This adds the machinery for doing TLS 1.3 1RTT.
Change-Id: I736921ffe9dc6f6e64a08a836df6bb166d20f504
Reviewed-on: https://boringssl-review.googlesource.com/8720
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is the equivalent of FragmentAcrossChangeCipherSuite for DTLS. It
is possible for us to, while receiving pre-CCS handshake messages, to
buffer up a message with sequence number meant for a post-CCS Finished.
When we then get to the new epoch and attempt to read the Finished, we
will process the buffered Finished although it was sent with the wrong
encryption.
Move ssl_set_{read,write}_state to SSL_PROTOCOL_METHOD hooks as this is
a property of the transport. Notably, read_state may fail. In DTLS
check the handshake buffer size. We could place this check in
read_change_cipher_spec, but TLS 1.3 has no ChangeCipherSpec message, so
we will need to implement this at the cipher change point anyway. (For
now, there is only an assert on the TLS side. This will be replaced with
a proper check in TLS 1.3.)
Change-Id: Ia52b0b81e7db53e9ed2d4f6d334a1cce13e93297
Reviewed-on: https://boringssl-review.googlesource.com/8790
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For now, skip the 1.2 -> 1.1 signal since that will affect shipping
code. We may as well enable it too, but wait until things have settled
down. This implements the version in draft-14 since draft-13's isn't
backwards-compatible.
Change-Id: I46be43e6f4c5203eb4ae006d1c6a2fe7d7a949ec
Reviewed-on: https://boringssl-review.googlesource.com/8724
Reviewed-by: David Benjamin <davidben@google.com>
Rather than blindly select SHA-1 if we can't find a matching one, act as
if the peer advertised rsa_pkcs1_sha1 and ecdsa_sha1. This means that we
will fail the handshake if no common algorithm may be found.
This is done in preparation for removing the SHA-1 default in TLS 1.3.
Change-Id: I3584947909d3d6988b940f9404044cace265b20d
Reviewed-on: https://boringssl-review.googlesource.com/8695
Reviewed-by: David Benjamin <davidben@google.com>
In order to delay the digest of the handshake transcript and unify
around message-based signing callbacks, a copy of the transcript is kept
around until we are sure there is no certificate authentication.
This removes support for SSL_PRIVATE_KEY_METHOD as a client in SSL 3.0.
Change-Id: If8999a19ca021b4ff439319ab91e2cd2103caa64
Reviewed-on: https://boringssl-review.googlesource.com/8561
Reviewed-by: David Benjamin <davidben@google.com>
This also adds a missing check to the C half to ensure fake record types are
always correct, to keep implementations honest.
Change-Id: I1d65272e647ffa67018c721d52c639f8ba47d647
Reviewed-on: https://boringssl-review.googlesource.com/8510
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The case where ec_group_get_mont_data is NULL is only for arbitrary groups
which we now require to be prime order. BN_mod_exp_mont is fine with a NULL
BN_MONT_CTX. It will just compute it. Saves a bit of special-casing.
Also don't mark p-2 as BN_FLG_CONSTTIME as the exponent is public anyway.
Change-Id: Ie868576d52fc9ae5f5c9f2a4039a729151bf84c7
Reviewed-on: https://boringssl-review.googlesource.com/8307
Reviewed-by: Adam Langley <agl@google.com>
There's a __pragma expression which allows this. Android builds us Windows with
MinGW for some reason, so we actually do have to tolerate non-MSVC-compatible
Windows compilers. (Clang for Windows is much more sensible than MinGW and
intentionally mimicks MSVC.)
MinGW doesn't understand MSVC's pragmas and warns a lot. #pragma warning is
safe to suppress, so wrap those to shush them. This also lets us do away with a
few ifdefs.
Change-Id: I1f5a8bec4940d4b2d947c4c1cc9341bc15ec4972
Reviewed-on: https://boringssl-review.googlesource.com/8236
Reviewed-by: Adam Langley <agl@google.com>
Windows SRWLOCK requires you call different functions here. Split
them up in preparation for switching Windows from CRITICAL_SECTION.
