed-by: Adam Langley <agl@google.com>
The documentation in md32_common.h is now (more) correct with respect
to the most important details of the layout of |HASH_CTX|. The
documentation explaining why sha512.c doesn't use md32_common.h is now
more accurate as well.
Before, the C implementations of HASH_BLOCK_DATA_ORDER took a pointer
to the |HASH_CTX| and the assembly language implementations took a
pointer to the hash state |h| member of |HASH_CTX|. (This worked
because |h| is always the first member of |HASH_CTX|.) Now, the C
implementations take a pointer directly to |h| too.
The definitions of |MD4_CTX|, |MD5_CTX|, and |SHA1_CTX| were changed to
be consistent with |SHA256_CTX| and |SHA512_CTX| in storing the hash
state in an array. This will break source compatibility with any
external code that accesses the hash state directly, but will not
affect binary compatibility.
The second parameter of |HASH_BLOCK_DATA_ORDER| is now of type
|const uint8_t *|; previously it was |void *| and all implementations
had a |uint8_t *data| variable to access it as an array of bytes.
This change paves the way for future refactorings such as automatically
generating the |*_Init| functions and/or sharing one I-U-F
implementation across all digest algorithms.
Change-Id: I6e9dd09ff057c67941021d324a4fa1d39f58b0db
Reviewed-on: https://boringssl-review.googlesource.com/6405
Reviewed-by: Adam Langley <agl@google.com>
Although those are only created by code owned by RSA_METHOD, custom RSA_METHODs
shouldn't be allowed to squat our internal fields and then change how you free
things.
Remove 'method' from their names now that they're not method-specific.
Change-Id: I9494ef9a7754ad59ac9fba7fd463b3336d826e0b
Reviewed-on: https://boringssl-review.googlesource.com/6423
Reviewed-by: Adam Langley <agl@google.com>
This will allow a static linker (with -ffunction-sections since things aren't
split into files) to drop unused parts of DH and DSA. Notably, the parameter
generation bits pull in primality-checking code.
Change-Id: I25087e4cb91bc9d0ab43bcb267c2e2c164e56b59
Reviewed-on: https://boringssl-review.googlesource.com/6388
Reviewed-by: Adam Langley <agl@google.com>
Removing the function codes continued to sample __func__ for compatibility with
ERR_print_errors_cb, but not ERR_error_string_n. We can just emit
OPENSSL_internal for both. ERR_print_errors_cb already has the file and line
number available which is strictly more information than the function name.
(ERR_error_string_n does not, but we'd already turned that to
OPENSSL_internal.)
This shaves 100kb from a release build of the bssl tool.
In doing so, put an unused function code parameter back into ERR_put_error to
align with OpenSSL. We don't need to pass an additional string in anymore, so
OpenSSL compatibility with anything which uses ERR_LIB_USER or
ERR_get_next_error_library costs nothing. (Not that we need it.)
Change-Id: If6af34628319ade4145190b6f30a0d820e00b20d
Reviewed-on: https://boringssl-review.googlesource.com/6387
Reviewed-by: Adam Langley <agl@google.com>
This option causes clients to ignore HelloRequest messages completely.
This can be suitable in cases where a server tries to perform concurrent
application data and handshake flow, e.g. because they are trying to
“renew” symmetric keys.
Change-Id: I2779f7eff30d82163f2c34a625ec91dc34fab548
Reviewed-on: https://boringssl-review.googlesource.com/6431
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The documentation in md32_common.h is now (more) correct with respect
to the most important details of the layout of |HASH_CTX|. The
documentation explaining why sha512.c doesn't use md32_common.h is now
more accurate as well.
Before, the C implementations of HASH_BLOCK_DATA_ORDER took a pointer
to the |HASH_CTX| and the assembly language implementations tool a
pointer to the hash state |h| member of |HASH_CTX|. (This worked
because |h| is always the first member of |HASH_CTX|.) Now, the C
implementations take a pointer directly to |h| too.
The definitions of |MD4_CTX|, |MD5_CTX|, and |SHA1_CTX| were changed to
be consistent with |SHA256_CTX| and |SHA512_CTX| in storing the hash
state in an array. This will break source compatibility with any
external code that accesses the hash state directly, but will not
affect binary compatibility.
The second parameter of |HASH_BLOCK_DATA_ORDER| is now of type
|const uint8_t *|; previously it was |void *| and all implementations
had a |uint8_t *data| variable to access it as an array of bytes.
This change paves the way for future refactorings such as automatically
generating the |*_Init| functions and/or sharing one I-U-F
implementation across all digest algorithms.
Change-Id: I30513bb40b5f1d2c8932551d54073c35484b3f8b
Reviewed-on: https://boringssl-review.googlesource.com/6401
Reviewed-by: Adam Langley <agl@google.com>
BN_mod_exp_mont_consttime does not modify its |BN_MONT_CTX| so that
value should be const.
Change-Id: Ie74e48eec8061899fd056fbd99dcca2a86b02cad
Reviewed-on: https://boringssl-review.googlesource.com/6403
Reviewed-by: Adam Langley <agl@google.com>
Although the DTLS transport layer logic drops failed writes on the floor, it is
actually set up to work correctly. If an SSL_write fails at the transport,
dropping the buffer is fine. Arguably it works better than in TLS because we
don't have the weird "half-committed to data" behavior. Likewise, the handshake
keeps track of how far its gotten and resumes the message at the right point.
This broke when the buffering logic was rewritten because I didn't understand
what the DTLS code was doing. The one thing that doesn't work as one might
expect is non-fatal write errors during rexmit are not recoverable. The next
timeout must fire before we try again.
This code is quite badly sprinkled in here, so add tests to guard it against
future turbulence. Because of the rexmit issues, the tests need some hacks
around calls which may trigger them. It also changes the Go DTLS implementation
from being completely strict about sequence numbers to only requiring they be
monotonic.
The tests also revealed another bug. This one seems to be upstream's fault, not
mine. The logic to reset the handshake hash on the second ClientHello (in the
HelloVerifyRequest case) was a little overenthusiastic and breaks if the
ClientHello took multiple tries to send.
Change-Id: I9b38b93fff7ae62faf8e36c4beaf848850b3f4b9
Reviewed-on: https://boringssl-review.googlesource.com/6417
Reviewed-by: Adam Langley <agl@google.com>
This is a fairly timid, first step at trying to pack common structures a
little better.
This change reorders a couple of structures a little and turns some
variables into bit-fields. Much more can still be done.
Change-Id: Idbe0f54d66559c0ad654bf7e8dea277a771a568f
Reviewed-on: https://boringssl-review.googlesource.com/6394
Reviewed-by: Adam Langley <agl@google.com>
QUIC code references the TXT macro. Also get rid of
TLS1_TXT_DHE_RSA_WITH_CHACHA20_POLY1305 which wasn't renamed for some reason.
