The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
Add expectResumeRejected to note cases where we expect a resumption
handshake to be rejected. (This was previously done by adding a flag,
which is a little less clear.)
Also, save the result of crypto/tls.Conn.ConnectionState() rather than
repeat that a lot.
Change-Id: I963945eda5ce1f3040b655e2441174b918b216b3
Reviewed-on: https://boringssl-review.googlesource.com/4980
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Make sure we don't break that on accident.
Change-Id: I22d58d35170d43375622fe61e4a588d1d626a054
Reviewed-on: https://boringssl-review.googlesource.com/4960
Reviewed-by: Adam Langley <agl@google.com>
9a41d1b946 broke handling of multiple records in
a single packet. If |extend| is true, not all of the previous packet should be
consumed, only up to the record length.
Add a test which stresses the DTLS stack's handling of multiple handshake
fragments in a handshake record and multiple handshake records in a packet.
Change-Id: I96571098ad9001e96440501c4730325227b155b8
Reviewed-on: https://boringssl-review.googlesource.com/4950
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
Rather than duplicate all the various modifiers, which is quite
error-prone, write all the tests to a temporary array and then apply
modifiers afterwards.
Change-Id: I19bfeb83b722ed34e973f17906c5e071471a926a
Reviewed-on: https://boringssl-review.googlesource.com/4782
Reviewed-by: Adam Langley <agl@google.com>
We should be testing asynchronous renego.
BUG=429450
Change-Id: Ib7a5d42f2ac728f9ea0d80158eef63ad77cd77a4
Reviewed-on: https://boringssl-review.googlesource.com/4781
Reviewed-by: Adam Langley <agl@google.com>
Since we hope to eventually lose server-side renegotiation support
altogether, get the client-side version of those tests. We should have
had those anyway to test that the default is to allow it.
BUG=429450
Change-Id: I4a18f339b55f3f07d77e22e823141e10a12bc9ff
Reviewed-on: https://boringssl-review.googlesource.com/4780
Reviewed-by: Adam Langley <agl@google.com>
DH groups less than 1024 bits are clearly not very safe. Ideally servers
would switch to ECDHE because 1024 isn't great either, but this will
serve for the short term.
BUG=490240
Change-Id: Ic9aac714cdcdcbfae319b5eb1410675d3b903a69
Reviewed-on: https://boringssl-review.googlesource.com/4813
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
“ECDHE-PSK-WITH-AES-128-GCM-SHA256” doesn't follow the standard naming
for OpenSSL: it was “-WITH-” in it and has a hyphen between “AES” and
“128”. This change fixes that.
Change-Id: I7465b1ec83e7d5b9a60d8ca589808aeee10c174e
Reviewed-on: https://boringssl-review.googlesource.com/4601
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This will be reverted in a minute. The bots should run both suites of tests and
report the names of all failing tests in the summary.
Change-Id: Ibe351017dfa8ccfd182b3c88eee413cd2cbdeaf0
See upstream's bd891f098bdfcaa285c073ce556d0f5e27ec3a10. It honestly seems
kinda dumb for a client to do this, but apparently the spec allows this.
Judging by code inspection, OpenSSL 1.0.1 also allowed this, so this avoids a
behavior change when switching from 1.0.1 to BoringSSL.
Add a test for this, which revealed that, unlike upstream's version, this
actually works with ecdh_auto since tls1_get_shared_curve also needs updating.
(To be mentioned in newsletter.)
Change-Id: Ie622700f17835965457034393b90f346740cfca8
Reviewed-on: https://boringssl-review.googlesource.com/4464
Reviewed-by: Adam Langley <agl@google.com>
Because RFC 6066 is obnoxious like that and IIS servers actually do this
when OCSP-stapling is configured, but the OCSP server cannot be reached.
BUG=478947
Change-Id: I3d34c1497e0b6b02d706278dcea5ceb684ff60ae
Reviewed-on: https://boringssl-review.googlesource.com/4461
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I489d00bc4ee22a5ecad75dc1eb84776f044566e5
Reviewed-on: https://boringssl-review.googlesource.com/4391
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This causes any unexpected handshake records to be met with a fatal
no_renegotiation alert.
In addition, restore the redundant version sanity-checks in the handshake state
machines. Some code would zero the version field as a hacky way to break the
handshake on renego. Those will be removed when switching to this API.
The spec allows for a non-fatal no_renegotiation alert, but ssl3_read_bytes
makes it difficult to find the end of a ClientHello and skip it entirely. Given
that OpenSSL goes out of its way to map non-fatal no_renegotiation alerts to
fatal ones, this seems probably fine. This avoids needing to account for
another source of the library consuming an unbounded number of bytes without
returning data up.
Change-Id: Ie5050d9c9350c29cfe32d03a3c991bdc1da9e0e4
Reviewed-on: https://boringssl-review.googlesource.com/4300
Reviewed-by: Adam Langley <agl@google.com>
This drops in a copy of a subset of golang.org/x/crypto/poly1305 to implement
Poly1305. Hopefully this will keep them from regression as we rework the record
layer.
Change-Id: Ic1e0d941a0a9e5ec260151ced8acdf9215c4b887
Reviewed-on: https://boringssl-review.googlesource.com/4257
Reviewed-by: Adam Langley <agl@google.com>
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
This conceivably has a use, but NSS doesn't do this buffer either and it still
suffers from the same problems as the other uses of record_pqueue. This removes
the last use of record_pqueue. It also opens the door to removing pqueue
altogether as it isn't the right data structure for either of the remaining
uses either. (It's not clear it was right for record_pqueue either, but I don't
feel like digging into this code.)
Change-Id: If8a43e7332b3cd11a78a516f3e8ebf828052316f
Reviewed-on: https://boringssl-review.googlesource.com/4239
Reviewed-by: Adam Langley <agl@google.com>
If the key is missing, it seems the failure is assumed to be expected.
