RFC 5746 forbids a server from downgrading or upgrading
renegotiation_info support. Even with SSL_OP_LEGACY_SERVER_CONNECT set
(the default), we can still enforce a few things.
I do not believe this has practical consequences. The attack variant
where the server half is prefixed does not involve a renegotiation on
the client. The converse where the client sees the renegotiation and
prefix does, but we only support renego for the mid-stream HTTP/1.1
client auth hack, which doesn't do this. (And with triple-handshake,
HTTPS clients should be requiring the certificate be unchanged across
renego which makes this moot.)
Ultimately, an application which makes the mistake of using
renegotiation needs to be aware of what exactly that means and how to
handle connection state changing mid-stream. We make renego opt-in now,
so this is a tenable requirement.
(Also the legacy -> secure direction would have been caught by the
server anyway since we send a non-empty RI extension.)
Change-Id: I915965c342f8a9cf3a4b6b32f0a87a00c3df3559
Reviewed-on: https://boringssl-review.googlesource.com/6559
Reviewed-by: Adam Langley <agl@google.com>
Right now your options are:
- Bounce on a reference and deal with cleanup needlessly.
- Manually check the type tag and peek into the union.
We probably have no hope of opaquifying this struct, but for new code, let's
recommend using this function rather than the more error-prone thing.
Change-Id: I9b39ff95fe4264a3f7d1e0d2894db337aa968f6c
Reviewed-on: https://boringssl-review.googlesource.com/6551
Reviewed-by: Adam Langley <agl@google.com>
The current check has two problems:
- It only runs on the server, where there isn't a curve list at all. This was a
mistake in https://boringssl-review.googlesource.com/1843 which flipped it
from client-only to server-only.
- It only runs in TLS 1.2, so one could bypass it by just negotiating TLS 1.1.
Upstream added it as part of their Suite B mode, which requires 1.2.
Move it elsewhere. Though we do not check the entire chain, leaving that to the
certificate verifier, signatures made by the leaf certificate are made by the
SSL/TLS stack, so it's reasonable to check the curve as part of checking
suitability of a leaf.
Change-Id: I7c12f2a32ba946a20e9ba6c70eff23bebcb60bb2
Reviewed-on: https://boringssl-review.googlesource.com/6414
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
This is completely a no-op as currently tls12_get_psigalgs always returns a
hardcoded list which always includes SHA-1. But if this were to be made
configurable in the future, we should reject SHA-1 when configured to do so.
Change-Id: I7ab188eeff850d1e5f70b9522304812bab2d941a
Reviewed-on: https://boringssl-review.googlesource.com/6411
Reviewed-by: Adam Langley <agl@google.com>
Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
Right whether NPN is advertised can only be configured globally on the SSL_CTX.
Rather than adding two pointers to each SSL*, add an options bit to disable it
so we may plumb in a field trial to disable NPN.
Chromium wants to be able to route a bit in to disable NPN, but it uses SSL_CTX
incorrectly and has a global one, so it can't disconnect the callback. (That
really needs to get fixed. Although it's not clear this necessarily wants to be
lifted up to SSL_CTX as far as Chromium's SSLClientSocket is concerned since
NPN doesn't interact with the session cache.)
BUG=526713
Change-Id: I49c86828b963eb341c6ea6a442557b7dfa190ed3
Reviewed-on: https://boringssl-review.googlesource.com/6351
Reviewed-by: Adam Langley <alangley@gmail.com>
Also added a SSL_CTX_set_select_certificate_cb setter for
select_certificate_cb so code needn't access SSL_CTX directly. Plus it
serves as a convenient anchor for the documentation.
Change-Id: I23755b910e1d77d4bea7bb9103961181dd3c5efe
Reviewed-on: https://boringssl-review.googlesource.com/6291
Reviewed-by: Adam Langley <alangley@gmail.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL 3.0 used to have a nice and simple rule around extensions. They don't
exist. And then RFC 5746 came along and made this all extremely confusing.
In an SSL 3.0 server, rather than blocking ServerHello extension
emission when renegotiation_info is missing, ignore all ClientHello
extensions but renegotiation_info. This avoids a mismatch between local
state and the extensions with emit.
Notably if, for some reason, a ClientHello includes the session_ticket
extension, does NOT include renegotiation_info or the SCSV, and yet the
client or server are decrepit enough to negotiate SSL 3.0, the
connection will fail due to unexpected NewSessionTicket message.