BUG=37
Change-Id: I7b5c6a98eab9ae5bb0734b805cfa1ff334918f35
Reviewed-on: https://boringssl-review.googlesource.com/8080
Reviewed-by: Adam Langley <agl@google.com>
Also add a test.
This is the last of the openssl/asn1.h includes from the directories that are
to be kept in the core libcrypto library. (What remains is to finish sorting
out the crypto/obj stuff. We'll also want to retain a decoupled version of the
PKCS#12 stuff.)
Functions that need to be audited for reuse:
i2d_DHparams
BUG=54
Change-Id: Ibef030a98d3a93ae26e8e56869f14858ec75601b
Reviewed-on: https://boringssl-review.googlesource.com/7900
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Sanity check field lengths and sums to avoid potential overflows and reject
excessively large X509_NAME structures.
Issue reported by Guido Vranken.
(Imported from upstream's 9b08619cb45e75541809b1154c90e1a00450e537.)
Change-Id: Ib2e1e7cd086f9c3f0d689d61947f8ec3e9220049
Reviewed-on: https://boringssl-review.googlesource.com/7842
Reviewed-by: Adam Langley <agl@google.com>
I don't think I ever look at that output. This way our builds are nice and
silent.
Change-Id: Idb215e3702f530a8b8661622c726093530885c91
Reviewed-on: https://boringssl-review.googlesource.com/7700
Reviewed-by: Adam Langley <agl@google.com>
I messed up a few of these.
ASN1_R_UNSUPPORTED_ALGORITHM doesn't exist. X509_R_UNSUPPORTED_ALGORITHM does
exist as part of X509_PUBKEY_set, but the SPKI parser doesn't emit this. (I
don't mind the legacy code having really weird errors, but since EVP is now
limited to things we like, let's try to keep that clean.) To avoid churn in
Conscrypt, we'll keep defining X509_R_UNSUPPORTED_ALGORITHM, but not actually
do anything with it anymore. Conscrypt was already aware of
EVP_R_UNSUPPORTED_ALGORITHM, so this should be fine. (I don't expect
EVP_R_UNSUPPORTED_ALGORITHM to go away. The SPKI parsers we like live in EVP
now.)
A few other ASN1_R_* values didn't quite match upstream, so make those match
again. Finally, I got some of the rsa_pss.c values wrong. Each of those
corresponds to an (overly specific) RSA_R_* value in upstream. However, those
were gone in BoringSSL since even the initial commit. We placed the RSA <-> EVP
glue in crypto/evp (so crypto/rsa wouldn't depend on crypto/evp) while upstream
placed them in crypto/rsa.
Since no one seemed to notice the loss of RSA_R_INVALID_SALT_LENGTH, let's undo
all the cross-module errors inserted in crypto/rsa. Instead, since that kind of
specificity is not useful, funnel it all into X509_R_INVALID_PSS_PARAMETERS
(formerly EVP_R_INVALID_PSS_PARAMETERS, formerly RSA_R_INVALID_PSS_PARAMETERS).
Reset the error codes for all affected modules.
(That our error code story means error codes are not stable across this kind of
refactoring is kind of a problem. Hopefully this will be the last of it.)
Change-Id: Ibfb3a0ac340bfc777bc7de6980ef3ddf0a8c84bc
Reviewed-on: https://boringssl-review.googlesource.com/7458
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
People seem to condition on these a lot. Since this code has now been moved
twice, just make them all cross-module errors rather than leave a trail of
renamed error codes in our wake.
Change-Id: Iea18ab3d320f03cf29a64a27acca119768c4115c
Reviewed-on: https://boringssl-review.googlesource.com/7431
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
A number of values have fallen off now that code's been shuffled
around.
Change-Id: I5eac1d3fa4a9335c6aa72b9876d37bb9a9a029ac
Reviewed-on: https://boringssl-review.googlesource.com/7029
Reviewed-by: Adam Langley <agl@google.com>
All the signature algorithm logic depends on X509_ALGOR. This also
removes the X509_ALGOR-based EVP functions which are no longer used
externally. I think those APIs were a mistake on my part. The use in
Chromium was unnecessary (and has since been removed anyway). The new
X.509 stack will want to process the signatureAlgorithm itself to be
able to enforce policies on it.
