It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
The old empty record logic discarded the records at a very low-level.
Let the error bubble up to ssl3_read_bytes so the type mismatch logic
may kick in before the empty record is skipped.
Add tests for when the record in question is application data, before
before the handshake and post ChangeCipherSpec.
BUG=521840
Change-Id: I47dff389cda65d6672b9be39d7d89490331063fa
Reviewed-on: https://boringssl-review.googlesource.com/5754
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Apparently we left those as zero. Oh well. This only affects
SSL_CIPHER_get_bits, but so long as we have the field, it ought to be correct.
Change-Id: I2878ec22c2f5a6263f805e04d9fd8448994639b7
Reviewed-on: https://boringssl-review.googlesource.com/5752
Reviewed-by: Adam Langley <agl@google.com>
This made sense when the cipher might have been standardized as-is, so a
DHE_RSA variant could appease the IETF. Since the standardized variant is going
to have some nonce tweaks anyway, there's no sense in keeping this around. Get
rid of one non-standard cipher suite value early. (Even if they were to be
standardized as-is, it's not clear we should implement new DHE cipher suites at
this point.)
Chrome UMA, unsurprisingly, shows that it's unused.
Change-Id: Id83d73a4294b470ec2e94d5308fba135d6eeb228
Reviewed-on: https://boringssl-review.googlesource.com/5750
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They get initialized in SSL_new and SSL_CTX_new, respectively.
Change-Id: Ib484108987a99f654d1a77fc473103f5cb393bd7
Reviewed-on: https://boringssl-review.googlesource.com/5676
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why one would ever want to externally know the curve list
supported by the server. The API is new as of 1.0.2 and has no callers.
Configuring curves will be much more useful when Curve25519 exists and the API
isn't terribly crazy, so keep that API around and promote it to a real
function.
BUG=404754
Change-Id: Ibd5858791d3dfb30d53dd680cb75b0caddcbb7df
Reviewed-on: https://boringssl-review.googlesource.com/5674
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
This guarantees that we never read beyond the first record, even if the
first record is empty. Between removing SSL_set_read_ahead and DTLS
enforcing record boundaries, this means the buffer need never memmove
data.
The memmove isn't really much of a burden and we can probably just put
SSL_set_read_ahead back after the cleanup if desired. But while the
non-existant read_ahead is off, we should avoid reading more than needed.
(Also the current memmove logic is completely wrong for TLS. Checking
align != 0 doesn't make sense. The real reason to memmove is that the
next record may still be full size. So now line 209 of s3_pkt.c should
*actually* be unreachable.)
SSL_R_HTTPS_PROXY_REQUEST detection is now slightly less accurate, but
OpenSSL was already not parsing HTTP completely. We could asynchronously
read the extra 3 bytes once the first 5 match, but that seems
unnecessary. (Shall we just get rid of all these HTTP detectors? The
only consumer of those error codes is some diagnostics logic.)
BUG=468889
Change-Id: Ie3bf148ae7274795e1d048d78282d1d8063278ea
Reviewed-on: https://boringssl-review.googlesource.com/5714
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why I made a separate one. (Not quite how the V2ClientHello
code will look in the buffer-free API yet. Probably the future
refactored SSL_HANDSHAKE gadget will need separate entry points to
consume a handshake message or V2ClientHello and the driver deals with
framing.)
This also means that ssl3_setup_read_buffer is never called external to
ssl3_read_n.
BUG=468889
Change-Id: I872f1188270968bf53ee9d0488a761c772a11e9e
Reviewed-on: https://boringssl-review.googlesource.com/5713
Reviewed-by: Adam Langley <agl@google.com>
Rather than sniff for ClientHello, just fall through to standard logic
once weird cases are resolved.
This means that garbage will now read as WRONG_VERSION rather than
UNKNOWN_PROTOCOL, but the rules here were slightly odd anyway. This also
means we'll now accept empty records before the ClientHello (up to the
empty record limit), and process records of the wrong type with the
usual codepath during the handshake.
This shouldn't be any more risk as it just makes the ClientHello more
consistent with the rest of the protocol. A TLS implementation that
doesn't parse V2ClientHello would do the same unless it still
special-cased the first record. All newly-exposed states are reachable
by fragmenting ClientHello by one byte and then sending the record in
question.
BUG=468889
Change-Id: Ib701ae5d8adb663e158c391639b232a9d9cd1c6e
Reviewed-on: https://boringssl-review.googlesource.com/5712
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
Due to a typo, when a server sent an unknown extension, the extension
number would be taken from a NULL structure rather than from the
variable of the same name that's in the local scope.
BUG=517935
Change-Id: I29d5eb3c56cded40f6155a81556199f12439ae06
Reviewed-on: https://boringssl-review.googlesource.com/5650
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
Rather than iterate over handshake_dgsts itself, it can just call
tls1_handshake_digest.
Change-Id: Ia518da540e47e65b13367eb1af184c0885908488
Reviewed-on: https://boringssl-review.googlesource.com/5617
Reviewed-by: Adam Langley <agl@google.com>
A memory BIO is internally a BUF_MEM anyway. There's no need to bring
BIO_write into the mix. BUF_MEM is size_t clean.
Change-Id: I4ec6e4d22c72696bf47c95861771013483f75cab
Reviewed-on: https://boringssl-review.googlesource.com/5616
Reviewed-by: Adam Langley <agl@google.com>
The handshake hash is initialized from the buffer as soon as the cipher
is known. When adding a message to the transcript, independently update
the buffer and rolling hash, whichever is active. This avoids the
complications around dont_free_handshake_buffer and EMS.
BUG=492371
Change-Id: I3b1065796a50fd1be5d42ead7210c2f253ef0aca
Reviewed-on: https://boringssl-review.googlesource.com/5615
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
It's a property of just algorithm_enc and hopefully AES-GCM will
continue to be the only true AEAD that requires this. Simpler to just
keep it in ssl_aead_ctx.c.
