Removes a bit of unused code. This effectively reverts upstream's
25af7a5dbc05c7359d1d7f472d50d65a9d876b7e. It's new with OpenSSL 1.0.2 so
nothing can be using it yet. We can restore it with tests if we end up wanting
it later.
(Also I think it might be misnamed. The KDF seems to be defined in X9.63, not
X9.62.)
Change-Id: I482daf681e0cf5c3bbdc72c57793f91448deaee8
Reviewed-on: https://boringssl-review.googlesource.com/2846
Reviewed-by: Adam Langley <agl@google.com>
The use in s3_srvr.c doesn't care (it doesn't even have to be in bounds), but
it's good to have the value be initialized and not a function of the input.
(The old uninitialized case wasn't hit in s3_srvr.c because of the earlier
bounds check.)
Change-Id: Ib6b418b3c140aa564f8a46da3d34bb2b69f06195
Reviewed-on: https://boringssl-review.googlesource.com/2845
Reviewed-by: Adam Langley <agl@google.com>
The under 32 constraint is silly; it's to check for duplicate curves in
library-supplied configuration. That API is new as of 1.0.2. It doesn't seem
worth bothering; if the caller supplies a repeated value, may as well emit a
repeated one and so be it. (Probably no one will ever call that function
outside of maybe test code anyway.)
While I'm here, remove the 0 constraint too. It's not likely to change, but
removing the return value overload seems easier than keeping comments about it
comments about it.
Change-Id: I01d36dba1855873875bb5a0ec84b040199e0e9bc
Reviewed-on: https://boringssl-review.googlesource.com/2844
Reviewed-by: Adam Langley <agl@google.com>
We only implement four curves (P-224, P-256, P-384, and P-521) and only
advertise the latter three by default. Don't maintain entries corresponding to
all the unimplemented curves.
Change-Id: I1816a10c6f849ca1d9d896bc6f4b64cd6b329481
Reviewed-on: https://boringssl-review.googlesource.com/2843
Reviewed-by: Adam Langley <agl@google.com>
They both happen to be zero, but OBJ_undef is a type error; OBJ_foo expands to
a comma-separated list of integers.
Change-Id: Ia5907dd3bc83240b7cc98af6456115d2efb48687
Reviewed-on: https://boringssl-review.googlesource.com/2842
Reviewed-by: Adam Langley <agl@google.com>
Add some missing headers and ensure each header has a short description. doc.go
gets confused at declarations that break before the first (, so avoid doing
that. Also skip a/an/deprecated: in markupFirstWord and process pipe words in
the table of contents.
Change-Id: Ia08ec5ae8e496dd617e377e154eeea74f4abf435
Reviewed-on: https://boringssl-review.googlesource.com/2839
Reviewed-by: Adam Langley <agl@google.com>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
(Imported from upstream's 4f605ccb779e32a770093d687e0554e0bbb137d3)
More state that should be systematically reset across handshakes. Add a reset
on the ServerHello end too since that was missed.
Change-Id: Ibb4549acddfd87caf7b6ff853e2adbfa4b7e7856
Reviewed-on: https://boringssl-review.googlesource.com/2838
Reviewed-by: Adam Langley <agl@google.com>
According to X6.90 null, object identifier, boolean, integer and enumerated
types can only have primitive encodings: return an error if any of
these are received with a constructed encoding.
(Imported from upstream's 89f40f369f414b52e00f7230b0e3ce99e430a508.)
Change-Id: Ia5d15eef72e379119f50fdbac4e92c4761bf5eaf
Reviewed-on: https://boringssl-review.googlesource.com/2835
Reviewed-by: Adam Langley <agl@google.com>
write_quota should only be decremented by 1 in datagram mode, otherwise we'll
underflow and always allow writes through. This does not cause any existing
tests to fail.
(It will be useful once the bug in dtls1_do_write is fixed.)