This also moves the RSA_PSS_PARAMS bits to crypto/x509 from crypto/rsa.
That struct is also tied to crypto/x509. Any new RSA-PSS code would
have to use something else anyway.
BUG=499653
Change-Id: I6c4b4573b2800a2e0f863d35df94d048864b7c41
Reviewed-on: https://boringssl-review.googlesource.com/7025
Reviewed-by: Adam Langley <agl@google.com>
Calling SSL_shutdown while in init previously gave a "1" response,
meaning everything was successfully closed down (even though it
wasn't). Better is to send our close_notify, but fail when trying to
receive one.
The problem with doing a shutdown while in the middle of a handshake
is that once our close_notify is sent we shouldn't really do anything
else (including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS
before acting on our close_notify - so we won't be able to read it
because we're not acting on CCS messages!
(Imported from upstream's f73c737c7ac908c5d6407c419769123392a3b0a9)
Change-Id: Iaad5c5e38983456d3697c955522a89919628024b
Reviewed-on: https://boringssl-review.googlesource.com/7207
Reviewed-by: David Benjamin <davidben@google.com>
Many consumers need SPKI support (X.509, TLS, QUIC, WebCrypto), each
with different ways to set signature parameters. SPKIs themselves can
get complex with id-RSASSA-PSS keys which come with various constraints
in the key parameters. This suggests we want a common in-library
representation of an SPKI.
This adds two new functions EVP_parse_public_key and
EVP_marshal_public_key which converts EVP_PKEY to and from SPKI and
implements X509_PUBKEY functions with them. EVP_PKEY seems to have been
intended to be able to express the supported SPKI types with
full-fidelity, so these APIs will continue this.
This means future support for id-RSASSA-PSS would *not* repurpose
EVP_PKEY_RSA. I'm worried about code assuming EVP_PKEY_RSA implies
acting on the RSA* is legal. Instead, it'd add an EVP_PKEY_RSA_PSS and
the data pointer would be some (exposed, so the caller may still check
key size, etc.) RSA_PSS_KEY struct. Internally, the EVP_PKEY_CTX
implementation would enforce the key constraints. If RSA_PSS_KEY would
later need its own API, that code would move there, but that seems
unlikely.
Ideally we'd have a 1:1 correspondence with key OID, although we may
have to fudge things if mistakes happen in standardization. (Whether or
not X.509 reuses id-ecPublicKey for Ed25519, we'll give it a separate
EVP_PKEY type.)
DSA parsing hooks are still implemented, missing parameters and all for
now. This isn't any worse than before.
Decoupling from the giant crypto/obj OID table will be a later task.
BUG=522228
Change-Id: I0e3964edf20cb795a18b0991d17e5ca8bce3e28c
Reviewed-on: https://boringssl-review.googlesource.com/6861
Reviewed-by: Adam Langley <agl@google.com>
Functions which lose object reuse and need auditing:
- d2i_ECParameters
- d2i_ECPrivateKey
This adds a handful of bytestring-based APIs to handle EC key
serialization. Deprecate all the old serialization APIs. Notes:
- An EC_KEY has additional state that controls its encoding, enc_flags
and conv_form. conv_form is left alone, but enc_flags in the new API
is an explicit parameter.
- d2i_ECPrivateKey interpreted its T** argument unlike nearly every
other d2i function. This is an explicit EC_GROUP parameter in the new
function.
- The new specified curve code is much stricter and should parse enough
to uniquely identify the curve.
- I've not bothered with a new version of i2d_ECParameters. It just
writes an OID. This may change later when decoupling from the giant
OID table.
- Likewise, I've not bothered with new APIs for the public key since the
EC_POINT APIs should suffice.
- Previously, d2i_ECPrivateKey would not call EC_KEY_check_key and it
was possible for the imported public and private key to mismatch. It
now calls it.
BUG=499653
Change-Id: I30b4dd2841ae76c56ab0e1808360b2628dee0615
Reviewed-on: https://boringssl-review.googlesource.com/6859
Reviewed-by: Adam Langley <agl@google.com>
There was a TODO to remove it once asn1_mac.h was trimmed. This has now
happened. Remove it and reset error codes for crypto/asn1.
