Some combination of Chromium's copy of clang and Chromium's Linux sysroot
doesn't like syntax. It complains that "chosen constructor is explicit in
copy-initialization".
Change-Id: Ied6bc17b19421998f926483742510c81f732566b
Reviewed-on: https://boringssl-review.googlesource.com/6930
Reviewed-by: Adam Langley <agl@google.com>
This change imports the following changes from upstream:
6281abc79623419eae6a64768c478272d5d3a426
dfd3322d72a2d49f597b86dab6f37a8cf0f26dbf
f34b095fab1569d093b639bfcc9a77d6020148ff
21376d8ae310cf0455ca2b73c8e9f77cafeb28dd
25efcb44ac88ab34f60047e16a96c9462fad39c1
56353962e7da7e385c3d577581ccc3015ed6d1dc
39c76ceb2d3e51eaff95e04d6e4448f685718f8d
a3d74afcae435c549de8dbaa219fcb30491c1bfb
These contain the “altchains” functionality which allows OpenSSL to
backtrack when chain building.
Change-Id: I8d4bc2ac67b90091f9d46e7355cae878b4ccf37d
Reviewed-on: https://boringssl-review.googlesource.com/6905
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL upstream did a bulk reformat. We still have some files that have
the old OpenSSL style and this makes applying patches to them more
manual, and thus more error-prone, than it should be.
This change is the result of running
util/openssl-format-source -v -c .
in the enumerated directories. A few files were in BoringSSL style and
have not been touched.
This change should be formatting only; no semantic difference.
Change-Id: I75ced2970ae22b9facb930a79798350a09c5111e
Reviewed-on: https://boringssl-review.googlesource.com/6904
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A lot of commented-out code we haven't had to put them back, so these
can go now. Also remove the TODO about OAEP having a weird API. The API
is wrong, but upstream's shipped it with the wrong API, so that's what
it is now.
Change-Id: I7da607cf2d877cbede41ccdada31380f812f6dfa
Reviewed-on: https://boringssl-review.googlesource.com/6763
Reviewed-by: Adam Langley <agl@google.com>
The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of |ctx->untrusted|. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.
With regards to the second of these, we should discount this - it should
not be supported to allow this.
With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.
Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation.
(Imported from upstream's 692f07c3e0c04180b56febc2feb57cd94395a7a2.)
Change-Id: I971f1a305f12bbf9f4ae955313d5557368f0d374
Reviewed-on: https://boringssl-review.googlesource.com/6760
Reviewed-by: Adam Langley <agl@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Until we've done away with the d2i_* stack completely, boundaries need
to be mindful of the type mismatch. d2i_* takes a long, not a size_t.
Change-Id: If02f9ca2cfde02d0929ac18275d09bf5df400f3a
Reviewed-on: https://boringssl-review.googlesource.com/6491
Reviewed-by: Adam Langley <agl@google.com>
There's a few things that will be kind of a nuisance and possibly not worth it
(crypto/asn1 dumps a lot of undeclared things, etc.). But it caught some
mistakes. Even without the warning, making sure to include the externs before
defining a function helps catch type mismatches.
Change-Id: I3dab282aaba6023e7cebc94ed7a767a5d7446b08
Reviewed-on: https://boringssl-review.googlesource.com/6484
Reviewed-by: Adam Langley <agl@google.com>
It's very annoying having to remember the right incant every time I want
to switch around between my build, build-release, build-asan, etc.,
output directories.
Unfortunately, this target is pretty unfriendly without CMake 3.2+ (and
Ninja 1.5+). This combination gives a USES_TERMINAL flag to
add_custom_target which uses Ninja's "console" pool, otherwise the
output buffering gets in the way. Ubuntu LTS is still on an older CMake,
so do a version check in the meantime.
CMake also has its own test mechanism (CTest), but this doesn't use it.
It seems to prefer knowing what all the tests are and then tries to do
its own output management and parallelizing and such. We already have
our own runners. all_tests.go could actually be converted tidily, but
generate_build_files.py also needs to read it, and runner.go has very
specific needs.
Naming the target ninja -C build test would be nice, but CTest squats
that name and CMake grumps when you use a reserved name, so I've gone
with run_tests.
Change-Id: Ibd20ebd50febe1b4e91bb19921f3bbbd9fbcf66c
Reviewed-on: https://boringssl-review.googlesource.com/6270
Reviewed-by: Adam Langley <alangley@gmail.com>
There's still a size_t/int cast due to the mass of legacy code, but at
least avoid the most egregious case.
Change-Id: Icc1741366e09190216e762ca7ef42ecfc3215edc
Reviewed-on: https://boringssl-review.googlesource.com/6345
Reviewed-by: Adam Langley <alangley@gmail.com>
See also upstream's b62a2f8a373d1889672599834acf95161f2883ce, though
upstream left the lock calls in by accident. Otherwise, the change
appears to be correct. I see no side effects of x509_object_idx_cnt
beyond the return value and *pnmatch, both of which are discarded.