Change-Id: I42aa001d7264790a3726269890635f679497fb1c
Reviewed-on: https://boringssl-review.googlesource.com/2831
Reviewed-by: Adam Langley <agl@google.com>
The existing comments are not very helpful. This code is also quite buggy.
Document two of them as TODOs.
Change-Id: Idfaf93d9c3b8b1ee92f2fb0d292ef513b5f6d824
Reviewed-on: https://boringssl-review.googlesource.com/2830
Reviewed-by: Adam Langley <agl@google.com>
BIO_ctrls do not have terribly well-defined return values on error. (Though the
existing ones seem to all return 0, not -1, on nonexistant operation.)
Change-Id: I08497f023ce3257c253aa71517a98b2fe73c3f74
Reviewed-on: https://boringssl-review.googlesource.com/2829
Reviewed-by: Adam Langley <agl@google.com>
g_probably_mtu and dtls1_guess_mtu is a bunch of logic for guessing the right
MTU, but it only ever returns the maximum (the input is always zero). Trim that
down to only what it actually does.
Change-Id: If3afe3f68ccb36cbf9c4525372564d16a4bbb73f
Reviewed-on: https://boringssl-review.googlesource.com/2828
Reviewed-by: Adam Langley <agl@google.com>
The retry doesn't actually work when we're sending a non-initial fragment; the
s->init_off != 0 block will get re-run each iteration through and continually
prepend headers. It can also infinite loop if the BIO reports
BIO_CTRL_DGRAM_MTU_EXCEEDED but either fails to report an MTU or reports an MTU
that always rounds up to the minimum. See upstream's
d3d9eef31661633f5b003a9e115c1822f79d1870.
WebRTC doesn't participate in any of the MTU logic and inherits the default
MTU, so just remove it for now.
Change-Id: Ib2ed2ba016b7c229811741fb7369c015ba0b551f
Reviewed-on: https://boringssl-review.googlesource.com/2827
Reviewed-by: Adam Langley <agl@google.com>
That setting means that the MTU is provided externally via SSL_set_mtu.
(Imported from upstream's 001235778a6e9c645dc0507cad6092d99c9af8f5)
Change-Id: I4e5743a9dee734ddd0235f080aefe98a7365aaf6
Reviewed-on: https://boringssl-review.googlesource.com/2826
Reviewed-by: Adam Langley <agl@google.com>
Based in part on upstream's cf75017bfd60333ff65edf9840001cd2c49870a3. This
situation really shouldn't be able to happen, but between no static asserts
that the minimum MTU is always large enough and a bug in reseting the MTU later
(to be fixed be a follow-up import from upstream), check these and return a
useful error code.
Change-Id: Ie853e5d35a6a7bc9c0032e74ae71529d490f4fe2
Reviewed-on: https://boringssl-review.googlesource.com/2825
Reviewed-by: Adam Langley <agl@google.com>
BoringSSL currently retransmits non-deterministically on an internal timer
(rather than one supplied externally), so the tests currently fail flakily
depending on timing. Valgrind is a common source for this. We still assume an
in-order and reliable channel, but drop retransmits silently:
- Handshake messages may arrive with old sequence numbers.
- Retransmitted CCS records arrive from the previous epoch.
- We may receive a retransmitted Finished after we believe the handshake has
completed. (Aside: even in a real implementation, only Finished is possible
here. Even with out-of-order delivery, retransmitted or reordered messages
earlier in the handshake come in under a different epoch.)
Note that because DTLS renego and a Finished retransmit are ambiguous at the
record layer[*], this precludes us writing tests for DTLS renego. But DTLS
renego should get removed anyway. As BoringSSL currently implements renego,
this ambiguity is also a source of complexity in the real implementation. (See
the SSL3_MT_FINISHED check in dtls1_read_bytes.)
[*] As a further fun aside, it's also complex if dispatching renego vs Finished
after handshake message reassembly. The spec doesn't directly say the sequence
number is reset across renegos, but it says "The first message each side
transmits in /each/ handshake always has message_seq = 0". This means that such
an implementation needs the handshake message reassembly logic be aware that a
Finished fragment with high sequence number is NOT an out-of-order fragment for
the next handshake.