Change-Id: Iaf2f3e75741914415372939471b135618910f95d
Reviewed-on: https://boringssl-review.googlesource.com/6761
Reviewed-by: Adam Langley <agl@google.com>
38 error codes have fallen off the list since the last time we did this.
Change-Id: Id7ee30889a5da2f6ab66957fd8e49e97640c8489
Reviewed-on: https://boringssl-review.googlesource.com/6643
Reviewed-by: Adam Langley <agl@google.com>
dh.c had a 10k-bit limit but it wasn't quite correctly enforced. However,
that's still 1.12s of jank on the IO thread, which is too long. Since the SSL
code consumes DHE groups from the network, it should be responsible for
enforcing what sanity it needs on them.
Costs of various bit lengths on 2013 Macbook Air:
1024 - 1.4ms
2048 - 14ms
3072 - 24ms
4096 - 55ms
5000 - 160ms
10000 - 1.12s
UMA says that DHE groups are 0.2% 4096-bit and otherwise are 5.5% 2048-bit and
94% 1024-bit and some noise. Set the limit to 4096-bit to be conservative,
although that's already quite a lot of jank.
BUG=554295
Change-Id: I8e167748a67e4e1adfb62d73dfff094abfa7d215
Reviewed-on: https://boringssl-review.googlesource.com/6464
Reviewed-by: Adam Langley <agl@google.com>
Removing the function codes continued to sample __func__ for compatibility with
ERR_print_errors_cb, but not ERR_error_string_n. We can just emit
OPENSSL_internal for both. ERR_print_errors_cb already has the file and line
number available which is strictly more information than the function name.
(ERR_error_string_n does not, but we'd already turned that to
OPENSSL_internal.)
This shaves 100kb from a release build of the bssl tool.
In doing so, put an unused function code parameter back into ERR_put_error to
align with OpenSSL. We don't need to pass an additional string in anymore, so
OpenSSL compatibility with anything which uses ERR_LIB_USER or
ERR_get_next_error_library costs nothing. (Not that we need it.)
Change-Id: If6af34628319ade4145190b6f30a0d820e00b20d
Reviewed-on: https://boringssl-review.googlesource.com/6387
Reviewed-by: Adam Langley <agl@google.com>
It's very annoying having to remember the right incant every time I want
to switch around between my build, build-release, build-asan, etc.,
output directories.
Unfortunately, this target is pretty unfriendly without CMake 3.2+ (and
Ninja 1.5+). This combination gives a USES_TERMINAL flag to
add_custom_target which uses Ninja's "console" pool, otherwise the
output buffering gets in the way. Ubuntu LTS is still on an older CMake,
so do a version check in the meantime.
CMake also has its own test mechanism (CTest), but this doesn't use it.
It seems to prefer knowing what all the tests are and then tries to do
its own output management and parallelizing and such. We already have
our own runners. all_tests.go could actually be converted tidily, but
generate_build_files.py also needs to read it, and runner.go has very
specific needs.
Naming the target ninja -C build test would be nice, but CTest squats
that name and CMake grumps when you use a reserved name, so I've gone
with run_tests.
Change-Id: Ibd20ebd50febe1b4e91bb19921f3bbbd9fbcf66c
Reviewed-on: https://boringssl-review.googlesource.com/6270
Reviewed-by: Adam Langley <alangley@gmail.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
MSVC and clang-cl automatically define |_WIN32| but |WIN32| is only
defined if a Windows header file has been included or if -DWIN32 was
passed on the command line. Thus, it is always better to test |_WIN32|
than |WIN32|. The convention in BoringSSL is to test |OPENSSL_WINDOWS|
instead, except for the place where |OPENSSL_WINDOWS| is defined.
Change-Id: Icf3e03958895be32efe800e689d5ed6a2fed215f
Reviewed-on: https://boringssl-review.googlesource.com/5553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
Consumers sometimes use ERR_LIB_USER + <favorite number> instead of
ERR_get_next_error_library. To avoid causing them grief, keep ERR_LIB_USER
last.
