This allows us to switch TLS 1.3 to use non-cipher based negotiation
without needing to use separate functions between 1.3 and below.
BUG=77
Change-Id: I9207e7a6793cb69e8300e2c15afe3548cbf82af2
Reviewed-on: https://boringssl-review.googlesource.com/10803
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For consistency and to avoid a pedantic GCC warning (even though it's
mostly old legacy code).
Change-Id: Iea63eb0a82ff52914adc33b83e48450f4f6a49ef
Reviewed-on: https://boringssl-review.googlesource.com/11021
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
In OpenSSL, they're used in the 32-bit x86 Blowfish, CAST, DES, and RC5
assembly bits. We don't have any of those.
Change-Id: I36f22ca873842a200323cd3f398d2446f7bbabca
Reviewed-on: https://boringssl-review.googlesource.com/10780
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This simplifies the logic around SSL_clear to reset the state for a new
handshake. The state around here is still a little iffy, but this is a
slight improvement.
The SSL_ST_CONNECT and SSL_ST_ACCEPT states are still kept separate to
avoid problems with the info callback reporting SSL_ST_INIT. Glancing
through info callback consumers, although they're all debugging, they
tend to assume that all intermediate states either have only
SSL_ST_CONNECT set or only SSL_ST_ACCEPT set.
(They also all look identical which makes me think it's copy-and-pasted
from OpenSSL command-line tool or something.)
Change-Id: I55503781e52b51b4ca829256c14de6f5942dae51
Reviewed-on: https://boringssl-review.googlesource.com/10760
Reviewed-by: Adam Langley <agl@google.com>
This mechanism is incompatible with deploying draft versions of TLS 1.3.
Suppose a draft M client talks to a draft N server, M != N. (Either M or
N could also be the final standard revision should there be lingering
draft clients or servers.) The server will notice the mismatch and
pretend ClientHello.version is TLS 1.2, not TLS 1.3. But this will
trigger anti-downgrade signal and cause an interop failure! And if it
doesn't trigger, all the clever tricks around ServerHello.random being
signed in TLS 1.2 are moot.
We'll put this back when the dust has settled.
Change-Id: Ic3cf72b7c31ba91e5cca0cfd7a3fca830c493a43
Reviewed-on: https://boringssl-review.googlesource.com/11005
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The (rather long...) preamble to aead.h still said we allowed this.
Change-Id: I4ba02ef196c6d5439408000cf3c296111b55ff36
Reviewed-on: https://boringssl-review.googlesource.com/11004
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
We need time.h for clock_gettime on Linux. Previously, scoped_types.h
was pulling in everything and getting it for us, but now it doesn't
exist. We seem to have been pulling it in on accident anyway but
it seems Android's system headers end up not doing so.
Change-Id: I0a04495b1462649d77d62018e317c416803ac58d
Reviewed-on: https://boringssl-review.googlesource.com/11000
Reviewed-by: Matt Braithwaite <mab@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I keep wishing we had that available and patching this in.
Change-Id: I4ef04fcc6be5b00a9fcbdc2771a7ee7e2313b5c5
Reviewed-on: https://boringssl-review.googlesource.com/10980
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
(Imported from upstream's 2a20b6d9731488bcb500e58a434375f59fb9adcc)
Change-Id: If3db4dac3d4cd675cf7854c4e154823d25d00eb9
Reviewed-on: https://boringssl-review.googlesource.com/10921
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The compiler complains about:
error: explicit specialization of
'bssl::internal::Deleter<evp_pkey_st>' after instantiation
This is because, although the deleter's operator() is not instantiated
without emitting std::unique_ptr's destructor, the deleter itself *is*.
Deleters are allowed to have non-zero size, so a std::unique_ptr
actually embeds a copy of the deleter, so it needs the size of the
deleter.
As with all problems in computer science, we fix this with a layer of
indirection. Instead of specializing the deleter, we specialize
bssl::internal::DeleterImpl which, when specialized, has a static method
Free. That is only instantiated inside
bssl::internal::Deleter::operator(), giving us the desired properties.
(Did I mention forward decls are terrible? I wish people wouldn't want
them so much.)
Also appease clang-format.
