Make building against software that expects OpenSSL easier.
Change-Id: I1af090ae8208218d6e226ee0baf51053699d85cc
Reviewed-on: https://boringssl-review.googlesource.com/8141
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Windows is, not unreasonably, complaining that taking abs() of an unsigned is
ridiculous. But these values actually are signed and fit very easily in an int
anyway.
Change-Id: I34fecaaa3616732112e3eea105a7c84bd9cd0bae
Reviewed-on: https://boringssl-review.googlesource.com/8144
Reviewed-by: Adam Langley <agl@google.com>
doc.go is still a little unhappy.
Change-Id: I5a8f3da91dabb45d29d0e08f13b7dabdcd521c38
Reviewed-on: https://boringssl-review.googlesource.com/8145
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise builds fail with:
crypto/newhope/newhope_statistical_test.cc:136:27: error: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
Change-Id: I85d5816c1d7ee71eef362bffe983b2781ce310a4
One of these tests the distribution of noise polynomials; the other
tests that that agreed-upon keys (prior to whitening) have roughly equal
numbers of 0s and 1s.
Along the way, expose a few more API bits.
Change-Id: I6b04708d41590de45d82ea95bae1033cfccd5d67
Reviewed-on: https://boringssl-review.googlesource.com/8130
Reviewed-by: Adam Langley <agl@google.com>
In TLS 1.3, the actual record type is hidden within the encrypted data
and the record layer defaults to using a TLS 1.0 {3, 1} record version
for compatibility. Additionally the record layer no longer checks the
minor version of the record layer to maintain compatibility with the
TLS 1.3 spec.
Change-Id: If2c08e48baab170c1658e0715c33929d36c9be3a
Reviewed-on: https://boringssl-review.googlesource.com/8091
Reviewed-by: David Benjamin <davidben@google.com>
They match the new style not the old EAY style now. They're also not
likely to be reformatted. It's just the legacy ASN.1 stuff now and we're
intentionally not doing much with those. (The old text was written back
before the SSL stack had been reformatted.)
Change-Id: I4852761b013e8c2688ebc7eaf4970afbdc69e858
Reviewed-on: https://boringssl-review.googlesource.com/8129
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Assembly code for X25519 wasn't included on OS X when built with
build systems other than CMake, which lead to a SIGTRAP due to a
missing x25519_x86_64.
Reported by Gurgen Hrachyan.
Change-Id: Ib6026f31cce0405ec3e75d8a52bf0940e57c62c8
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/8111
Reviewed-by: David Benjamin <davidben@google.com>
This commit adds coverage of the "offer" (first) step, as well as
testing all outputs of the "accept" (second) step, not just the shared
key.
Change-Id: Id11fe24029abc302442484a6c01fa496a1578b3a
Reviewed-on: https://boringssl-review.googlesource.com/8100
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL was actually super-buggy here (though known bugs on our end have been
fixed), but pyOpenSSL was confused and incorrectly documented that callers call
SSL_read after SSL_shutdown to do bidi shutdown, so we should probably support
this. Add a test that it works.
Change-Id: I2b6d012161330aeb4cf894bae3a0b6a55d53c70d
Reviewed-on: https://boringssl-review.googlesource.com/8093
Reviewed-by: Adam Langley <agl@google.com>
This keeps the naming convention in line with the actual spec.
Change-Id: I34673f78dbc29c1659b4da0e49677ebe9b79636b
Reviewed-on: https://boringssl-review.googlesource.com/8090
Reviewed-by: David Benjamin <davidben@google.com>
The test vectors are taken from the reference implementation, modified
to output the results of its random-number generator, and the results of
key generation prior to SHA3. This allows the interoperability of the
two implementations to be tested somewhat.
To accomplish the testing, this commit creates a new, lower-level API
that leaves the generation of random numbers and all wire encoding and
decoding up to the caller.
Change-Id: Ifae3517696dde4be4a0b7c1998bdefb789bac599
Reviewed-on: https://boringssl-review.googlesource.com/8070
Reviewed-by: Adam Langley <agl@google.com>
Now that we no longer support Windows XP, this is available.
Unfortunately, the public header version of CRYPTO_MUTEX means we
still can't easily merge CRYPTO_MUTEX and CRYPTO_STATIC_MUTEX.
BUG=37
Change-Id: If309de3f06e0854c505083b72fd64d1dbb3f4563
Reviewed-on: https://boringssl-review.googlesource.com/8081
Reviewed-by: Adam Langley <agl@google.com>
Windows SRWLOCK requires you call different functions here. Split
them up in preparation for switching Windows from CRITICAL_SECTION.
BUG=37
Change-Id: I7b5c6a98eab9ae5bb0734b805cfa1ff334918f35
Reviewed-on: https://boringssl-review.googlesource.com/8080
Reviewed-by: Adam Langley <agl@google.com>
This is easier to deploy, and more obvious. This commit reverts a few
pieces of e25775bc, but keeps most of it.