Change-Id: I0308e07104b3cec394d748f3f1146bd786d2ace2
Reviewed-on: https://boringssl-review.googlesource.com/6384
Reviewed-by: Adam Langley <agl@google.com>
WebRTC can't roll into Chromium without picking up the iOS build fix, but we
can't roll BoringSSL forwards because WebRTC also depends on the previously
exposed ChaCha20-Poly1305 cipher suite constants.
Define the old constants again.
Change-Id: If8434a0317e42b3aebe1bc1c5a58ed97a89a0230
Reviewed-on: https://boringssl-review.googlesource.com/6382
Reviewed-by: Adam Langley <agl@google.com>
EVP_aead_chacha20_poly1305_old is listed twice instead of
EVP_aead_chacha20_poly1305.
Change-Id: I281eee7a8359cd2a2b04047c829ef351ea4a7b82
Reviewed-on: https://boringssl-review.googlesource.com/6381
Reviewed-by: Adam Langley <agl@google.com>
The other codepath is Linux-specific. This should get tidied up a bit but, in
the meantime, fix the Chromium iOS (NO_ASM) build. Even when the assembly gets
working, it seems iOS prefers you make fat binaries rather than detect features
at runtime, so this is what we want anyway.
BUG=548539
Change-Id: If19b2e380a96918b07bacc300a3a27b885697b99
Reviewed-on: https://boringssl-review.googlesource.com/6380
Reviewed-by: Adam Langley <agl@google.com>
1. Check for the presence of the private key before allocating or
computing anything.
2. Check the return value of |BN_CTX_get|.
3. Don't bother computing the Y coordinate since it is not used.
4. Remove conditional logic in cleanup section.
Change-Id: I4d8611603363c7e5d16a8e9f1d6c3a56809f27ae
Reviewed-on: https://boringssl-review.googlesource.com/6171
Reviewed-by: Adam Langley <alangley@gmail.com>
These functions ultimately return the result of |BN_num_bits|, and that
function's return type is |unsigned|. Thus, these functions' return
type should also be |unsigned|.
Change-Id: I2cef63e6f75425857bac71f7c5517ef22ab2296b
Reviewed-on: https://boringssl-review.googlesource.com/6170
Reviewed-by: Adam Langley <alangley@gmail.com>
This came up and I wasn't sure which it was without source-diving.
Change-Id: Ie659096e0f42a7448f81dfb1006c125d292fd7fd
Reviewed-on: https://boringssl-review.googlesource.com/6354
Reviewed-by: Adam Langley <alangley@gmail.com>
QUIC has a complex relationship with BoringSSL owing to it living both
in Chromium and the Google-internal repository. In order for it to
handle the ChaCha20-Poly1305 AEAD switch more easily this change gives
the unsuffixed name to the old AEAD, for now.
Once QUIC has moved to the “_old” version the unsuffixed name can be
given to the new version.
Change-Id: Id8a77be6e3fe2358d78e022413fe088e5a274dca
Reviewed-on: https://boringssl-review.googlesource.com/6361
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <alangley@gmail.com>
This change reduces unnecessary copying and makes the pre-RFC-7539
nonces 96 bits just like the AES-GCM, AES-CCM, and RFC 7539
ChaCha20-Poly1305 cipher suites. Also, all the symbols related to
the pre-RFC-7539 cipher suites now have "_OLD" appended, in
preparation for adding the RFC 7539 variants.
Change-Id: I1f85bd825b383c3134df0b6214266069ded029ae
Reviewed-on: https://boringssl-review.googlesource.com/6103
Reviewed-by: Adam Langley <alangley@gmail.com>
The new function |CRYPTO_chacha_96_bit_nonce_from_64_bit_nonce| can be
used to adapt code from that uses 64 bit nonces, in a way that is
compatible with the old semantics.
Change-Id: I83d5b2d482e006e82982f58c9f981e8078c3e1b0
Reviewed-on: https://boringssl-review.googlesource.com/6100
Reviewed-by: Adam Langley <alangley@gmail.com>
It seems OS X actually cares about symbol resolution and dependencies
when you create a dylib. Probably because they do two-level name
resolution.
(Obligatory disclaimer: BoringSSL does not have a stable ABI and is thus
not suitable for a traditional system-wide library.)
BUG=539603
Change-Id: Ic26c4ad23840fe6c1f4825c44671e74dd2e33870
Reviewed-on: https://boringssl-review.googlesource.com/6131
Reviewed-by: Adam Langley <alangley@gmail.com>
gcm_test.cc needs to access the internal GCM symbols. This is
unfortunate because it means that they have to be marked OPENSSL_EXPORT
just for this.
To compensate, modes.h is removed and its contents copied into
crypto/modes/internal.h.
Change-Id: I1777b2ef8afd154c43417137673a28598a7ec30e
Reviewed-on: https://boringssl-review.googlesource.com/6360
Reviewed-by: Adam Langley <alangley@gmail.com>
This removes the confusion about whether |gcm128_context| copies the
key (it didn't) or whether the caller is responsible for keeping the
key alive for the lifetime of the |gcm128_context| (it was).
Change-Id: Ia0ad0a8223e664381fbbfb56570b2545f51cad9f
Reviewed-on: https://boringssl-review.googlesource.com/6053
Reviewed-by: Adam Langley <alangley@gmail.com>
The key is never modified through the key pointer member, and the
calling code relies on that fact for maintaining its own
const-correctness.
Change-Id: I63946451aa7c400cd127895a61c30d9a647b1b8c
Reviewed-on: https://boringssl-review.googlesource.com/6040
Reviewed-by: Adam Langley <alangley@gmail.com>
∙ host:port parsing, where unavoidable, is now IPv6-friendly.
∙ |BIO_C_GET_CONNECT| is simply removed.
∙ bssl -accept now listens on both IPv6 and IPv4.
Change-Id: I1cbd8a79c0199bab3ced4c4fd79d2cc5240f250c
Reviewed-on: https://boringssl-review.googlesource.com/6214
Reviewed-by: Adam Langley <alangley@gmail.com>
Right whether NPN is advertised can only be configured globally on the SSL_CTX.
Rather than adding two pointers to each SSL*, add an options bit to disable it
so we may plumb in a field trial to disable NPN.
Chromium wants to be able to route a bit in to disable NPN, but it uses SSL_CTX
incorrectly and has a global one, so it can't disconnect the callback. (That
really needs to get fixed. Although it's not clear this necessarily wants to be
lifted up to SSL_CTX as far as Chromium's SSLClientSocket is concerned since
NPN doesn't interact with the session cache.)
BUG=526713
Change-Id: I49c86828b963eb341c6ea6a442557b7dfa190ed3
Reviewed-on: https://boringssl-review.googlesource.com/6351
Reviewed-by: Adam Langley <alangley@gmail.com>
One less exported function. Nothing ever stack-allocates them, within BoringSSL
or in consumers. This avoids the slightly odd mechanism where BN_MONT_CTX_free
might or might not free the BN_MONT_CTX itself based on a flag.