BUG=473924
Change-Id: I62edd9110fa74bee5e6425fd6786badf5398728c
Reviewed-on: https://boringssl-review.googlesource.com/4231
Reviewed-by: Adam Langley <agl@google.com>
Extend the False Start tests to optionally send an alert (thus avoiding
deadlock) before waiting for the out-of-order app data. Based on whether the
peer shuts off the connection before or after sending app data, we can
determine whether the peer False Started by observing purely external effects.
Change-Id: I8b9fecc29668e0b0c34b5fd19d0f239545011bae
Reviewed-on: https://boringssl-review.googlesource.com/4213
Reviewed-by: Adam Langley <agl@google.com>
Based on whether -false-start is passed, we expect SSL_CB_HANDSHAKE_DONE to or
not to fire. Also add a flag that asserts SSL_CB_HANDSHAKE_DONE does *not* fire
in any False Start test where the handshake fails after SSL_connect returns.
Change-Id: I6c5b960fff15e297531e15b16abe0b98be95bec8
Reviewed-on: https://boringssl-review.googlesource.com/4212
Reviewed-by: Adam Langley <agl@google.com>
That's a pretty obvious thing to test. I'm not sure how we forgot that one.
Change-Id: I7e1a7df6c6abbdd587e0f7723117f50d09faa5c4
Reviewed-on: https://boringssl-review.googlesource.com/4211
Reviewed-by: Adam Langley <agl@google.com>
Partly inspired by the new state exposed in
dc3da93899, stress this codepath by spamming our
poor shim with warning alerts.
Change-Id: I876c6e52911b6eb57493cf3e1782b37ea96d01f8
Reviewed-on: https://boringssl-review.googlesource.com/4112
Reviewed-by: Adam Langley <agl@google.com>
Both on the client and the server.
Change-Id: I9892c6dbbb29938154aba4f53b10e8b5231f9c47
Reviewed-on: https://boringssl-review.googlesource.com/4071
Reviewed-by: Adam Langley <agl@google.com>
This is really just scar tissue with https://crbug.com/468889 being the real
underlying problem. But the test is pretty easy.
Change-Id: I5eca18fdcbde8665c0e6c3ac419a28152647d66f
Reviewed-on: https://boringssl-review.googlesource.com/4052
Reviewed-by: Adam Langley <agl@google.com>
In verifying the fix for CVE-2015-0291, I noticed we don't actually have any
test coverage for full handshakes on renegotiation. All our tests always do
resumptions.
Change-Id: Ia9b701e8a50ba9353fefb8cc4fb86e78065d0b40
Reviewed-on: https://boringssl-review.googlesource.com/4050
Reviewed-by: Adam Langley <agl@google.com>
This callback receives information about the ClientHello and can decide
whether or not to allow the handshake to continue.
Change-Id: I21be28335fa74fedb5b73a310ee24310670fc923
Reviewed-on: https://boringssl-review.googlesource.com/3721
Reviewed-by: Adam Langley <agl@google.com>
This mostly[*] doesn't matter for TLS since the message would have been
rejected anyway, but, in DTLS, if the peer rejects our Finished, it will send
an encrypted alert. This will then cause it to hang, which isn't very helpful.
I've made the change on both TLS and DTLS so the two protocols don't diverge on
this point. It is true that we're accepting nominally encrypted and
authenticated alerts before Finished, but, prior to ChangeCipherSpec, the
alerts are sent in the clear anyway so an attacker could already inject alerts.
A consumer could only be sensitive to it being post-CCS if it was watching
msg_callback. The only non-debug consumer of msg_callback I've found anywhere
is some hostapd code to detect Heartbeat.
See https://code.google.com/p/webrtc/issues/detail?id=4403 for an instance
where the equivalent behavior in OpenSSL masks an alert.
[*] This does change behavior slightly if the peer sends a warning alert
between CCS and Finished. I believe this is benign as warning alerts are
usually ignored apart from info_callback and msg_callback. The one exception is
a close_notify which is a slightly new state (accepting close_notify during a
handshake seems questionable...), but they're processed pre-CCS too.
Change-Id: Idd0d49b9f9aa9d35374a9f5e2f815cdb931f5254
Reviewed-on: https://boringssl-review.googlesource.com/3883
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
We actually don't really care about this special-case since we only test client
full handshakes where the runner sends the second Finished not the shim
(otherwise the overlap logic and retransmitting on every fragment would
probably break us), but it should probably live next to the fragmentation
logic.
Change-Id: I54097d84ad8294bc6c42a84d6f22f496e63eb2a8
Reviewed-on: https://boringssl-review.googlesource.com/3763
Reviewed-by: Adam Langley <agl@google.com>
If the peer fragments Finished into multiple pieces, there is no need to
retransmit multiple times.
Change-Id: Ibf708ad079e1633afd420ff1c9be88a80020cba9
Reviewed-on: https://boringssl-review.googlesource.com/3762
Reviewed-by: Adam Langley <agl@google.com>
The old test just sent an empty ServerKeyExchange which is sufficient as we
reject the message early. But be more thorough and implement the actual
ephemeral key logic in the test server.
Change-Id: I016658762e4502c928c051e14d69eea67b5a495f
Reviewed-on: https://boringssl-review.googlesource.com/3650
Reviewed-by: Adam Langley <agl@google.com>
That might be a reasonable check to make, maybe.
DTLS handshake message reading has a ton of other bugs and needs a complete
rewrite. But let's fix this and get a test in now.
Change-Id: I4981fc302feb9125908bb6161ed1a18288c39e2b
Reviewed-on: https://boringssl-review.googlesource.com/3600
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
This involves more synchronization with child exits as the kernel no longer
closes the pre-created pipes for free, but it works on Windows. As long as
TCP_NODELAY is set, the performance seems comparable. Though it does involve
dealing with graceful socket shutdown. I couldn't get that to work on Windows
without draining the socket; not even SO_LINGER worked. Current (untested)
theory is that Windows refuses to gracefully shutdown a socket if the peer
sends data after we've stopped reading.
cmd.ExtraFiles doesn't work on Windows; it doesn't use fds natively, so you
can't pass fds 4 and 5. (stdin/stdout/stderr are special slots in
CreateProcess.) We can instead use the syscall module directly and mark handles
as inheritable (and then pass the numerical values out-of-band), but that
requires synchronizing all of our shim.Start() calls and assuming no other
thread is spawning a process.