Change-Id: Id19ae7836c41d5b156044bd20d417daf643bdda2
Reviewed-on: https://boringssl-review.googlesource.com/5290
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
This is the first structure to be implemented with the new BIGNUM ASN.1
routines. Object reuse in the legacy d2i/i2d functions is implemented by
releasing whatever was in *out before and setting it to the
newly-allocated object. As with the new d2i_SSL_SESSION, this is a
weaker form of object reuse, but should suffice for reasonable callers.
As ECDSA_SIG is more likely to be parsed alone than as part of another
structure (and using CBB is slightly tedious), add convenient functions
which take byte arrays. For consistency with SSL_SESSION, they are named
to/from_bytes. from_bytes, unlike the CBS variant, rejects trailing
data.
Note this changes some test expectations: BER signatures now push an
error code. That they didn't do this was probably a mistake.
BUG=499653
Change-Id: I9ec74db53e70d9a989412cc9e2b599be0454caec
Reviewed-on: https://boringssl-review.googlesource.com/5269
Reviewed-by: Adam Langley <agl@google.com>
RSA and ECDSA will both require being able to convert ASN.1 INTEGERs to
and from DER. Don't bother handling negative BIGNUMs for now. It doesn't
seem necessary and saves bothering with two's-complement vs
sign-and-magnitude.
BUG=499653
Change-Id: I1e80052067ed528809493af73b04f82539d564ff
Reviewed-on: https://boringssl-review.googlesource.com/5268
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
Platform crypto APIs for PKCS#1 RSA signatures vary between expecting the
caller to prepend the DigestInfo prefix (RSA_sign_raw) and prepending it
internally (RSA_sign). Currently, Chromium implements sign or sign_raw as
appropriate. To avoid needing both variants, the new asynchronous methods will
only expose the higher-level one, sign.
To satisfy ports which previously implemented sign_raw, expose the DigestInfo
prefix as a utility function.
BUG=347404
Change-Id: I04c397b5e9502b2942f6698ecf81662a3c9282e6
Reviewed-on: https://boringssl-review.googlesource.com/4940
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
(Imported from upstream's 7cc18d8158b5fc2676393d99b51c30c135502107.)
Change-Id: Ib9f5e410a46df3d7f02a61374807fba209612bd3
Reviewed-on: https://boringssl-review.googlesource.com/4892
Reviewed-by: Adam Langley <agl@google.com>
This isn't exhaustive. There are still failures in some tests which probably
ought to get C++'d first.
Change-Id: Iac58df9d98cdfd94603d54374a531b2559df64c3
Reviewed-on: https://boringssl-review.googlesource.com/4795
Reviewed-by: Adam Langley <agl@google.com>
Currently far from passing and I haven't even tried with a leak checker yet.
Also bn_test is slow.
Change-Id: I4fe2783aa5f7897839ca846062ae7e4a367d2469
Reviewed-on: https://boringssl-review.googlesource.com/4794
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
This change exposes the functions needed to support arbitrary elliptic
curve groups. The Java API[1] doesn't allow a provider to only provide
certain elliptic curve groups. So if BoringSSL is an ECC provider on
Android, we probably need to support arbitrary groups because someone
out there is going to be using it for Bitcoin I'm sure.
Perhaps in time we can remove this support, but not yet.
[1] https://docs.oracle.com/javase/7/docs/api/java/security/spec/ECParameterSpec.html
Change-Id: Ic1d76de96f913c9ca33c46b451cddc08c5b93d80
Reviewed-on: https://boringssl-review.googlesource.com/4740
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
It's only called for client certificates with NULL. The interaction with
extra_certs is more obvious if we handle that case externally. (We
shouldn't attach extra_certs if there is no leaf.)
Change-Id: I9dc26f32f582be8c48a4da9aae0ceee8741813dc
Reviewed-on: https://boringssl-review.googlesource.com/4613
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
This is taken from upstream, although it originally came from us. This
will only take effect on 64-bit systems (x86-64 and aarch64).
