Partially fixes build with -Wmissing-prototypes -Wmissing-declarations.
Change-Id: I6048f5b7ef31560399b25ed9880156bc7d8abac2
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7511
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also fix a long/unsigned-long cast. (ssl_get_message returns long. It really
shouldn't, but ssl_get_message needs much more work than just a long -> size_t
change, so leave it as long for now.)
Change-Id: Ice8741f62a138c0f35ca735eedb541440f57e114
Reviewed-on: https://boringssl-review.googlesource.com/7457
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Found by libFuzzer.
Change-Id: Ifa343a184cc65f71fb6591d290b2d47d24a2be80
Reviewed-on: https://boringssl-review.googlesource.com/7456
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL historically made some poor API decisions. Rather than returning a
status enum in SSL_read, etc., these functions must be paired with
SSL_get_error which determines the cause of the last error's failure. This
requires SSL_read communicate with SSL_get_error with some stateful flag,
rwstate.
Further, probably as workarounds for bugs elsewhere, SSL_get_error does not
trust rwstate. Among other quirks, if the error queue is non-empty,
SSL_get_error overrides rwstate and returns a value based on that. This
requires that SSL_read, etc., be called with an empty error queue. (Or we hit
one of the spurious ERR_clear_error calls in the handshake state machine,
likely added as further self-workarounds.)
Since requiring callers consistently clear the error queue everywhere is
unreasonable (crbug.com/567501), clear ERR_clear_error *once* at the entry
point. Until/unless[*] we make SSL_get_error sane, this is the most reasonable
way to get to the point that clearing the error queue on error is optional.
With those in place, the calls in the handshake state machine are no longer
needed. (I suspect all the ERR_clear_system_error calls can also go, but I'll
investigate and think about that separately.)
[*] I'm not even sure it's possible anymore, thanks to the possibility of
BIO_write pushing to the error queue.
BUG=567501,593963
Change-Id: I564ace199e5a4a74b2554ad3335e99cd17120741
Reviewed-on: https://boringssl-review.googlesource.com/7455
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Align all unexpected messages on SSL_R_UNEXPECTED_MESSAGE. Make the SSL 3.0
case the exceptional case. In doing so, make sure the SSL 3.0
SSL_VERIFY_FAIL_IF_NO_PEER_CERT case has its own test as that's a different
handshake shape.
Change-Id: I1a539165093fbdf33e2c1b25142f058aa1a71d83
Reviewed-on: https://boringssl-review.googlesource.com/7421
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If we're doing substring matching, we should at least include the delimiter.
Change-Id: I98bee568140d0304bbb6a2788333dbfca044114c
Reviewed-on: https://boringssl-review.googlesource.com/7420
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The old logic was quite messy and grew a number of no-ops over the
years. It was also unreasonably fond of the variable name |i|.
The current logic wasn't even correct. It's overly fond of sending no
certificate, even when it pushes errors on the error queue for a fatal
error.
Change-Id: Ie5b2b38dd309f535af1d17fa261da7dc23185866
Reviewed-on: https://boringssl-review.googlesource.com/7418
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS, you never skip the Certificate message. It may be empty, but its
presence is determined by CertificateRequest. (This is sensible.)
In SSL 3.0, the client omits the Certificate message. This means you need to
probe and may receive either Certificate or ClientKeyExchange (thankfully,
ClientKeyExchange is not optional, or we'd have to probe at ChangeCipherSpec).
We didn't have test coverage for this, despite some of this logic being a
little subtle asynchronously. Fix this.
Change-Id: I149490ae5506f02fa0136cb41f8fea381637bf45
Reviewed-on: https://boringssl-review.googlesource.com/7419
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also add no-certificate cases to the state machine coverage tests.
