arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Android (on OS X) builds with NO_ASM and was getting both generic.c and
x86_64-gcc.c. This change updates the latter so that it's excluded in
NO_ASM builds.
Change-Id: I1f0e1c5e551eed9c575ce632ec3016fce7ec9d2e
Reviewed-on: https://boringssl-review.googlesource.com/4741
Reviewed-by: Adam Langley <agl@google.com>
This facilitates "universal" builds, ones that target multiple
architectures, e.g. ARMv5 through ARMv7.
(Imported from upstream's c1669e1c205dc8e695fb0c10a655f434e758b9f7)
This is a change from a while ago which was a source of divergence between our
perlasm and upstream's. This change in upstream came with the following comment
in Configure:
Note that -march is not among compiler options in below linux-armv4
target line. Not specifying one is intentional to give you choice to:
a) rely on your compiler default by not specifying one;
b) specify your target platform explicitly for optimal performance,
e.g. -march=armv6 or -march=armv7-a;
c) build "universal" binary that targets *range* of platforms by
specifying minimum and maximum supported architecture;
As for c) option. It actually makes no sense to specify maximum to be
less than ARMv7, because it's the least requirement for run-time
switch between platform-specific code paths. And without run-time
switch performance would be equivalent to one for minimum. Secondly,
there are some natural limitations that you'd have to accept and
respect. Most notably you can *not* build "universal" binary for
big-endian platform. This is because ARMv7 processor always picks
instructions in little-endian order. Another similar limitation is
that -mthumb can't "cross" -march=armv6t2 boundary, because that's
where it became Thumb-2. Well, this limitation is a bit artificial,
because it's not really impossible, but it's deemed too tricky to
support. And of course you have to be sure that your binutils are
actually up to the task of handling maximum target platform.
Change-Id: Ie5f674d603393f0a1354a0d0973987484a4a650c
Reviewed-on: https://boringssl-review.googlesource.com/4488
Reviewed-by: Adam Langley <agl@google.com>
Pointer out and suggested by: Ard Biesheuvel.
(Imported from upstream's 5dcf70a1c57c2019bfad640fe14fd4a73212860a)
This is from a while ago, but it's one source of divergence between our copy of
these files and master's.
Change-Id: I6525a27f25eb86a92420c32996af47ecc42ee020
Reviewed-on: https://boringssl-review.googlesource.com/4487
Reviewed-by: Adam Langley <agl@google.com>
This reverts the non-ARM portions of 97999919bb.
x86_64 perlasm already makes .globl imply .hidden. (Confusingly, ARM does not.)
Since we don't need it, revert those to minimize divergence with upstream.
Change-Id: I2d205cfb1183e65d4f18a62bde187d206b1a96de
Reviewed-on: https://boringssl-review.googlesource.com/3610
Reviewed-by: Adam Langley <agl@google.com>
We are leaking asm symbols in Android builds because the asm code isn't
affected by -fvisibility=hidden. This change hides all asm symbols.
This assumes that no asm symbols are public API and that should be true.
Some points to note:
In crypto/rc4/asm/rc4-md5-x86_64.pl there are |RC4_set_key| and
|RC4_options| functions which aren't getting marked as hidden. That's
because those functions aren't actually ever generated. (I'm just trying
to minimise drift with upstream here.)
In crypto/rc4/asm/rc4-x86_64.pl there's |RC4_options| which is "public"
API, except that we've never had it in the header files. So I've just
deleted it. Since we have an internal caller, we'll probably have to put
it back in the future, but it can just be done in rc4.c to save
problems.
BUG=448386
Change-Id: I3846617a0e3d73ec9e5ec3638a53364adbbc6260
Reviewed-on: https://boringssl-review.googlesource.com/3520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is an import from ARM. Without this, one of the Android builds of
BoringSSL was failing with:
(sha512-armv4.o): requires unsupported dynamic reloc R_ARM_REL32; recompile with -fPIC
This is (I believe) a very misleading error message. The R_ARM_REL32
relocation type is the correct type for position independent code. But
unless the target symbol is hidden then the linker doesn't know that
it's not going to be overridden by a different ELF module.
Chromium probably gets away with this because of different default
compiler flags than Android.
Change-Id: I967eabc4d6b33d1e6635caaf6e7a306e4e77c101
Reviewed-on: https://boringssl-review.googlesource.com/3471
Reviewed-by: Adam Langley <agl@google.com>
A handful of latin-1 codepoints existed a trio of files. This change
switches the encoding to UTF-8.
Change-Id: I00309e4d1ee3101e0cc02abc53196eafa17a4fa5
(Imported from upstream's b3d7294976c58e0e05d0ee44a0e7c9c3b8515e05.)
May as well avoid diverging.
Change-Id: I3edec4fe15b492dd3bfb3146a8944acc6575f861
Reviewed-on: https://boringssl-review.googlesource.com/3020
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's ef908777218bd4a362dbe9cebb8e18fa8ab384cf.)
Change-Id: Id9b288d230cc9d8ab308690a18e687e2132e3293
Reviewed-on: https://boringssl-review.googlesource.com/2168
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
generic.c still needs to include generic implementations in Win64.
Those are currently done with inline assembly and won't work on
MSVC.
Change-Id: Ifeb5470872d8c97b2ccffeae6f3ccb5661051de3
Reviewed-on: https://boringssl-review.googlesource.com/2102
Reviewed-by: Adam Langley <agl@google.com>
bn_get_bits5 always reads two bytes, even when it doesn't need to. For some
sizes of |p|, this can result in reading just past the edge of the array.
Unroll the first iteration of the loop and avoid reading out of bounds.
Replace bn_get_bits5 altogether in C as it's not doing anything interesting.
Change-Id: Ibcc8cea7d9c644a2639445396455da47fe869a5c
Reviewed-on: https://boringssl-review.googlesource.com/1393
Reviewed-by: Adam Langley <agl@google.com>
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 912f08dd5ed4f68fb275f3b2db828349fcffba14,
52f856526c46ee80ef4c8c37844f084423a3eff7 and
377551b9c4e12aa7846f4d80cf3604f2e396c964)
Change-Id: Ic2bf93371f6d246818729810e7a45b3f0021845a
This ensures high performance is situations when assembler supports
AVX2, but not AD*X.
(Imported from upstream's 82a9dafe32e1e39b5adff18f9061e43d8df3d3c5)
Change-Id: Ie67f49a1c5467807139b6a8a0d4e62162d8a974f
(This appears to be the case with upstream too, it's not that BoringSSL
is missing optimisations from what I can see.)
Change-Id: I0e54762ef0d09e60994ec82c5cca1ff0b3b23ea4
Reviewed-on: https://boringssl-review.googlesource.com/1080
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(The issue was reported by Shay Gueron.)
The final reduction in Montgomery multiplication computes if (X >= m) then X =
X - m else X = X
In OpenSSL, this was done by computing T = X - m, doing a constant-time
selection of the *addresses* of X and T, and loading from the resulting
address. But this is not cache-neutral.
This patch changes the behaviour by loading both X and T into registers, and
doing a constant-time selection of the *values*.
TODO(fork): only some of the fixes from the original patch still apply to
the 1.0.2 code.
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
