Fix spelling of "original" and "occurred" in new gofmt docs. The same
misspelling of "occurred" was also present in crypto/tls, I fixed it there as
well.
Change-Id: I67b4f1c09bd1a2eb1844207d5514f08a9f525ff9
Reviewed-on: https://go-review.googlesource.com/33138
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I used the slowtests.go tool as described in
https://golang.org/cl/32684 on packages that stood out.
go test -short std drops from ~56 to ~52 seconds.
This isn't a huge win, but it was mostly an exercise.
Updates #17751
Change-Id: I9f3402e36a038d71e662d06ce2c1d52f6c4b674d
Reviewed-on: https://go-review.googlesource.com/32751
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, the selection of a client certificate done internally based
on the limitations given by the server's request and the certifcates in
the Config. This means that it's not possible for an application to
control that selection based on details of the request.
This change adds a callback, GetClientCertificate, that is called by a
Client during the handshake and which allows applications to select the
best certificate at that time.
(Based on https://golang.org/cl/25570/ by Bernd Fix.)
Fixes#16626.
Change-Id: Ia4cea03235d2aa3c9fd49c99c227593c8e86ddd9
Reviewed-on: https://go-review.googlesource.com/32115
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
VerifyPeerCertificate returns an error if the peer should not be
trusted. It will be called after the initial handshake and before
any other verification checks on the cert or chain are performed.
This provides the callee an opportunity to augment the certificate
verification.
If VerifyPeerCertificate is not nil and returns an error,
then the handshake will fail.
Fixes#16363
Change-Id: I6a22f199f0e81b6f5d5f37c54d85ab878216bb22
Reviewed-on: https://go-review.googlesource.com/26654
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change adds support for the ChaCha20-Poly1305 AEAD to crypto/tls,
as specified in https://tools.ietf.org/html/rfc7905.
Fixes#15499.
Change-Id: Iaa689be90e03f208c40b574eca399e56f3c7ecf1
Reviewed-on: https://go-review.googlesource.com/30957
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
X25519 (RFC 7748) is now commonly used for key agreement in TLS
connections, as specified in
https://tools.ietf.org/html/draft-ietf-tls-curve25519-01.
This change adds support for that in crypto/tls, but does not enabled it
by default so that there's less test noise. A future change will enable
it by default and will update all the test data at the same time.
Change-Id: I91802ecd776d73aae5c65bcb653d12e23c413ed4
Reviewed-on: https://go-review.googlesource.com/30824
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When updating the test data against OpenSSL, the handshake can fail and
the stdout/stderr output of OpenSSL is very useful in finding out why.
However, printing that output has been broken for some time because its
no longer sent to a byte.Buffer. This change fixes that.
Change-Id: I6f846c7dc80f1ccee9fa1be36f0b579b3754e05f
Reviewed-on: https://go-review.googlesource.com/30823
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We will need OpenSSL 1.1.0 in order to test some of the features
expected for Go 1.8. However, 1.1.0 also disables (by default) some
things that we still want to test, such as RC4, 3DES and SSLv3. Thus
developers wanting to update the crypto/tls test data will need to build
OpenSSL from source.
This change updates the test data with transcripts generated by 1.1.0
(in order to reduce future diffs) and also causes a banner to be printed
if 1.1.0 is not used when updating.
(The test for an ALPN mismatch is removed because OpenSSL now terminates
the connection with a fatal alert if no known ALPN protocols are
offered. There's no point testing against this because it's an OpenSSL
behaviour.)
Change-Id: I957516975e0b8c7def84184f65c81d0b68f1c551
Reviewed-on: https://go-review.googlesource.com/30821
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since there's no aspect of key logging that OpenSSL can check for us,
the tests for it might as well just connect to another goroutine as this
is lower-maintainance.
Change-Id: I746d1dbad1b4bbfc8ef6ccf136ee4824dbda021e
Reviewed-on: https://go-review.googlesource.com/30089
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joonas Kuorilehto <joneskoo@derbian.fi>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After renegotiation support was added (af125a5193c) it's possible for a
Write to block on a Read when racing to complete the handshake:
1. The Write determines that a handshake is needed and tries to
take the neccesary locks in the correct order.
2. The Read also determines that a handshake is needed and wins
the race to take the locks.
3. The Read goroutine completes the handshake and wins a race
to unlock and relock c.in, which it'll hold when waiting for
more network data.
If the application-level protocol requires the Write to complete before
data can be read then the system as a whole will deadlock.