(This is also consistent with OpenSSL 1.1.x which does away with the _init
variants of both this and BIGNUM so it shouldn't be a compatibility concern
long-term either.)
Change-Id: Id885ae35a26f75686cc68a8aa971e2ea6767ba88
Reviewed-on: https://boringssl-review.googlesource.com/6350
Reviewed-by: Adam Langley <alangley@gmail.com>
The internal session cache is keyed on session ID, so this is completely
useless for clients (indeed we never look it up internally). Along the way,
tidy up ssl_update_cache to be more readable. The slight behavior change is
that SSL_CTX_add_session's return code no longer controls the external
callback. It's not clear to me what that could have accomplished. (It can only
fail on allocation error. We only call it for new sessions, so the duplicate
case is impossible.)
The one thing of value the internal cache might have provided is managing the
timeout. The SSL_CTX_flush_sessions logic would flip the not_resumable bit and
cause us not to offer expired sessions (modulo SSL_CTX_flush_sessions's delay
and any discrepancies between the two caches). Instead, just check expiration
when deciding whether or not to offer a session.
This way clients that set SSL_SESS_CACHE_CLIENT blindly don't accidentally
consume gobs of memory.
BUG=531194
Change-Id: If97485beab21874f37737edc44df24e61ce23705
Reviewed-on: https://boringssl-review.googlesource.com/6321
Reviewed-by: Adam Langley <alangley@gmail.com>
In doing so, fix the documentation for SSL_CTX_add_session and
SSL_CTX_remove_session. I misread the code and documented the behavior
on session ID collision wrong.
Change-Id: I6f364305e1f092b9eb0b1402962fd04577269d30
Reviewed-on: https://boringssl-review.googlesource.com/6319
Reviewed-by: Adam Langley <alangley@gmail.com>
A random 32-byte (so 256-bit) session ID is never going to collide with
an existing one. (And, if it does, SSL_CTX_add_session does account for
this, so the server won't explode. Just attempting to resume some
session will fail.)
That logic didn't completely work anyway as it didn't account for
external session caches or multiple connections picking the same ID in
parallel (generation and insertion happen at different times) or
multiple servers sharing one cache. In theory one could fix this by
passing in a sufficiently clever generate_session_id, but no one does
that.
I found no callers of these functions, so just remove them altogether.
Change-Id: I8500c592cf4676de6d7194d611b99e9e76f150a7
Reviewed-on: https://boringssl-review.googlesource.com/6318
Reviewed-by: Adam Langley <alangley@gmail.com>
Private structs shouldn't be shown. Also there's a few sections that are
really more implementation details than anything else.
Change-Id: Ibc5a23ba818ab0531d9c68e7ce348f1eabbcd19a
Reviewed-on: https://boringssl-review.googlesource.com/6313
Reviewed-by: Adam Langley <alangley@gmail.com>
Although Chromium actually uses SSL_(get_)state as part of its fallback
reason heuristic, that function really should go in the deprecated
bucket. I kept SSL_state_string_long since having a human-readable
string is probably useful for logging.
SSL_set_SSL_CTX was only half-documented as the behavior of this
function is very weird. This warrants further investigation and
rethinking.
SSL_set_shutdown is absurd. I added an assert to trip up clearing bits
and set it to a bitwise OR since clearing bits may mess up the state
machine. Otherwise there's enough consumers and it's not quite the same
as SSL_CTX_set_quiet_shutdown that I've left it alone for now.
Change-Id: Ie35850529373a5a795f6eb04222668ff76d84aaa
Reviewed-on: https://boringssl-review.googlesource.com/6312
Reviewed-by: Adam Langley <alangley@gmail.com>
It just calls CRYPTO_library_init and doesn't do anything else. If
anything, I'd like to make CRYPTO_library_init completely go away too.
We have CRYPTO_once now, so I think it's safe to assume that, if ssl/
ever grows initialization needs beyond that of crypto/, we can hide it
behind a CRYPTO_once and not burden callers.
Change-Id: I63dc362e0e9e98deec5516f4620d1672151a91b6
Reviewed-on: https://boringssl-review.googlesource.com/6311
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL_in_connect_init and SSL_in_accept_init are removed as they're unused
both within the library and externally. They're also kind of silly.
Expand on how False Start works at the API level in doing so.
Change-Id: Id2a8e34b5bb8f28329e3b87b4c64d41be3f72410
Reviewed-on: https://boringssl-review.googlesource.com/6310
Reviewed-by: Adam Langley <alangley@gmail.com>
They were since added to crypto.h and implemented in the library proper.
Change-Id: Idaa2fe2d9b213e67cf7ef61ff8bfc636dfa1ef1f
Reviewed-on: https://boringssl-review.googlesource.com/6309
Reviewed-by: Adam Langley <alangley@gmail.com>
They're really not all that helpful, considering they're each used
exactly once. They're also confusing as it is ALMOST the case that
SSL_TXT_FOO expands to "FOO", but SSL_TXT_AES_GCM expand "AESGCM" and
the protocol versions have lowercase v's and dots.
Change-Id: If78ad8edb0c024819219f61675c60c2a7f3a36b0
Reviewed-on: https://boringssl-review.googlesource.com/6307
Reviewed-by: Adam Langley <alangley@gmail.com>
This callback is some combination of arguably useful stuff (bracket
handshakes, alerts) and completely insane things (find out when the
state machine advances). Deprecate the latter.
Change-Id: Ibea5b32cb360b767b0f45b302fd5f1fe17850593
Reviewed-on: https://boringssl-review.googlesource.com/6305
Reviewed-by: Adam Langley <alangley@gmail.com>
Also clean up the code slightly.
Change-Id: I066a389242c46cdc7d41b1ae9537c4b7716c92a2
Reviewed-on: https://boringssl-review.googlesource.com/6302
Reviewed-by: Adam Langley <alangley@gmail.com>
Like tls1.h, ssl3.h is now just a bundle of protocol constants.
Hopefully we can opaquify this struct in due time, but for now it's
still public.
Change-Id: I68366eb233702e149c92e21297f70f8a4a45f060
Reviewed-on: https://boringssl-review.googlesource.com/6300
Reviewed-by: Adam Langley <alangley@gmail.com>
This dates all the way to SSLeay 0.9.0b. At this point the
application/handshake interleave logic in ssl3_read_bytes was already
present:
((
(s->state & SSL_ST_CONNECT) &&
(s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
(s->state <= SSL3_ST_CR_SRVR_HELLO_A)
) || (
(s->state & SSL_ST_ACCEPT) &&
(s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
(s->state >= SSL3_ST_SR_CLNT_HELLO_A)
)
The comment is attached to SSL3_ST_SR_CLNT_HELLO_A, so I suspect this is
what it was about. This logic is gone now, so let's remove that scary
warning.