See https://crbug.com/425979#c9 for a discussion of something similar
that came up in diagnosing https://poodle.io/'s buggy POODLE check.
This is analogous to upstream's
5a3d8eebb7667b32af0ccc3f12f314df6809d32d.
(Not supporting renego as a server in any form anyway, we may as well
completely ignore extensions, but then our extensions callbacks can't
assume the parse hooks are always called. This way the various NULL
handlers still function.)
Change-Id: Ie689a0e9ffb0369ef7a20ab4231005e87f32d5f8
Reviewed-on: https://boringssl-review.googlesource.com/6180
Reviewed-by: Adam Langley <agl@google.com>
The Android system BoringSSL has a couple of changes:
∙ ChaCha20-Poly1305 is disabled because it's not an offical
cipher suite.
∙ P-521 is offered in the ClientHello.
These changes were carried in the Android BoringSSL repo directly. This
change upstreams them when BORINGSSL_ANDROID_SYSTEM is defined.
Change-Id: If3e787c6694655b56e7701118aca661e97a5f26c
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
SCT and OCSP are part of the session data and as such shouldn't be sent
again to the client when resuming.
Change-Id: Iaee3a3c4c167ea34b91504929e38aadee37da572
Reviewed-on: https://boringssl-review.googlesource.com/5900
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
ssl.h should be first. Also two lines after includes and the rest of the
file.
Change-Id: Icb7586e00a3e64170082c96cf3f8bfbb2b7e1611
Reviewed-on: https://boringssl-review.googlesource.com/5892
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
Rather than iterate over handshake_dgsts itself, it can just call
tls1_handshake_digest.
Change-Id: Ia518da540e47e65b13367eb1af184c0885908488
Reviewed-on: https://boringssl-review.googlesource.com/5617
Reviewed-by: Adam Langley <agl@google.com>
The handshake hash is initialized from the buffer as soon as the cipher
is known. When adding a message to the transcript, independently update
the buffer and rolling hash, whichever is active. This avoids the
complications around dont_free_handshake_buffer and EMS.
BUG=492371
Change-Id: I3b1065796a50fd1be5d42ead7210c2f253ef0aca
Reviewed-on: https://boringssl-review.googlesource.com/5615
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
With the fastradio stuff gone, the padding computation is slightly more
straight-forward.
Change-Id: I67ede92fdf5f34c265c7a44e4cdc1a5ce5416df2
Reviewed-on: https://boringssl-review.googlesource.com/5482
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I5777b73f485da6534b407e6c531f8293898b9c06
Reviewed-on: https://boringssl-review.googlesource.com/5461
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3b085cd13295e83c578c549763f0de82f39499a2
Reviewed-on: https://boringssl-review.googlesource.com/5460
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Chromium's NaCl build has _POSIX_SOURCE already defined, so #undef it first.
The compiler used also dislikes static asserts with the same name.
Change-Id: I0283fbad1a2ccf98cdb0ca2a7965b15441806308
Reviewed-on: https://boringssl-review.googlesource.com/5430
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
These are new as of 1.0.2, not terribly useful of APIs, and are the only
reason we have to retain so many NIDs in the TLS_SIGALGS structure.
Change-Id: I7237becca09acc2ec2be441ca17364f062253893
Reviewed-on: https://boringssl-review.googlesource.com/5347
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
It's still the case that we have many old compilers that can't cope with
anything else ☹.
Change-Id: Ie5a1987cd5164bdbde0c17effaa62aecb7d12352
Reviewed-on: https://boringssl-review.googlesource.com/5320
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
ssl_cipher_list_to_bytes is client-only, so s->renegotiate worked, but
the only reason the other two worked is because s->renegotiate isn't a
lie on the server before ServerHello.
BUG=429450
Change-Id: If68a986c6ec4a0f16e57a6187238e05b50ecedfc
Reviewed-on: https://boringssl-review.googlesource.com/4822
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
There's multiple different versions of this check, between
s->s3->have_version (only works at some points), s->new_session (really
weird and not actually right), s->renegotiate (fails on the server
because it's always 2 after ClientHello), and s->s3->tmp.finish_md_len
(super confusing). Add an explicit bit with clear meaning. We'll prune
some of the others later; notably s->renegotiate can go away when
initiating renegotiation is removed.