Change-Id: I35d13560f82bcb5eeda62f4de1571d28c818cc36
Reviewed-on: https://boringssl-review.googlesource.com/2770
Reviewed-by: Adam Langley <agl@google.com>
As of our 82b7da271f, an SSL_SESSION created
externally always has a cipher set. Unknown ciphers are rejected early. Prior
to that, an SSL_SESSION would only have a valid cipher or valid cipher_id
depending on whether it came from an internal or external session cache.
See upstream's 6a8afe2201cd888e472e44225d3c9ca5fae1ca62 and
c566205319beeaa196e247400c7eb0c16388372b for more context.
Since we don't get ourselves into this strange situation and s->cipher is now
always valid for established SSL_SESSION objects (the existence of
unestablished SSL_SESSION objects during a handshake is awkward, but something
to deal with later), do away with s->cipher_id altogether. An application
should be able to handle failing to parse an SSL_SESSION instead of parsing it
successfuly but rejecting all resumptions.
Change-Id: I2f064a815e0db657b109c7c9269ac6c726d1ffed
Reviewed-on: https://boringssl-review.googlesource.com/2703
Reviewed-by: Adam Langley <agl@google.com>
Test that SSLv3 accepts arbitrary padding bytes (hello, POODLE) and rejects
non-minimal padding, while TLS accepts non-minimal padding but rejects
arbitrary padding bytes.
Also test what happens when the MAC is correct, but there is no padding. This
is the case that triggers a failing padding_ok check after the MAC check
on padding_len = 0 passes.
Change-Id: Ia1444c526437899fc57ceafcbcef9c8f5cb9a6c5
Reviewed-on: https://boringssl-review.googlesource.com/2702
Reviewed-by: Adam Langley <agl@google.com>
Now that BoringSSL no longer uses it internally, deprecate it until we can get
any Google code off it and remove it altogether.
Change-Id: I0e15525600b27a65f84b4bb820b879b2424a0ef7
Reviewed-on: https://boringssl-review.googlesource.com/2701
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
This introduces another knob into SSL_AEAD_CTX to omit the version from the ad
parameter. It also allows us to fold a few more SSL3_ENC_METHOD hooks together.
Change-Id: I6540d410d4722f734093554fb434dab6e5217d4f
Reviewed-on: https://boringssl-review.googlesource.com/2698
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
Fix up the generate_master_secret parameter while we're here.
Change-Id: I1c80796d1f481be0c3eefcf3222f2d9fc1de4a51
Reviewed-on: https://boringssl-review.googlesource.com/2696
Reviewed-by: Adam Langley <agl@google.com>
size_t all the parameters. Also explicitly label label as label. This is in
preparation for pulling the PRF out into SSL3_ENC_METHOD so more of the
SSL3_ENC_METHOD hooks may be shared between SSLv3 and TLS once SSLv3 uses
stateful AEADs.
Also port away from EVP_PKEY_HMAC and use HMAC_CTX directly. The abstraction
doesn't buy much and is different from all the other EVP_DigestSign* functions.
There are few enough users within BoringSSL and Google that we can probably
deprecate and eventually remove it altogether.
Change-Id: I5d4529438c8a2a992fc199388a0c9e73bd6d2e06
Reviewed-on: https://boringssl-review.googlesource.com/2695
Reviewed-by: Adam Langley <agl@google.com>
HMAC_CTX_copy's documentation is off. It actually follows the old copy
functions which call FOO_init on dest first. Notably this means that they leak
memory if dest is currently in use.
Add HMAC_CTX_copy_ex as an analog of EVP_MD_CTX_copy and deprecate
HMAC_CTX_copy. (EVP_CIPHER_CTX_copy, in contrast, was correct from the start.)