Change-Id: I45f13b53b79e35d80e6074b0942600434deb0684
Reviewed-on: https://boringssl-review.googlesource.com/6299
Reviewed-by: Adam Langley <alangley@gmail.com>
Now tls1.h is just a pile of protocol constants with no more circular
dependency problem.
I've preserved SSL_get_servername's behavior where it's simultaneously a
lookup of handshake state and local configuration. I've removed it from
SSL_get_servername_type. It got the logic wrong anyway with the order of
the s->session check.
(Searching through code, neither is used on the client, but the
SSL_get_servername one is easy.)
Change-Id: I61bb8fb0858b07d76a7835bffa6dc793812fb027
Reviewed-on: https://boringssl-review.googlesource.com/6298
Reviewed-by: Adam Langley <alangley@gmail.com>
Some ARM environments don't support |getauxval| or signals and need to
configure the capabilities of the chip at compile time. This change adds
defines that allow them to do so.
Change-Id: I4e6987f69dd13444029bc7ac7ed4dbf8fb1faa76
Reviewed-on: https://boringssl-review.googlesource.com/6280
Reviewed-by: Adam Langley <agl@google.com>
SSL_alert_desc_string_long was kept in the undeprecated bucket and one missing
alert was added. We have some uses and it's not completely ridiculous for
logging purposes.
The two-character one is ridiculous though and gets turned into a stub
that returns a constant string ("!" or "!!") because M2Crypto expects
it.
Change-Id: Iaf8794b5d953630216278536236c7113655180af
Reviewed-on: https://boringssl-review.googlesource.com/6297
Reviewed-by: Adam Langley <alangley@gmail.com>
(Documentation/deprecation will come in later commits.)
Change-Id: I3aba26e32b2e47a1afb5cedd44d09115fc193bce
Reviewed-on: https://boringssl-review.googlesource.com/6296
Reviewed-by: Adam Langley <alangley@gmail.com>
The only reason you'd want it is to tls_unique, and we have a better API
for that. (It has one caller and that is indeed what that caller uses it
for.)
Change-Id: I39f8e353f56f18becb63dd6f7205ad31f4192bfd
Reviewed-on: https://boringssl-review.googlesource.com/6295
Reviewed-by: Adam Langley <alangley@gmail.com>
This is redundant with SSL_get_error. Neither is very good API, but
SSL_get_error is more common. SSL_get_error also takes a return code
which makes it harder to accidentally call it at some a point other than
immediately after an operation. (Any other point is confusing since you
can have SSL_read and SSL_write operations going on in parallel and
they'll get mixed up.)
Change-Id: I5818527c30daac28edb552c6c550c05c8580292d
Reviewed-on: https://boringssl-review.googlesource.com/6294
Reviewed-by: Adam Langley <alangley@gmail.com>
It's pretty clearly pointless to put in the public header.
Change-Id: I9527aba09b618f957618e653c4f2ae379ddd0fdb
Reviewed-on: https://boringssl-review.googlesource.com/6293
Reviewed-by: Adam Langley <alangley@gmail.com>
Also added a SSL_CTX_set_select_certificate_cb setter for
select_certificate_cb so code needn't access SSL_CTX directly. Plus it
serves as a convenient anchor for the documentation.
Change-Id: I23755b910e1d77d4bea7bb9103961181dd3c5efe
Reviewed-on: https://boringssl-review.googlesource.com/6291
Reviewed-by: Adam Langley <alangley@gmail.com>
These are theh two remaining quirks (SSL_OP_LEGACY_SERVER_CONNECT
aside). Add counters so we can determine whether there are still clients
that trip up these cases.
Change-Id: I7e92f42f3830c1df675445ec15a852e5659eb499
Reviewed-on: https://boringssl-review.googlesource.com/6290
Reviewed-by: Adam Langley <alangley@gmail.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
This extends 79c59a30 to |RSA_public_encrypt|, |RSA_private_encrypt|,
and |RSA_public_decrypt|. It benefits Conscrypt, which expects these
functions to have the same signature as |RSA_public_private_decrypt|.
Change-Id: Id1ce3118e8f20a9f43fd4f7bfc478c72a0c64e4b
Reviewed-on: https://boringssl-review.googlesource.com/6286
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's missing fields and no one ever calls it.
Change-Id: I450edc1e29bb48edffb5fd3df8da19a03e4185ce
Reviewed-on: https://boringssl-review.googlesource.com/5821
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's bf0fc41266f17311c5db1e0541d3dd12eb27deb6.
Change-Id: Ib692b0ad608f2e3291f2aeab2ad98a7e177d5851
Reviewed-on: https://boringssl-review.googlesource.com/6150
Reviewed-by: Adam Langley <agl@google.com>
Grouping along two axes is weird. Doesn't hugely matter which one, but
we should be consistent.
Change-Id: I80fb04d3eff739c08fda29515ce81d101d8542cb
Reviewed-on: https://boringssl-review.googlesource.com/6120
Reviewed-by: Adam Langley <agl@google.com>
The caller obligations for retransmit are messy, so I've peppered a few
other functions with mentions of it. There's only three functions, so
they're lumped in with the other core functions. They're irrelevant for
TLS, but important for DTLS.
Change-Id: Ifc995390952eef81370b58276915dcbe4fc7e3b5
Reviewed-on: https://boringssl-review.googlesource.com/6093
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the client_cert_cb variant since you can't really configure
intermediates with it. (You might be able to by configuring the
intermediates without the leaf or key and leaving the SSL stack to
configure those, but that's really weird. cert_cb is simpler.)
Also document the two functions the callbacks may use to query the
CertificateRequest on the client.
Change-Id: Iad6076266fd798cd74ea4e09978e7f5df5c8a670
Reviewed-on: https://boringssl-review.googlesource.com/6092
Reviewed-by: Adam Langley <agl@google.com>
It doesn't actually do anything.
Change-Id: I8a5748dc86b842406cc656a5b251e1a7c0092377
Reviewed-on: https://boringssl-review.googlesource.com/6090
Reviewed-by: Adam Langley <alangley@gmail.com>
Reviewed-by: Adam Langley <agl@google.com>
Add a slightly richer API. Notably, one can configure ssl_renegotiate_once to
only accept the first renego.
Also, this API doesn't repeat the mistake I made with
SSL_set_reject_peer_renegotiations which is super-confusing with the negation.
Change-Id: I7eb5d534e3e6c553b641793f4677fe5a56451c71
Reviewed-on: https://boringssl-review.googlesource.com/6221
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's BIO_get_fd returns the fd or -1, not a boolean.
Change-Id: I12a3429c71bb9c9064f9f91329a88923025f1fb5
Reviewed-on: https://boringssl-review.googlesource.com/6080
Reviewed-by: Adam Langley <agl@google.com>
This utility function is provided for API-compatibility and simply calls
|PKCS12_parse| internally.
