Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Replace unsigned long with the appropriate sized integer type.
Change-Id: I7b4641d84568f6c11efa25350a9e488a556fc92e
Reviewed-on: https://boringssl-review.googlesource.com/3766
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
It happens to give the same value anyway (64 + 16), but only on accident.
Change-Id: I1415f4015e3de472dbeb9ada0d92607c9d1bcd40
Reviewed-on: https://boringssl-review.googlesource.com/3780
Reviewed-by: Adam Langley <agl@google.com>
This transcription bug comes from the start of BoringSSL and, as you can
imagine, was a complete delight to track down.
Change-Id: I3051934195098a1d3bf893b154389ec7f14d3609
Reviewed-on: https://boringssl-review.googlesource.com/3740
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Instead, add a separate init_with_direction hook. Normal AEADs ignore the
direction, while legacy AEADs must be initialized with it. This avoids
maintaining extra state to support the delayed initialization.
Change-Id: I25271f0e56ee2783a2fd4d4026434154d58dc0a8
Reviewed-on: https://boringssl-review.googlesource.com/3731
Reviewed-by: Adam Langley <agl@google.com>
There's no good reason to do this, and it doesn't work; HMAC checks the length
of the key and runs it through the hash function if too long. The reuse occurs
after this check.
This allows us to shave 132 bytes off HMAC_CTX as this was the only reason it
ever stored the original key. It also slightly simplifies HMAC_Init_ex's
logic.
Change-Id: Ib56aabc3630b7178f1ee7c38ef6370c9638efbab
Reviewed-on: https://boringssl-review.googlesource.com/3733
Reviewed-by: Adam Langley <agl@google.com>
(There are times when I actually miss C++ templates.)
Change-Id: I3db56e4946ae4fb919105fa33e2cfce3c7542d37
Reviewed-on: https://boringssl-review.googlesource.com/3700
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7b6acc9004beb7b7090de1837814ccdff2e9930e
Reviewed-on: https://boringssl-review.googlesource.com/3680
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
EC_GROUP_copy is an rather unfriendly function; it doesn't work if the groups
have different[*] underlying EC_METHODs, but this notion is not exposed through
the API. I found no callers of EC_GROUP_copy in external code.
This leaves the precompute_mult functions as the remaining mutable API exposed
through EC_GROUP.
[*] Though, of the two EC_METHODs right now, simple.c is entirely unused.
Change-Id: Iabb52518005250fb970e12b3b0ea78b4f6eff4a0
Reviewed-on: https://boringssl-review.googlesource.com/3631
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
(I got this wrong when reading the OpenSSL code.)
Change-Id: Ib289ef41d0ab5a3157ad8b9454d2de96d1f86c22
Reviewed-on: https://boringssl-review.googlesource.com/3620
Reviewed-by: Adam Langley <agl@google.com>
There is exactly one implementation and it doesn't fail. Plus a cleanup
function that can fail is very bad manners; the caller has no choice but to
leak at that point.
Change-Id: I5b524617ef37bc7d92273472fa742416ea7dfd43
Reviewed-on: https://boringssl-review.googlesource.com/3564
Reviewed-by: Adam Langley <agl@google.com>
RC4_CHAR is a bit in the x86(-64) CPUID information that switches the
RC4 asm code from using an array of 256 uint32_t's to 256 uint8_t's. It
was originally written for the P4, where the uint8_t style was faster.
(On modern chips, setting RC4_CHAR took RC4-MD5 from 458 to 304 MB/s.
Although I wonder whether, on a server with many connections, using less
cache wouldn't be better.)
However, I'm not too worried about a slowdown of RC4 on P4 systems these
days (the last new P4 chip was released nine years ago) and I want the
code to be simplier.
Also, RC4_CHAR was set when the CPUID family was 15, but Intel actually
lists 15 as a special code meaning "also check the extended family
bits", which the asm didn't do.
The RC4_CHAR support remains in the RC4 asm code to avoid drift with
upstream.
Change-Id: If3febc925a83a76f453b9e9f8de5ee43759927c6
Reviewed-on: https://boringssl-review.googlesource.com/3550
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
It was a mistake to remove this in the first place.
Change-Id: Icd97b4db01e49151daa41dd892f9da573ddc2842
Reviewed-on: https://boringssl-review.googlesource.com/3541
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This empty header file exists only to make older code compile. But I
named it incorrectly! Upstream doesn't have the underscore in the name.
Change-Id: I96654b7e17d84a5f2810e6eb20fe7bfb22f855fd
Reviewed-on: https://boringssl-review.googlesource.com/3540
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called in outside code. This too seems to be a remnant of the DSA
PKIX optional parameter stuff. This is confirmed both by a removed comment and
by the brief documentation at http://www.umich.edu/~x509/ssleay/x509_pkey.html
RFC 5480 does not allow ECDSA keys to be missing parameters, so this logic is
incorrect for ECDSA anyway. It was also failing to check
EVP_PKEY_copy_parameters' return value. And that logic looks pretty suspect if
you have a chain made up multiple certificate types.