This also tidies up the extensions to be consistent about whether
they're allowed during renego:
- ALPN failed to condition when accepting from the server, so even
if the client didn't advertise, the server could.
- SCTs now *are* allowed during renego. I think forbidding it was a
stray copy-paste. It wasn't consistently enforced in both ClientHello
and ServerHello, so the server could still supply it. Moreover, SCTs
are part of the certificate, so we should accept it wherever we accept
certificates, otherwise that session's state becomes incomplete. This
matches OCSP stapling. (NB: Chrome will never insert a session created
on renego into the session cache and won't accept a certificate
change, so this is moot anyway.)
Change-Id: Ic9bd1ebe2a2dbe75930ed0213bf3c8ed8170e251
Reviewed-on: https://boringssl-review.googlesource.com/4730
Reviewed-by: Adam Langley <agl@google.com>
When tlsext_ticket_key_cb is used, the full bounds aren't known until
after the callback has returned.
Change-Id: I9e89ffae6944c74c4ca04e6aa28afd3ec80aa1d4
Reviewed-on: https://boringssl-review.googlesource.com/4552
Reviewed-by: Adam Langley <agl@google.com>
It's unused, but for some old #ifdef branch in wpa_supplicant's EAP-FAST
hack, before SSL_set_session_ticket_ext_cb existed.
Change-Id: Ifc11fea2f6434354f756e04e5fc3ed5f1692025e
Reviewed-on: https://boringssl-review.googlesource.com/4550
Reviewed-by: Adam Langley <agl@google.com>
This is a really dumb API wart. Now that we have a limited set of curves that
are all reasonable, the automatic logic should just always kick in. This makes
set_ecdh_auto a no-op and, instead of making it the first choice, uses it as
the fallback behavior should none of the older curve selection APIs be used.
Currently, by default, server sockets can only use the plain RSA key exchange.
BUG=481139
Change-Id: Iaabc82de766cd00968844a71aaac29bd59841cd4
Reviewed-on: https://boringssl-review.googlesource.com/4531
Reviewed-by: Adam Langley <agl@google.com>
See upstream's bd891f098bdfcaa285c073ce556d0f5e27ec3a10. It honestly seems
kinda dumb for a client to do this, but apparently the spec allows this.
Judging by code inspection, OpenSSL 1.0.1 also allowed this, so this avoids a
behavior change when switching from 1.0.1 to BoringSSL.
Add a test for this, which revealed that, unlike upstream's version, this
actually works with ecdh_auto since tls1_get_shared_curve also needs updating.
(To be mentioned in newsletter.)
Change-Id: Ie622700f17835965457034393b90f346740cfca8
Reviewed-on: https://boringssl-review.googlesource.com/4464
Reviewed-by: Adam Langley <agl@google.com>
These are all masks of some sort (except id which is a combined version and
cipher), so they should use fixed-size unsigned integers.
Change-Id: I058dd8ad231ee747df4b4fb17d9c1e2cbee21918
Reviewed-on: https://boringssl-review.googlesource.com/4283
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
There's multiple sets of APIs for selecting the curve. Fold away
SSL_OP_SINGLE_ECDH_USE as failing to set it is either a no-op or a bug. With
that gone, the consumer only needs to control the selection of a curve, with
key generation from then on being uniform. Also clean up the interaction
between the three API modes in s3_srvr.c; they were already mutually exclusive
due to tls1_check_ec_tmp_key.
This also removes all callers of EC_KEY_dup (and thus CRYPTO_dup_ex_data)
within the library.
Change-Id: I477b13bd9e77eb03d944ef631dd521639968dc8c
Reviewed-on: https://boringssl-review.googlesource.com/4200
Reviewed-by: Adam Langley <agl@google.com>
Quite a few functions reported wrong function names when pushing
to the error stack.
Change-Id: I84d89dbefd2ecdc89ffb09799e673bae17be0e0f
Reviewed-on: https://boringssl-review.googlesource.com/4080
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Align with upstream's renames from a while ago. These names are considerably
more standard. This also aligns with upstream in that both "ECDHE" and "EECDH"
are now accepted in the various cipher string parsing bits.