Unfortunately it doesn't appear possible to reverse the locking order of
c.in and handshakeMutex because we might read a renegotiation request at
any point and need to be able to do a handshake without unlocking.
So this change adds a sync.Cond that indicates that a goroutine has
committed to doing a handshake. Other interested goroutines can wait on
that Cond when needed.
The test for this isn't great. I was able to reproduce the deadlock with
it only when building with -race. (Because -race happened to alter the
timing just enough.)
Fixes#17101.
Change-Id: I4e8757f7b82a84e46c9963a977d089f0fb675495
Reviewed-on: https://go-review.googlesource.com/29164
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Since 2a8c81ff handshake messages are not written directly to wire but
buffered. If an error happens at the wrong time the alert will be
written to the buffer but never flushed, causing an EOF on the client
instead of a more descriptive alert.
Thanks to Brendan McMillion for reporting this.
Fixes#17037
Change-Id: Ie093648aa3f754f4bc61c2e98c79962005dd6aa2
Reviewed-on: https://go-review.googlesource.com/28818
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In Go 1.0, the Config struct consisted only of exported fields.
In Go 1.1, it started to grow private, uncopyable fields (sync.Once,
sync.Mutex, etc).
Ever since, people have been writing their own private Config.Clone
methods, or risking it and doing a language-level shallow copy and
copying the unexported sync variables.
Clean this up and export the Config.clone method as Config.Clone.
This matches the convention of Template.Clone from text/template and
html/template at least.
Fixes#15771
Updates #16228 (needs update in x/net/http2 before fixed)
Updates #16492 (not sure whether @agl wants to do more)
Change-Id: I48c2825d4fef55a75d2f99640a7079c56fce39ca
Reviewed-on: https://go-review.googlesource.com/28075
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Add support for writing TLS client random and master secret
in NSS key log format.
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format
Normally this is enabled by a developer debugging TLS based
applications, especially HTTP/2, by setting the KeyLogWriter
to an open file. The keys negotiated in handshake are then
logged and can be used to decrypt TLS sessions e.g. in Wireshark.
Applications may choose to add support similar to NSS where this
is enabled by environment variable, but no such mechanism is
built in to Go. Instead each application must explicitly enable.
Fixes#13057.
Change-Id: If6edd2d58999903e8390b1674ba4257ecc747ae1
Reviewed-on: https://go-review.googlesource.com/27434
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If SetSessionTicketKeys was called on a fresh tls.Config, the configured
keys would be overridden with a random key by serverInit.
Fixes#15421.
Change-Id: I5d6cc81fc3e5de4dfa15eb614d102fb886150d1b
Reviewed-on: https://go-review.googlesource.com/27317
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These were new with TLS 1.2 and, reportedly, some servers require it.
Since it's easy, this change adds suport for three flavours of
AES-128-CBC with SHA-256 MACs.
Other testdata/ files have to be updated because this changes the list
of cipher suites offered by default by the client.
Fixes#15487.
Change-Id: I1b14330c31eeda20185409a37072343552c3464f
Reviewed-on: https://go-review.googlesource.com/27315
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fixes some 40 warnings from go vet.
Fixes#16134.
Change-Id: Ib9fcba275fe692f027a2a07b581c8cf503b11087
Reviewed-on: https://go-review.googlesource.com/24287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This change causes TLS handshake messages to be buffered and written in
a single Write to the underlying net.Conn.
There are two reasons to want to do this:
Firstly, it's slightly preferable to do this in order to save sending
several, small packets over the network where a single one will do.
Secondly, since 37c28759ca46cf381a466e32168a793165d9c9e9 errors from
Write have been returned from a handshake. This means that, if a peer
closes the connection during a handshake, a “broken pipe” error may
result from tls.Conn.Handshake(). This can mask any, more detailed,
fatal alerts that the peer may have sent because a read will never
happen.
Buffering handshake messages means that the peer will not receive, and
possibly reject, any of a flow while it's still being written.
Fixes#15709
Change-Id: I38dcff1abecc06e52b2de647ea98713ce0fb9a21
Reviewed-on: https://go-review.googlesource.com/23609
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds Config.Renegotiation which controls whether a TLS
client will accept renegotiation requests from a server. This is used,
for example, by some web servers that wish to “add” a client certificate
to an HTTPS connection.
This is disabled by default because it significantly complicates the
state machine.
Originally, handshakeMutex was taken before locking either Conn.in or
Conn.out. However, if renegotiation is permitted then a handshake may
be triggered during a Read() call. If Conn.in were unlocked before
taking handshakeMutex then a concurrent Read() call could see an
intermediate state and trigger an error. Thus handshakeMutex is now
locked after Conn.in and the handshake functions assume that Conn.in is
locked for the duration of the handshake.