Change-Id: I9a07b2fd13e8bdfbd204e225ac72c52d20a397dc
Reviewed-on: https://boringssl-review.googlesource.com/10964
Reviewed-by: Matt Braithwaite <mab@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
(Imported from upstream's a404656a8b40d9f1172e5e330f7e2d9d87cabab8)
Change-Id: I4ddebfbaeab433bae7c1393a8258d786801bb633
Reviewed-on: https://boringssl-review.googlesource.com/10920
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Not that this matters in the slightest, but the recent IETF mailing
reminded me we don't test this.
Change-Id: I300c96d6a63733d538a7019a7cb74d4e65d0498f
Reviewed-on: https://boringssl-review.googlesource.com/10961
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Although RFC 6066 recommends against it, some servers send a warning
alert prior to ServerHello on SNI mismatch, and, per spec, TLS 1.2
allows it.
We're fine here, but add a test for it. It interacts interestingly with
TLS 1.3 forbidding warning alerts because it happens before version
negotiation.
Change-Id: I0032313c986c835b6ae1aa43da6ee0dad17a97c2
Reviewed-on: https://boringssl-review.googlesource.com/10800
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It lacks std::unique_ptr, despite some consumers using it with C++11 in
the compiler enabled.
Change-Id: Icc79ac4f2385440b36aa6b01b1477abcfa8a9388
Reviewed-on: https://boringssl-review.googlesource.com/10841
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Now that we have the extern "C++" trick, we can just embed them in the
normal headers. Move the EVP_CIPHER_CTX deleter to cipher.h and, in
doing so, take away a little bit of boilerplate in defining deleters.
Change-Id: I4a4b8d0db5274a3607914d94e76a38996bd611ec
Reviewed-on: https://boringssl-review.googlesource.com/10804
Reviewed-by: Matt Braithwaite <mab@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It was switched to using the callbacks, but the callbacks require
SSL_SESS_CACHE_CLIENT be set.
(We should possibly just stop conditioning the callback on that bit
since it doesn't do anything.)
Change-Id: I96277b8a75975a86393260a6291eafc9cb2c6a78
Reviewed-on: https://boringssl-review.googlesource.com/10805
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I431c6e5b8f7de4663ba3db52f6fe0062caaf88ba
Reviewed-on: https://boringssl-review.googlesource.com/10820
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I00507014c55b2c7fd442a5aa2c3afcbf8c48049b
Reviewed-on: https://boringssl-review.googlesource.com/10741
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Unlike the Scoped* types, bssl::UniquePtr is available to C++ users, and
offered for a large variety of types. The 'extern "C++"' trick is used
to make the C++ bits digestible to C callers that wrap header files in
'extern "C"'.
Change-Id: Ifbca4c2997d6628e33028c7d7620c72aff0f862e
Reviewed-on: https://boringssl-review.googlesource.com/10521
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ieee80e5949e7f5cda77a643bae8fb1c521eb3587
Reviewed-on: https://boringssl-review.googlesource.com/10762
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Add a test that RSA-PSS is available in TLS 1.2 by default, both for
signing and verifying. Note that if a custom SSL_PRIVATE_KEY_METHOD is
used and it sets signing preferences, it won't use RSA-PSS if it doesn't
know about it. (See *-Sign-Negotiate-* tests.)
Change-Id: I3776a0c95480188a135795f7ebf31f2b0e0626cc
Reviewed-on: https://boringssl-review.googlesource.com/10723
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The early callback needs to run before even version negotiation has been
resolved.
Change-Id: Ibb449ccec07dedef19b7827400ef318fa2f422c0
Reviewed-on: https://boringssl-review.googlesource.com/10722
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
These test vectors include the k value, so we can get a deterministic
test.
Change-Id: Ie3cb61a99203cd55b01f4835be7c32043309748d
Reviewed-on: https://boringssl-review.googlesource.com/10701
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Changing parameters on renegotiation makes all our APIs confusing. This
one has no reason to change, so lock it down. In particular, our
preference to forbid Token Binding + renego may be overridden at the
IETF, even though it's insane. Loosening it will be a bit less of a
headache if EMS can't change.
https://www.ietf.org/mail-archive/web/unbearable/current/msg00690.html
claims that this is already in the specification and enforced by NSS. I
can't find anything to this effect in the specification. It just says
the client MUST disable renegotiation when EMS is missing, which is
wishful thinking. At a glance, NSS doesn't seem to check, though I could
be misunderstanding the code.
Nonetheless, locking this down is a good idea anyway. Accurate or not,
take the email as an implicit endorsement of this from Mozilla.