Change-Id: I84c3daeacf806f79f12bc661c314941828656b04
Reviewed-on: https://boringssl-review.googlesource.com/4053
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 34e3edbf3a10953cb407288101fd56a629af22f9. This fixes
CVE-2015-0291. Also bubble up malloc failures in tls1_set_shared_sigalgs. Tidy
up style a bit and remove unnecessary check (it actually is unnecessary; see
https://boringssl-review.googlesource.com/4042).
Change-Id: Idfb31a90fb3e56ef6fe7701464748a5c1603f064
Reviewed-on: https://boringssl-review.googlesource.com/4047
Reviewed-by: Adam Langley <agl@google.com>
Some things were misindented in the reformatting.
Change-Id: I97642000452ce4d5b4c8a39b794cec13097d8760
Reviewed-on: https://boringssl-review.googlesource.com/3870
Reviewed-by: Adam Langley <agl@google.com>
None of these are version-specific. SSL_PROTOCOL_METHOD's interface will change
later, but this gets us closer to folding away SSL3_ENC_METHOD.
Change-Id: Ib427cdff32d0701a18fe42a52cdbf798f82ba956
Reviewed-on: https://boringssl-review.googlesource.com/3769
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
They're not in the duplicated handshake state machines anyway. But we still
shouldn't negotiate them. d1_pkt.c assumes Finished is the only post-CCS
handshake message. An unexpected handshake message in the current epoch may
either be a retransmit/out-of-order message from the previous handshake, or a
message from the next handshake (also potentially out-of-order). In the former
case, we shouldn't spin up another handshake state machine instance.
(This assumption is required due to a protocol bug. DTLS resets sequence
numbers after a handshake, so it is necessary to categorize handshake fragments
by pre-CCS and post-CCS to distinguish between retransmit and renego.)
Change-Id: Ib3c1c7085c729e36a40f7ff14494733156924a24
Reviewed-on: https://boringssl-review.googlesource.com/3028
Reviewed-by: Adam Langley <agl@google.com>
The under 32 constraint is silly; it's to check for duplicate curves in
library-supplied configuration. That API is new as of 1.0.2. It doesn't seem
worth bothering; if the caller supplies a repeated value, may as well emit a
repeated one and so be it. (Probably no one will ever call that function
outside of maybe test code anyway.)
While I'm here, remove the 0 constraint too. It's not likely to change, but
removing the return value overload seems easier than keeping comments about it
comments about it.
Change-Id: I01d36dba1855873875bb5a0ec84b040199e0e9bc
Reviewed-on: https://boringssl-review.googlesource.com/2844
Reviewed-by: Adam Langley <agl@google.com>
We only implement four curves (P-224, P-256, P-384, and P-521) and only
advertise the latter three by default. Don't maintain entries corresponding to
all the unimplemented curves.
Change-Id: I1816a10c6f849ca1d9d896bc6f4b64cd6b329481
Reviewed-on: https://boringssl-review.googlesource.com/2843
Reviewed-by: Adam Langley <agl@google.com>
They both happen to be zero, but OBJ_undef is a type error; OBJ_foo expands to
a comma-separated list of integers.
Change-Id: Ia5907dd3bc83240b7cc98af6456115d2efb48687
Reviewed-on: https://boringssl-review.googlesource.com/2842
Reviewed-by: Adam Langley <agl@google.com>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
(Imported from upstream's 4f605ccb779e32a770093d687e0554e0bbb137d3)
More state that should be systematically reset across handshakes. Add a reset
on the ServerHello end too since that was missed.
Change-Id: Ibb4549acddfd87caf7b6ff853e2adbfa4b7e7856
Reviewed-on: https://boringssl-review.googlesource.com/2838
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
This avoids needing a should_add_to_finished_hash boolean on do_write. The
logic in do_write was a little awkward because do_write would be called
multiple times if the write took several iterations. This also gets complex if
DTLS retransmits are involved. (At a glance, it's not obvious the
BIO_CTRL_DGRAM_MTU_EXCEEDED case actually works.)
Doing it as the handshake message is being prepared avoids this concern. It
also gives a natural point for the extended master secret logic which needs to
do work after the finished hash has been sampled.
As a bonus, we can remove s->d1->retransmitting which was only used to deal
with this issue.
Change-Id: Ifedf23ee4a6c5e08f960d296a6eb1f337a16dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2604
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
There's no need to make that conditional.