Change-Id: If8d657a4221c665349c06041bb12fffca1527a2c
Reviewed-on: https://boringssl-review.googlesource.com/8061
Reviewed-by: Adam Langley <agl@google.com>
This code has caused a long history of problems. This change rewrites it
completely with something that is, hopefully, much simplier and robust
and adds more testing.
Change-Id: Ibeef51f9386afd95d5b73316e451eb3a2d7ec4e0
Reviewed-on: https://boringssl-review.googlesource.com/8033
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c7eae5a326. pyOpenSSL
expects to be able to call |SSL_read| after a shutdown and get EOF.
Change-Id: Icc5faa09d644ec29aac99b181dac0db197f283e3
Reviewed-on: https://boringssl-review.googlesource.com/8060
Reviewed-by: Adam Langley <agl@google.com>
The TLS 1.3 spec has an explicit nonce construction for AEADs that
requires xoring the IV and sequence number.
Change-Id: I77145e12f7946ffb35ebeeb9b2947aa51058cbe9
Reviewed-on: https://boringssl-review.googlesource.com/8042
Reviewed-by: Adam Langley <agl@google.com>
Constants representing TLS 1.3 are added to allow for future work to be
flagged on TLS1_3_VERSION. To prevent BoringSSL from negotiating the
non-existent TLS 1.3 version, it is explicitly disabled using
SSL_OP_NO_TLSv1_3.
Change-Id: Ie5258a916f4c19ef21646c4073d5b4a7974d6f3f
Reviewed-on: https://boringssl-review.googlesource.com/8041
Reviewed-by: Adam Langley <agl@google.com>
This renames the Channel ID EncryptedExtensions message to allow for
compatibility with TLS 1.3 EncryptedExtensions.
Change-Id: I5b67d00d548518045554becb1b7213fba86731f2
Reviewed-on: https://boringssl-review.googlesource.com/8040
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's bbio logic is kind of crazy. It would be good to eventually do the
buffering in a better way (notably, bbio is fragile, if not outright broken,
for DTLS). In the meantime, this fixes a number of bugs where the existence of
bbio was leaked in the public API and broke things.
- SSL_get_wbio returned the bbio during the handshake. It must always return
the BIO the consumer configured. In doing so, internal accesses of
SSL_get_wbio should be switched to ssl->wbio since those want to see bbio.
For consistency, do the same with rbio.
- The logic in SSL_set_rfd, etc. (which I doubt is quite right since
SSL_set_bio's lifetime is unclear) would get confused once wbio got wrapped.
Those want to compare to SSL_get_wbio.
- If SSL_set_bio was called mid-handshake, bbio would get disconnected and lose
state. It forgets to reattach the bbio afterwards. Unfortunately, Conscrypt
does this a lot. It just never ended up calling it at a point where the bbio
would cause problems.
- Make more explicit the invariant that any bbio's which exist are always
attached. Simplify a few things as part of that.
Change-Id: Ia02d6bdfb9aeb1e3021a8f82dcbd0629f5c7fb8d
Reviewed-on: https://boringssl-review.googlesource.com/8023
Reviewed-by: Kenny Root <kroot@google.com>
Reviewed-by: Adam Langley <agl@google.com>
GetConfigPtr was a silly name. GetTestConfig matches the type and GetTestState.
Change-Id: I9998437a7be35dbdaab6e460954acf1b95375de0
Reviewed-on: https://boringssl-review.googlesource.com/8024
Reviewed-by: Adam Langley <agl@google.com>
The 'elliptic_curves' extension is being renamed to 'supported_groups'
in the TLS 1.3 draft, and most of the curve-specific methods are
generalized to groups/group IDs.
Change-Id: Icd1a1cf7365c8a4a64ae601993dc4273802610fb
Reviewed-on: https://boringssl-review.googlesource.com/7955
Reviewed-by: David Benjamin <davidben@google.com>
Also give the main page a title.
Change-Id: I6db588a9454d90a5974de5446d58d709f84d1906
Reviewed-on: https://boringssl-review.googlesource.com/8020
Reviewed-by: Adam Langley <agl@google.com>
open_iscsi assumes that it can get |OPENSSL_malloc| after including only
pem.h and err.h. Since pem.h already includes quite a lot, this change
adds crypto.h to that set so that open_iscsi is happy.
Change-Id: I6dc06c27088ce3ca46c1ab53bb29650033cba267
Reviewed-on: https://boringssl-review.googlesource.com/8031
Reviewed-by: David Benjamin <davidben@google.com>
The key schedule in TLS 1.3 requires a separate Extract and Expand phase
for the cryptographic computations.
Change-Id: Ifdac1237bda5212de5d4f7e8db54e202151d45ec
Reviewed-on: https://boringssl-review.googlesource.com/7983
Reviewed-by: David Benjamin <davidben@google.com>
CECPQ1 is a new key exchange that concatenates the results of an X25519
key agreement and a NEWHOPE key agreement.