Change-Id: I236b05991d28bed199763dcf2f47bbfb9d0322d7
Reviewed-on: https://boringssl-review.googlesource.com/10721
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This removes all but the generic C RC4 implementation. At this point we
want to optimize for size/simplicity rather than speed.
See also upstream's 3e9e810f2e047effb1056211794d2d12ec2b04e7 which
removed the RC4_CHUNK code and standardized on RC4_INDEX. A
since-removed comment says that it was implemented for "pre-21164a Alpha
CPUs don't have byte load/store instructions" and helps with SPARC and
MIPS.
This also removes all the manual loop unrolling.
Change-Id: I91135568483260b2e1e675f190fb00ce8f9eff3d
Reviewed-on: https://boringssl-review.googlesource.com/10720
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This and the following commits will import NIST's ECC test vectors.
Right now all our tests pass if I make P-224 act like P-521, which is
kind of embarrassing. (Other curves are actually tested, but only
because runner.go tests them against BoGo.)
Change-Id: Id0b20451ebd5f10f1d09765a810ad140bea28fa0
Reviewed-on: https://boringssl-review.googlesource.com/10700
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I85216184f9277ce0c0caae31e379b638683e28c5
Reviewed-on: https://boringssl-review.googlesource.com/10703
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
For now, they can be restored by compiling with -DBORINGSSL_RC4_TLS.
Of note, this means that `MEDIUM' is now empty.
Change-Id: Ic77308e7bd4849bdb2b4882c6b34af85089fe3cc
Reviewed-on: https://boringssl-review.googlesource.com/10580
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Matt Braithwaite <mab@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Matt Braithwaite <mab@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Somehow I didn't notice these used i2d_ASN1_bytes and
d2i_ASN1_type_bytes when removing those. Fortunately the macros are also
removable so drop them too.
Change-Id: I2a7b198eab2d3811e5ced1f347597185b4697f8d
Reviewed-on: https://boringssl-review.googlesource.com/10660
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We may need to implement high tag number form someday. CBS_get_asn1 has
an unsigned output to allow for this, but CBB_add_asn1 takes a uint8_t
(I think this might be my fault). Fix that which also fixes a
-Wconversion warning.
Simply leaving room in tag representation will still cause troubles
because the class and constructed bits overlap with bits for tag numbers
above 31. Probably the cleanest option would be to shift them to the top
3 bits of a u32 and thus not quite match the DER representation. Then
CBS_get_asn1 and CBB_add_asn1 will internally munge that into the DER
representation and consumers may continue to write things like:
tag_number | CBS_ASN1_CONTEXT_SPECIFIC
I haven't done that here, but in preparation for that, document that
consumers need to use the values and should refrain from assuming the
correspond to DER.
Change-Id: Ibc76e51f0bc3b843e48e89adddfe2eaba4843d12
Reviewed-on: https://boringssl-review.googlesource.com/10502
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
If code tries to inspect the verify result in the case of a failure then
it seems reasonable that the error code should be in there.
Change-Id: Ic32ac9d340c2c10a405a7b6580f22a06427f041d
Reviewed-on: https://boringssl-review.googlesource.com/10641
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Some, very recent, versions of Clang now support `.arch`. Allow them to
see these directives with BORINGSSL_CLANG_SUPPORTS_DOT_ARCH.
BUG=39
Change-Id: I122ab4b3d5f14502ffe0c6e006950dc64abf0201
Reviewed-on: https://boringssl-review.googlesource.com/10600
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
4aa154e08f changed the code to assume that
a session callback will zero the |copy| out-arg before returning NULL.
In practice this doesn't always happen and we should be robust against
it.
Change-Id: I0fd14969df836e0fa4f68ded8648fea8094ff9d7
Reviewed-on: https://boringssl-review.googlesource.com/10640
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
To ease the removal of RC4, use 3DES in cases where RC4 is not required,
but is just a placeholder for "ciphersuite that works in SSLv3."
Change-Id: Ib459173e68a662986235b556f330a7e0e02759d7
Reviewed-on: https://boringssl-review.googlesource.com/10523
Commit-Queue: Matt Braithwaite <mab@google.com>
Reviewed-by: Matt Braithwaite <mab@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
nginx consumes these error codes without #ifdefs. Continue to define
them for compatibility, even though we never emit them.