Change-Id: Idac1aba42b22e3fe8e7731ae4ecb5ebc4183336c
Reviewed-on: https://boringssl-review.googlesource.com/2550
Reviewed-by: Adam Langley <agl@google.com>
Some code predated the RFCs themselves, but the RFCs now exist. Also remove
now obsolete comments and some unused #defines.
See upstream's cffeacd91e70712c99c431bf32a655fa1b561482. (Though this predates
it; I just remembered I never uploaded it.)
Change-Id: I5e56f0ab6b7f558820f72e84dfdbc71a8c23cb91
Reviewed-on: https://boringssl-review.googlesource.com/2475
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
The ex_data index may fail to be allocated. Also don't leave a dangling pointer
in handshake_dgst if EVP_DigestInit_ex fails and check a few more init function
failures.
Change-Id: I2e99a89b2171c9d73ccc925a2f35651af34ac5fb
Reviewed-on: https://boringssl-review.googlesource.com/2342
Reviewed-by: Adam Langley <agl@google.com>
tls1_process_sigalgs now only determines the intersection between the peer
algorithms and those configured locally. That list is queried later to
determine the hash algorithm to use when signing CertificateVerify or
ServerKeyExchange.
This is needed to support client auth on Windows where smartcards or CAPI may
not support all hash functions.
As a bonus, this does away with more connection-global state. This avoids the
current situation where digests are chosen before keys are known (for
CertificateVerify) or for slots that don't exist.
Change-Id: Iec3619a103d691291d8ebe08ef77d574f2faf0e8
Reviewed-on: https://boringssl-review.googlesource.com/2280
Reviewed-by: Adam Langley <agl@google.com>
CERT_PKEY_SIGN isn't meaningful since, without strict mode, we always fall back
to SHA-1 anyway. So the digest is never NULL when CERT_PKEY_SIGN is computed.
The entire valid_flags is now back to it's pre-1.0.2 check of seeing if the
certificate and key are configured.
This finally removes the sensitivity between valid_flags and selecting the
digest, so we can defer choosing the digest all we like.
Change-Id: I9f9952498f512d7f0cc799497f7c5b52145a48af
Reviewed-on: https://boringssl-review.googlesource.com/2288
Reviewed-by: Adam Langley <agl@google.com>
It doesn't depend on the cipher now that export ciphers are gone. It need only
be called once. Also remove the valid bit; nothing ever reads it. Its output is
also only used within a function, so make mask_k and mask_a local variables.
So all the configuration-based checks are in one place, change the input
parameter from CERT to SSL and move the PSK and ECDHE checks to the mask
computation. This avoids having to evaluate the temporary EC key for each
cipher.
The remaining uses are on the client which uses them differently (disabled
features rather than enabled ones). Those too may as well be local variables,
so leave a TODO.
Change-Id: Ibcb574341795d4016ea749f0290a793eed798874
Reviewed-on: https://boringssl-review.googlesource.com/2287
Reviewed-by: Adam Langley <agl@google.com>
Many are now unused. Only two are currently considered in cipher selection:
CERT_PKEY_VALID and CERT_PKEY_SIGN. (As per previous commits, this is either
bizarre due to limited slots or redundant with ssl_early_callback_ctx. We can
probably prune this too.)
This also fixes a bug where DTLS 1.0 went through a TLS 1.2 codepath. As the
DTLS code is currently arranged, all version comparisons must be done via
macros like SSL_USE_SIGALGS. (Probably we should add functions to map from DTLS
to TLS versions and slowly move the library to using the TLS version as
in-memory representation.)
Change-Id: I89bcf5b7b9ea5cdecf54f4445156586377328fe0
Reviewed-on: https://boringssl-review.googlesource.com/2286
Reviewed-by: Adam Langley <agl@google.com>
It's new in OpenSSL 1.0.2 so it's never set by existing code. This removes gobs
and gobs of complexity from tls1_check_chain. It only checks the local
certificate, not the peer certificate. The uses appear to be:
- Sanity-check configuration. Not worth the complexity.
- Guide in selecting ciphers based on ClientHello parameters and which
certificates in the CERT_PKEY are compatible. This isn't very useful one its
own since the CERT_PKEY array only stores one slot per type (e.g. you cannot
configure RSA/SHA-1 and RSA/SHA-256).