Change-Id: Ib919bdc2e1f30f28bf80c4c18f6558017ea386bb
Reviewed-on: https://boringssl-review.googlesource.com/7962
Reviewed-by: David Benjamin <davidben@google.com>
Use of strdup, close, lseek, read, and write prevent linking
statically againt libcmt.lib.
Change-Id: I04f7876ec0f03f29f000bbcc6b2ccdec844452d2
Reviewed-on: https://boringssl-review.googlesource.com/8010
Reviewed-by: David Benjamin <davidben@google.com>
This is consistent with the new convention in ssl_ecdh.c.
Along the way, change newhope_test.c to not iterate 1000 times over each
test.
Change-Id: I7a500f45b838eba8f6df96957891aa8e880ba089
Reviewed-on: https://boringssl-review.googlesource.com/8012
Reviewed-by: David Benjamin <davidben@google.com>
The recipes need to run with a funny GOROOT and we were clearing the
environment.
BUG=26
Change-Id: If233a16e060533ad3fa6f215ce596456c2d7afa5
Reviewed-on: https://boringssl-review.googlesource.com/7988
Reviewed-by: Adam Langley <agl@google.com>
This will be used by the bots to get adb and the NDK.
BUG=26
Change-Id: Iae07a380c49b4990f0aa7d73c4f0b399924b9784
Reviewed-on: https://boringssl-review.googlesource.com/7986
Reviewed-by: Adam Langley <agl@google.com>
We now have a copy of android-cmake. Also remove the mention of running cmake
twice. It seems to work fine once?
The API level also got specified twice somehow.
BUG=26
Change-Id: I1331b079a4d8531cd53f7de3605ac318c14b3e26
Reviewed-on: https://boringssl-review.googlesource.com/7985
Reviewed-by: Adam Langley <agl@google.com>
This will let the recipes use the copy pulled from Chromium's android_tools.
BUG=26
Change-Id: Ica6519223b9fb6daef30f3e14c72ef6422de0f6c
Reviewed-on: https://boringssl-review.googlesource.com/7982
Reviewed-by: Adam Langley <agl@google.com>
We don't use find_package/find_program on android to find go/perl
because the android toolchain reconfigure the $PATH. The pervious
way of solving this was to let ninja look for go/perl on the $PATH
but this approach prevented us from specifying explicit go/perl
executables what is needed for hermetic build using prebuilts. This
CL changes the Android specific discovery rule to only set
GO_EXECUTABLE and PERL_EXECUTABLE if they are not specified on the
command line or inside the toolchain file.
Change-Id: Ib6ef69707749073f2b79244ebb301502b2a5a34a
Reviewed-on: https://boringssl-review.googlesource.com/8000
Reviewed-by: David Benjamin <davidben@google.com>
We don't have any of these.
Change-Id: I8d12284fbbab0ff35ac32d35a5f2eba326ab79f8
Reviewed-on: https://boringssl-review.googlesource.com/7981
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Those checks contradict an assert up in read_app_data. This is part of
shrinking read_bytes further into get_record and its callers until it goes
away. Here, this kind of policy should be controlled by the callers.
Change-Id: If8f9a45b8b95093beab1b3d4abcd31da55c65322
Reviewed-on: https://boringssl-review.googlesource.com/7954
Reviewed-by: Adam Langley <agl@google.com>
There is no good reason why this needs to be this way. Later work should make
this all use a much more appropriate design. In the meantime, leave a note here
so this does not look accidental.
Change-Id: I7599dea7a474f54e26d9ab175b0e3cada99a974d
Reviewed-on: https://boringssl-review.googlesource.com/7951
Reviewed-by: Adam Langley <agl@google.com>
This was needed because ssl3_get_message would get confused if init_num were
not set back to zero when reading the next message. However, ssl3_get_message
now treats init_num only as an output, not an input. (The message sending logic
and the individual handshake states still use it, so we can't get rid of it
altogether yet.)
I've kept the init_num reset at the start and end of the handshake loop alone
for now since that's more about initialization and cleanup. Though I believe
they too do not do anything.
Change-Id: I64bbdd82122498de32364e7edb3b00b166059ecd
Reviewed-on: https://boringssl-review.googlesource.com/7950
Reviewed-by: Adam Langley <agl@google.com>
They're completely unused now. The handshake message reassembly logic should
not depend on the state machine. This should partially free it up (ugly as it
is) to be shared with a future TLS 1.3 implementation while, in parallel, it
and the layers below, get reworked. This also cuts down on the number of states
significantly.
Partially because I expect we'd want to get ssl_hash_message_t out of there
too. Having it in common code is fine, but it needs to be in the (supposed to
be) protocol-agnostic handshake state machine, not the protocol-specific
handshake message layer.
Change-Id: I12f9dc57bf433ceead0591106ab165d352ef6ee4
Reviewed-on: https://boringssl-review.googlesource.com/7949
Reviewed-by: Adam Langley <agl@google.com>