Change-Id: Id6c60659a0162356c7f3eae5c797047366baae1c
Reviewed-on: https://boringssl-review.googlesource.com/3485
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
Reduces number of silly casts in OpenSSL code and likely most
applications. Consistent with (char *) for "peername" value from
X509_check_host() and X509_VERIFY_PARAM_get0_peername().
(Imported from upstream's e83c913723fac7432a7706812f12394aaa00e8ce.)
Change-Id: Id0fc11773a0cee8933978cd4bdbd8251fd7cfb5f
Pass address of X509_VERIFY_PARAM_ID peername to X509_check_host().
(Imported from upstream's 55fe56837a65ff505b492aa6aee748bf5fa91fec.)
Change-Id: Ic21bfb361b8eb25677c4c2175882fa95ea44fc31
(Imported from upstream's 8abffa4a73fcbf6536e0a42d736ed9211a8204ea,
9624b50d51 and
41e3ebd5abacfdf98461cdeb6fa97a4175b7aad3.)
Change-Id: Ic9099eb5704b19b4500229e89351371cc6184f9d
clang-format has changed a little. This is a semantic no-op but it makes
the diff in the next change smaller.
Change-Id: Ia492a81340a868b888d619a1c7740d1a86845e92
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
Some files in crypto/x509 were moved from crypto/asn1, so they emit errors from
another module. Fix make_errors.go to account for this: cross module errors
must use the foreign module as the first argument to OPENSSL_PUT_ERROR. Both
the function code and the error code should be declared in the foreign module.
Update make_errors.go to ignore cross-module error lines when deciding which
function tokens to emit.
Change-Id: Ic38377ddd56e22d033ef91318c30510762f6445d
Reviewed-on: https://boringssl-review.googlesource.com/3383
Reviewed-by: Adam Langley <agl@google.com>
Also, Clang doesn't like static asserts with the same message and
ERR_free_strings should still free the error queues, although it's badly
misnamed now.
Change-Id: Ibff8eb50f93c0b56c3eeb17a300e8501a31c3ab8
Reviewed-on: https://boringssl-review.googlesource.com/3370
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
OpenSSL's internal names for the ciphers are not the standard ones and are not
easy to consistently map to the standard ones. Add an API to get the real names
out. (WebRTC wants an API to get the standard names out.)
Also change some incorrect flags on SHA-256 TLS 1.2 ciphers;
SSL_HANDSHAKE_MAC_DEFAULT and SSL_HANDSHAKE_MAC_SHA256 are the same after TLS
1.2. A TLS 1.2 cipher should be tagged explicitly with SHA-256. (This avoids
tripping a check in SSL_CIPHER_get_rfc_name which asserts that default-hash
ciphers only ever use SHA-1 or MD5 for the bulk cipher MAC.)
Change-Id: Iaec2fd4aa97df29883094d3c2ae60f0ba003bf07
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
The ENGINE code had a concept of a stable-ABI for METHODs, because that
might be a useful thing in the future when people want to have blobs
that wrap PKCS#11 or something.
However, at the moment nobody uses this feature and it didn't work very
well anyway: I hadn't updated |ENGINE_free| to free them all and
|set_method| was copying the methods, but not resetting the |is_static|
flag.
This change removes support for non-static methods. We can always put it
back later if we need.
Change-Id: Ic7401c8cb1cadd46b26a215f85bc48562efe9919
Reviewed-on: https://boringssl-review.googlesource.com/3300
Reviewed-by: Adam Langley <agl@google.com>
SSL_AEAD_CTX ownership is currently too confusing. Instead, rely on the lack of
renego, so the previous epoch always uses the NULL cipher. (Were we to support
DTLS renego, we could keep track of s->d1->last_aead_write_ctx like
s->d1->last_write_sequence, but it isn't worth it.)
Buffered messages also tracked an old s->session, but this is unnecessary. The
s->session NULL check in tls1_enc dates to the OpenSSL initial commit and is
redundant with the aead NULL check.
Change-Id: I9a510468d95934c65bca4979094551c7536980ae
Reviewed-on: https://boringssl-review.googlesource.com/3234
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
Tag number 31 is a long form tag that requires multiple octets. It
cannot be handled by adding a single uint8. Changed CBB_add_asn1()
to return 0 when it is passed in the extension for tag 31.
Change-Id: Ia33936d4f174d1a7176eb11da0b5c7370efb9416
CBS_get_asn1() and CBS_get_any_asn1_element() only support the single
byte ASN.1 identifier octets (aka short form tags). Tag number 31 is
the start of the multi-byte long form per X.690 section 8.1.2.4.
Change-Id: I892600f4946e880a4ff03d219181116ef04f5372
Reviewed-on: https://boringssl-review.googlesource.com/3241
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Forgot to export those when adding them.
Change-Id: I206f488eb38e5ff55b8c212911aced0cf28b7664
Reviewed-on: https://boringssl-review.googlesource.com/3090
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 2747d73c1466c487daf64a1234b6fe2e8a62ac75.)
Also fix up some stylistic issues in conf.c and clarify empty case in
documentation.
Change-Id: Ibacabfab2339d7566d51db4b3ac4579aec0d1fbf
Reviewed-on: https://boringssl-review.googlesource.com/3023
Reviewed-by: Adam Langley <agl@google.com>
David Benjamin
Adam Langley
Adam Langley
Doug Hogan