They were removed in the initial fork, but the ctrl macros remained.
BUG=404754
Change-Id: I5b20434faf494c54974a8d9a9df0e87ccf33c414
Reviewed-on: https://boringssl-review.googlesource.com/5670
Reviewed-by: Adam Langley <agl@google.com>
It's not clear why OpenSSL had a union. The comment says something about sizes
of long, since OpenSSL doesn't use stdint.h. But the variable is treated as a
bunch of uint32_t's, not DES_cblocks.
The key schedule is also always used by iterating or indexing into a uint32_t*,
treating the 16 2-word subkeys as a single uint32_t[32]. Instead, index into
them properly shush any picky tools. The compiler should be able to figure out
what's going on and optimize it appropriately.
BUG=517495
Change-Id: I83d0e63ac2c6fb76fac1dceda9f2fd6762074341
Reviewed-on: https://boringssl-review.googlesource.com/5627
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
A memory BIO is internally a BUF_MEM anyway. There's no need to bring
BIO_write into the mix. BUF_MEM is size_t clean.
Change-Id: I4ec6e4d22c72696bf47c95861771013483f75cab
Reviewed-on: https://boringssl-review.googlesource.com/5616
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
We never need to define the actual structs because we always cast them
before use. The types only exist to be distinct, and they can do that
without a definition.
Change-Id: I1e1ca0833b383f3be422675cb7b90dacbaf82acf
Reviewed-on: https://boringssl-review.googlesource.com/5593
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add it to |EVP_get_cipherbynid|, along with |EVP_rc2_40_cbc| and
|EVP_aes_192_cbc|.
Change-Id: Iee7621a91262359d1650684652995884a6cef37a
Reviewed-on: https://boringssl-review.googlesource.com/5590
Reviewed-by: Adam Langley <agl@google.com>
The split was only needed for buffering records. Likewise, the extra
seq_num field is now unnecessary.
This also fixes a bug where dtls1_process_record will push an error on
the queue if the decrypted record is too large, which dtls1_get_record
will ignore but fail to clear, leaving garbage on the error queue. The
error is now treated as fatal; the reason DTLS silently drops invalid
packets is worrying about ease of DoS, but after SSL_AEAD_CTX_open, the
packet has been authenticated. (Unless it's the null cipher, but that's
during the handshake and the handshake is already DoS-able by breaking
handshake reassembly state.)
The function is still rather a mess. Later changes will clean this up.
BUG=468889
Change-Id: I96a54afe0755d43c34456f76e77fc4ee52ad01e3
Reviewed-on: https://boringssl-review.googlesource.com/5557
Reviewed-by: Adam Langley <agl@google.com>
It will end up allowing some misuses of the error API to break silently,
so we're better off without it.
This reverts commit 0fba870578.
Change-Id: I486962c77cb18474ad9eee2acec86b631c99210d
16f774f8bf adds forward declarations for
everything in x509.h, but the typedefs are still in x509.h. Some versions of
clang flag the duplicate typedefs in C code.
Change-Id: Ib6684a238681d8c4fb1f0f91c3a6110013b3f4d6
Reviewed-on: https://boringssl-review.googlesource.com/5580
Reviewed-by: Adam Langley <agl@google.com>
(This is one of the most common errors that callers test for.)
Change-Id: Ic39b8dc6b5551de4a25e8517b9bbedf8a4a94d60
Reviewed-on: https://boringssl-review.googlesource.com/5534
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
MSVC and clang-cl automatically define |_WIN32| but |WIN32| is only
defined if a Windows header file has been included or if -DWIN32 was
passed on the command line. Thus, it is always better to test |_WIN32|
than |WIN32|. The convention in BoringSSL is to test |OPENSSL_WINDOWS|
instead, except for the place where |OPENSSL_WINDOWS| is defined.
Change-Id: Icf3e03958895be32efe800e689d5ed6a2fed215f
Reviewed-on: https://boringssl-review.googlesource.com/5553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called anywhere and doesn't return anything interesting.
Change-Id: I68e7e9cd7b74a72f61092ac5d2b5d2390e55a228
Reviewed-on: https://boringssl-review.googlesource.com/5540
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
These are not in upstream and were probably introduced on accident by stray vim
keystrokes.
Change-Id: I35f51f81fc37e75702e7d8ffc6f040ce71321b54
Reviewed-on: https://boringssl-review.googlesource.com/5490
Reviewed-by: Adam Langley <agl@google.com>
This means e.g. that a caller can say:
RAND_SSLEay()->bytes(...)
and so on. But in exchange for this convenience, I've changed the
signatures to be more BoringSSL-ish (|size_t| instead of |int|).