BUG=95
Change-Id: I1e991987ce25fc4952cc85b98ffa050a8beab92e
Reviewed-on: https://boringssl-review.googlesource.com/10446
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
peer_sigalgs should live on SSL_HANDSHAKE. This both releases a little
bit of memory after the handshake is over and also avoids the bug where
the sigalgs get dropped if SSL_set_SSL_CTX is called at a bad time. See
also upstream's 14e14bf6964965d02ce89805d9de867f000095aa.
This only affects consumers using the old SNI callback and not
select_certificate_cb.
Add a test that the SNI callback works as expected. In doing so, add an
SSL_CTX version of the signing preferences API. This is a property of
the cert/key pair (really just the key) and should be tied to that. This
makes it a bit easier to have the regression test work with TLS 1.2 too.
I thought we'd fixed this already, but apparently not... :-/
BUG=95
Change-Id: I75b02fad4059e6aa46c3b05183a07d72880711b3
Reviewed-on: https://boringssl-review.googlesource.com/10445
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
958aaf1ea1, imported from upstream, had an
off-by-one error. Reproducing the failure is fairly easy as it can't
even serialize 1. See also upstream's
099e2968ed3c7d256cda048995626664082b1b30.
Rewrite the function completely with CBB and add a basic test.
BUG=chromium:639740
Change-Id: I41a91514c4bb9e83854824ed5258ffe4e49d9491
Reviewed-on: https://boringssl-review.googlesource.com/10540
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
None of these extensions may be negotiated in TLS 1.3 and are otherwise
on by default. Make the future QUIC/TLS1.3 ClientHello a hair smaller.
Change-Id: I613c339d95470676c78f21fd29e888b7701692c6
Reviewed-on: https://boringssl-review.googlesource.com/10504
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Apparently we forgot to do this.
Change-Id: I348cf6d716ae888fddce69ba4801bf09446f5a72
Reviewed-on: https://boringssl-review.googlesource.com/10503
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Chromium has switched to better APIs.
Change-Id: I26209b3a03c6a0db1ddce2f1fc99c8750cf6e56a
Reviewed-on: https://boringssl-review.googlesource.com/10501
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ie60744761f5aa434a71a998f5ca98a8f8b1c25d5
Reviewed-on: https://boringssl-review.googlesource.com/10447
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I'll hold on regenerating the transcripts until either the protocol has
stablized more or we're ready to start actually deploying some of this,
but we can get this in now.
Confirmed these #ifdef points are covered by tests:
- BadFinished-*-TLS13
- *-InvalidSignature-*-TLS13
BUG=79
Change-Id: I5f6b9d0f50ac33d5cc79688928fb3fdf6df845ae
Reviewed-on: https://boringssl-review.googlesource.com/10500
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
However, for now, we will only enable it if TLS 1.3 is offered.
BUG=85
Change-Id: I958ae0adeafee553dbffb966a6fa41f8a81cef96
Reviewed-on: https://boringssl-review.googlesource.com/10342
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Having two copies of this is confusing. This field is inherently tied to
the certificate chain, which lives on SSL_SESSION, so this should live
there too. This also wasn't getting reset correctly on SSL_clear, but
this is now resolved.
Change-Id: I22b1734a93320bb0bf0dc31faa74d77a8e1de906
Reviewed-on: https://boringssl-review.googlesource.com/10283
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
As documented by OpenSSL, it does not interact with session resumption
correctly:
https://www.openssl.org/docs/manmaster/ssl/SSL_set_verify_result.html
Sadly, netty-tcnative calls it, but we should be able to get them to
take it out because it doesn't do anything. Two of the three calls are
immediately after SSL_new. In OpenSSL and BoringSSL as of the previous
commit, this does nothing.
The final call is in verify_callback (see SSL_set_verify). This callback
is called in X509_verify_cert by way of X509_STORE_CTX_set_verify_cb.
As soon as X509_verify_cert returns, ssl->verify_result is clobbered
anyway, so it doesn't do anything.
Within OpenSSL, it's used in testdane.c. As far as I can tell, it does
not actually do a handshake and just uses this function to fake having
done one. (Regardless, we don't need to build against that.)
This is done in preparation for removing ssl->verify_result in favor of
session->verify_result.
Change-Id: I7e32d7f26c44f70136c72e58be05a3a43e62582b
Reviewed-on: https://boringssl-review.googlesource.com/10485
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