Change-Id: I88a80df6f3ea69aabc978dd356abcb9e309e156f
Reviewed-on: https://boringssl-review.googlesource.com/7417
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I5b38e2938811520f52ece6055245248c80308b4d
Reviewed-on: https://boringssl-review.googlesource.com/7416
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If a Read or Write blocks for too long, time out the operation. Otherwise, some
kinds of test failures result in hangs, which prevent the test harness from
progressing. (Notably, OpenSSL currently has a lot of those failure modes and
upstream expressed interest in being able to run the tests to completion.)
Go's APIs want you to send an absolute timeout, to avoid problems when a Read
is split into lots of little Reads. But we actively want the timer to reset in
that case, so this needs a trivial adapter.
The default timeout is set at 15 seconds for now. If this becomes a problem, we
can extend it or build a more robust deadlock detector given an out-of-band
channel (shim tells runner when it's waiting on data, abort if we're also
waiting on data at the same time). But I don't think we'll need that
complexity. 15 seconds appears fine for both valgrind and running tests on a
Nexus 4.
BUG=460189
Change-Id: I6463fd36058427d883b526044da1bbefba851785
Reviewed-on: https://boringssl-review.googlesource.com/7380
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In OpenSSL, they create socket BIOs. The distinction isn't important on UNIX.
On Windows, file descriptors are provided by the C runtime, while sockets must
use separate recv and send APIs. Document how these APIs are intended to work.
Also add a TODO to resolve the SOCKET vs int thing. This code assumes that
Windows HANDLEs only use the bottom 32 bits of precision. (Which is currently
true and probably will continue to be true for the foreseeable future[*], but
it'd be nice to do this right.)
Thanks to Gisle Vanem and Daniel Stenberg for reporting the bug.
[*] Both so Windows can continue to run 32-bit programs and because of all the
random UNIX software, like OpenSSL and ourselves, out there which happily
assumes sockets are ints.
Change-Id: I67408c218572228cb1a7d269892513cda4261c82
Reviewed-on: https://boringssl-review.googlesource.com/7333
Reviewed-by: David Benjamin <davidben@google.com>
This change adds a |SSL_CTX_set_private_key_method| method that sets key_method on a SSL_CTX's cert.
It allows the private key method to be set once and inherited.
A copy of key_method (from SSL_CTX's cert to SSL's cert) is added in |ssl_cert_dup|.
Change-Id: Icb62e9055e689cfe2d5caa3a638797120634b63f
Reviewed-on: https://boringssl-review.googlesource.com/7340
Reviewed-by: David Benjamin <davidben@google.com>
I went with NID_x25519 to match NID_sha1 and friends in being lowercase.
However, upstream seems to have since chosen NID_X25519. Match their
name.
Change-Id: Icc7b183a2e2dfbe42c88e08e538fcbd242478ac3
Reviewed-on: https://boringssl-review.googlesource.com/7331
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I9540c931b6cdd4d65fa9ebfc52e1770d2174abd2
Reviewed-on: https://boringssl-review.googlesource.com/7330
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This is in preparation for adding AES_256_GCM in Chromium below AES_128_GCM.
For now, AES_128_GCM is preferable over AES_256_GCM for performance reasons.
While I'm here, swap the order of 3DES and RC4. Chromium has already disabled
RC4, but the default order should probably reflect that until we can delete it
altogether.
BUG=591516
Change-Id: I1b4df0c0b7897930be726fb8321cee59b5d93a6d
Reviewed-on: https://boringssl-review.googlesource.com/7296
Reviewed-by: Adam Langley <agl@google.com>
EC point format negotiation is dead and gone.
Change-Id: If13ed7c5f31b64df2bbe90c018b2683b6371a980
Reviewed-on: https://boringssl-review.googlesource.com/7293
Reviewed-by: Adam Langley <agl@google.com>
This can be used to get some initial corpus for fuzzing.