BUG=536939
Change-Id: I86c548e5dfd64b6c473e497b95adfa5947fe9529
Reviewed-on: https://boringssl-review.googlesource.com/6008
Reviewed-by: Adam Langley <agl@google.com>
Somehow we ended up with duplicate 'Deprecated functions' sections.
PKCS12_get_key_and_certs ended up in one of them was probably an oversight.
Change-Id: Ia6d6a44132cb2730ee1f92a6bbcfa8ce168e7d08
Reviewed-on: https://boringssl-review.googlesource.com/6020
Reviewed-by: Adam Langley <agl@google.com>
I put an extra space in there. Also document ownership and return value.
Change-Id: I0635423be7774a7db54dbf638cc548d291121529
Reviewed-on: https://boringssl-review.googlesource.com/6010
Reviewed-by: Adam Langley <agl@google.com>
Also add an assert to that effect.
Change-Id: I1bd0571e3889f1cba968fd99041121ac42ee9e89
Reviewed-on: https://boringssl-review.googlesource.com/5990
Reviewed-by: Adam Langley <agl@google.com>
Putting it at the top was probably a mistake? Even though SSL_CIPHER
(like SSL_SESSION) doesn't depend on SSL, if you're reading through the
header, SSL_CTX and SSL are the most important types. You could even use
the library without touch cipher suite configs if you don't care since
the default is decently reasonable, though it does include a lot of
ciphers. (Hard to change that if we wanted to because DEFAULT is often
used somewhat like ALL and then people subtract from it.)
Change-Id: Ic9ddfc921858f7a4c141972fe0d1e465ca196b9d
Reviewed-on: https://boringssl-review.googlesource.com/5963
Reviewed-by: Adam Langley <agl@google.com>
The cipher suite rules could also be anchored on SSL_TXT_* if desired. I
currently documented them in prose largely because SSL_TXT_* also
defines protocol version strings and those are weird; SSL_TXT_TLSV1_1
isn't even a cipher rule. (And, in fact, those are the only SSL_TXT_*
macros that we can't blindly remove. I found some code that #ifdef's the
version SSL_TXT_* macros to decide if version-locked SSL_METHODs are
available.)
Also they clutter the header. I was thinking maybe we should dump a lot
of the random constants into a separate undocumented header or perhaps
just unexport them.
I'm slightly torn on this though and could easily be convinced in the
other direction. (Playing devil's advocate, anchoring on SSL_TXT_* means
we're less likely to forget to document one so long as adding a
SSL_TXT_* macro is the convention.)
Change-Id: Ide2ae44db9d6d8f29c24943090c210da0108dc37
Reviewed-on: https://boringssl-review.googlesource.com/5962
Reviewed-by: Adam Langley <agl@google.com>
This mirrors how the server halves fall under configuring certificates.
Change-Id: I9bde85eecfaff6487eeb887c88cb8bb0c36b83d8
Reviewed-on: https://boringssl-review.googlesource.com/5961
Reviewed-by: Adam Langley <agl@google.com>
The IUF functions were added for PEM and internally are very lenient to
whitespace and include other PEM-specific behaviors (notably they treat
hyphens as EOF). They also decode a ton of invalid input (see upstream's
RT #3757).
Upstream has a rewrite with tests that resolves the latter issue which
we should review and import. But this is still a very PEM-specific
interface. As this code has basically no callers outside the PEM code
(and any such callers likely don't want a PEM-specific API), it's
probably not worth the trouble to massage this and PEM into a strict IUF
base64 API with PEM whitespace and hyphen bits outside. Just deprecate
it all and leave it in a corner.
Change-Id: I5b98111e87436e287547829daa65e9c1efc95119
Reviewed-on: https://boringssl-review.googlesource.com/5952
Reviewed-by: Adam Langley <agl@google.com>
∙ Some comments had the wrong function name at the beginning.
∙ Some ARM asm ended up with two #if defined(__arm__) lines – one from
the .pl file and one inserted by the translation script.
Change-Id: Ia8032cd09f06a899bf205feebc2d535a5078b521
Reviewed-on: https://boringssl-review.googlesource.com/6000
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ie75c68132fd501549b2ad5203663f6e99867eed6
Reviewed-on: https://boringssl-review.googlesource.com/5970
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The |z| value should be 0x04 not 0x02
RT#3838
(Imported from upstream's 41fe7d2380617da515581503490f1467ee75a521.)
Change-Id: I35745cd2a5a32bd726cb4d3c0613cef2bcbef35b
Reviewed-on: https://boringssl-review.googlesource.com/5946
Reviewed-by: Adam Langley <agl@google.com>
Or at least group them together and make a passing attempt to document
them. The legacy X.509 stack itself remains largely untouched and most
of the parameters have to do with it.
Change-Id: I9e11e2ad1bbeef53478c787344398c0d8d1b3876
Reviewed-on: https://boringssl-review.googlesource.com/5942
Reviewed-by: Adam Langley <agl@google.com>
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
Not content with signing negative RSA moduli, still other Estonian IDs have too
many leading zeros. Work around those too.
This workaround will be removed in six months.
BUG=534766
Change-Id: Ica23b1b1499f9dbe39e94cf7b540900860e8e135
Reviewed-on: https://boringssl-review.googlesource.com/5980
Reviewed-by: Adam Langley <agl@google.com>
We wish to be able to detect the use of RC4 so that we can flag it and
investigate before it's disabled.
Change-Id: I6dc3a5d2211b281097531a43fadf08edb5a09646
Reviewed-on: https://boringssl-review.googlesource.com/5930
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Get them out of the way when reading through the header.
Change-Id: Ied3f3601262e74570769cb7f858dcff4eff44813
Reviewed-on: https://boringssl-review.googlesource.com/5898
Reviewed-by: Adam Langley <agl@google.com>
Existing documentation was moved to the header, very slightly tweaked.
Change-Id: Ife3c2351e2d7e6a335854284f996918039414446
Reviewed-on: https://boringssl-review.googlesource.com/5897
Reviewed-by: Adam Langley <agl@google.com>
These were already documented, though some of the documentation was
expanded on slightly.
Change-Id: I04c6276a83a64a03ab9cce9b9c94d4dea9ddf638
Reviewed-on: https://boringssl-review.googlesource.com/5896
Reviewed-by: Adam Langley <agl@google.com>
All these functions were already documented, just not grouped. I put
these above DTLS-SRTP and PSK as they're considerably less niche of
features.
Change-Id: I610892ce9763fe0da4f65ec87e5c7aaecb10388b
Reviewed-on: https://boringssl-review.googlesource.com/5895
Reviewed-by: Adam Langley <agl@google.com>
Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
This gets the documentation into the ssl.h documentation, and removes
one of the circularly-dependent headers hanging off ssl.h. Also fixes
some typos; there were a few instances of "SSL *ctx".