Change-Id: Ib7c060a3de2fa8590b2dc36c23a5d5fabff43b07
Reviewed-on: https://boringssl-review.googlesource.com/5613
Reviewed-by: Adam Langley <agl@google.com>
Take the sequence number as a parameter. Also replace satsub64be with
the boring thing: convert to uint64_t and subtract normally.
BUG=468889
Change-Id: Icab75f872b5e55cf4e9d68b66934ec91afeb198b
Reviewed-on: https://boringssl-review.googlesource.com/5558
Reviewed-by: Adam Langley <agl@google.com>
The split was only needed for buffering records. Likewise, the extra
seq_num field is now unnecessary.
This also fixes a bug where dtls1_process_record will push an error on
the queue if the decrypted record is too large, which dtls1_get_record
will ignore but fail to clear, leaving garbage on the error queue. The
error is now treated as fatal; the reason DTLS silently drops invalid
packets is worrying about ease of DoS, but after SSL_AEAD_CTX_open, the
packet has been authenticated. (Unless it's the null cipher, but that's
during the handshake and the handshake is already DoS-able by breaking
handshake reassembly state.)
The function is still rather a mess. Later changes will clean this up.
BUG=468889
Change-Id: I96a54afe0755d43c34456f76e77fc4ee52ad01e3
Reviewed-on: https://boringssl-review.googlesource.com/5557
Reviewed-by: Adam Langley <agl@google.com>
The existing tests only went monotonic. Allow an arbitrary mapping
function. Also test by sending more app data. The handshake is fairly
resilient to replayed packets, whereas our test code intentionally
isn't.
Change-Id: I0fb74bbacc260c65ec5f6a1ca8f3cb23b4192855
Reviewed-on: https://boringssl-review.googlesource.com/5556
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
I don't think we had coverage for this check.
Change-Id: I5e454e69c1ee9f1b9760d2ef1431170d76f78d63
Reviewed-on: https://boringssl-review.googlesource.com/5544
Reviewed-by: Adam Langley <agl@google.com>
That got out of sync at some point.
Change-Id: I5a45f50f330ceb65053181afc916053a80aa2c5d
Reviewed-on: https://boringssl-review.googlesource.com/5541
Reviewed-by: Adam Langley <agl@google.com>
It's never called anywhere and doesn't return anything interesting.
Change-Id: I68e7e9cd7b74a72f61092ac5d2b5d2390e55a228
Reviewed-on: https://boringssl-review.googlesource.com/5540
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
These are not in upstream and were probably introduced on accident by stray vim
keystrokes.
Change-Id: I35f51f81fc37e75702e7d8ffc6f040ce71321b54
Reviewed-on: https://boringssl-review.googlesource.com/5490
Reviewed-by: Adam Langley <agl@google.com>
With the fastradio stuff gone, the padding computation is slightly more
straight-forward.
Change-Id: I67ede92fdf5f34c265c7a44e4cdc1a5ce5416df2
Reviewed-on: https://boringssl-review.googlesource.com/5482
Reviewed-by: Adam Langley <agl@google.com>
This sort of test is more suitable for ssl_test than runner. This should
stress all the various cases around padding. Use tickets rather than
hostnames to inflate the ClientHello because there's a fairly tight
maximum hostname length.
Change-Id: Ibd43aaa7acb9bf5fa00a9d2548d2101e5bb147d3
Reviewed-on: https://boringssl-review.googlesource.com/5480
Reviewed-by: Adam Langley <agl@google.com>
These were used in the upstream Go code to fuzz-test the handshake
marshal/unmarshal functions. But we don't do that there so best to
remove them.
(The ClientHello equals function is still used, however, to test DTLS
retransmission.)
Change-Id: I950bdf4f7eefa2bca13c10f5328d2e6c586604e2
Reviewed-on: https://boringssl-review.googlesource.com/5470
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I5777b73f485da6534b407e6c531f8293898b9c06
Reviewed-on: https://boringssl-review.googlesource.com/5461
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3b085cd13295e83c578c549763f0de82f39499a2
Reviewed-on: https://boringssl-review.googlesource.com/5460
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
In the ancient times, before ex_data and OpenSSL, SSLeay supported a
single app_data slot in various types. Later app_data begat ex_data, and
app_data was replaced by compatibility macros to ex_data index zero.
Today, app_data is still in use, but ex_data never reserved index zero
for app_data. This causes some danger where, if the first ex_data
registration did not use NULL callbacks, the registration's callbacks
would collide with app_data.
Instead, add an option to the types with app_data to reserve index zero.
Also switch SSL_get_ex_data_X509_STORE_CTX_idx to always return zero
rather than allocate a new one. It used to be that you used
X509_STORE_CTX_get_app_data. I only found one consumer that we probably
don't care about, but, to be safe and since it's easy, go with the
conservative option. (Although SSL_get_ex_data_X509_STORE_CTX_idx wasn't
guaranteed to alias app_data, in practice it always did. No consumer
ever calls X509_STORE_CTX_get_ex_new_index.)
Change-Id: Ie75b279d60aefd003ffef103f99021c5d696a5e9
Reviewed-on: https://boringssl-review.googlesource.com/5313
Reviewed-by: Adam Langley <agl@google.com>
Chromium's NaCl build has _POSIX_SOURCE already defined, so #undef it first.
The compiler used also dislikes static asserts with the same name.
Change-Id: I0283fbad1a2ccf98cdb0ca2a7965b15441806308
Reviewed-on: https://boringssl-review.googlesource.com/5430
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
Historically we had a bug around this and this change implements a test
that we were previously carrying internally.
Change-Id: Id181fedf66b2b385b54131ac91d74a31f86f0205
Reviewed-on: https://boringssl-review.googlesource.com/5380
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
Now that 11c0f8e54c has landed, none of
the cases of the switch in |ssl3_ctrl| ever break and so the “return 1”
at the end of the function is unreachable. MSVC is unhappy about that.
Change-Id: I001dc63831ba60d93b622ac095297e2febc5f078
Since it resets leaf, private key, and chain, it makes sense to also
clear custom key method tables.