PROC_THREAD_ATTRIBUTE_HANDLE_LIST fixes threading problems, but requires
wrapping more syscalls. exec.Cmd also doesn't let us launch the process
ourselves. Plus it still requires every handle in the list be marked
inheritable, so it doesn't help if some other thread is launching a process
with bInheritHandles TRUE but NOT using PROC_THREAD_ATTRIBUTE_HANDLE_LIST.
(Like Go, though we can take syscall.ForkLock there.)
http://blogs.msdn.com/b/oldnewthing/archive/2011/12/16/10248328.aspx
The more natively Windows option seems to be named pipes, but that too requires
wrapping more system calls. (To be fair, that isn't too painful.) They also
involve a listening server, so we'd still have to synchronize with shim.Wait()
a la net.TCPListener.
Then there's DuplicateHandle, but then we need an out-of-band signal.
All in all, one cross-platform implementation with a TCP sockets seems
simplest.
Change-Id: I38233e309a0fa6814baf61e806732138902347c0
Reviewed-on: https://boringssl-review.googlesource.com/3563
Reviewed-by: Adam Langley <agl@google.com>
Tighten up the requirements for False Start. At this point, neither
AES-CBC or RC4 are something that we want to use unless we're sure that
the server wants to speak them.
Rebase of original CL at: https://boringssl-review.googlesource.com/#/c/1980/
BUG=427721
Change-Id: I9ef7a596edeb8df1ed070aac67c315b94f3cc77f
Reviewed-on: https://boringssl-review.googlesource.com/3501
Reviewed-by: Adam Langley <agl@google.com>
Also adds a flag to runner.go to make it more suitable for printing to a pipe.
Change-Id: I26fae21f3e4910028f6b8bfc4821c8c595525504
Reviewed-on: https://boringssl-review.googlesource.com/3490
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
Found by running malloc tests with -valgrind. Unfortunately, the next one is
deep in crypto/asn1 itself, so I'm going to stop here for now.
Change-Id: I7a33971ee07c6b7b7a98715f2f18e0f29380c0a1
Reviewed-on: https://boringssl-review.googlesource.com/3350
Reviewed-by: Adam Langley <agl@google.com>
This is consistent with ignoring writeRecord failures. Without doing this, the
DTLS MinimumVersion test now flakily fails with:
FAILED (MinimumVersion-Client-TLS12-TLS1-DTLS)
bad error (wanted ':UNSUPPORTED_PROTOCOL:' / 'remote error: protocol version not supported'): local error 'write unix @: broken pipe', child error 'exit status 2', stdout:
2092242157:error:1007b1a7:SSL routines:ssl3_get_server_hello:UNSUPPORTED_PROTOCOL:../ssl/s3_clnt.c:783:
This is because the MinimumVersion tests assert on /both/ expectedError and
expectedLocalError. The latter is valuable as it asserts on the alert the peer
returned. (I would like us to add more such assertions to our tests where
appropriate.) However, after we send ServerHello, we also send a few messages
following it. This races with the peer shutdown and we sometimes get EPIPE
before reading the alert.
Change-Id: I3fe37940a6a531379673a00976035f8e76e0f825
Reviewed-on: https://boringssl-review.googlesource.com/3337
Reviewed-by: Adam Langley <agl@google.com>
It may take up to two iterations of s->handshake_func before it is safe to
continue. Fortunately, even if anything was using False Start this way
(Chromium doesn't), we don't inherit NSS's security bug. The "redundant" check
in the type match case later on in this function saves us.
Amusingly, the success case still worked before this fix. Even though we fall
through to the post-handshake codepath and get a handshake record while
"expecting" app data, the handshake state machine is still pumped thanks to a
codepath meant for renego!
Change-Id: Ie129d83ac1451ad4947c4f86380879db8a3fd924
Reviewed-on: https://boringssl-review.googlesource.com/3335
Reviewed-by: Adam Langley <agl@google.com>
The new V2ClientHello sniff asserts, for safety, that nothing else has
initialized the record layer before it runs. However, OpenSSL allows you to
avoid explicitly calling SSL_connect/SSL_accept and instead let
SSL_read/SSL_write implicitly handshake for you. This check happens at a fairly
low-level in the ssl3_read_bytes function, at which point the record layer has
already been initialized.
Add some tests to ensure this mode works.
(Later we'll lift the handshake check to a higher-level which is probably
simpler.)
Change-Id: Ibeb7fb78e5eb75af5411ba15799248d94f12820b
Reviewed-on: https://boringssl-review.googlesource.com/3334
Reviewed-by: Adam Langley <agl@google.com>
This works fine, but I believe NSS had a bug here a couple years ago. Also move
all the Skip* bug options next to each other in order.
Change-Id: I72dcb3babeee7ba73b3d7dc5ebef2e2298e37438
Reviewed-on: https://boringssl-review.googlesource.com/3333
Reviewed-by: Adam Langley <agl@google.com>
We have test coverage for invalid alerts, but not for normal ones on the DTLS
side.
Change-Id: I359dce8d4dc80dfa99b5d8bacd73f48a8e4ac310
Reviewed-on: https://boringssl-review.googlesource.com/3291
Reviewed-by: Adam Langley <agl@google.com>
The check on the DTLS side was broken anyway. On the TLS side, the spec does
say to ignore them, but there should be no need for this in future-proofing and
NSS doesn't appear to be lenient here. See also
https://boringssl-review.googlesource.com/#/c/3233/
Change-Id: I0846222936c5e08acdcfd9d6f854a99df767e468
Reviewed-on: https://boringssl-review.googlesource.com/3290
Reviewed-by: Adam Langley <agl@google.com>
SSL_AEAD_CTX ownership is currently too confusing. Instead, rely on the lack of
renego, so the previous epoch always uses the NULL cipher. (Were we to support
DTLS renego, we could keep track of s->d1->last_aead_write_ctx like
s->d1->last_write_sequence, but it isn't worth it.)