That's fine; |RAND_set_rand_method(SSLEay())| still works. And by
works I mean "does nothing".
Change-Id: I35479b5efb759da910ce46e22298168b78c9edcf
Reviewed-on: https://boringssl-review.googlesource.com/5472
Reviewed-by: Adam Langley <agl@google.com>
No functional changes but it saves diff noise in other changes in the
future.
Change-Id: Ib8bf43f1d108f6accdc2523db6d0edc5be77ba55
Reviewed-on: https://boringssl-review.googlesource.com/5468
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
It's not DER and always parses the entire thing.
Change-Id: Idb4b8b93d5bc3689d8c3ea34c38b529e50a4af61
Reviewed-on: https://boringssl-review.googlesource.com/5451
Reviewed-by: Adam Langley <agl@google.com>
Rather, take a leaf out of Chromium's book and use MSVC's __cpuid and
_xgetbv built-in, with an inline assembly emulated version for other
compilers.
This preserves the behavior of the original assembly with the following
differences:
- CPUs without cpuid aren't support. Chromium's base/cpu.cc doesn't
check, and SSE2 support is part of our baseline; the perlasm code
is always built with OPENSSL_IA32_SSE2.
- The clear_xmm block in cpu-x86-asm.pl is removed. This was used to
clear some XMM-using features if OSXSAVE was set but XCR0 reports the
OS doesn't use XSAVE to store SSE state. This wasn't present in the
x86_64 and seems wrong. Section 13.5.2 of the Intel manual, volume 1,
explicitly says SSE may still be used in this case; the OS may save
that state in FXSAVE instead. A side discussion on upstream's RT#2633
agrees.
- The old code ran some AMD CPUs through the "intel" codepath and some
went straight to "generic" after duplicating some, but not all, logic.
The AMD copy didn't clear some reserved bits and didn't query CPUID 7
for AVX2 support. This is moot since AMD CPUs today don't support
AVX2, but it seems they're expected to in the future?
- Setting bit 10 is dropped. This doesn't appear to be queried anywhere,
was 32-bit only, and seems a remnant of upstream's
14e21f863a3e3278bb8660ea9844e92e52e1f2f7.
Change-Id: I0548877c97e997f7beb25e15f3fea71c68a951d2
Reviewed-on: https://boringssl-review.googlesource.com/5434
Reviewed-by: Adam Langley <agl@google.com>
Some other reserved bits are repurposed. Also explicitly mention that
bit 20 is zero (formerly RC4_CHAR), so it's not accidentally repurposed
later.
Change-Id: Idc4b32efe089ae7b7295472c4488f75258b7f962
Reviewed-on: https://boringssl-review.googlesource.com/5432
Reviewed-by: Adam Langley <agl@google.com>
Consumers sometimes use ERR_LIB_USER + <favorite number> instead of
ERR_get_next_error_library. To avoid causing them grief, keep ERR_LIB_USER
last.
Change-Id: Id19ae7836c41d5b156044bd20d417daf643bdda2
Reviewed-on: https://boringssl-review.googlesource.com/5290
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
poly1305.h was missing exports. While here, chacha.h should also be exported.
Change-Id: I5da9c953d3e5a5ef76a3e96bc4794192abee3ae6
Reviewed-on: https://boringssl-review.googlesource.com/5420
Reviewed-by: Adam Langley <agl@google.com>
RFC 7359 includes tests for various edge cases. Also, as
CRYPTO_poly1305_update can be used single-shot and streaming, we should
explicitly stress both.
Change-Id: Ie44c203a77624be10397ad05f06ca98d937db76f
Reviewed-on: https://boringssl-review.googlesource.com/5410
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
This is the first structure to be implemented with the new BIGNUM ASN.1
routines. Object reuse in the legacy d2i/i2d functions is implemented by
releasing whatever was in *out before and setting it to the
newly-allocated object. As with the new d2i_SSL_SESSION, this is a
weaker form of object reuse, but should suffice for reasonable callers.
As ECDSA_SIG is more likely to be parsed alone than as part of another
structure (and using CBB is slightly tedious), add convenient functions
which take byte arrays. For consistency with SSL_SESSION, they are named
to/from_bytes. from_bytes, unlike the CBS variant, rejects trailing
data.
Note this changes some test expectations: BER signatures now push an
error code. That they didn't do this was probably a mistake.
BUG=499653
Change-Id: I9ec74db53e70d9a989412cc9e2b599be0454caec
Reviewed-on: https://boringssl-review.googlesource.com/5269
Reviewed-by: Adam Langley <agl@google.com>
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