Change-Id: If511b8f15a44674c31d068d36984e9189c5a9071
Reviewed-on: https://boringssl-review.googlesource.com/5356
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for folding away certificate slots. extra_certs
and the slot-specific certificate chain will be the same.
SSL_CTX_get_extra_chain_certs already falls back to the slot-specific
chain if missing. SSL_CTX_get_extra_chain_certs_only is similar but
never falls back. This isn't very useful and is confusing with them
merged, so remove it.
BUG=486295
Change-Id: Ic708105bcf453dfe4e1969353d7eb7547ed2981b
Reviewed-on: https://boringssl-review.googlesource.com/5350
Reviewed-by: Adam Langley <agl@google.com>
The distinction was not well-enforced in the code. In fact, it wasn't
even possible to use the RSA_SIGN slot because ssl_set_pkey and
ssl_set_cert would always use the RSA_ENC slot.
A follow-up will fold away the mechanism altogether, but this is an easy
initial simplfication.
BUG=486295
Change-Id: I66b5bf3e6dc243dac7c75924c1c1983538e49060
Reviewed-on: https://boringssl-review.googlesource.com/5349
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
These are new as of 1.0.2, not terribly useful of APIs, and are the only
reason we have to retain so many NIDs in the TLS_SIGALGS structure.
Change-Id: I7237becca09acc2ec2be441ca17364f062253893
Reviewed-on: https://boringssl-review.googlesource.com/5347
Reviewed-by: Adam Langley <agl@google.com>
It's never used and is partially broken right now; EVP_PKEY_DH doesn't
work.
Change-Id: Id6262cd868153ef731e3f4d679b2ca308cfb12a3
Reviewed-on: https://boringssl-review.googlesource.com/5343
Reviewed-by: Adam Langley <agl@google.com>
After the custom key method support, the EVP_PKEY parameter is somewhat
confusing (to be resolved with the certificate slots removal) as it must
always refer to a private key. ssl3_cert_verify_hash is sometimes used
with the peer's public key. If custom keys were supported on the server,
this would break.
Fix this by passing a pkey_type parameter and letting the caller decide
whether this uses SSL_PRIVATE_KEY_METHOD or not.
Change-Id: I673b92579a84b4561f28026ec0b1c78a6bfee440
Reviewed-on: https://boringssl-review.googlesource.com/5341
Reviewed-by: Adam Langley <agl@google.com>
If ssl_do_write takes more than one iteration, ssl3_output_cert_chain
would be called an extra time. This is very unlikely in practice because
of the buffer BIO.
Change-Id: Ic1ae9752a8837bb404429fc60306c659208c6185
Reviewed-on: https://boringssl-review.googlesource.com/5340
Reviewed-by: Adam Langley <agl@google.com>
Missed that there were two of them.
Change-Id: Ibab169ef1f75be9c5ad1ffa0f232629e76a4512d
Reviewed-on: https://boringssl-review.googlesource.com/5332
Reviewed-by: Adam Langley <agl@google.com>
It (incorrectly) thinks some variables are uninitialized. It also gets confused
about some const parameters.
Change-Id: Ie2b3a5336692e7293cf03d6a4cd5345d30b628b3
Reviewed-on: https://boringssl-review.googlesource.com/5330
Reviewed-by: Adam Langley <agl@google.com>
The SSL23_ST_foo macros are only used in ssl_stat.c.
However, these states are never set and can be removed.
Move the two remaining SSLv2 client hello record macros to ssl3.h
Change-Id: I76055405a9050cf873b4d1cbc689e54dd3490b8a
Reviewed-on: https://boringssl-review.googlesource.com/4160
Reviewed-by: Adam Langley <agl@google.com>
One tedious thing about using CBB is that you can't safely CBB_cleanup
until CBB_init is successful, which breaks the general 'goto err' style
of cleanup. This makes it possible:
CBB_zero ~ EVP_MD_CTX_init
CBB_init ~ EVP_DigestInit
CBB_cleanup ~ EVP_MD_CTX_cleanup
Change-Id: I085ecc4405715368886dc4de02285a47e7fc4c52
Reviewed-on: https://boringssl-review.googlesource.com/5267
Reviewed-by: Adam Langley <agl@google.com>
Rather than parse with d2i_ECDSA_SIG and reserialize, this is cleaner.
It's also clearer that i2d_PublicKey isn't being used for DER.
Change-Id: Iac57fb6badd1dfed1e66984e95a31f609b1538a4
Reviewed-on: https://boringssl-review.googlesource.com/5263
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
It's still the case that we have many old compilers that can't cope with
anything else ☹.
Change-Id: Ie5a1987cd5164bdbde0c17effaa62aecb7d12352
Reviewed-on: https://boringssl-review.googlesource.com/5320
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
This test shouldn't trigger a renegotiation: the test is trying to
assert that without the legacy-server flag set, a server that doesn't
echo the renegotiation extension can't be connected to.
Change-Id: I1368d15ebc8f296f3ff07040c0e6c48fdb49e56f
Reviewed-on: https://boringssl-review.googlesource.com/5141
Reviewed-by: Adam Langley <agl@google.com>
Otherwise another thread may cause the session to be destroyed first.
Change-Id: I2084a28ece11540e1b8f289553161d99395e2d1f
Reviewed-on: https://boringssl-review.googlesource.com/5231
Reviewed-by: Adam Langley <agl@google.com>
Rather than rely on Chromium to query SSL_initial_handshake_complete in the
callback (which didn't work anyway because the callback is called afterwards),
move the logic into BoringSSL. BoringSSL already enforces that clients never
offer resumptions on renegotiation (it wouldn't work well anyway as client
session cache lookup is external), so it's reasonable to also implement
in-library that sessions established on a renegotiation are not cached.
Add a bunch of tests that new_session_cb is called when expected.