Change-Id: I48566c858663d3f659bd356200cf862e196576c9
Reviewed-on: https://boringssl-review.googlesource.com/2694
Reviewed-by: Adam Langley <agl@google.com>
CBC modes in SSLv3 are bust already with POODLE and we're moving away from it.
Align all the names from 'ssl3' and 'tls1' to 'tls', to match the names of the
TLS-only AEADs.
Change-Id: If742296a8e2633ef42a484e4d873b4a83558b6aa
Reviewed-on: https://boringssl-review.googlesource.com/2693
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
These helper functions will be used in the implementation of the legacy CBC
mode AEADs. The file is copied as-is and then modified to remove the dependency
on ssl/. Notably explicit IV logic is removed (that's a side effect of how
explicit IVs are currently implemented) and the padding length is returned
directly rather than smuggled into rec->type.
(Diffing tls_cbc.c and s3_cbc.c is probably the easiest for a review.)
The helpers are currently unused.
Change-Id: Ib703f4d3620196c9f2921cb3b8bf985f2d1777db
Reviewed-on: https://boringssl-review.googlesource.com/2691
Reviewed-by: Adam Langley <agl@google.com>
It's not worth saving the extra mallocs. This is preparation for moving SSLv3
to stateful AEADs; it'll share code TLS's SSL3_ENC_METHOD, but
tls1_generate_key_block is different, so that'll be pulled out into its own
hook.
Change-Id: I3f2136600758465c66ce23736041bb47f74efa6d
Reviewed-on: https://boringssl-review.googlesource.com/2690
Reviewed-by: Adam Langley <agl@google.com>
The extra free in ex_data_impl.c is fixing a mistake: when calling
|CRYPTO_cleanup_all_ex_data| the |EX_CLASS_ITEM| itself wouldn't be
freed.
The change in err_impl.c is to free the thread-id hash also. This allows
programs to free absolutely all memory allocated by BoringSSL, which
allows fuzz testing to find any memory leaks.
Change-Id: I1e518adf2b3e0efa7d7f00f7ab4e65e1dc70161e
Reviewed-on: https://boringssl-review.googlesource.com/2670
Reviewed-by: Adam Langley <agl@google.com>
More modern versions of GCC (at least with aarch64) are warning about an
unused value in these locations. It's incorrect, but I guess that the
macro is confusing it.
Using a (void) tag is a little ugly but solves the problem.
Change-Id: If6ba5083ab6e501c81e7743ae1ed99a89565e57c
Reviewed-on: https://boringssl-review.googlesource.com/2810
Reviewed-by: Adam Langley <agl@google.com>
We aren't targeting pure C89 any longer and it also upsets GCC on
AArch64 because asm() isn't part of C89.
Change-Id: I0ba299160e2f0c40d9a99ea8df13b4bb33c08163
Reviewed-on: https://boringssl-review.googlesource.com/2800
Reviewed-by: Adam Langley <agl@google.com>
The minimum MTU (not consistently enforced) is just under 256, so it's
difficult to test everything, but this is a basic test. (E.g., without renego,
the only handshake message with encryption is Finished which fits in the MTU.)
It tests the server side because the Certificate message is large enough to
require fragmentation.
Change-Id: Ida11f1057cebae2b800ad13696f98bb3a7fbbc5e
Reviewed-on: https://boringssl-review.googlesource.com/2824
Reviewed-by: Adam Langley <agl@google.com>
This should have been removed with its dtls1_clear cousin in
8c88153465.
Change-Id: Ibf4ee67348f603285b26766568cbb92183b62cee
Reviewed-on: https://boringssl-review.googlesource.com/2823
Reviewed-by: Adam Langley <agl@google.com>
State on s3 gets freed in both ssl3_clear and ssl3_free. Considate to just
ssl3_free. This replaces the (SSL,ssl,ssl3)_clear calls in (SSL,ssl,ssl3)_new
with the state that was initialized. This results in a little code duplication
between SSL_new and SSL_clear because state is on the wrong object. I've just
left TODOs for now; some of it will need disentangling.