Additionally, handshakeMutex used to protect Conn.out also. With the
possibility of renegotiation that's no longer viable and so
writeRecordLocked has been split off.
Fixes#5742.
Change-Id: I935914db1f185d507ff39bba8274c148d756a1c8
Reviewed-on: https://go-review.googlesource.com/22475
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This promotes a connection hang during TLS handshake to a proper error.
This doesn't fully address #14539 because the error reported in that
case is a write-on-socket-not-connected error, which implies that an
earlier error during connection setup is not being checked, but it is
an improvement over the current behaviour.
Updates #14539.
Change-Id: I0571a752d32d5303db48149ab448226868b19495
Reviewed-on: https://go-review.googlesource.com/19990
Reviewed-by: Adam Langley <agl@golang.org>
This is a followup change to #13111 for filtering out IPv6 literals and
absolute FQDNs from being as the SNI values.
Updates #13111.
Fixes#14404.
Change-Id: I09ab8d2a9153d9a92147e57ca141f2e97ddcef6e
Reviewed-on: https://go-review.googlesource.com/19704
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
During the TLS handshake, check the cipher suite the server selects is
one of those offered in the ClientHello. The code was checking it was
in the larger list that was sometimes whittled down for the ClientHello.
Fixes#13174
Change-Id: Iad8eebbcfa5027f30403b9700c43cfa949e135bb
Reviewed-on: https://go-review.googlesource.com/16698
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
(This relands commit a4dcc692011bf1ceca9b1a363fd83f3e59e399ee.)
https://tools.ietf.org/html/rfc6066#section-3 states:
“Literal IPv4 and IPv6 addresses are not permitted in "HostName".”
However, if an IP literal was set as Config.ServerName (which could
happen as easily as calling Dial with an IP address) then the code would
send the IP literal as the SNI value.
This change filters out IP literals, as recognised by net.ParseIP, from
being sent as the SNI value.
Fixes#13111.
Change-Id: I6e544a78a01388f8fe98150589d073b917087f75
Reviewed-on: https://go-review.googlesource.com/16776
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
https://tools.ietf.org/html/rfc6066#section-3 states:
“Literal IPv4 and IPv6 addresses are not permitted in "HostName".”
However, if an IP literal was set as Config.ServerName (which could
happen as easily as calling Dial with an IP address) then the code would
send the IP literal as the SNI value.
This change filters out IP literals, as recognised by net.ParseIP, from
being sent as the SNI value.
Fixes#13111.
Change-Id: Ie9ec7acc767ae172b48c9c6dd8d84fa27b1cf0de
Reviewed-on: https://go-review.googlesource.com/16742
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Strengthening VerifyHostname exposed the fact that for resumed
connections, ConnectionState().VerifiedChains was not being saved
and restored during the ClientSessionCache operations.
Do that.
This change just saves the verified chains in the client's session
cache. It does not re-verify the certificates when resuming a
connection.
There are arguments both ways about this: we want fast, light-weight
resumption connections (thus suggesting that we shouldn't verify) but
it could also be a little surprising that, if the verification config
is changed, that would be ignored if the same session cache is used.
On the server side we do re-verify client-auth certificates, but the
situation is a little different there. The client session cache is an
object in memory that's reset each time the process restarts. But the
server's session cache is a conceptual object, held by the clients, so
can persist across server restarts. Thus the chance of a change in
verification config being surprisingly ignored is much higher in the
server case.
Fixes#12024.
Change-Id: I3081029623322ce3d9f4f3819659fdd9a381db16
Reviewed-on: https://go-review.googlesource.com/13164
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds a new method to tls.Config, SetSessionTicketKeys, that
changes the key used to encrypt session tickets while the server is
running. Additional keys may be provided that will be used to maintain
continuity while rotating keys. If a ticket encrypted with an old key is
provided by the client, the server will resume the session and provide
the client with a ticket encrypted using the new key.
Fixes#9994
Change-Id: Idbc16b10ff39616109a51ed39a6fa208faad5b4e
Reviewed-on: https://go-review.googlesource.com/9072
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
Reviewed-by: Adam Langley <agl@golang.org>
This change adds support for serving and receiving Signed Certificate
Timestamps as described in RFC 6962.
The server is now capable of serving SCTs listed in the Certificate
structure. The client now asks for SCTs and, if any are received,
they are exposed in the ConnectionState structure.