BUG=501418
Change-Id: I42d44c82b043af72b60a0f8fdb57799e20f13ed5
Reviewed-on: https://boringssl-review.googlesource.com/5171
Reviewed-by: Adam Langley <agl@google.com>
b4d65fda70 was written concurrently with
my updating runner to handle -resource-dir (in
7c803a65d5) and thus it didn't include the
needed change for the test that it added to handle it.
This change fixes that added test so that it can run with -resource-dir.
Change-Id: I06b0adfb3fcf3f11c061fe1c8332a45cd7cd2dbc
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
Turns out the safer/simpler method still wasn't quite right. :-)
session->sess_cert isn't serialized and deserialized, which is poor. Duplicate
it manually for now. Leave a TODO to get rid of that field altogether as it's
not especially helpful. The certificate-related fields should be in the
session. The others probably have no reason to be preserved on resumptions at
all.
Test by making bssl_shim.cc assert the peer cert chain is there or not as
expected.
BUG=501220
Change-Id: I44034167629720d6e2b7b0b938d58bcab3ab0abe
Reviewed-on: https://boringssl-review.googlesource.com/5170
Reviewed-by: Adam Langley <agl@google.com>
To account for the changes in ticket renewal, Chromium will need to listen for
new_session_cb to determine whether the handshake produced a new session.
Chromium currently never caches sessions produced on a renegotiation. To retain
that behavior, it'll need to know whether new_session_cb is initial or not.
Rather than maintain duplicate state and listen for SSL_HANDSHAKE_DONE, it's
simpler to just let it query ssl->s3->initial_handshake_complete.
BUG=501418
Change-Id: Ib2f2541460bd09cf16106388e9cfdf3662e02681
Reviewed-on: https://boringssl-review.googlesource.com/5126
Reviewed-by: Adam Langley <agl@google.com>
If gdb is attached, it's convenient to be able to continue running.
Change-Id: I3bbb2634d05a08f6bad5425f71da2210dbb80cfe
Reviewed-on: https://boringssl-review.googlesource.com/5125
Reviewed-by: Adam Langley <agl@google.com>
This change adds flags to runner to allow it to be sufficiently
configured that it can run from any directory.
Change-Id: I82c08da4ffd26c5b11637480b0a79eaba0904d38
Reviewed-on: https://boringssl-review.googlesource.com/5130
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 9dcab127e14467733523ff7626da8906e67eedd6. The root problem
is dtls1_read_bytes is wrong, but we can get the right behavior now and add a
regression test for it before cleaning it up.
Change-Id: I4e5c39ab254a872d9f64242c9b77b020bdded6e6
Reviewed-on: https://boringssl-review.googlesource.com/5123
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 27c76b9b8010b536687318739c6f631ce4194688, CVE-2015-1791.
Rather than write a dup function, serializing and deserializing the object is
simpler. It also fixes a bug in the original fix where it never calls
new_session_cb to store the new session (for clients which use that callback;
how clients should handle the session cache is much less clear).
The old session isn't pruned as we haven't processed the Finished message yet.
RFC 5077 says:
The server MUST NOT assume that the client actually received the updated
ticket until it successfully verifies the client's Finished message.
Moreover, because network messages are asynchronous, a new SSL connection may
have began just before the client received the new ticket, so any such servers
are broken regardless.
Change-Id: I13b3dc986dc58ea2ce66659dbb29e14cd02a641b
Reviewed-on: https://boringssl-review.googlesource.com/5122
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
If we're going to have PSK and use standard cipher suites, this might be
the best that we can do for the moment.
Change-Id: I35d9831b2991dc5b23c9e24d98cdc0db95919d39
Reviewed-on: https://boringssl-review.googlesource.com/5052
Reviewed-by: Adam Langley <agl@google.com>
This is the best PSK cipher suite, but it's non-standard and nobody is
using it. Trivial to bring back in the future if we have need of it.
Change-Id: Ie78790f102027c67d1c9b19994bfb10a2095ba92
Reviewed-on: https://boringssl-review.googlesource.com/5051
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is a remnant of DSA support. It's not possible to parse out an incomplete
public key for the more reasonable X.509 key types.
Change-Id: I4f4c7b9d3795f5f0635f80a4cec9ca4c778e6c69
Reviewed-on: https://boringssl-review.googlesource.com/5050
Reviewed-by: Adam Langley <agl@google.com>
Most of the logic was redundant with checks already made in
ssl3_get_server_certificate. The DHE check was missing an ECDHE half
(and was impossible). The ECDSA check allowed an ECDSA certificate for
RSA. The only non-redundant check was a key usage check which,
strangely, is only done for ECDSA ciphers.
(Although this function called X509_certificate_type and checked sign
bits, those bits in X509_certificate_type are purely a function of the
key type and don't do anything.)
Change-Id: I8df7eccc0ffff49e4cfd778bd91058eb253b13cb
Reviewed-on: https://boringssl-review.googlesource.com/5047
Reviewed-by: Adam Langley <agl@google.com>
The NULL checks later on notice, but failing with
SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS on accident is confusing.
Require that the message be non-empty.
Change-Id: Iddfac6a3ae6e6dc66c3de41d3bb26e133c0c6e1d
Reviewed-on: https://boringssl-review.googlesource.com/5046
Reviewed-by: Adam Langley <agl@google.com>
The current logic requires each key exchange extract the key. It also
leaves handling X509_get_pubkey failure to the anonymous cipher suite
case which has an escape hatch where it goes back to check
ssl3_check_cert_and_algorithm.
Instead, get the key iff we know we have a signature to check.
Change-Id: If7154c7156aad3b89489defe4c1d951eeebf0089
Reviewed-on: https://boringssl-review.googlesource.com/5045
Reviewed-by: Adam Langley <agl@google.com>
This doesn't even change behavior. Unlike local configuration, the peer
can never have multiple certificates anyway. (Even with a renego, the
SESS_CERT is created anew.)
This does lose the implicit certificate type check, but the certificate
type is already checked in ssl3_get_server_certificate and later checked
post-facto in ssl3_check_cert_and_algorithm (except that one seems to
have some bugs like it accepts ECDSA certificates for RSA cipher suites,
to be cleaned up in a follow-up). Either way, we have the certificate
mismatch tests for this.