Buffered messages also tracked an old s->session, but this is unnecessary. The
s->session NULL check in tls1_enc dates to the OpenSSL initial commit and is
redundant with the aead NULL check.
Change-Id: I9a510468d95934c65bca4979094551c7536980ae
Reviewed-on: https://boringssl-review.googlesource.com/3234
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
For now, only test reorderings when we always or never fragment messages.
There's a third untested case: when full messages and fragments are mixed. That
will be tested later after making it actually work.
Change-Id: Ic4efb3f5e87b1319baf2d4af31eafa40f6a50fa6
Reviewed-on: https://boringssl-review.googlesource.com/3216
Reviewed-by: Adam Langley <agl@google.com>
No behavior change. This is in preparation for buffering a flight of handshake
messages to reorder vigorously on flush.
Change-Id: Ic348829b340bf58d28f332027646559cb11046ac
Reviewed-on: https://boringssl-review.googlesource.com/3215
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c67a3ae6ba. With a
deterministic clock, we can now go back to being strict about retransmits. Our
tests will now require that the shim only retransmit when we expect it to.
Change-Id: Iab1deb9665dcd294790c8253d920089e83a9140c
Reviewed-on: https://boringssl-review.googlesource.com/3211
Reviewed-by: Adam Langley <agl@google.com>
This is fatal for TLS but buffered in DTLS. The buffering isn't strictly
necessary (it would be just as valid to drop the record on the floor), but so
long as we want this behavior it should have a test.
Change-Id: I5846bb2fe80d78e25b6dfad51bcfcff2dc427c3f
Reviewed-on: https://boringssl-review.googlesource.com/3029
Reviewed-by: Adam Langley <agl@google.com>
This regressed in e95d20dcb8. EVP_AEAD will push
errors on the error queue (unlike the EVP_CIPHER codepath which checked
everything internally to ssl/ and didn't bother pushing anything). This meant
that a dropped packet would leave junk in the error queue.
Later, when SSL_read returns <= 0 (EOF or EWOULDBLOCK), the non-empty error
queue check in SSL_get_error kicks in and SSL_read looks to have failed.
BUG=https://code.google.com/p/webrtc/issues/detail?id=4214
Change-Id: I1e5e41c77a3e5b71e9eb0c72294abf0da677f840
Reviewed-on: https://boringssl-review.googlesource.com/2982
Reviewed-by: Adam Langley <agl@google.com>
BoringSSL currently retransmits non-deterministically on an internal timer
(rather than one supplied externally), so the tests currently fail flakily
depending on timing. Valgrind is a common source for this. We still assume an
in-order and reliable channel, but drop retransmits silently:
- Handshake messages may arrive with old sequence numbers.
- Retransmitted CCS records arrive from the previous epoch.
- We may receive a retransmitted Finished after we believe the handshake has
completed. (Aside: even in a real implementation, only Finished is possible
here. Even with out-of-order delivery, retransmitted or reordered messages
earlier in the handshake come in under a different epoch.)
Note that because DTLS renego and a Finished retransmit are ambiguous at the
record layer[*], this precludes us writing tests for DTLS renego. But DTLS
renego should get removed anyway. As BoringSSL currently implements renego,
this ambiguity is also a source of complexity in the real implementation. (See
the SSL3_MT_FINISHED check in dtls1_read_bytes.)
[*] As a further fun aside, it's also complex if dispatching renego vs Finished
after handshake message reassembly. The spec doesn't directly say the sequence
number is reset across renegos, but it says "The first message each side
transmits in /each/ handshake always has message_seq = 0". This means that such
an implementation needs the handshake message reassembly logic be aware that a
Finished fragment with high sequence number is NOT an out-of-order fragment for
the next handshake.
Change-Id: I35d13560f82bcb5eeda62f4de1571d28c818cc36
Reviewed-on: https://boringssl-review.googlesource.com/2770
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
The minimum MTU (not consistently enforced) is just under 256, so it's
difficult to test everything, but this is a basic test. (E.g., without renego,
the only handshake message with encryption is Finished which fits in the MTU.)
It tests the server side because the Certificate message is large enough to
require fragmentation.
Change-Id: Ida11f1057cebae2b800ad13696f98bb3a7fbbc5e
Reviewed-on: https://boringssl-review.googlesource.com/2824
Reviewed-by: Adam Langley <agl@google.com>
Add a dedicated error code to the queue for a handshake_failure alert in
response to ClientHello. This matches NSS's client behavior and gives a better
error on a (probable) failure to negotiate initial parameters.
BUG=https://crbug.com/446505
Change-Id: I34368712085a6cbf0031902daf2c00393783d96d
Reviewed-on: https://boringssl-review.googlesource.com/2751
Reviewed-by: Adam Langley <agl@google.com>
Ensure that both the client and the server emit a protocol_version alert
(except in SSLv3 where it doesn't exist) with a record-layer version which the
peer will recognize.
Change-Id: I31650a64fe9b027ff3d51e303711910a00b43d6f
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
These tests use both APIs. This also modifies the inline version negotiation's
error codes (currently only used for DTLS) to align with SSLv23's error codes.
Note: the peer should send a protocol_version alert which is currently untested
because it's broken.
Upstream would send such an alert if TLS 1.0 was supported but not otherwise,
which is somewhat bizarre. We've actually regressed and never send the alert in
SSLv23. When version negotiation is unified, we'll get the alerts back.
Change-Id: I4c77bcef3a3cd54a039a642f189785cd34387410
Reviewed-on: https://boringssl-review.googlesource.com/2584
Reviewed-by: Adam Langley <agl@google.com>
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
else block got lost in a rewrite of this code.
Change-Id: I51f1655474ec8bbd4eccb4297124e8584329444e
Reviewed-on: https://boringssl-review.googlesource.com/2560
Reviewed-by: Adam Langley <agl@google.com>
The client_version needs to be preserved, both for the RSA key exchange and
(when this codepath is used for TLS) for the SChannel renego workaround. Fix
the tests to enforce this so the cipher suite version tests catch this.