We're far from it, but going forward, separate state between s and s->s3 as:
- s contains configuration state, DTLS or TLS. It is initialized from SSL_CTX,
configurable directly afterwards, and preserved across SSL_clear calls.
(Including when it's implicitly set as part of a handshake callback.)
- Connection state hangs off s->s3 (TLS) and s->d1 (DTLS). It is reset across
SSL_clear. This should happen naturally out of a ssl_free/ssl_new pair.
The goal is to avoid needing separate initialize and reset code for anything;
the point any particular state is reset is the point its owning context is
destroyed and recreated.
Change-Id: I5d779010778109f8c339c07433a0777feaf94d1f
Reviewed-on: https://boringssl-review.googlesource.com/2822
Reviewed-by: Adam Langley <agl@google.com>
Configuration data inherited from the ctx happens in SSL_new. (This also gets
in the way of using ssl3_free/ssl3_new to implement SSL_clear.)
Change-Id: I2773af91abf4e1edc0c1a324bc1e94088d7c2274
Reviewed-on: https://boringssl-review.googlesource.com/2821
Reviewed-by: Adam Langley <agl@google.com>
DSA_verify and DSA_check_signature didn't share a codepath, so the fix was only
applied to the former. Implement verify in terms of check_signature and add
tests for bad DER variants.
Change-Id: I6577f96b13b57fc89a5308bd8a7c2318defa7ee1
Reviewed-on: https://boringssl-review.googlesource.com/2820
Reviewed-by: Adam Langley <agl@google.com>
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject the
signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the certificate
signature. NB: this will result in signature failure errors for some broken
certificates.
3. Check DSA/ECDSA signatures use DER.
Reencode DSA/ECDSA signatures and compare with the original received signature.
Return an error if there is a mismatch.
This will reject various cases including garbage after signature (thanks to
Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS program for
discovering this case) and use of BER or invalid ASN.1 INTEGERs (negative or
with leading zeroes).
CVE-2014-8275
(Imported from upstream's 85cfc188c06bd046420ae70dd6e302f9efe022a9 and
4c52816d35681c0533c25fdd3abb4b7c6962302d)
Change-Id: Ic901aea8ea6457df27dc542a11c30464561e322b
Reviewed-on: https://boringssl-review.googlesource.com/2783
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A memory leak can occur in dtls1_buffer_record if either of the calls to
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there
is a malloc failure, whilst the latter will fail if attempting to add a
duplicate record to the queue. This should never happen because
duplicate records should be detected and dropped before any attempt to
add them to the queue. Unfortunately records that arrive that are for
the next epoch are not being recorded correctly, and therefore replays
are not being detected. Additionally, these "should not happen" failures
that can occur in dtls1_buffer_record are not being treated as fatal and
therefore an attacker could exploit this by sending repeated replay
records for the next epoch, eventually causing a DoS through memory
exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed
by Matt Caswell from the OpenSSL development team.
CVE-2015-0206
(Imported from upstream's 7c6a3cf2375f5881ef3f3a58ac0fbd0b4663abd1).
Change-Id: I765fe61c75bc295bcc4ab356b8a5ce88c8964764
Reviewed-on: https://boringssl-review.googlesource.com/2782
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Some parts of Android can't be updated yet so this change adds
declarations (only) for some functions that will be stubbed in
Android-specific code. (That Android-specific code will live in the
Android repo, not the BoringSSL repo.)
Trying to use these functions outside of Android will result in a link
error.
Change-Id: Iaa9b956e6408d21cd8fc34d90d9c15657e429877
Reviewed-on: https://boringssl-review.googlesource.com/2760
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Write the array literal of all zeros as {0} rather than {}.
Change-Id: If15330d96d019be671d3bcbbdea60c2b3ecc2128
Reviewed-on: https://boringssl-review.googlesource.com/2740
Reviewed-by: Adam Langley <agl@google.com>