BUG=486295
Change-Id: I437bb723bb310ad54ee4150eda67c1cfe43377b3
Reviewed-on: https://boringssl-review.googlesource.com/5044
Reviewed-by: Adam Langley <agl@google.com>
We shouldn't have protocol constraints that are sensitive to whether
data is returned synchronously or not.
Per https://boringssl-review.googlesource.com/#/c/4112/, the original
limitation was to avoid OpenSSL ABI changes. This is no longer a
concern.
Add tests for the sync and async case. Send the empty records in two
batches to ensure the count is reset correctly.
Change-Id: I3fee839438527e71adb83d437879bb0d49ca5c07
Reviewed-on: https://boringssl-review.googlesource.com/5040
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I55dc3d87a9571901abd2bbaf268871a482cf3bc5
Reviewed-on: https://boringssl-review.googlesource.com/4983
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
Add expectResumeRejected to note cases where we expect a resumption
handshake to be rejected. (This was previously done by adding a flag,
which is a little less clear.)
Also, save the result of crypto/tls.Conn.ConnectionState() rather than
repeat that a lot.
Change-Id: I963945eda5ce1f3040b655e2441174b918b216b3
Reviewed-on: https://boringssl-review.googlesource.com/4980
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
With SSL2 gone, there's no need for this split between the abstract
cipher framework and ciphers. Put the cipher suite table in ssl_cipher.c
and move other SSL_CIPHER logic there. With that gone, prune the
cipher-related hooks in SSL_PROTOCOL_METHOD.
BUG=468889
Change-Id: I48579de8bc4c0ea52781ba1b7b57bc5b4919d21c
Reviewed-on: https://boringssl-review.googlesource.com/4961
Reviewed-by: Adam Langley <agl@google.com>
Make sure we don't break that on accident.
Change-Id: I22d58d35170d43375622fe61e4a588d1d626a054
Reviewed-on: https://boringssl-review.googlesource.com/4960
Reviewed-by: Adam Langley <agl@google.com>
They're redundant with each other.
Change-Id: I17e7ff8c4e0b1486986dd866fd99673fa2aaa494
Reviewed-on: https://boringssl-review.googlesource.com/4959
Reviewed-by: Adam Langley <agl@google.com>
All ciphers are implemented by an EVP_AEAD.
Change-Id: Ifa754599a34e16bf97e1a4b84a271c6d45462c7c
Reviewed-on: https://boringssl-review.googlesource.com/4958
Reviewed-by: Adam Langley <agl@google.com>
The ctrl hooks are left alone since they should just go away.
Simplifying the cipher story will happen in the next CL.
BUG=468889
Change-Id: I979971c90f59c55cd5d17554f1253158b114f18b
Reviewed-on: https://boringssl-review.googlesource.com/4957
Reviewed-by: Adam Langley <agl@google.com>
This still needs significant work, especially the close_notify half, but
clarify the interface and get *_read_bytes out of SSL_PROTOCOL_METHOD.
read_bytes is an implementation detail of those two and get_message
rather than both an implementation detail of get_message for handshake
and a (wholly inappropriate) exposed interface for the other two.
BUG=468889
Change-Id: I7dd23869e0b7c3532ceb2e9dd31ca25ea31128e7
Reviewed-on: https://boringssl-review.googlesource.com/4956
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
The old upstream logic actually didn't do this, but 1.1.0's new code does.
Given that the version has never changed and even unknown fields were rejected
by the old code, this seems a safe and prudent thing to do.
Change-Id: I09071585e5183993b358c10ad36fc206f8bceeda
Reviewed-on: https://boringssl-review.googlesource.com/4942
Reviewed-by: Adam Langley <agl@google.com>
The original OpenSSL implementation did the same. M_ASN1_D2I_Finish checks
this. Forwards compatibility with future sessions with unknown fields is
probably not desirable.
Change-Id: I116a8c482cbcc47c3fcc31515c4a3718f66cf268
Reviewed-on: https://boringssl-review.googlesource.com/4941
Reviewed-by: Adam Langley <agl@google.com>
9a41d1b946 broke handling of multiple records in
a single packet. If |extend| is true, not all of the previous packet should be
consumed, only up to the record length.
Add a test which stresses the DTLS stack's handling of multiple handshake
fragments in a handshake record and multiple handshake records in a packet.
Change-Id: I96571098ad9001e96440501c4730325227b155b8
Reviewed-on: https://boringssl-review.googlesource.com/4950
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's dab18ab596acb35eff2545643e25757e4f9cd777. This allows us to
add an assertion to the finished computation that the handshake buffer has
already been released.
BUG=492371
Change-Id: I8f15c618c8b2c70bfe583c81644d9dbea95519d4
Reviewed-on: https://boringssl-review.googlesource.com/4887
Reviewed-by: Adam Langley <agl@google.com>
This allows us to merge two of the ssl3_digest_cached_records calls which were
almost, but not completely, redundant. Also catches a missing case: the buffer
may be discarded if doing session resumption but otherwise enabling client
authentication.
BUG=492371
Change-Id: I78e9a4a9cca665e89899ef97b815454c6f5c7e02
Reviewed-on: https://boringssl-review.googlesource.com/4885
Reviewed-by: Adam Langley <agl@google.com>
Servers can no longer renegotiate.
Change-Id: Id79d5753562e29d2872871f4f571552a019215fa
Reviewed-on: https://boringssl-review.googlesource.com/4884
Reviewed-by: Adam Langley <agl@google.com>
This is documented as "Only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation." Server-side renegotiation is gone.
I'm not sure this flag has ever worked anyway, dating all the way back to
SSLeay 0.8.1b. ssl_get_new_session overwrites s->session, so the old
session->peer is lost.
Change-Id: Ie173243e189c63272c368a55167b8596494fd59c
Reviewed-on: https://boringssl-review.googlesource.com/4883
Reviewed-by: Adam Langley <agl@google.com>
Never send the time as a client. Always send it as a server.