Change-Id: I0c42dc3ec4830f3724026b400e5066e7a7f1ee97
Reviewed-on: https://boringssl-review.googlesource.com/2551
Reviewed-by: Adam Langley <agl@google.com>
The record-layer version of the ServerHello should match the final version. The
record-layer version of the ClientHello should be the advertised version, but
clamped at TLS 1.0. This is to ensure future rewrites do not regress this.
Change-Id: I96f1f0674944997ff38b562453a322ce61652635
Reviewed-on: https://boringssl-review.googlesource.com/2540
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
The comment has it right, but the rewritten code was wrong.
Change-Id: I450193c39fb62eae32aae090a3834dd83db53421
Reviewed-on: https://boringssl-review.googlesource.com/2444
Reviewed-by: Adam Langley <agl@google.com>
Replace the comment with a clearer one and reimplement it much more tidily. The
mask thing was more complicated than was needed.
This slightly changes behavior on the DTLS_ANY_VERSION side in that, if only
one method is enabled, we no longer short-circuit to the version-locked method
early. This "optimization" seems unnecessary.
Change-Id: I571c8b60ed16bd4357c67d65df0dd1ef9cc5eb57
Reviewed-on: https://boringssl-review.googlesource.com/2451
Reviewed-by: Adam Langley <agl@google.com>
This fixes bugs that kept the tests from working:
- Resolve DTLS version and cookie before the session.
- In DTLS_ANY_VERSION, ServerHello should be read with first_packet = 1. This
is a regression from f2fedefdca. We'll want to
do the same for TLS, but first let's change this to a boolean has_version in a
follow-up.
Things not yet fixed:
- DTLS code is not EVP_AEAD-aware. Those ciphers are disabled for now.
- On the client, DTLS_ANY_VERSION creates SSL_SESSIONs with the wrong
ssl_version. The tests pass because we no longer enforce the match as of
e37216f56009fbf48c3a1e733b7a546ca6dfc2af. (In fact, we've gone from the server
ignoring ssl_version and client enforcing to the client mostly ignoring
ssl_version and the server enforcing.)
- ssl3_send_client_hello's ssl_version check checks for equality against
s->version rather than >.
Change-Id: I5a0dde221b2009413df9b9443882b9bf3b29519c
Reviewed-on: https://boringssl-review.googlesource.com/2403
Reviewed-by: Adam Langley <agl@google.com>
We forgot to add those when we implemented the features. (Also relevant because
they will provide test coverage later for configuring features when using the
generic method tables rather than *_client_method.)
Change-Id: Ie08b27de893095e01a05a7084775676616459807
Reviewed-on: https://boringssl-review.googlesource.com/2410
Reviewed-by: Adam Langley <agl@google.com>
This implements session IDs in client and server in runner.go.
Change-Id: I26655f996b7b44c7eb56340ef6a415d3f2ac3503
Reviewed-on: https://boringssl-review.googlesource.com/2350
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
Just the negotiation portion as everything else is external. This feature is
used in WebRTC.
Change-Id: Iccc3983ea99e7d054b59010182f9a56a8099e116
Reviewed-on: https://boringssl-review.googlesource.com/2310
Reviewed-by: Adam Langley <agl@google.com>
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
All of NSS, upstream OpenSSL, SChannel, and Secure Transport require, on the
client, that the ServerHello version match the session's version on resumption.
OpenSSL's current behavior is incompatible with all of these. Fall back to a
full handshake on the server instead of mismatch.
Add a comment on the client for why we are, as of
30ddb434bf, not currently enforcing the same in
the client.
Change-Id: I60aec972d81368c4ec30e2fd515dabd69401d175
Reviewed-on: https://boringssl-review.googlesource.com/2244
Reviewed-by: Adam Langley <agl@google.com>
Clients all consistently reject mismatches. If a different version was
negotiated, a server should ignore the resumption. This doesn't actually affect
current tests. We really want to be making this change in BoringSSL (and then
upstream), but get the Go half into shape first.
Change-Id: Ieee7e141331d9e08573592e661889bd756dccfa9
Reviewed-on: https://boringssl-review.googlesource.com/2243
Reviewed-by: Adam Langley <agl@google.com>
These'll get removed once most of renego support is gone, but this is to prove
removing the warning alert from the previous commit still prevents legacy
renegotiations.
Change-Id: I7d9d95e1d4c5d23d3b6d170938a5499a65f2d5ea
Reviewed-on: https://boringssl-review.googlesource.com/2236
Reviewed-by: Adam Langley <agl@google.com>
Ensure that the client rejects it with UNEXPECTED_MESSAGE, not by attempting to
decode it.
Change-Id: Ifc5613cf1152e0f7dcbee73e05df1ef367dfbfd5
Reviewed-on: https://boringssl-review.googlesource.com/2232
Reviewed-by: Adam Langley <agl@google.com>
At the record layer, DTLS maintains a window of seen sequence numbers to detect
replays. Add tests to cover that case. Test both repeated sequence numbers
within the window and sequence numbers past the window's left edge. Also test
receiving sequence numbers far past the window's right edge.
Change-Id: If6a7a24869db37fdd8fb3c4b3521b730e31f8f86
Reviewed-on: https://boringssl-review.googlesource.com/2221
Reviewed-by: Adam Langley <agl@google.com>
This change adds support to the Go code for renegotiation as a client,
meaning that we can test BoringSSL's renegotiation as a server.
Change-Id: Iaa9fb1a6022c51023bce36c47d4ef7abee74344b
Reviewed-on: https://boringssl-review.googlesource.com/2082
Reviewed-by: Adam Langley <agl@google.com>
pskKeyAgreement is now a wrapper over a base key agreement.
Change-Id: Ic18862d3e98f7513476f878b8df5dcd8d36a0eac
Reviewed-on: https://boringssl-review.googlesource.com/2053
Reviewed-by: Adam Langley <agl@google.com>
Only the three plain PSK suites for now. ECDHE_PSK_WITH_AES_128_GCM_SHA256 will
be in a follow-up.