Change-Id: Ic2124a733a61591bd1b264164726ce6c69ce10c9
Reviewed-on: https://boringssl-review.googlesource.com/6347
Reviewed-by: Adam Langley <alangley@gmail.com>
CRYPTO_MUTEX_init needs a CRYPTO_MUTEX_cleanup. Also a pile of problems
with x509_lu.c I noticed trying to import some upstream change.
Change-Id: I029a65cd2d30aa31f4832e8fbfe5b2ea0dbc66fe
Reviewed-on: https://boringssl-review.googlesource.com/6346
Reviewed-by: Adam Langley <alangley@gmail.com>
(Imported from upstream's 728bcd59d3d41e152aead0d15acc51a8958536d3.)
Actually this one was reported by us, but the commit message doesn't
mention this.
This is slightly modified from upstream's version to fix some problems
noticed in import. Specifically one of d2i_X509_AUX's success paths is
bust and d2i_PrivateKey still updates on one error path. Resolve the
latter by changing both it and d2i_AutoPrivateKey to explicitly hit the
error path on ret == NULL. This lets us remove the NULL check in
d2i_AutoPrivateKey.
We'll want to report the problems back upstream.
Change-Id: Ifcfc965ca6d5ec0a08ac154854bd351cafbaba25
Reviewed-on: https://boringssl-review.googlesource.com/5948
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's c8491de393639dbc4508306b7dbedb3872b74293.
Change-Id: I017fb137d6d93b6abb82fdb03f02be8292963d0d
Reviewed-on: https://boringssl-review.googlesource.com/5767
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
If get_issuer fails, some of these calls return rather than jumping to common
cleanup code.
Change-Id: Iacd59747fb11e9bfaae86f2eeed88798ee08203e
Reviewed-on: https://boringssl-review.googlesource.com/5711
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 25efcb44ac88ab34f60047e16a96c9462fad39c1 and
56353962e7da7e385c3d577581ccc3015ed6d1dc.)
Change-Id: I2ff22fc9da23868de02e6f31c50a3f1d0c6dec1a
Reviewed-on: https://boringssl-review.googlesource.com/5710
Reviewed-by: Adam Langley <agl@google.com>
In the ancient times, before ex_data and OpenSSL, SSLeay supported a
single app_data slot in various types. Later app_data begat ex_data, and
app_data was replaced by compatibility macros to ex_data index zero.
Today, app_data is still in use, but ex_data never reserved index zero
for app_data. This causes some danger where, if the first ex_data
registration did not use NULL callbacks, the registration's callbacks
would collide with app_data.
Instead, add an option to the types with app_data to reserve index zero.
Also switch SSL_get_ex_data_X509_STORE_CTX_idx to always return zero
rather than allocate a new one. It used to be that you used
X509_STORE_CTX_get_app_data. I only found one consumer that we probably
don't care about, but, to be safe and since it's easy, go with the
conservative option. (Although SSL_get_ex_data_X509_STORE_CTX_idx wasn't
guaranteed to alias app_data, in practice it always did. No consumer
ever calls X509_STORE_CTX_get_ex_new_index.)
Change-Id: Ie75b279d60aefd003ffef103f99021c5d696a5e9
Reviewed-on: https://boringssl-review.googlesource.com/5313
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.
CVE-2015-1789
(Imported from upstream's 9bc3665ac9e3c36f7762acd3691e1115d250b030)
Change-Id: I2091b2d1b691c177d58dc7960e2e7eb4c97b1f69
Reviewed-on: https://boringssl-review.googlesource.com/5124
Reviewed-by: Adam Langley <agl@google.com>
Currently far from passing and I haven't even tried with a leak checker yet.
Also bn_test is slow.
Change-Id: I4fe2783aa5f7897839ca846062ae7e4a367d2469
Reviewed-on: https://boringssl-review.googlesource.com/4794
Reviewed-by: Adam Langley <agl@google.com>
These ASN.1 macros are the last references to the old-style OpenSSL
locks that remain. The ASN.1 reference count handling was changed in a
previous commit to use |CRYPTO_refcount_*| so these lock references were
unused anyway.
Change-Id: I1b27eef140723050a8e6878a1bea11da3409d0eb
Reviewed-on: https://boringssl-review.googlesource.com/4776
Reviewed-by: Adam Langley <agl@google.com>
|SSL_CTX| and |X509_STORE| have grown their own locks. Several static
locks have been added to hack around not being able to use a
|CRYPTO_once_t| in public headers. Lastly, support for calling
|SSL_CTX_set_generate_session_id| concurrently with active connections
has been removed. No other property of an |SSL_CTX| works like that.
Change-Id: Iff5fe3ee3fdd6ea9c9daee96f850b107ad8a6bca
Reviewed-on: https://boringssl-review.googlesource.com/4775
Reviewed-by: Adam Langley <agl@google.com>
This change converts the reference counts in crypto/ to use
|CRYPTO_refcount_t|. The reference counts in |X509_PKEY| and |X509_INFO|
were never actually used and so were dropped.
Change-Id: I75d572cdac1f8c1083c482e29c9519282d7fd16c
Reviewed-on: https://boringssl-review.googlesource.com/4772
Reviewed-by: Adam Langley <agl@google.com>
This is consistent with C's free function and upstream's convention.