Change-Id: I20c55078cfe199d53dc002f6ee5dd57060b086d5
Reviewed-on: https://boringssl-review.googlesource.com/4829
Reviewed-by: Adam Langley <agl@google.com>
Yes, OpenSSL lets you randomly change its internal state. This is used
as part of server-side renegotiation. Server-side renegotiation is gone.
BUG=429450
Change-Id: Ic1b013705734357acf64e8bf89a051b2b7521c64
Reviewed-on: https://boringssl-review.googlesource.com/4828
Reviewed-by: Adam Langley <agl@google.com>
They were added to avoid accidentally enabling renego for a consumer which set
them to zero to break the handshake on renego. Now that renego is off by
default, we can get rid of them again.
Change-Id: I2cc3bf567c55c6562352446a36f2b5af37f519ba
Reviewed-on: https://boringssl-review.googlesource.com/4827
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
This dates back to upstream's a2a0158959e597188c10fbfeaf61888b2df2e587.
It seems to be a remnant of those SSL_clear calls in the handshake state
machine which... were also bizarre and since gone.
Since SSL_clear is to drop the current connection but retain the
configuration, it doesn't really make sense to forbid it while you're
mid-handshake.
This removes another consumer of s->renegotiate.
BUG=429450
Change-Id: Ifac6bf11644447fd5571262bed7421684739bc39
Reviewed-on: https://boringssl-review.googlesource.com/4823
Reviewed-by: Adam Langley <agl@google.com>
ssl_cipher_list_to_bytes is client-only, so s->renegotiate worked, but
the only reason the other two worked is because s->renegotiate isn't a
lie on the server before ServerHello.
BUG=429450
Change-Id: If68a986c6ec4a0f16e57a6187238e05b50ecedfc
Reviewed-on: https://boringssl-review.googlesource.com/4822
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
This isn't exhaustive. There are still failures in some tests which probably
ought to get C++'d first.
Change-Id: Iac58df9d98cdfd94603d54374a531b2559df64c3
Reviewed-on: https://boringssl-review.googlesource.com/4795
Reviewed-by: Adam Langley <agl@google.com>
Currently far from passing and I haven't even tried with a leak checker yet.
Also bn_test is slow.
Change-Id: I4fe2783aa5f7897839ca846062ae7e4a367d2469
Reviewed-on: https://boringssl-review.googlesource.com/4794
Reviewed-by: Adam Langley <agl@google.com>
This is considerably less scary than swapping out connection state. It also
fixes a minor bug where, if dtls1_do_write had an alert to dispatch and we
happened to retry during a rexmit, it would use the wrong epoch.
BUG=468889
Change-Id: I754b0d46bfd02f797f4c3f7cfde28d3e5f30c52b
Reviewed-on: https://boringssl-review.googlesource.com/4793
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
Chromium's session cache has since been rewritten and no longer needs to
muck with those functions in tests.
Change-Id: I2defad81513210dca5e105757e04cbb677583251
Reviewed-on: https://boringssl-review.googlesource.com/4788
Reviewed-by: Adam Langley <agl@google.com>
Current thought is to organize this by:
- Core SSL_CTX APIs (creating, destroying)
- Core SSL APIs (creating destroying, maybe handshake, read, write as
well)
- APIs to configure SSL_CTX/SSL, roughly grouped by feature. Probably
options and modes are the first two sections. SSL_TXT_* constants can
be part of documenting cipher suite configuration.
- APIs to query state from SSL_CTX/SSL, roughly grouped by feature. (Or
perhaps these should be folded into the configuration sections?)
The functions themselves aren't reordered or reorganized to match the
eventual header order yet. Though I did do the s -> ssl rename on the
ones I've touched.
Also formally deprecate SSL_clear. It would be a core SSL API
except it's horrible.
Change-Id: Ia7e4fdcb7bad4e9ccdee8cf8c3136dc63aaaa772
Reviewed-on: https://boringssl-review.googlesource.com/4784
Reviewed-by: Adam Langley <agl@google.com>
Rather than duplicate all the various modifiers, which is quite
error-prone, write all the tests to a temporary array and then apply
modifiers afterwards.
Change-Id: I19bfeb83b722ed34e973f17906c5e071471a926a
Reviewed-on: https://boringssl-review.googlesource.com/4782
Reviewed-by: Adam Langley <agl@google.com>
We should be testing asynchronous renego.
BUG=429450
Change-Id: Ib7a5d42f2ac728f9ea0d80158eef63ad77cd77a4
Reviewed-on: https://boringssl-review.googlesource.com/4781
Reviewed-by: Adam Langley <agl@google.com>
Since we hope to eventually lose server-side renegotiation support
altogether, get the client-side version of those tests. We should have
had those anyway to test that the default is to allow it.
BUG=429450
Change-Id: I4a18f339b55f3f07d77e22e823141e10a12bc9ff
Reviewed-on: https://boringssl-review.googlesource.com/4780
Reviewed-by: Adam Langley <agl@google.com>
|SSL_CTX| and |X509_STORE| have grown their own locks. Several static
locks have been added to hack around not being able to use a
|CRYPTO_once_t| in public headers. Lastly, support for calling
|SSL_CTX_set_generate_session_id| concurrently with active connections
has been removed. No other property of an |SSL_CTX| works like that.
Change-Id: Iff5fe3ee3fdd6ea9c9daee96f850b107ad8a6bca
Reviewed-on: https://boringssl-review.googlesource.com/4775
Reviewed-by: Adam Langley <agl@google.com>
Convert reference counts in ssl/ to use |CRYPTO_refcount_t|.
Change-Id: I5d60f641b0c89b1ddfe38bfbd9d7285c60377f4c
Reviewed-on: https://boringssl-review.googlesource.com/4773
Reviewed-by: Adam Langley <agl@google.com>
This change converts the reference counts in crypto/ to use
|CRYPTO_refcount_t|. The reference counts in |X509_PKEY| and |X509_INFO|
were never actually used and so were dropped.