Change-Id: Iafc116a5b2798c61d90c139b461cf98897ae23b3
Reviewed-on: https://boringssl-review.googlesource.com/2051
Reviewed-by: Adam Langley <agl@google.com>
Both as client and as server. Also tests that ALPN causes False Start to kick
in.
Change-Id: Ib570346f3c511834152cd2df2ef29541946d3ab4
Reviewed-on: https://boringssl-review.googlesource.com/1753
Reviewed-by: Adam Langley <agl@google.com>
Otherwise the child is busy waiting for its second handshake.
Change-Id: Ic613eeb04c5d6c1ec1e1bbcb13946d3ac31d05f1
Reviewed-on: https://boringssl-review.googlesource.com/1752
Reviewed-by: Adam Langley <agl@google.com>
Notably, this would have caught ed8270a55c
(although, apart from staring at code coverage, knowing to set resumeSession on
the server test isn't exactly obvious). Perhaps we should systematically set it
on all extension server tests; ClientHello extension parsing happens after
resumption has been determined and is often sensitive to it.
Change-Id: Ie83f294a26881a6a41969e9dbd102d0a93cb68b5
Reviewed-on: https://boringssl-review.googlesource.com/1750
Reviewed-by: Adam Langley <agl@google.com>
These were added in TLS 1.2. They are like the standard AES-CBC cipher suites,
but use different HMACs.
Change-Id: Ib89ddebd1aa398b1347f8285f5d827068b1bd181
Reviewed-on: https://boringssl-review.googlesource.com/1730
Reviewed-by: Adam Langley <agl@google.com>
This check got refactored in OpenSSL 1.0.2 and broke in the process. Fix this
and add a test. Otherwise things like client auth can get slightly confused; it
will try to sign the MD5/SHA-1 hash, but the TLS 1.2 cipher suite may not use
SSL_HANDSHAKE_MAC_DEFAULT, so those digests won't be available.
Based on upstream's 226751ae4a1f3e00021c43399d7bb51a99c22c17.
Change-Id: I5b864d3a696f3187b849c53b872c24fb7df27924
Reviewed-on: https://boringssl-review.googlesource.com/1696
Reviewed-by: Adam Langley <agl@google.com>
If this is part of SSL_OP_ALL, we should have a test for it.
Change-Id: Ia72422beb2da6434726e78e174f3416f90f7c897
Reviewed-on: https://boringssl-review.googlesource.com/1695
Reviewed-by: Adam Langley <agl@google.com>
Maintain a handshake buffer in prf.go to implement TLS 1.2 client auth. Also
use it for SSL 3. This isn't strictly necessary as we know the hash functions,
but Go's hash.Hash interface lacks a Copy method.
Also fix the server-side tests which failed to test every TLS version.
Change-Id: I98492c334fbb9f2f0f89ee9c5c8345cafc025600
Reviewed-on: https://boringssl-review.googlesource.com/1664
Reviewed-by: Adam Langley <agl@google.com>
We may wish to pass data to the runner that contains NULs.
Change-Id: Id78dad0ad0b5b6d0537481c818e3febdf1740cc9
Reviewed-on: https://boringssl-review.googlesource.com/1603
Reviewed-by: Adam Langley <agl@google.com>
To align with what Chrome sends on NSS, remove all 3DES cipher suites except
RSA_WITH_3DES_EDE_CBC_SHA. This avoids having to order a PFS 3DES cipher
against a non-PFS 3DES cipher.
Remove the strength sort which wanted place AES_256_CBC ahead of AES_128_GCM
and is not especially useful (everything under 128 is either 3DES or DES).
Instead, explicitly order all the bulk ciphers. Continue to prefer PFS over
non-PFS and ECDHE over DHE.
This gives the following order in Chromium. We can probably prune it a bit
(DHE_DSS, DH_*) in a follow-up.
TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 (0xcc14) Forward Secrecy 256
TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 (0xcc13) Forward Secrecy 256
TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 (0xcc15) Forward Secrecy 256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 (0xc02f) Forward Secrecy 128
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 (0xc02b) Forward Secrecy 128
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 (0xa2) Forward Secrecy* 128
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 (0x9e) Forward Secrecy 128
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA (0xc014) Forward Secrecy 256
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA (0xc00a) Forward Secrecy 256
TLS_DHE_RSA_WITH_AES_256_CBC_SHA (0x39) Forward Secrecy 256
TLS_DHE_DSS_WITH_AES_256_CBC_SHA (0x38) Forward Secrecy* 256
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA (0xc013) Forward Secrecy 128
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA (0xc009) Forward Secrecy 128
TLS_DHE_RSA_WITH_AES_128_CBC_SHA (0x33) Forward Secrecy 128
TLS_DHE_DSS_WITH_AES_128_CBC_SHA (0x32) Forward Secrecy* 128
TLS_ECDHE_RSA_WITH_RC4_128_SHA (0xc011) Forward Secrecy 128
TLS_ECDHE_ECDSA_WITH_RC4_128_SHA (0xc007) Forward Secrecy 128
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 (0xa4) 128
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 (0xa0) 128
TLS_RSA_WITH_AES_128_GCM_SHA256 (0x9c) 128
TLS_DH_RSA_WITH_AES_256_CBC_SHA (0x37) 256
TLS_DH_DSS_WITH_AES_256_CBC_SHA (0x36) 256
TLS_RSA_WITH_AES_256_CBC_SHA (0x35) 256
TLS_DH_RSA_WITH_AES_128_CBC_SHA (0x31) 128
TLS_DH_DSS_WITH_AES_128_CBC_SHA (0x30) 128
TLS_RSA_WITH_AES_128_CBC_SHA (0x2f) 128
TLS_RSA_WITH_RC4_128_SHA (0x5) 128
TLS_RSA_WITH_RC4_128_MD5 (0x4) 128
TLS_RSA_WITH_3DES_EDE_CBC_SHA (0xa) 112
BUG=405091
Change-Id: Ib8dd28469414a4eb496788a57a215e7e21f8c37f
Reviewed-on: https://boringssl-review.googlesource.com/1559
Reviewed-by: Adam Langley <agl@google.com>
RFC 6347 changed the meaning of server_version in HelloVerifyRequest. It should
now always be 1.0 with version negotiation not happening until ServerHello. Fix
runner.go logic and remove #if-0'd code in dtls1_get_hello_verify.