- For the (currently removed) SSL_check_chain to return more information based
on ClientHello parameters and guide selecting a certificate. This is
potentially useful but, as noted in the commit which removed it, redundant
with ssl_early_callback_ctx.
This CL is largely mechanical removing of dead codepaths. The follow-up will
clean up the now unnecessary parts of this function.
Change-Id: I2ebfa17e4f73e59aa1ee9e4ae7f615af2c6cf590
Reviewed-on: https://boringssl-review.googlesource.com/2285
Reviewed-by: Adam Langley <agl@google.com>
Get rid of now dead codepaths.
Change-Id: I3b5d49097cba70c5698a230cc6c1d79bdd0f0880
Reviewed-on: https://boringssl-review.googlesource.com/2284
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
This resolves a pile of MSVC warnings in Chromium.
Change-Id: Ib9a29cb88d8ed8ec4118d153260f775be059a803
Reviewed-on: https://boringssl-review.googlesource.com/1865
Reviewed-by: Adam Langley <agl@google.com>
We patch bugs into the runner implementation for testing, not our own.
Change-Id: I0a8ac73eaeb70db131c01a0fd9c84f258589a884
Reviewed-on: https://boringssl-review.googlesource.com/1845
Reviewed-by: Adam Langley <agl@google.com>
Use the newly split out tls1_check_point_format. Also don't condition it on
s->tlsext_ecpointformatlist which is unrelated and made this code never run.
Change-Id: I9d77654c8eaebde07079d989cd60fbcf06025d75
Reviewed-on: https://boringssl-review.googlesource.com/1844
Reviewed-by: Adam Langley <agl@google.com>
This avoids the strange optional parameter thing by moving it to the client.
Also document what the functions should do.
Change-Id: I361266acadedfd2bfc4731f0900821fc2c2f954d
Reviewed-on: https://boringssl-review.googlesource.com/1843
Reviewed-by: Adam Langley <agl@google.com>
Switch all of SRTP code to the standard return value convention with two
exceptions. Unfortunately, OpenSSL exposed API with the wrong error code. Keep
the public API flipped and document.
Change-Id: I43ac82513f4f52bb36a0b54aba9b9e0fa285730e
Reviewed-on: https://boringssl-review.googlesource.com/1691
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for noting that |host_name| could be used while
uninitialised in the resumption case.
While in the area, this change also renames |servername_done| to
something more reasonable and removes a documented value that was never
used. Additionally, the SNI ack was only sent when not resuming so
calculating whether it should be sent when processing ClientHello
extensions (which is after s->hit has been set) is superfluous.
Lastly, since SNI is only acked by servers, there's no need to worry
about the SNI callback returning NOACK in the client case.
Change-Id: Ie4ecfc347bd7afaf93b12526ff9311cc45da4df6
Reviewed-on: https://boringssl-review.googlesource.com/1700
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
Remove all the logic managing key types that aren't being used anymore.
Change-Id: I101369164588048e64ba1c84a6b8aac8f3a221cd
Reviewed-on: https://boringssl-review.googlesource.com/1567
Reviewed-by: Adam Langley <agl@google.com>
DSA is not connected up to EVP, so it wouldn't work anyway. We shouldn't
advertise a cipher suite we don't support. Chrome UMA data says virtually no
handshakes end up negotiating one of these.
Change-Id: I874d934432da6318f05782ebd149432c1d1e5275
Reviewed-on: https://boringssl-review.googlesource.com/1566
Reviewed-by: Adam Langley <agl@google.com>
These are the variants where the CA signs a Diffie-Hellman keypair. They are
not supported by Chrome on NSS.
Change-Id: I569a7ac58454bd3ed1cd5292d1f98499012cdf01
Reviewed-on: https://boringssl-review.googlesource.com/1564
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
The protocols are pretty similar; they were all basically redundant. The free
of s->tlsext_session_ticket (more fallout from the EAP-FAST patch) was moved to
SSL_free because that object's attached to s, not s->s3. This is relevant if
SSL_set_ssl_method gets called.
Change-Id: I14a896ba8a6a2c34ab1cb5f65311b117051228da
Reviewed-on: https://boringssl-review.googlesource.com/1509
Reviewed-by: Adam Langley <agl@google.com>
They weren't updated to account for DTLS 1.2.