Change-Id: I75d572cdac1f8c1083c482e29c9519282d7fd16c
Reviewed-on: https://boringssl-review.googlesource.com/4772
Reviewed-by: Adam Langley <agl@google.com>
DH groups less than 1024 bits are clearly not very safe. Ideally servers
would switch to ECDHE because 1024 isn't great either, but this will
serve for the short term.
BUG=490240
Change-Id: Ic9aac714cdcdcbfae319b5eb1410675d3b903a69
Reviewed-on: https://boringssl-review.googlesource.com/4813
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
We can't actually catch this with MSan because it requires all code be
instrumented, so it needs a NO_ASM build which no disables that code. valgrind
doesn't notice either, possibly because there's some computation being done on
it. Still, we shouldn't use uninitialized memory.
Also get us closer to being instrumentable by MSan, but the runner tests will
need to build against an instrumented STL and I haven't tried that yet.
Change-Id: I2d65697a3269b5b022899f361730a85c51ecaa12
Reviewed-on: https://boringssl-review.googlesource.com/4760
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_current_cipher is documented by upstream to return the cipher actually
being used. However, because it reads s->session, it returns information
pertaining to the session to be offered if queried before ServerHello or early
in an abbreviated handshake.
Logic around s->session needs more comprehensive cleanup but for just this
function, defining it to be the current outgoing cipher is close to the current
semantics but for fixing the initial state (s->session->cipher is populated
when sending CCS). Store it in the SSL_AEAD_CTX which seems a natural place to
associate state pertaining to a connection half.
BUG=484744
Change-Id: Ife8db27a16615d0dbb2aec65359537243e08af7c
Reviewed-on: https://boringssl-review.googlesource.com/4733
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
There's multiple different versions of this check, between
s->s3->have_version (only works at some points), s->new_session (really
weird and not actually right), s->renegotiate (fails on the server
because it's always 2 after ClientHello), and s->s3->tmp.finish_md_len
(super confusing). Add an explicit bit with clear meaning. We'll prune
some of the others later; notably s->renegotiate can go away when
initiating renegotiation is removed.
This also tidies up the extensions to be consistent about whether
they're allowed during renego:
- ALPN failed to condition when accepting from the server, so even
if the client didn't advertise, the server could.
- SCTs now *are* allowed during renego. I think forbidding it was a
stray copy-paste. It wasn't consistently enforced in both ClientHello
and ServerHello, so the server could still supply it. Moreover, SCTs
are part of the certificate, so we should accept it wherever we accept
certificates, otherwise that session's state becomes incomplete. This
matches OCSP stapling. (NB: Chrome will never insert a session created
on renego into the session cache and won't accept a certificate
change, so this is moot anyway.)
Change-Id: Ic9bd1ebe2a2dbe75930ed0213bf3c8ed8170e251
Reviewed-on: https://boringssl-review.googlesource.com/4730
Reviewed-by: Adam Langley <agl@google.com>
As of crbug.com/484543, Chromium's SSLClientSocket is not sensitive to whether
renegotiation is enabled or not. Disable it by default and require consumers to
opt into enabling this protocol mistake.
BUG=429450
Change-Id: I2329068284dbb851da010ff1fd398df3d663bcc3
Reviewed-on: https://boringssl-review.googlesource.com/4723
Reviewed-by: Adam Langley <agl@google.com>
Nothing should call ssl3_setup_read_buffer or ssl3_setup_write_buffer unless it
intends to write into the buffer. This way buffer management can later be an
implementation detail of the record layer.
Change-Id: Idb0effba00e77c6169764843793f40ec37868b61
Reviewed-on: https://boringssl-review.googlesource.com/4687
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the extend bit. If extend is 0, we're reading a
new record, and rbuf.len is passed. Then it needs to get clamped by ssl3_read_n
post alignment anyway. If extend is 1, we're reading the rest of the current
record and max is always n. (For TLS, we actually could just read more, but not
for DTLS. Basically no one sets it on the TLS side of things, so instead, after
WebRTC's broken DTLS handling is fixed, read_ahead can go away altogether and
DTLS/TLS record layers can be separated.)
This removes ssl3_read_n's callers' dependency on ssl3_setup_read_buffer
setting up rbuf.len.
Change-Id: Iaf11535d01017507a52a33b19240f42984d6cf52
Reviewed-on: https://boringssl-review.googlesource.com/4686
Reviewed-by: Adam Langley <agl@google.com>
They date to https://rt.openssl.org/Ticket/Display.html?id=2533, but no
particularly good justification was given for them. It seems it was just a
bandaid because d1_pkt.c forgot to initialize the buffer. I went through
codesearch for all accesses to SSL3_BUFFER::buf and SSL::packet. They seem
appropriately guarded but for this one.
Change-Id: Ife4e7afdb7a7c137d6be4791542eb5de6dd5b1b6
Reviewed-on: https://boringssl-review.googlesource.com/4685
Reviewed-by: Adam Langley <agl@google.com>
s->packet points into the read buffer. It shouldn't leave a dangling pointer.
Change-Id: Ia7def2f50928ea9fca8cb0b69d614a92f9f47f57
Reviewed-on: https://boringssl-review.googlesource.com/4684
Reviewed-by: Adam Langley <agl@google.com>
There's no real need to ever disable it, so this is one fewer configuration to
test. It's still disabled for DTLS, but a follow-up will resolve that.
Change-Id: Ia95ad8c17ae8236ada516b3968a81c684bf37fd9
Reviewed-on: https://boringssl-review.googlesource.com/4683
Reviewed-by: Adam Langley <agl@google.com>
With DTLSv1_get_timeout de-ctrl-ified, the type checker complains about
OPENSSL_timeval. Existing callers all use the real timeval.
Now that OPENSSL_timeval is not included in any public structs, simply
forward-declare timeval itself in ssl.h and pull in winsock2.h in internal
headers.