Enforce this in the runner for when we get DTLS 1.2 tests.
Change-Id: Ice83628798a231df6bf268f66b4c47b14a519386
Reviewed-on: https://boringssl-review.googlesource.com/1552
Reviewed-by: Adam Langley <agl@google.com>
Rather than switching the order of the ServerHello and HelloVerifyRequest
states and processing each twice, have the states follow the protocol order.
HelloVerifyRequest reading is optional and ServerHello is strict. Use the
send_cookie bit to determine whether we're expecting a cookie or not.
Fix the dtls1_stop_timer call in these states to consistently hit the end of a
server flight; the previous flight should not be cleared from the retransmit
buffer until the entire next flight is received. That said, OpenSSL doesn't
appear to implement the part where, on receipt of the previous peer flight, the
buffered flight is retransmitted. (With the exception of a SSL3_MT_FINISHED
special-case in dtls1_read_bytes.) So if the peer is also OpenSSL, this doesn't
do anything.
Also fix the DTLS test which wasn't actually asserting that the ClientHello
matched.
Change-Id: Ia542190972dbffabb837d32c9d453a243caa90b2
Reviewed-on: https://boringssl-review.googlesource.com/1551
Reviewed-by: Adam Langley <agl@google.com>
The missing SSL 3.0 client support in runner.go was fairly minor.
Change-Id: Ibbd440c9b6be99be08a214dec6b93ca358d8cf0a
Reviewed-on: https://boringssl-review.googlesource.com/1516
Reviewed-by: Adam Langley <agl@google.com>
This removes some duplicate code in parsing command-line flags and, more
importantly, makes configuration available when constructing the SSL_CTX and
avoids a number of globals.
Change-Id: I26e2d2285b732f855a2c82752bc8e0db480c3b30
Reviewed-on: https://boringssl-review.googlesource.com/1502
Reviewed-by: Adam Langley <agl@google.com>
Run against openssl s_client and openssl s_server. This seems to work for a
start, although it may need to become cleverer to stress more of BoringSSL's
implementation for test purposes.
In particular, it assumes a reliable, in-order channel. And it requires that
the peer send handshake fragments in order. Retransmit and whatnot are not
implemented. The peer under test will be expected to handle a lossy channel,
but all loss in the channel will be controlled. MAC errors, etc., are fatal.
Change-Id: I329233cfb0994938fd012667ddf7c6a791ac7164
Reviewed-on: https://boringssl-review.googlesource.com/1390
Reviewed-by: Adam Langley <agl@google.com>
ssl23_get_client_hello has lots of remnants of SSLv2 support and remnants of an
even older SSL_OP_NON_EXPORT_FIRST option (see upstream's
d92f0bb6e9ed94ac0c3aa0c939f2565f2ed95935) which complicates the logic.
Split it into three states and move V2ClientHello parsing into its own
function. Port it to CBS and CBB to give bounds checks on the V2ClientHello
parse.
This fixes a minor bug where, if the SSL_accept call in ssl23_get_client_hello
failed, cb would not be NULL'd and SSL_CB_ACCEPT_LOOP would get reported an
extra time.
It also unbreaks the invariant between s->packet, s->packet_length,
s->s3->rbuf.buf, and s->s3->rbuf.offset at the point the switch, although this
was of no consequence because the first ssl3_read_n call passes extend = 0
which resets s->packet and s->packet_length.
It also makes us tolerant to major version bumps in the ClientHello. Add tests
for TLS tolerance of both minor and major version bumps as well as the HTTP
request error codes.
Change-Id: I948337f4dc483f4ebe1742d3eba53b045b260257
Reviewed-on: https://boringssl-review.googlesource.com/1455
Reviewed-by: Adam Langley <agl@google.com>
It's a different handshake flow with more state machine coverage. We should
make sure to test the asynchronous version.
Change-Id: I0bb79ca7e6a86bd3cac66bac1f795a885d474909
Reviewed-on: https://boringssl-review.googlesource.com/1454
Reviewed-by: Adam Langley <agl@google.com>
Didn't have coverage for abbreviated handshakes with NewSessionTicket. Also add
some missing resumeSession flags so the tests match the comments.
Change-Id: Ie4d76e8764561f3f1f31e1aa9595324affce0db8
Reviewed-on: https://boringssl-review.googlesource.com/1453
Reviewed-by: Adam Langley <agl@google.com>
Also change MaxHandshakeRecordLength to 1 in the handshake coverage tests to
better stress the state machine.
Change-Id: I27fce2c000b3d4818fd2e9a47fb09d3f646dd1bd
Reviewed-on: https://boringssl-review.googlesource.com/1452
Reviewed-by: Adam Langley <agl@google.com>
Test all pairs of client and server version, except for the ones that require
SSLv3 client support in runner.go. That is, as yet, still missing.
Change-Id: I601ab49c5526cd2eb4f85d5d535570e32f218d5b
Reviewed-on: https://boringssl-review.googlesource.com/1450
Reviewed-by: Adam Langley <agl@google.com>
It's not part of SSL_OP_ALL and is unused, so remove it. Add a test that
asserts the version check works.
Change-Id: I917516594ec5a4998a8316782f035697c33d99b0
Reviewed-on: https://boringssl-review.googlesource.com/1418
Reviewed-by: Adam Langley <agl@google.com>
When the write size was exactly SSL3_RT_MAX_PLAIN_LENGTH+1 and record
splitting is needed, an extra byte would be added to the max size of the
message to be written. This would cause the requested size to not exceed
the max. If the SSL_WANT_WRITE error were returned, the next packet
would not get the extra byte added to the max packet size since
record_split_done is set. Since a different set of arguments
(SSL3_RT_MAX_PLAIN_LENGTH+1 vs SSL3_RT_MAX_PLAIN_LENGTH) would be passed
to do_ssl3_write, it would return an "SSL3_WRITE_PENDING:bad write
retry" error.