Change-Id: Ifcd365995b54d202c4a2674f49e7b28515f36025
Reviewed-on: https://boringssl-review.googlesource.com/7289
Reviewed-by: Adam Langley <agl@google.com>
It's useful to make sure our fuzzer mode works. Not all tests pass, but most
do. (Notably the negative tests for everything we've disabled don't work.) We
can also use then use runner to record fuzzer-mode transcripts with the ciphers
correctly nulled.
Change-Id: Ie41230d654970ce6cf612c0a9d3adf01005522c6
Reviewed-on: https://boringssl-review.googlesource.com/7288
Reviewed-by: Adam Langley <agl@google.com>
Both sides' signature and Finished checks still occur, but the results
are ignored. Also, all ciphers behave like the NULL cipher.
Conveniently, this isn't that much code since all ciphers and their size
computations funnel into SSL_AEAD_CTX.
This does carry some risk that we'll mess up this code. Up until now, we've
tried to avoid test-only changes to the SSL stack.
There is little risk that anyone will ship a BORINGSSL_UNSAFE_FUZZER_MODE build
for anything since it doesn't interop anyway. There is some risk that we'll end
up messing up the disableable checks. However, both skipped checks have
negative tests in runner (see tests that set InvalidSKXSignature and
BadFinished). For good measure, I've added a server variant of the existing
BadFinished test to this CL, although they hit the same code.
Change-Id: I37f6b4d62b43bc08fab7411965589b423d86f4b8
Reviewed-on: https://boringssl-review.googlesource.com/7287
Reviewed-by: Adam Langley <agl@google.com>
Node.js calls it but handles it failing. Since we have abstracted this
in the state machine, we mightn't even be using a cipher suite where the
server's key can be expressed as an EVP_PKEY.
Change-Id: Ic3f013dc9bcd7170a9eb2c7535378d478b985849
Reviewed-on: https://boringssl-review.googlesource.com/7272
Reviewed-by: David Benjamin <davidben@google.com>
This was dropped in d27441a9cb due to lack
of use, but node.js now needs it.
Change-Id: I1e207d4b46fc746cfae309a0ea7bbbc04ea785e8
Reviewed-on: https://boringssl-review.googlesource.com/7270
Reviewed-by: David Benjamin <davidben@google.com>
Found by libFuzzer combined with some experimental unsafe-fuzzer-mode patches
(to be uploaded once I've cleaned them up a bit) to disable all those pesky
cryptographic checks in the protocol.
Change-Id: I9153164fa56a0c2262c4740a3236c2b49a596b1b
Reviewed-on: https://boringssl-review.googlesource.com/7282
Reviewed-by: Adam Langley <agl@google.com>
If LeakSanitizer fires something on a test that's expected to fail, runner will
swallow it. Have stderr output always end in a "--- DONE ---" marker and treat
all output following that as a test failure.
Change-Id: Ia8fd9dfcaf48dd23972ab8f906d240bcb6badfe2
Reviewed-on: https://boringssl-review.googlesource.com/7281
Reviewed-by: Adam Langley <agl@google.com>
Sending close_notify during init causes some problems for some
applications so we instead revert to the previous behavior returning an
error instead of silently passing.
(Imported from upstream's 64193c8218540499984cd63cda41f3cd491f3f59)
Change-Id: I5efed1ce152197d291e6c7ece6e5dbb8f3ad867d
Reviewed-on: https://boringssl-review.googlesource.com/7232
Reviewed-by: David Benjamin <davidben@google.com>
This stub returns an empty string rather than NULL (since some callers
might assume that NULL means there are no shared ciphers).
Change-Id: I9537fa0a80c76559b293d8518599b68fd9977dd8
Reviewed-on: https://boringssl-review.googlesource.com/7196
Reviewed-by: David Benjamin <davidben@google.com>
BIO_FLAGS_MEM_RDONLY keeps the invariant.