Change-Id: I2a41c6f518f4780af84d468ed220fe7b0b8eb0d3
Reviewed-on: https://boringssl-review.googlesource.com/5883
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
To be consistent with some of the other headers and because SSL_METHOD
no longer has a place to anchor documentation, move the type
documentation up to the corresponding section headers, rather than
attached to a convenient function.
Also document thread-safety properties of SSL and SSL_CTX.
Change-Id: I7109d704d28dda3f5d83c72d86fe31bc302b816e
Reviewed-on: https://boringssl-review.googlesource.com/5876
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A small handful of functions got a 'Deprecated:' prefix instead in
documentation.
Change-Id: Ic151fb7d797514add66bc6465b6851b666a471bc
Reviewed-on: https://boringssl-review.googlesource.com/5825
Reviewed-by: Adam Langley <agl@google.com>
We had a few duplicate section names.
Change-Id: I0c9b2a1669ac14392fd577097d5ee8dd80f7c73c
Reviewed-on: https://boringssl-review.googlesource.com/5824
Reviewed-by: Adam Langley <agl@google.com>
Callers that lack hardware random may obtain a speed improvement by
calling |RAND_enable_fork_unsafe_buffering|, which enables a
thread-local buffer around reads from /dev/urandom.
Change-Id: I46e675d1679b20434dd520c58ece0f888f38a241
Reviewed-on: https://boringssl-review.googlesource.com/5792
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
This is useful to skip an optional element, and mirrors the behaviour of
CBS_get_optional_asn1_octet_string.
Change-Id: Icb538c5e99a1d4e46412cae3c438184a94fab339
Reviewed-on: https://boringssl-review.googlesource.com/5800
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
The handshake state machine is still rather messy (we should switch to CBB,
split the key exchanges apart, and also pull reading and writing out), but this
version makes it more obvious to the compiler that |p| and |sig_len| are
initialized. The old logic created a synchronous-only state which, if enterred
directly, resulted in some variables being uninitialized.
Change-Id: Ia3ac9397d523fe299c50a95dc82a9b26304cea96
Reviewed-on: https://boringssl-review.googlesource.com/5765
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
It's supposed to be void*. The only reason this was working was that it was
only called in C which happily casts from void* to T*. (But if called in C++ in
a macro, it breaks.)
Change-Id: I7f765c3572b9b4815ae58da852be1e742de1bd96
Reviewed-on: https://boringssl-review.googlesource.com/5760
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This consists mostly of re-adding OpenSSL's implementation of PBKDF2
(very loosely based upon e0d26bb3). The meat of it, namely
|PKCS5_PBKDF2_HMAC|, was already present, but unused.
In addition, |PKCS8_encrypt| and |PKCS8_decrypt| must be changed to
not perform UCS-2 conversion in the PBES2 case.
Change-Id: Id170ecabc43c79491600051147d1d6d3c7273dbc
Reviewed-on: https://boringssl-review.googlesource.com/5745
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Match the other stack-allocated types in that we expose a wrapper function to
get them into the zero state. Makes it more amenable to templates like
ScopedOpenSSLContext.
Change-Id: Ibc7b2b1bc0421ce5ccc84760c78c0b143441ab0f
Reviewed-on: https://boringssl-review.googlesource.com/5753
Reviewed-by: Adam Langley <agl@google.com>
This made sense when the cipher might have been standardized as-is, so a
DHE_RSA variant could appease the IETF. Since the standardized variant is going
to have some nonce tweaks anyway, there's no sense in keeping this around. Get
rid of one non-standard cipher suite value early. (Even if they were to be
standardized as-is, it's not clear we should implement new DHE cipher suites at
this point.)
Chrome UMA, unsurprisingly, shows that it's unused.
Change-Id: Id83d73a4294b470ec2e94d5308fba135d6eeb228
Reviewed-on: https://boringssl-review.googlesource.com/5750
Reviewed-by: Adam Langley <agl@google.com>
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: Ifb79e77afb7efed1c329126a1a459bbf7ce6ca00
Reviewed-on: https://boringssl-review.googlesource.com/5725
Reviewed-by: Adam Langley <agl@google.com>
Note that while |DES_ede2_cbc_encrypt| exists, I didn't use it: I
think it's easier to see what's happening this way.
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: I7e17ca0b69067d7b3f4bc213b4616eb269882ae0
Reviewed-on: https://boringssl-review.googlesource.com/5724
Reviewed-by: Adam Langley <agl@google.com>
|DES_ecb_encrypt| was already present.
This benefits globalplatform.
Change-Id: I2ab41eb1936b3026439b5981fb27e29a12672b66
Reviewed-on: https://boringssl-review.googlesource.com/5723
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why one would ever want to externally know the curve list
supported by the server. The API is new as of 1.0.2 and has no callers.
Configuring curves will be much more useful when Curve25519 exists and the API
isn't terribly crazy, so keep that API around and promote it to a real
function.
BUG=404754
Change-Id: Ibd5858791d3dfb30d53dd680cb75b0caddcbb7df
Reviewed-on: https://boringssl-review.googlesource.com/5674
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why I made a separate one. (Not quite how the V2ClientHello
code will look in the buffer-free API yet. Probably the future
refactored SSL_HANDSHAKE gadget will need separate entry points to
consume a handshake message or V2ClientHello and the driver deals with
framing.)
This also means that ssl3_setup_read_buffer is never called external to
ssl3_read_n.
BUG=468889
Change-Id: I872f1188270968bf53ee9d0488a761c772a11e9e
Reviewed-on: https://boringssl-review.googlesource.com/5713
Reviewed-by: Adam Langley <agl@google.com>
BN_bin2bn takes a size_t as it should, but it passes that into bn_wexpand which
takes unsigned. Switch bn_wexpand and bn_expand to take size_t before they
check bounds against INT_MAX.
BIGNUM itself still uses int everywhere and we may want to audit all the
arithmetic at some point. Although I suspect having bn_expand require that the
number of bits fit in an int is sufficient to make everything happy, unless
we're doing interesting arithmetic on the number of bits somewhere.
Change-Id: Id191a4a095adb7c938cde6f5a28bee56644720c6
Reviewed-on: https://boringssl-review.googlesource.com/5680
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
They were removed in the initial fork, but the ctrl macros remained.
BUG=404754
Change-Id: I5b20434faf494c54974a8d9a9df0e87ccf33c414
Reviewed-on: https://boringssl-review.googlesource.com/5670
Reviewed-by: Adam Langley <agl@google.com>
It's not clear why OpenSSL had a union. The comment says something about sizes
of long, since OpenSSL doesn't use stdint.h. But the variable is treated as a
bunch of uint32_t's, not DES_cblocks.
The key schedule is also always used by iterating or indexing into a uint32_t*,
treating the 16 2-word subkeys as a single uint32_t[32]. Instead, index into
them properly shush any picky tools. The compiler should be able to figure out
what's going on and optimize it appropriately.