To avoid a failure in the opposite direction, the max variable increment
is removed as well. This can happen when SSL_MODE_ENABLE_PARTIAL_WRITE
is not enabled and the call to ssl3_write_bytes contains, e.g., a buffer
of 2*SSL3_RT_MAX_PLAIN_LENGTH, where the first call into do_ssl3_write
succeeds writing the first SSL3_RT_MAX_PLAIN_LENGTH bytes, but writing
the second SSL3_RT_MAX_PLAIN_LENGTH bytes fails. This means the first
time the the second section of SSL3_RT_MAX_PLAIN_LENGTH bytes has called
do_ssl3_write with "max" bytes, but next call to ssl3_write_bytes in
turn calls into do_ssl3_write with "max+1" bytes.
Change-Id: Icf8453195c1145a54d31b8e8146801118207df03
Reviewed-on: https://boringssl-review.googlesource.com/1420
Reviewed-by: Kenny Root <kroot@google.com>
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add a framework for testing the asynchronous codepath. Move some handshake
state machine coverage tests to cover a range of record-layer and
handshake-layer asynchronicity.
This adds tests for the previous two async bugs fixed.
Change-Id: I422ef33ba3eeb0ad04766871ed8bc59b677b169e
Reviewed-on: https://boringssl-review.googlesource.com/1410
Reviewed-by: Adam Langley <agl@google.com>
Use it to test DHE-RSA in BoringSSL.
Change-Id: I88f7bfa76507a6f60234d61d494c9f94b7df4e0a
Reviewed-on: https://boringssl-review.googlesource.com/1377
Reviewed-by: Adam Langley <agl@google.com>
Default to the number of CPUs. Avoids the tests launching 64 valgrinds in
parallel on machines without gobs of memory.
Change-Id: I9eeb365b48aa7407e303d161f90ce69a591a884c
Reviewed-on: https://boringssl-review.googlesource.com/1375
Reviewed-by: Adam Langley <agl@google.com>
Assert that inappropriate fallbacks are detected, but if the client_version
matches the server's highest version, do not abort the handshake.
Change-Id: I9d72570bce45e1eb23fc2b74a3c5fca10562e573
Reviewed-on: https://boringssl-review.googlesource.com/1373
Reviewed-by: Adam Langley <agl@google.com>
Should have test coverage there as long as we care about supporting it.
Change-Id: Ic67539228b550f2ebd0b543d5a58640913b0474b
Reviewed-on: https://boringssl-review.googlesource.com/1371
Reviewed-by: Adam Langley <agl@google.com>
One of the state transitions wasn't rewritten to CR_CHANGE. Add a test to
exercise this codepath. Also SSL_cutthrough_complete references the state.
Change-Id: Ib2f7ac5ac3f0348864efa93cf13cfd87454572f0
Reviewed-on: https://boringssl-review.googlesource.com/1337
Reviewed-by: Adam Langley <agl@google.com>
Now that the flag is set accurately, use it to enforce that the handshake and
CCS synchronization. If EXPECT_CCS is set, enforce that:
(a) No handshake records may be received before ChangeCipherSpec.
(b) There is no pending handshake data at the point EXPECT_CCS is set.
Change-Id: I04b228fe6a7a771cf6600b7d38aa762b2d553f08
Reviewed-on: https://boringssl-review.googlesource.com/1299
Reviewed-by: Adam Langley <agl@google.com>
Test both when the peer doesn't support session tickets and when the server
promises a NewSessionTicket message but doesn't deliver.
Change-Id: I48f338094002beac2e6b80e41851c72822b3b9d5
Reviewed-on: https://boringssl-review.googlesource.com/1300
Reviewed-by: Adam Langley <agl@google.com>
The shim is now passed two file descriptors. In a session resumption test, the
second is used in an abbreviated handshake immediately after the first.
Change-Id: I1f348c05f1a8ff2881fb46fc9e869696f74071c6
Reviewed-on: https://boringssl-review.googlesource.com/1291
Reviewed-by: Adam Langley <agl@google.com>
Some test code to insert a bogus session ticket was retained. Also,
decryptTicket mutated its input, in turn, mutating the ClientHello,
breaking the Finished hash.
The latter fix should probably be merged upstream.
Change-Id: I6949f842c67e19df8742561fb0b849af9f5f099d
Reviewed-on: https://boringssl-review.googlesource.com/1290
Reviewed-by: Adam Langley <agl@google.com>
Finished isn't always the first post-CCS message.
Change-Id: I4f70eeed57cf732693d07212b096efb2594c5b3c
Reviewed-on: https://boringssl-review.googlesource.com/1288
Reviewed-by: Adam Langley <agl@google.com>
This change can probably be ported over to upstream crypto/tls. The current Go
TLS implementation ignores the signature and hash algorithm lists in
CertificateVerify and CertificateRequest. Take these into account so that our
tests assert OpenSSL fills them out correctly.
Also fix a bug in the original code where 'err' within the switch block get
shadowed.
Change-Id: I5d9c0b31ebb4662ecc767ed885a20707f0e86216
Reviewed-on: https://boringssl-review.googlesource.com/1253
Reviewed-by: Adam Langley <agl@google.com>
They pass, but this is an error case that is probably worth a test.
Change-Id: I37b2eec34a1781fa8342eea57ee4f9da81ce17ed
Reviewed-on: https://boringssl-review.googlesource.com/1257
Reviewed-by: Adam Langley <agl@google.com>
Got one of the conditions flipped.
Change-Id: I327a9c13e42865459e8d69a431b0d3a2bc6b54a5
Reviewed-on: https://boringssl-review.googlesource.com/1210
Reviewed-by: Adam Langley <agl@google.com>
Missing ServerKeyExchange is handled, but only because it hits an
ERR_R_INTERNAL_ERROR in ssl3_send_client_key_exchange in trying to find the
server ECDH parameters. Be strict about requiring it for ECDHE.
Change-Id: Ifce5b73c8bd14746b8a2185f479d550e9e3f84df
Reviewed-on: https://boringssl-review.googlesource.com/1157
Reviewed-by: Adam Langley <agl@google.com>