Change-Id: I83f6e2f5824e28f69a9916e580dc2d8cb3b94234
Reviewed-on: https://boringssl-review.googlesource.com/4512
Reviewed-by: Adam Langley <agl@google.com>
Instead, each module defines a static CRYPTO_EX_DATA_CLASS to hold the values.
This makes CRYPTO_cleanup_all_ex_data a no-op as spreading the
CRYPTO_EX_DATA_CLASSes across modules (and across crypto and ssl) makes cleanup
slightly trickier. We can make it do something if needbe, but it's probably not
worth the trouble.
Change-Id: Ib6f6fd39a51d8ba88649f0fa29c66db540610c76
Reviewed-on: https://boringssl-review.googlesource.com/4375
Reviewed-by: Adam Langley <agl@google.com>
No functions for using it were ever added.
Change-Id: Iaee6e5bc8254a740435ccdcdbd715b851d8a0dce
Reviewed-on: https://boringssl-review.googlesource.com/4374
Reviewed-by: Adam Langley <agl@google.com>
Callers are required to use the wrappers now. They still need OPENSSL_EXPORT
since crypto and ssl get built separately in the standalone shared library
build.
Change-Id: I61186964e6099b9b589c4cd45b8314dcb2210c89
Reviewed-on: https://boringssl-review.googlesource.com/4372
Reviewed-by: Adam Langley <agl@google.com>
Beyond generally eliminating unnecessary includes, eliminate as many
includes of headers that declare/define particularly error-prone
functionality like strlen, malloc, and free. crypto/err/internal.h was
added to remove the dependency on openssl/thread.h from the public
openssl/err.h header. The include of <stdlib.h> in openssl/mem.h was
retained since it defines OPENSSL_malloc and friends as macros around
the stdlib.h functions. The public x509.h, x509v3.h, and ssl.h headers
were not changed in order to minimize breakage of source compatibility
with external code.
Change-Id: I0d264b73ad0a720587774430b2ab8f8275960329
Reviewed-on: https://boringssl-review.googlesource.com/4220
Reviewed-by: Adam Langley <agl@google.com>
C4701 is "potentially uninitialized local variable 'buf' used". It
sometimes results in false positives, which can now be suppressed
using the macro OPENSSL_SUPPRESS_POTENTIALLY_UNINITIALIZED_WARNINGS.
Change-Id: I15068b5a48e1c704702e7752982b9ead855e7633
Reviewed-on: https://boringssl-review.googlesource.com/3160
Reviewed-by: Adam Langley <agl@google.com>
Reported by the LibreSSL project as a follow on to CVE-2015-0209
(Imported from upstream's 5e5d53d341fd9a9b9cc0a58eb3690832ca7a511f.)
Change-Id: Ic2e5dc5c96e316c55f76bedc6ea55b416be3287a
Reviewed-on: https://boringssl-review.googlesource.com/4049
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 0b142f022e2c5072295e00ebc11c5b707a726d74.)
Modified further because these ought to just be BIO_puts.
Change-Id: I8b70d70d0f626bb19b455adb4f0e08bacf453c1d
Reviewed-on: https://boringssl-review.googlesource.com/4002
Reviewed-by: Adam Langley <agl@google.com>
(There are times when I actually miss C++ templates.)
Change-Id: I3db56e4946ae4fb919105fa33e2cfce3c7542d37
Reviewed-on: https://boringssl-review.googlesource.com/3700
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7b6acc9004beb7b7090de1837814ccdff2e9930e
Reviewed-on: https://boringssl-review.googlesource.com/3680
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called in outside code. This too seems to be a remnant of the DSA
PKIX optional parameter stuff. This is confirmed both by a removed comment and
by the brief documentation at http://www.umich.edu/~x509/ssleay/x509_pkey.html
RFC 5480 does not allow ECDSA keys to be missing parameters, so this logic is
incorrect for ECDSA anyway. It was also failing to check
EVP_PKEY_copy_parameters' return value. And that logic looks pretty suspect if
you have a chain made up multiple certificate types.
Change-Id: Id6c60659a0162356c7f3eae5c797047366baae1c
Reviewed-on: https://boringssl-review.googlesource.com/3485
Reviewed-by: Adam Langley <agl@google.com>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
(Imported from upstream's e83c913723fac7432a7706812f12394aaa00e8ce.)
Change-Id: Id0fc11773a0cee8933978cd4bdbd8251fd7cfb5f
Pass address of X509_VERIFY_PARAM_ID peername to X509_check_host().
(Imported from upstream's 55fe56837a65ff505b492aa6aee748bf5fa91fec.)
Change-Id: Ic21bfb361b8eb25677c4c2175882fa95ea44fc31
(Imported from upstream's 8abffa4a73fcbf6536e0a42d736ed9211a8204ea,
9624b50d51de25bb2e3a72e81fe45032d80ea5c2 and
41e3ebd5abacfdf98461cdeb6fa97a4175b7aad3.)
Change-Id: Ic9099eb5704b19b4500229e89351371cc6184f9d