Fixes#10201
Change-Id: Ib3adae98cb4f173bc85cec04d2bdd3aa0fec70bb
Reviewed-on: https://go-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Jonathan Rudenberg <jonathan@titanous.com>
Commit f1d669aee994b28e1afcfe974680565932d25b70 added support for
AES_256_GCM_SHA384 cipher suites as specified in RFC5289. However, it
did not take the arbitrary hash function into account in the TLS client
handshake when using client certificates.
The hashForClientCertificate method always returned SHA256 as its
hashing function, even if it actually used a different one to calculate
its digest. Setting up the connection would eventually fail with the
error "tls: failed to sign handshake with client certificate:
crypto/rsa: input must be hashed message".
Included is an additional test for this specific situation that uses the
SHA384 hash.
Fixes#9808
Change-Id: Iccbf4ab225633471ef897907c208ad31f92855a3
Reviewed-on: https://go-review.googlesource.com/7040
Reviewed-by: Adam Langley <agl@golang.org>
Run-TryBot: Adam Langley <agl@golang.org>
Generalizes PRF calculation for TLS 1.2 to support arbitrary hashes (SHA-384 instead of SHA-256).
Testdata were all updated to correspond with the new cipher suites in the handshake.
Change-Id: I3d9fc48c19d1043899e38255a53c80dc952ee08f
Reviewed-on: https://go-review.googlesource.com/3265
Reviewed-by: Adam Langley <agl@golang.org>
Adam (agl@) had already done an initial review of this CL in a branch.
Added ClientSessionState to Config which now allows clients to keep state
required to resume a TLS session with a server. A client handshake will try
and use the SessionTicket/MasterSecret in this cached state if the server
acknowledged resumption.
We also added support to cache ClientSessionState object in Config that will
be looked up by server remote address during the handshake.
R=golang-codereviews, agl, rsc, agl, agl, bradfitz, mikioh.mikioh
CC=golang-codereviews
https://golang.org/cl/15680043
The practice of storing reference connections for testing has worked
reasonably well, but the large blocks of literal data in the .go files
is ugly and updating the tests is a real problem because their number
has grown.
This CL changes the way that reference tests work. It's now possible to
automatically update the tests and the test data is now stored in
testdata/. This should make it easier to implement changes that affect
all connections, like implementing the renegotiation extension.
R=golang-codereviews, r
CC=golang-codereviews
https://golang.org/cl/42060044
Despite SHA256 support being required for TLS 1.2 handshakes, some
servers are aborting handshakes that don't offer SHA1 support.
This change adds support for signing TLS 1.2 ServerKeyExchange messages
with SHA1. It does not add support for signing TLS 1.2 client
certificates with SHA1 as that would require the handshake to be
buffered.
Fixes#6618.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/15650043
With TLS 1.2, when sending client certificates the code was omitting
the new (in TLS 1.2) signature and hash fields.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/13413050
Add support for ECDHE-ECDSA (RFC4492), which uses an ephemeral server
key pair to perform ECDH with ECDSA signatures. Like ECDHE-RSA,
ECDHE-ECDSA also provides PFS.
R=agl
CC=golang-dev
https://golang.org/cl/7006047
This does not include AES-GCM yet. Also, it assumes that the handshake and
certificate signature hash are always SHA-256, which is true of the ciphersuites
that we currently support.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/10762044
The significant change between TLS 1.0 and 1.1 is the addition of an explicit IV in the case of CBC encrypted records. Support for TLS 1.1 is needed in order to support TLS 1.2.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/7880043
Currently we only check the leaf node's issuer against the list of
distinguished names in the server's CertificateRequest message. This
will fail if the client certiciate has more than one certificate in
the path and the leaf node issuer isn't in the list of distinguished
names, but the issuer's issuer was in the distinguished names.
R=agl, agl
CC=gobot, golang-dev
https://golang.org/cl/9795043
A test added in b37d2fdcc4d9 didn't work with some values of GOMAXPROCS
because the defer statements were in the wrong order: the Pipe could be
closed before the TLS Client was.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/9187047
OpenSSL can be configured to send empty records in order to randomise
the CBC IV. This is an early version of 1/n-1 record splitting (that Go
does) and is quite reasonable, but it results in tls.Conn.Read
returning (0, nil).
This change ignores up to 100 consecutive, empty records to avoid
returning (0, nil) to callers.
Fixes 5309.
R=golang-dev, r, minux.ma
CC=golang-dev
https://golang.org/cl/8852044