(Imported from upstream's a38a159bfcbc94214dda00e0e6b1fc6454a23b78)
Change-Id: I4cb35615d76b77929915e370dbb7fec1455da069
Reviewed-on: https://boringssl-review.googlesource.com/7214
Reviewed-by: David Benjamin <davidben@google.com>
Calling SSL_shutdown while in init previously gave a "1" response,
meaning everything was successfully closed down (even though it
wasn't). Better is to send our close_notify, but fail when trying to
receive one.
The problem with doing a shutdown while in the middle of a handshake
is that once our close_notify is sent we shouldn't really do anything
else (including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS
before acting on our close_notify - so we won't be able to read it
because we're not acting on CCS messages!
(Imported from upstream's f73c737c7ac908c5d6407c419769123392a3b0a9)
Change-Id: Iaad5c5e38983456d3697c955522a89919628024b
Reviewed-on: https://boringssl-review.googlesource.com/7207
Reviewed-by: David Benjamin <davidben@google.com>
(Imported from upstream's 4d6fe78f65be650c84e14777c90e7a088f7a44ce)
Change-Id: Id28e0d49da2490e454dcb8603ccb93a506dfafaf
Reviewed-on: https://boringssl-review.googlesource.com/7206
Reviewed-by: David Benjamin <davidben@google.com>
While it's always safe to read |SSL_MAX_SSL_SESSION_ID_LENGTH| bytes
from an |SSL_SESSION|'s |session_id| array, the hash function would do
so with without considering if all those bytes had been written to.
This change checks |session_id_length| before possibly reading
uninitialised memory. Since the result of the hash function was already
attacker controlled, and since a lookup of a short session ID will
always fail, it doesn't appear that this is anything more than a clean
up.
BUG=586800
Change-Id: I5f59f245b51477d6d4fa2cdc20d40bb6b4a3eae7
Reviewed-on: https://boringssl-review.googlesource.com/7150
Reviewed-by: David Benjamin <davidben@google.com>
I switched up the endianness. Add some tests to make sure those work right.
Also tweak the DTLS semantics. SSL_get_read_sequence should return the highest
sequence number received so far. Include the epoch number in both so we don't
need a second API for it.
Change-Id: I9901a1665b41224c46fadb7ce0b0881dcb466bcc
Reviewed-on: https://boringssl-review.googlesource.com/7141
Reviewed-by: Adam Langley <agl@google.com>
This is significantly less of a nuisance than having to explicitly type out
kRule5, kExpected5.
Change-Id: I61820c26a159c71e09000fbe0bf91e30da42205e
Reviewed-on: https://boringssl-review.googlesource.com/7000
Reviewed-by: Adam Langley <agl@google.com>
C has implicit conversion of |void *| to other pointer types so these
casts are unnecessary. Clean them up to make the code easier to read
and to make it easier to find dangerous casts.
Change-Id: I26988a672e8ed4d69c75cfbb284413999b475464
Reviewed-on: https://boringssl-review.googlesource.com/7102
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise it still thinks this is an RFC 5114 prime and kicks in the (now
incorrect) validity check.
Change-Id: Ie78514211927f1f2d2549958621cb7896f68b5ce
Reviewed-on: https://boringssl-review.googlesource.com/7050
Reviewed-by: Adam Langley <agl@google.com>
This slightly simplifies the SSL_ECDH code and will be useful later on
in reimplementing the key parsing logic.
Change-Id: Ie41ea5fd3a9a734b3879b715fbf57bd991e23799
Reviewed-on: https://boringssl-review.googlesource.com/6858
Reviewed-by: Adam Langley <agl@google.com>
Take the mappings for MD5 and SHA-224 values out of the code altogether. This
aligns with the current TLS 1.3 draft.
For MD5, this is a no-op. It is not currently possible to configure accepted
signature algorithms, MD5 wasn't in the hardcoded list, and we already had a
test ensuring we enforced our preferences correctly. MD5 also wasn't in the
default list of hashes our keys could sign and no one overrides it with a
different hash.
For SHA-224, this is not quite a no-op. The hardcoded accepted signature
algorithms list included SHA-224, so this will break servers relying on that.