Change-Id: I81b3bfcb84a46d7b233bb567976a7de37bc46b92
Reviewed-on: https://boringssl-review.googlesource.com/1503
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
CVE-2014-3509
(Imported from upstream's 92aa73bcbfad44f9dd7997ae51537ac5d7dc201e)
Change-Id: Ibc681897251081ae5ebfea0ff6ca9defd73fe0f5
Reviewed-on: https://boringssl-review.googlesource.com/1441
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The length is the number of elements now, not the size in bytes. Caught by
ASan.
Change-Id: I4c5ccee61711e8d2e272b9bacd292dbff04b5133
Reviewed-on: https://boringssl-review.googlesource.com/1336
Reviewed-by: Adam Langley <agl@google.com>
Slightly cleaner; it means we can use CBS_stow.
Change-Id: I074aa2d73a79648013dea025ee531beeea2af4a2
Reviewed-on: https://boringssl-review.googlesource.com/1287
Reviewed-by: Adam Langley <agl@google.com>
Don't retain curve IDs in serialized form; serialization only happens when
writing and reading from the wire. The internal representation is a uint16_t
which matches the range of the value and avoids all the checks for the first
byte being 0.
This also fixes a bug in tls1_check_ec_tmp_key's suite B logic; the || should
have been &&, though now it's gone.
This doesn't relieve some of the other assumptions about curve IDs:
tls1_set_curves still assumes that all curve IDs are under 32, and
tls1_ec_curve_id2nid still assumes 0 is not a valid curve ID. Add a
compile-time assert and a comment to document this. We're up to 28 now, so this
may well need to be revised sooner or later.
Remove SSL_get_shared_curve as it's new and unused API, using it in a loop is
O(N^3), and lets us simplify a function.
Change-Id: I82778cb82648d82f7b5de8c5341e0e1febdf5611
Reviewed-on: https://boringssl-review.googlesource.com/1256
Reviewed-by: Adam Langley <agl@google.com>
Per spec, the server sends it iff it sends the extension in ServerHello. There
is no need to probe for whether Finished is or isn't sent. NSS is strict about
this (wait_new_session_ticket never transitions to wait_change_cipher without a
NewSessionTicket message), so this is safe.
Reset tlsext_ticket_expected in ssl_scan_serverhello_tlsext to ensure state
from the initial handshake doesn't confuse renegotiation. This is another one
of those per-handshake states that should be systematically reset on each
handshake. For now, reset it properly at least.
Change-Id: I7d16439ce632b9abf42f62d5d8e1303cb6f0be1f
Reviewed-on: https://boringssl-review.googlesource.com/1296
Reviewed-by: Adam Langley <agl@google.com>
This one in code that's not compiled though.
Change-Id: I8fb6c2df4669a70223889d31b233b577cf3e6b22
Reviewed-on: https://boringssl-review.googlesource.com/1211
Reviewed-by: Adam Langley <agl@google.com>
This avoids having to do the CBS_skip dance and is better about returning the
right alert.
Change-Id: Id84eba307d7c67269ccbc07a38d9044b6f4f7c6c
Reviewed-on: https://boringssl-review.googlesource.com/1169
Reviewed-by: Adam Langley <agl@google.com>
Also tidy up some variable names and update RSA_verify call for it no longer
returning -1. Add CBS helper functions for dealing with C strings.
Change-Id: Ibc398d27714744f5d99d4f94ae38210cbc89471a
Reviewed-on: https://boringssl-review.googlesource.com/1164
Reviewed-by: Adam Langley <agl@google.com>
This is the first of reorganizing state between connection state and handshake
state. The existing set are retained in cert_st for the server; they are server
configuration. The client gets a copy in s->s3->tmp alongside other handshake
state.
With other handshake state moved there, hopefully we can reset that state in
one go and possibly not even maintain it when there is no handshake in
progress. Rather than currently where we sometimes confused connection state
and handshake state and have to reset as appropriate on renegotiate.
While I'm here, document the fields and name them something more useful than
'ctypes'.
Change-Id: Ib927579f0004fc5c6854fce2127625df669b2b6d
Reviewed-on: https://boringssl-review.googlesource.com/1113
Reviewed-by: Adam Langley <agl@google.com>
Resolve one of the TODOs since it's quick. Adjust the
-expect-server-name test to assert it both in the normal codepath and
in the early callback, to provide test coverage for
SSL_early_callback_ctx_extension_get.
