This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I5777b73f485da6534b407e6c531f8293898b9c06
Reviewed-on: https://boringssl-review.googlesource.com/5461
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3b085cd13295e83c578c549763f0de82f39499a2
Reviewed-on: https://boringssl-review.googlesource.com/5460
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's not DER and always parses the entire thing.
Change-Id: Idb4b8b93d5bc3689d8c3ea34c38b529e50a4af61
Reviewed-on: https://boringssl-review.googlesource.com/5451
Reviewed-by: Adam Langley <agl@google.com>
smmintrin.h uses #if __cplusplus rather than #ifdef __cplusplus which
trips up warnings.
Change-Id: Ic2e0a64f0485a6e1d807c1e2d9d7f5bf8c64e296
Reviewed-on: https://boringssl-review.googlesource.com/5450
Reviewed-by: Adam Langley <agl@google.com>
See TODO comment being removed.
Change-Id: I92ce7018f88c24b3e2e61441397fda36b977d3b8
Reviewed-on: https://boringssl-review.googlesource.com/5435
Reviewed-by: Adam Langley <agl@google.com>
Rather, take a leaf out of Chromium's book and use MSVC's __cpuid and
_xgetbv built-in, with an inline assembly emulated version for other
compilers.
This preserves the behavior of the original assembly with the following
differences:
- CPUs without cpuid aren't support. Chromium's base/cpu.cc doesn't
check, and SSE2 support is part of our baseline; the perlasm code
is always built with OPENSSL_IA32_SSE2.
- The clear_xmm block in cpu-x86-asm.pl is removed. This was used to
clear some XMM-using features if OSXSAVE was set but XCR0 reports the
OS doesn't use XSAVE to store SSE state. This wasn't present in the
x86_64 and seems wrong. Section 13.5.2 of the Intel manual, volume 1,
explicitly says SSE may still be used in this case; the OS may save
that state in FXSAVE instead. A side discussion on upstream's RT#2633
agrees.
- The old code ran some AMD CPUs through the "intel" codepath and some
went straight to "generic" after duplicating some, but not all, logic.
The AMD copy didn't clear some reserved bits and didn't query CPUID 7
for AVX2 support. This is moot since AMD CPUs today don't support
AVX2, but it seems they're expected to in the future?
- Setting bit 10 is dropped. This doesn't appear to be queried anywhere,
was 32-bit only, and seems a remnant of upstream's
14e21f863a3e3278bb8660ea9844e92e52e1f2f7.
Change-Id: I0548877c97e997f7beb25e15f3fea71c68a951d2
Reviewed-on: https://boringssl-review.googlesource.com/5434
Reviewed-by: Adam Langley <agl@google.com>
In the ancient times, before ex_data and OpenSSL, SSLeay supported a
single app_data slot in various types. Later app_data begat ex_data, and
app_data was replaced by compatibility macros to ex_data index zero.
Today, app_data is still in use, but ex_data never reserved index zero
for app_data. This causes some danger where, if the first ex_data
registration did not use NULL callbacks, the registration's callbacks
would collide with app_data.
Instead, add an option to the types with app_data to reserve index zero.
Also switch SSL_get_ex_data_X509_STORE_CTX_idx to always return zero
rather than allocate a new one. It used to be that you used
X509_STORE_CTX_get_app_data. I only found one consumer that we probably
don't care about, but, to be safe and since it's easy, go with the
conservative option. (Although SSL_get_ex_data_X509_STORE_CTX_idx wasn't
guaranteed to alias app_data, in practice it always did. No consumer
ever calls X509_STORE_CTX_get_ex_new_index.)
Change-Id: Ie75b279d60aefd003ffef103f99021c5d696a5e9
Reviewed-on: https://boringssl-review.googlesource.com/5313
Reviewed-by: Adam Langley <agl@google.com>
The OR seems to be correct. %r9d previously contains 1 for a non-Intel
CPU. The next line isolates the XOP bit but *also* preserves that 1.
This figures in later in in line 121 to avoid tagging as Intel. (Most
codepaths in the AMD-specific branch go straight to .Lgeneric, but some
go to .Lintel. This probably could be done more clearly as there's some
complicated code that's subtly different...)
Change-Id: Ie7b9566074498333f26416e46478e4f4df68194f
Reviewed-on: https://boringssl-review.googlesource.com/5433
Reviewed-by: Adam Langley <agl@google.com>
Some other reserved bits are repurposed. Also explicitly mention that
bit 20 is zero (formerly RC4_CHAR), so it's not accidentally repurposed
later.
Change-Id: Idc4b32efe089ae7b7295472c4488f75258b7f962
Reviewed-on: https://boringssl-review.googlesource.com/5432
Reviewed-by: Adam Langley <agl@google.com>
Consumers sometimes use ERR_LIB_USER + <favorite number> instead of
ERR_get_next_error_library. To avoid causing them grief, keep ERR_LIB_USER
last.
Change-Id: Id19ae7836c41d5b156044bd20d417daf643bdda2
Reviewed-on: https://boringssl-review.googlesource.com/5290
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
gyp doesn't allow two files to share the same name to avoid bugs in OS X
libtool, so asn1.c's need to all get a prefix.