Change-Id: Ieaf110e141578488048c28cdadb14881301a2ce1
Reviewed-on: https://boringssl-review.googlesource.com/4682
Reviewed-by: Adam Langley <agl@google.com>
Nothing ever uses those structs. This to avoid having any structs in the
public header which use struct timeval.
In doing so, move the protocol version constants up to ssl.h so dtls1.h
may be empty. This also removes TLS1_get_version and TLS1_get_client_version
as they're unused and depend on TLS1_VERSION_MAJOR. This still lets tls1.h
be included independently from ssl.h (though I don't think anyone ever includes
it...).
Change-Id: Ieac8b90cf94f7f1e742a88bb75c0ee0aa4b1414c
Reviewed-on: https://boringssl-review.googlesource.com/4681
Reviewed-by: Adam Langley <agl@google.com>
Per earlier review comment. The number is wrong anyway. (Neither version does
anything since init_buf is initialized to a large size and most functions don't
bother sizing it. Future work should rewrite all of this to use a CBB.)
Change-Id: I3b58672b328396459a34c6403f8bfb77c96efe9c
Reviewed-on: https://boringssl-review.googlesource.com/4650
Reviewed-by: Adam Langley <agl@google.com>
With SSL_get0_raw_cipherlist gone, there's no need to hold onto it.
Change-Id: I258f8bfe21cc354211a777660df680df6c49df2a
Reviewed-on: https://boringssl-review.googlesource.com/4616
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
clang-format got a little confused there.
Change-Id: I46df523e8a7813a2b4e243da3df22851b3393873
Reviewed-on: https://boringssl-review.googlesource.com/4614
Reviewed-by: Adam Langley <agl@google.com>
It's only called for client certificates with NULL. The interaction with
extra_certs is more obvious if we handle that case externally. (We
shouldn't attach extra_certs if there is no leaf.)
Change-Id: I9dc26f32f582be8c48a4da9aae0ceee8741813dc
Reviewed-on: https://boringssl-review.googlesource.com/4613
Reviewed-by: Adam Langley <agl@google.com>
Next batch. Mostly a bunch of deprecated things. This switches
SSL_CTX_set_tmp_rsa from always failing to always succeeding. The latter
is probably a safer behavior; a consumer may defensively set a temporary
RSA key. We'll successfully "set it" and just never use the result.
Change-Id: Idd3d6bf4fc1a20bc9a26605bb9c77c9f799f993c
Reviewed-on: https://boringssl-review.googlesource.com/4566
Reviewed-by: Adam Langley <agl@google.com>
This is an API wart that makes it easy to accidentally reuse the server
DHE half for every handshake. It's much simpler to have only one mode.
This mirrors the change made to the ECDHE code; align with that logic.
Change-Id: I47cccbb354d70127ab458f99a6d390b213e4e515
Reviewed-on: https://boringssl-review.googlesource.com/4565
Reviewed-by: Adam Langley <agl@google.com>
The only difference is SSL_clear_num_renegotiations which is never
called.
Change-Id: Id661c71e89d34d834349ad1f1a296e332606e6cc
Reviewed-on: https://boringssl-review.googlesource.com/4564
Reviewed-by: Adam Langley <agl@google.com>
The API is unused and rather awkward (mixes output parameters with
return values, special-case for NULL).
Change-Id: I4396f98534bf1271e53642f255e235cf82c7615a
Reviewed-on: https://boringssl-review.googlesource.com/4560
Reviewed-by: Adam Langley <agl@google.com>
Also size them based on the limits in the quantities they control (after
checking bounds at the API boundary).
BUG=404754
Change-Id: Id56ba45465a473a1a793244904310ef747f29b63
Reviewed-on: https://boringssl-review.googlesource.com/4559
Reviewed-by: Adam Langley <agl@google.com>
Not going to bother adding the compatibility macros. If they get ifdef'd
out, all the better.
BUG=404754
Change-Id: I26414d2fb84ee1f0b15a3b96c871949fe2bb7fb1
Reviewed-on: https://boringssl-review.googlesource.com/4558
Reviewed-by: Adam Langley <agl@google.com>
This is a bitmask, so the number of bits available should be the same
across all platforms.
Change-Id: I98e8d375fc7d042aeae1270174bc8fc63fba5dfc
Reviewed-on: https://boringssl-review.googlesource.com/4556
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
When tlsext_ticket_key_cb is used, the full bounds aren't known until
after the callback has returned.
Change-Id: I9e89ffae6944c74c4ca04e6aa28afd3ec80aa1d4
Reviewed-on: https://boringssl-review.googlesource.com/4552
Reviewed-by: Adam Langley <agl@google.com>
Probably we'll want some simpler server-side API later. But, as things
stand, all consumers of these functions are #ifdef'd out and have to be
because the requisite OCSP_RESPONSE types are gone.
Change-Id: Ic82b2ab3feca14c56656da3ceb3651819e3eb377
Reviewed-on: https://boringssl-review.googlesource.com/4551
Reviewed-by: Adam Langley <agl@google.com>
It's unused, but for some old #ifdef branch in wpa_supplicant's EAP-FAST
hack, before SSL_set_session_ticket_ext_cb existed.
Change-Id: Ifc11fea2f6434354f756e04e5fc3ed5f1692025e
Reviewed-on: https://boringssl-review.googlesource.com/4550
Reviewed-by: Adam Langley <agl@google.com>
“ECDHE-PSK-WITH-AES-128-GCM-SHA256” doesn't follow the standard naming
for OpenSSL: it was “-WITH-” in it and has a hyphen between “AES” and
“128”. This change fixes that.
Change-Id: I7465b1ec83e7d5b9a60d8ca589808aeee10c174e
Reviewed-on: https://boringssl-review.googlesource.com/4601
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
SSL_get0_chain_certs calls a ctrl function with
SSL_CTRL_GET_CHAIN_CERTS. The switch failed to set a positive return
value and so the call always appeared to fail.
Change-Id: If40ca7840197a9748fd69b761fd905f44bb79835
Reviewed-on: https://boringssl-review.googlesource.com/4521
Reviewed-by: Adam Langley <agl@google.com>