Change-Id: I4d71158b9fd2f4fbb54d3e51184bd25d117bdc91
Reviewed-on: https://boringssl-review.googlesource.com/1120
Reviewed-by: Adam Langley <agl@google.com>
ClientHello and ServerHello are not allowed to include duplicate extensions.
Add a new helper function to check this and call as appropriate. Remove ad-hoc
per-extension duplicate checks which are no unnecessary.
Add runner.go tests to verify such message correctly rejected.
Change-Id: I7babd5b642dfec941459512869e2dd6de26a831c
Reviewed-on: https://boringssl-review.googlesource.com/1100
Reviewed-by: Adam Langley <agl@google.com>
The function names are wrong.
Change-Id: Icbaeb541a2dcc504f69af81a7505e5cfbeed91f0
Reviewed-on: https://boringssl-review.googlesource.com/1101
Reviewed-by: Adam Langley <agl@google.com>
We handle it externally now.
Change-Id: Ib561f64078809645195fd1a859b3256499038847
Reviewed-on: https://boringssl-review.googlesource.com/1098
Reviewed-by: Adam Langley <agl@google.com>
Done with unifdef with some manual edits to remove empty lines.
Change-Id: I40d163539cab8ef0e01e45b7dc6a1a0a37733c3e
Reviewed-on: https://boringssl-review.googlesource.com/1097
Reviewed-by: Adam Langley <agl@google.com>
Along the way, clean up the certificate types code to not have the
hard-coded fixed-size array.
Change-Id: If3e5978f7c5099478a3dfa37a0a7059072f5454a
Reviewed-on: https://boringssl-review.googlesource.com/1103
Reviewed-by: Adam Langley <agl@google.com>
Building without RSA support is unreasonable. Changes were made by
running
find . -type f -name *.c | xargs unifdef -m -U OPENSSL_NO_RSA
find . -type f -name *.h | xargs unifdef -m -U OPENSSL_NO_RSA
using unifdef 2.10 and some newlines were removed manually.
Change-Id: Iea559e2d4b3d1053f28a4a9cc2f7a3d1f6cabd61
Reviewed-on: https://boringssl-review.googlesource.com/1095
Reviewed-by: Adam Langley <agl@google.com>
Found no users of the functions which control the feature. (Also I don't
particularly want to port all of that to CBS...)
Change-Id: I55da42c44d57252bd47bdcb30431be5e6e90dc56
Reviewed-on: https://boringssl-review.googlesource.com/1061
Reviewed-by: Adam Langley <agl@google.com>
This code doesn't even get built unless you go out of your way to pass an
extension value at build time.
Change-Id: I92ffcdfb18505c96e5ef390c8954a54cee19967f
Reviewed-on: https://boringssl-review.googlesource.com/1063
Reviewed-by: Adam Langley <agl@google.com>
If we need an extension, we can implement it in-library.
Change-Id: I0eac5affcd8e7252b998b6c86ed2068234134b08
Reviewed-on: https://boringssl-review.googlesource.com/1051
Reviewed-by: Adam Langley <agl@google.com>
This gives us systematic bounds-checking on all the parses. Also adds a
convenience function, CBS_memdup, for saving the current contents of a CBS.
Change-Id: I17dad74575f03121aee3f771037b8806ff99d0c3
Reviewed-on: https://boringssl-review.googlesource.com/1031
Reviewed-by: Adam Langley <agl@google.com>
A missing bounds check in the handling of the TLS heartbeat extension
can be used to reveal up to 64k of memory to a connected client or
server.
Thanks for Neel Mehta of Google Security for discovering this bug and to
Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
preparing the fix (CVE-2014-0160)
(Imported from upstream's 7e840163c06c7692b796a93e3fa85a93136adbb2)
Move ECC SSL extensions to the end.
WebSphere Application Server 7.0 appears to be intolerant of an empty
extension at the end. To that end, also ensure we never send an empty
padding extension.
Fix limit checks in ssl_add_clienthello_tlsext and
ssl_add_serverhello_tlsext.
Some of the limit checks reference p rather than ret. p is the original
buffer position, not the current one. Fix those and rename p to orig so
it's clearer.
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