However, Chrome's metrics have zero data points of servers picking SHA-224 and
no other major browser includes it. Thus that should be safe.
SHA-224 was also in the default list of hashes we are willing to sign. For
client certificates, Chromium's abstractions already did not allow signing
SHA-224, so this is a no-op there. For servers, this will break any clients
which only accept SHA-224. But no major browsers do this and I am not aware of
any client implementation which does such ridiculous thing.
(SHA-1's still in there. Getting rid of that one is going to take more effort.)
Change-Id: I6a765fdeea9e19348e409d58a0eac770b318e599
Reviewed-on: https://boringssl-review.googlesource.com/7020
Reviewed-by: Adam Langley <agl@google.com>
Finally, we can stick ScopedFOO in containers.
Change-Id: I3ed166575822af9f182e8be8f4db723e1f08ea31
Reviewed-on: https://boringssl-review.googlesource.com/6553
Reviewed-by: Adam Langley <alangley@gmail.com>
OpenSSL 1.1.0 doesn't seem to have these two, so this isn't based on anything.
Have them return uint64_t in preparation for switching the internal
representation to uint64_t so ssl_record_sequence_update can go away.
Change-Id: I21d55e9a29861c992f409ed293e0930a7aaef7a3
Reviewed-on: https://boringssl-review.googlesource.com/6941
Reviewed-by: Adam Langley <alangley@gmail.com>
We have the hook on the SSL_CTX, but it should be possible to set it without
reaching into SSL_CTX.
Change-Id: I93db070c7c944be374543442a8de3ce655a28928
Reviewed-on: https://boringssl-review.googlesource.com/6880
Reviewed-by: Adam Langley <alangley@gmail.com>
They should use the same P-256 check.
Change-Id: I66dd63663e638cba35b8f70f9cf119c718af4aec
Reviewed-on: https://boringssl-review.googlesource.com/6845
Reviewed-by: Adam Langley <alangley@gmail.com>
Move it into ssl->s3 so it automatically behaves correctly on SSL_clear.
ssl->version is still a mess though.
Change-Id: I17a692a04a845886ec4f8de229fa6cf99fa7e24a
Reviewed-on: https://boringssl-review.googlesource.com/6844
Reviewed-by: Adam Langley <alangley@gmail.com>
For TLS, this machinery only exists to swallow no_certificate alerts
which only get sent in an SSL 3.0 codepath anyway. It's much less a
no-op for SSL 3.0 which, strictly speaking, has only a subset of TLS's
alerts.
This gets messy around version negotiation because of the complex
relationship between enc_method, have_version, and version which all get
set at different times. Given that SSL 3.0 is nearly dead and all these
alerts are fatal to the connection anyway, this doesn't seem worth
carrying around. (It doesn't work very well anyway. An SSLv3-only server
may still send a record_overflow alert before version negotiation.)
This removes the last place enc_method is accessed prior to version
negotiation.
Change-Id: I79a704259fca69e4df76bd5a6846c9373f46f5a9
Reviewed-on: https://boringssl-review.googlesource.com/6843
Reviewed-by: Adam Langley <alangley@gmail.com>
This removes the various non-PRF checks from SSL3_ENC_METHOD so that can
have a clearer purpose. It also makes TLS 1.0 through 1.2's
SSL3_ENC_METHOD tables identical and gives us an assert to ensure
nothing accesses the version bits before version negotiation.
Accordingly, ssl_needs_record_splitting was reordered slightly so we
don't rely on enc_method being initialized to TLS 1.2
pre-version-negotiation.
This leaves alert_value as the only part of SSL3_ENC_METHOD which may be
accessed before version negotiation.
Change-Id: If9e299e2ef5511b5fa442b2af654eed054c3e675
Reviewed-on: https://boringssl-review.googlesource.com/6842
Reviewed-by: Adam Langley <alangley@gmail.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