BUG=517495
Change-Id: I83d0e63ac2c6fb76fac1dceda9f2fd6762074341
Reviewed-on: https://boringssl-review.googlesource.com/5627
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
A memory BIO is internally a BUF_MEM anyway. There's no need to bring
BIO_write into the mix. BUF_MEM is size_t clean.
Change-Id: I4ec6e4d22c72696bf47c95861771013483f75cab
Reviewed-on: https://boringssl-review.googlesource.com/5616
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
We never need to define the actual structs because we always cast them
before use. The types only exist to be distinct, and they can do that
without a definition.
Change-Id: I1e1ca0833b383f3be422675cb7b90dacbaf82acf
Reviewed-on: https://boringssl-review.googlesource.com/5593
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add it to |EVP_get_cipherbynid|, along with |EVP_rc2_40_cbc| and
|EVP_aes_192_cbc|.
Change-Id: Iee7621a91262359d1650684652995884a6cef37a
Reviewed-on: https://boringssl-review.googlesource.com/5590
Reviewed-by: Adam Langley <agl@google.com>
The split was only needed for buffering records. Likewise, the extra
seq_num field is now unnecessary.
This also fixes a bug where dtls1_process_record will push an error on
the queue if the decrypted record is too large, which dtls1_get_record
will ignore but fail to clear, leaving garbage on the error queue. The
error is now treated as fatal; the reason DTLS silently drops invalid
packets is worrying about ease of DoS, but after SSL_AEAD_CTX_open, the
packet has been authenticated. (Unless it's the null cipher, but that's
during the handshake and the handshake is already DoS-able by breaking
handshake reassembly state.)
The function is still rather a mess. Later changes will clean this up.
BUG=468889
Change-Id: I96a54afe0755d43c34456f76e77fc4ee52ad01e3
Reviewed-on: https://boringssl-review.googlesource.com/5557
Reviewed-by: Adam Langley <agl@google.com>
It will end up allowing some misuses of the error API to break silently,
so we're better off without it.
This reverts commit 0fba870578.
Change-Id: I486962c77cb18474ad9eee2acec86b631c99210d
16f774f8bf adds forward declarations for
everything in x509.h, but the typedefs are still in x509.h. Some versions of
clang flag the duplicate typedefs in C code.
Change-Id: Ib6684a238681d8c4fb1f0f91c3a6110013b3f4d6
Reviewed-on: https://boringssl-review.googlesource.com/5580
Reviewed-by: Adam Langley <agl@google.com>
(This is one of the most common errors that callers test for.)
Change-Id: Ic39b8dc6b5551de4a25e8517b9bbedf8a4a94d60
Reviewed-on: https://boringssl-review.googlesource.com/5534
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
MSVC and clang-cl automatically define |_WIN32| but |WIN32| is only
defined if a Windows header file has been included or if -DWIN32 was
passed on the command line. Thus, it is always better to test |_WIN32|
than |WIN32|. The convention in BoringSSL is to test |OPENSSL_WINDOWS|
instead, except for the place where |OPENSSL_WINDOWS| is defined.
Change-Id: Icf3e03958895be32efe800e689d5ed6a2fed215f
Reviewed-on: https://boringssl-review.googlesource.com/5553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called anywhere and doesn't return anything interesting.
Change-Id: I68e7e9cd7b74a72f61092ac5d2b5d2390e55a228
Reviewed-on: https://boringssl-review.googlesource.com/5540
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
These are not in upstream and were probably introduced on accident by stray vim
keystrokes.
Change-Id: I35f51f81fc37e75702e7d8ffc6f040ce71321b54
Reviewed-on: https://boringssl-review.googlesource.com/5490
Reviewed-by: Adam Langley <agl@google.com>
This means e.g. that a caller can say:
RAND_SSLEay()->bytes(...)
and so on. But in exchange for this convenience, I've changed the
signatures to be more BoringSSL-ish (|size_t| instead of |int|).
That's fine; |RAND_set_rand_method(SSLEay())| still works. And by
works I mean "does nothing".
Change-Id: I35479b5efb759da910ce46e22298168b78c9edcf
Reviewed-on: https://boringssl-review.googlesource.com/5472
Reviewed-by: Adam Langley <agl@google.com>
No functional changes but it saves diff noise in other changes in the
future.
Change-Id: Ib8bf43f1d108f6accdc2523db6d0edc5be77ba55
Reviewed-on: https://boringssl-review.googlesource.com/5468
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
It's not DER and always parses the entire thing.
Change-Id: Idb4b8b93d5bc3689d8c3ea34c38b529e50a4af61
Reviewed-on: https://boringssl-review.googlesource.com/5451
Reviewed-by: Adam Langley <agl@google.com>
Rather, take a leaf out of Chromium's book and use MSVC's __cpuid and
_xgetbv built-in, with an inline assembly emulated version for other
compilers.
This preserves the behavior of the original assembly with the following
differences:
- CPUs without cpuid aren't support. Chromium's base/cpu.cc doesn't
check, and SSE2 support is part of our baseline; the perlasm code
is always built with OPENSSL_IA32_SSE2.
- The clear_xmm block in cpu-x86-asm.pl is removed. This was used to
clear some XMM-using features if OSXSAVE was set but XCR0 reports the
OS doesn't use XSAVE to store SSE state. This wasn't present in the
x86_64 and seems wrong. Section 13.5.2 of the Intel manual, volume 1,
explicitly says SSE may still be used in this case; the OS may save
that state in FXSAVE instead. A side discussion on upstream's RT#2633
agrees.
- The old code ran some AMD CPUs through the "intel" codepath and some
went straight to "generic" after duplicating some, but not all, logic.
The AMD copy didn't clear some reserved bits and didn't query CPUID 7
for AVX2 support. This is moot since AMD CPUs today don't support
AVX2, but it seems they're expected to in the future?
- Setting bit 10 is dropped. This doesn't appear to be queried anywhere,
was 32-bit only, and seems a remnant of upstream's
14e21f863a3e3278bb8660ea9844e92e52e1f2f7.
Change-Id: I0548877c97e997f7beb25e15f3fea71c68a951d2
Reviewed-on: https://boringssl-review.googlesource.com/5434
Reviewed-by: Adam Langley <agl@google.com>
Some other reserved bits are repurposed. Also explicitly mention that
bit 20 is zero (formerly RC4_CHAR), so it's not accidentally repurposed
later.
Change-Id: Idc4b32efe089ae7b7295472c4488f75258b7f962
Reviewed-on: https://boringssl-review.googlesource.com/5432
Reviewed-by: Adam Langley <agl@google.com>
Consumers sometimes use ERR_LIB_USER + <favorite number> instead of
ERR_get_next_error_library. To avoid causing them grief, keep ERR_LIB_USER
last.
Change-Id: Id19ae7836c41d5b156044bd20d417daf643bdda2
Reviewed-on: https://boringssl-review.googlesource.com/5290
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
poly1305.h was missing exports. While here, chacha.h should also be exported.