Before:
Did 1496 ECDH P-256 operations in 1038743us (1440.2 ops/sec)
Did 2783 ECDSA P-256 signing operations in 1081006us (2574.5 ops/sec)
Did 2400 ECDSA P-256 verify operations in 1059508us (2265.2 ops/sec)
After:
Did 4147 ECDH P-256 operations in 1061723us (3905.9 ops/sec)
Did 9372 ECDSA P-256 signing operations in 1040589us (9006.4 ops/sec)
Did 4114 ECDSA P-256 verify operations in 1063478us (3868.4 ops/sec)
Change-Id: I11fabb03239cc3a7c4a97325ed4e4c97421f91a9
This is never used and we can make the built-in one performant.
Change-Id: I6fc7639ba852349933789e73762bc3fa1341b2ff
Reviewed-on: https://boringssl-review.googlesource.com/4370
Reviewed-by: Adam Langley <agl@google.com>
Beyond generally eliminating unnecessary includes, eliminate as many
includes of headers that declare/define particularly error-prone
functionality like strlen, malloc, and free. crypto/err/internal.h was
added to remove the dependency on openssl/thread.h from the public
openssl/err.h header. The include of <stdlib.h> in openssl/mem.h was
retained since it defines OPENSSL_malloc and friends as macros around
the stdlib.h functions. The public x509.h, x509v3.h, and ssl.h headers
were not changed in order to minimize breakage of source compatibility
with external code.
Change-Id: I0d264b73ad0a720587774430b2ab8f8275960329
Reviewed-on: https://boringssl-review.googlesource.com/4220
Reviewed-by: Adam Langley <agl@google.com>
A previous change in BoringSSL renamed ERR_print_errors_fp to
BIO_print_errors_fp as part of refactoring the code to improve the
layering of modules within BoringSSL. Rename it back for better
compatibility with code that was using the function under the original
name. Move its definition back to crypto/err using an implementation
that avoids depending on crypto/bio.
Change-Id: Iee7703bb1eb4a3d640aff6485712bea71d7c1052
Reviewed-on: https://boringssl-review.googlesource.com/4310
Reviewed-by: Adam Langley <agl@google.com>
Now that ERR is using thread-local storage, there's very little that the
THREADID code is doing and it can be turned into stub functions.
Change-Id: I668613fec39b26c894d029b10a8173c3055f6019
Since ERR will soon have thread-local storage, we don't need to worry
about high-performance implementations and thus don't need to be able to
switch two different implementations at run-time.
Change-Id: I0598054ee8a8b499ac686ea635a96f5d03c754e0
Sadly, it turns out that we have need of this, at least for now. The
code is taken from upstream and changed only as much as needed.
This only imports keys and doesn't know how to actually perform
operations on them for now.
Change-Id: I0db70fb938186cb7a91d03f068b386c59ed90b84
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
Also check for overflow, although it really shouldn't happen.
Change-Id: I34dfe8eaf635aeaa8bef2656fda3cd0bad7e1268
Reviewed-on: https://boringssl-review.googlesource.com/4235
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf1101, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
MinGW on Linux needs lowercase include files. On Windows this doesn't
matter since the filesystems are case-insensitive, but building
BoringSSL on Linux with MinGW has case-sensitive filesystems.
Change-Id: Id9c120d819071b041341fbb978352812d6d073bc
Reviewed-on: https://boringssl-review.googlesource.com/4090
Reviewed-by: Adam Langley <agl@google.com>
This is the only EVP_PKEY ctrl hook which returns something other than a
boolean.
Change-Id: Ic226aef168abdf72e5d30e8264a559ed5039a055
Reviewed-on: https://boringssl-review.googlesource.com/3873
Reviewed-by: Adam Langley <agl@google.com>
This removes another place where we're internally sensitive to the
success/failure conditions.
Change-Id: I18fecf6457e841ba0afb718397b9b5fd3bbdfe4c
Reviewed-on: https://boringssl-review.googlesource.com/3872
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
This avoids cluttering up the diff and making merge conflicts a pain. It does,
however, mean we need to generate err_data.c ahead of time in Chromium and
likely other downstream builds. It also adds a build dependency on Go.