Change-Id: I3593597912c49dd02655cae329fb253ed4f6f56d
Reviewed-on: https://boringssl-review.googlesource.com/5431
Reviewed-by: Adam Langley <agl@google.com>
Chromium's NaCl build has _POSIX_SOURCE already defined, so #undef it first.
The compiler used also dislikes static asserts with the same name.
Change-Id: I0283fbad1a2ccf98cdb0ca2a7965b15441806308
Reviewed-on: https://boringssl-review.googlesource.com/5430
Reviewed-by: Adam Langley <agl@google.com>
poly1305.h was missing exports. While here, chacha.h should also be exported.
Change-Id: I5da9c953d3e5a5ef76a3e96bc4794192abee3ae6
Reviewed-on: https://boringssl-review.googlesource.com/5420
Reviewed-by: Adam Langley <agl@google.com>
RFC 7359 includes tests for various edge cases. Also, as
CRYPTO_poly1305_update can be used single-shot and streaming, we should
explicitly stress both.
Change-Id: Ie44c203a77624be10397ad05f06ca98d937db76f
Reviewed-on: https://boringssl-review.googlesource.com/5410
Reviewed-by: Adam Langley <agl@google.com>
This allows BoringSSL to build on OpenBSD with gcc/g++ 4.9.2.
Change-Id: Icce23de87b0358a581124eb8cd37dc48a1f096c9
Reviewed-on: https://boringssl-review.googlesource.com/5401
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
Historically we had a bug around this and this change implements a test
that we were previously carrying internally.
Change-Id: Id181fedf66b2b385b54131ac91d74a31f86f0205
Reviewed-on: https://boringssl-review.googlesource.com/5380
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never used. (Only used upstream as part of some CMS hooks.)
Change-Id: I7c59badc3e4771d7debbef0c3e0def93dc605e7b
Reviewed-on: https://boringssl-review.googlesource.com/5274
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
It carefully NULLs all references to the buffer, so the failure cases
still need to call OPENSSL_free.
Change-Id: Ia14341ecea81296f94e467325ab6eff1362e987e
Reviewed-on: https://boringssl-review.googlesource.com/5271
Reviewed-by: Adam Langley <agl@google.com>
This is the first structure to be implemented with the new BIGNUM ASN.1
routines. Object reuse in the legacy d2i/i2d functions is implemented by
releasing whatever was in *out before and setting it to the
newly-allocated object. As with the new d2i_SSL_SESSION, this is a
weaker form of object reuse, but should suffice for reasonable callers.
As ECDSA_SIG is more likely to be parsed alone than as part of another
structure (and using CBB is slightly tedious), add convenient functions
which take byte arrays. For consistency with SSL_SESSION, they are named
to/from_bytes. from_bytes, unlike the CBS variant, rejects trailing
data.
Note this changes some test expectations: BER signatures now push an
error code. That they didn't do this was probably a mistake.
BUG=499653
Change-Id: I9ec74db53e70d9a989412cc9e2b599be0454caec
Reviewed-on: https://boringssl-review.googlesource.com/5269
Reviewed-by: Adam Langley <agl@google.com>
Now that 11c0f8e54c has landed, none of
the cases of the switch in |ssl3_ctrl| ever break and so the “return 1”
at the end of the function is unreachable. MSVC is unhappy about that.
Change-Id: I001dc63831ba60d93b622ac095297e2febc5f078
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
Since it resets leaf, private key, and chain, it makes sense to also
clear custom key method tables.
Change-Id: If511b8f15a44674c31d068d36984e9189c5a9071
Reviewed-on: https://boringssl-review.googlesource.com/5356
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for folding away certificate slots. extra_certs
and the slot-specific certificate chain will be the same.
SSL_CTX_get_extra_chain_certs already falls back to the slot-specific
chain if missing. SSL_CTX_get_extra_chain_certs_only is similar but
never falls back. This isn't very useful and is confusing with them
merged, so remove it.
BUG=486295
Change-Id: Ic708105bcf453dfe4e1969353d7eb7547ed2981b
Reviewed-on: https://boringssl-review.googlesource.com/5350
Reviewed-by: Adam Langley <agl@google.com>
The distinction was not well-enforced in the code. In fact, it wasn't
even possible to use the RSA_SIGN slot because ssl_set_pkey and
ssl_set_cert would always use the RSA_ENC slot.
A follow-up will fold away the mechanism altogether, but this is an easy
initial simplfication.
BUG=486295
Change-Id: I66b5bf3e6dc243dac7c75924c1c1983538e49060
Reviewed-on: https://boringssl-review.googlesource.com/5349
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
These are new as of 1.0.2, not terribly useful of APIs, and are the only
reason we have to retain so many NIDs in the TLS_SIGALGS structure.
Change-Id: I7237becca09acc2ec2be441ca17364f062253893
Reviewed-on: https://boringssl-review.googlesource.com/5347
Reviewed-by: Adam Langley <agl@google.com>