Change-Id: I5da9c953d3e5a5ef76a3e96bc4794192abee3ae6
Reviewed-on: https://boringssl-review.googlesource.com/5420
Reviewed-by: Adam Langley <agl@google.com>
RFC 7359 includes tests for various edge cases. Also, as
CRYPTO_poly1305_update can be used single-shot and streaming, we should
explicitly stress both.
Change-Id: Ie44c203a77624be10397ad05f06ca98d937db76f
Reviewed-on: https://boringssl-review.googlesource.com/5410
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
This is the first structure to be implemented with the new BIGNUM ASN.1
routines. Object reuse in the legacy d2i/i2d functions is implemented by
releasing whatever was in *out before and setting it to the
newly-allocated object. As with the new d2i_SSL_SESSION, this is a
weaker form of object reuse, but should suffice for reasonable callers.
As ECDSA_SIG is more likely to be parsed alone than as part of another
structure (and using CBB is slightly tedious), add convenient functions
which take byte arrays. For consistency with SSL_SESSION, they are named
to/from_bytes. from_bytes, unlike the CBS variant, rejects trailing
data.
Note this changes some test expectations: BER signatures now push an
error code. That they didn't do this was probably a mistake.
BUG=499653
Change-Id: I9ec74db53e70d9a989412cc9e2b599be0454caec
Reviewed-on: https://boringssl-review.googlesource.com/5269
Reviewed-by: Adam Langley <agl@google.com>
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for folding away certificate slots. extra_certs
and the slot-specific certificate chain will be the same.
SSL_CTX_get_extra_chain_certs already falls back to the slot-specific
chain if missing. SSL_CTX_get_extra_chain_certs_only is similar but
never falls back. This isn't very useful and is confusing with them
merged, so remove it.
BUG=486295
Change-Id: Ic708105bcf453dfe4e1969353d7eb7547ed2981b
Reviewed-on: https://boringssl-review.googlesource.com/5350
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
These are new as of 1.0.2, not terribly useful of APIs, and are the only
reason we have to retain so many NIDs in the TLS_SIGALGS structure.
Change-Id: I7237becca09acc2ec2be441ca17364f062253893
Reviewed-on: https://boringssl-review.googlesource.com/5347
Reviewed-by: Adam Langley <agl@google.com>
It's never used and is partially broken right now; EVP_PKEY_DH doesn't
work.
Change-Id: Id6262cd868153ef731e3f4d679b2ca308cfb12a3
Reviewed-on: https://boringssl-review.googlesource.com/5343
Reviewed-by: Adam Langley <agl@google.com>
RSA and ECDSA will both require being able to convert ASN.1 INTEGERs to
and from DER. Don't bother handling negative BIGNUMs for now. It doesn't
seem necessary and saves bothering with two's-complement vs
sign-and-magnitude.
BUG=499653
Change-Id: I1e80052067ed528809493af73b04f82539d564ff
Reviewed-on: https://boringssl-review.googlesource.com/5268
Reviewed-by: Adam Langley <agl@google.com>
The SSL23_ST_foo macros are only used in ssl_stat.c.
However, these states are never set and can be removed.
Move the two remaining SSLv2 client hello record macros to ssl3.h
Change-Id: I76055405a9050cf873b4d1cbc689e54dd3490b8a
Reviewed-on: https://boringssl-review.googlesource.com/4160
Reviewed-by: Adam Langley <agl@google.com>
All callers have been moved to EVP_PKEY_up_ref. (Neither spelling exists
upstream so we only had our own callers to move.)
Change-Id: I267f14054780fe3d6dc1170b7b6ae3811a0d1a9a
Reviewed-on: https://boringssl-review.googlesource.com/5291
Reviewed-by: Adam Langley <agl@google.com>
One tedious thing about using CBB is that you can't safely CBB_cleanup
until CBB_init is successful, which breaks the general 'goto err' style
of cleanup. This makes it possible:
CBB_zero ~ EVP_MD_CTX_init
CBB_init ~ EVP_DigestInit
CBB_cleanup ~ EVP_MD_CTX_cleanup
Change-Id: I085ecc4405715368886dc4de02285a47e7fc4c52
Reviewed-on: https://boringssl-review.googlesource.com/5267
Reviewed-by: Adam Langley <agl@google.com>
The name is confusing. EC keys aren't serialized to DER.
DSA keys are also weird, but left alone for now. i2d_DSAPublicKey either
serializes to a DSAPublicKey per RFC 3279 if write_params is 0 or what
seems to be an OpenSSL-specific format that includes the group if
write_params is 1. See upstream's
ea6b07b54c1f8fc2275a121cdda071e2df7bd6c1.
Change-Id: I0d15140acc2d688a563b615fc6a9e3abec929753
Reviewed-on: https://boringssl-review.googlesource.com/5261
Reviewed-by: Adam Langley <agl@google.com>
They're all forward-declared. There's no need to use the struct names.
Change-Id: I435ae2f5971128f08c730317ca644d97239f3b54
Reviewed-on: https://boringssl-review.googlesource.com/5260
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
Chromium uses a zygote process and a sandbox on Linux. In order for RAND_bytes
to be functional and guaranteed fork-safe inside the renderers, /dev/urandom
must be prewarmed. Calling RAND_bytes initializes a thread-local ChaCha20 key
when rdrand is available. So that key is fork-safe and to avoid tempting any
dragons by touching pthreads APIs before a non-exec fork, add a
RAND_set_urandom_fd API. It allows the consumer to supply the /dev/urandom fd
and promises to be fork-safe, both in initializing key material and use of
pthreads.
This doesn't affect any current shipping versions of Chrome.
BUG=462040
Change-Id: I1037e21e525918971380e4ea1371703c8237a0b0
Reviewed-on: https://boringssl-review.googlesource.com/5302
Reviewed-by: Adam Langley <agl@google.com>
Having them spread between ssl.h and tls1.h isn't terribly enlightening.
Change-Id: I5fec4b8e5260312b22bcef21bd4db7a8a8149ad8
Reviewed-on: https://boringssl-review.googlesource.com/5234
Reviewed-by: Adam Langley <agl@google.com>
Using the original numerical order made more sense before they were changed to
doesnt_exist.
BUG=404754
Change-Id: I2971eff7c6fbe7c5d340b103de71bbfa180f1f96
Reviewed-on: https://boringssl-review.googlesource.com/5232
Reviewed-by: Adam Langley <agl@google.com>
This removes EVP_PKEY_HMAC and all the support code around it. EVP_MD requires
a lot of extra glue to support HMAC. This lets us prune it all away.
As a bonus, it removes a (minor) dependency from EVP to the legacy ASN.1 stack.
Change-Id: I5a9e3e39f518429828dbf13d14647fb37d9dc35a
Reviewed-on: https://boringssl-review.googlesource.com/5120
Reviewed-by: Adam Langley <agl@google.com>