Change-Id: I6e0513ed9f50cfb030f7a523ea28519590977104
Reviewed-on: https://boringssl-review.googlesource.com/3790
Reviewed-by: Adam Langley <agl@google.com>
Instead, add a separate init_with_direction hook. Normal AEADs ignore the
direction, while legacy AEADs must be initialized with it. This avoids
maintaining extra state to support the delayed initialization.
Change-Id: I25271f0e56ee2783a2fd4d4026434154d58dc0a8
Reviewed-on: https://boringssl-review.googlesource.com/3731
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7b6acc9004beb7b7090de1837814ccdff2e9930e
Reviewed-on: https://boringssl-review.googlesource.com/3680
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
Some files in crypto/x509 were moved from crypto/asn1, so they emit errors from
another module. Fix make_errors.go to account for this: cross module errors
must use the foreign module as the first argument to OPENSSL_PUT_ERROR. Both
the function code and the error code should be declared in the foreign module.
Update make_errors.go to ignore cross-module error lines when deciding which
function tokens to emit.
Change-Id: Ic38377ddd56e22d033ef91318c30510762f6445d
Reviewed-on: https://boringssl-review.googlesource.com/3383
Reviewed-by: Adam Langley <agl@google.com>
Otherwise running git grep for a single function gives a ton of noise.
Change-Id: I18900d6269fd2be39ef9b579419aee1c7eca9143
Reviewed-on: https://boringssl-review.googlesource.com/3382
Reviewed-by: Adam Langley <agl@google.com>
Sort all the files before processing them.
Change-Id: Id6b4519fa22f1770bb2ba2a792f5c27de9ea452d
Reviewed-on: https://boringssl-review.googlesource.com/3380
Reviewed-by: Adam Langley <agl@google.com>
Also, Clang doesn't like static asserts with the same message and
ERR_free_strings should still free the error queues, although it's badly
misnamed now.
Change-Id: Ibff8eb50f93c0b56c3eeb17a300e8501a31c3ab8
Reviewed-on: https://boringssl-review.googlesource.com/3370
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This avoids a conflict with the Chromium build system, which
defines WIN32_LEAN_AND_MEAN with a different value.
BUG=crbug.com/453196
Change-Id: Ia15ec7c20325c1961af4f32e5208266e5f846f35
Reviewed-on: https://boringssl-review.googlesource.com/3150
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Define WIN32_LEAN_AND_MEAN before including Windows Platform SDK
headers to preempt naming conflicts and to make the build faster. Avoid
including those headers in BoringSSL headers. Document that Platform
SDK 8.1 or later is required on Windows.
Change-Id: I907ada21dc722527ea37e839c71c5157455a7003
Reviewed-on: https://boringssl-review.googlesource.com/3100
Reviewed-by: Adam Langley <agl@google.com>
As feared, 2bca0988 did cause some leak checkers to get upset about the
state_hash pointer getting cleared.
This change makes err_shutdown free all the error queues to try and
avoid this. Hopefully this doesn't upset TSAN in turn.
BUG=448296
Change-Id: I827da63c793dcabc73168ece052cdcd3d3cc64e3
Reviewed-on: https://boringssl-review.googlesource.com/2890
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The extra free in ex_data_impl.c is fixing a mistake: when calling
|CRYPTO_cleanup_all_ex_data| the |EX_CLASS_ITEM| itself wouldn't be
freed.
The change in err_impl.c is to free the thread-id hash also. This allows
programs to free absolutely all memory allocated by BoringSSL, which
allows fuzz testing to find any memory leaks.
Change-Id: I1e518adf2b3e0efa7d7f00f7ab4e65e1dc70161e
Reviewed-on: https://boringssl-review.googlesource.com/2670
Reviewed-by: Adam Langley <agl@google.com>
ERR_get_error returns the least recent error, not the most recent error.
Nothing in err_test was actually asserting on that.
Change-Id: Ia49e29c231de4bbec77d037860ad1ffa8cce4779
Reviewed-on: https://boringssl-review.googlesource.com/2750
Reviewed-by: Adam Langley <agl@google.com>
