With the previous DTLS change, the dispatch layer only cares about the
end of the handshake to know when to drop the current message. TLS 1.3
post-handshake messages will need a similar hook, so convert it to this
lower-level one.
BUG=83
Change-Id: I4c8c3ba55ba793afa065bf261a7bccac8816c348
Reviewed-on: https://boringssl-review.googlesource.com/8989
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is in preparation for switching finish_handshake to a
release_current_message hook. finish_handshake in DTLS is also
responsible for releasing any memory associated with extra messages in
the handshake.
Except that's not right and we need to make it an error anyway. Given
that the rest of the DTLS dispatch layer already strongly assumes there
is only one message in epoch one, putting the check in the fragment
processing works fine enough. Add tests for this.
This will certainly need revising when DTLS 1.3 happens (perhaps just a
version check, perhaps bringing finish_handshake back as a function that
can fail... which means we need a state just before SSL_ST_OK), but DTLS
1.3 post-handshake messages haven't really been written down, so let's
do the easy thing for now and add a test for when it gets more
interesting.
This removes the sequence number reset in the DTLS code. That reset
never did anything becase we don't and never will renego. We should make
sure DTLS 1.3 does not bring the reset back for post-handshake stuff.
(It was wrong in 1.2 too. Penultimate-flight retransmits and renego
requests are ambiguous in DTLS.)
BUG=83
Change-Id: I33d645a8550f73e74606030b9815fdac0c9fb682
Reviewed-on: https://boringssl-review.googlesource.com/8988
Reviewed-by: Adam Langley <agl@google.com>
This was only used so we knew when we had a current message to discard
and when we didn't. With init_msg being tracked better, we can use that
instead.
As part of this, switch the V2ClientHello hack to not using
reuse_message. Otherwise we have to fill in init_msg and friends in two
places.
The next change will require that we have a better handle on the "is
there a current message" boolean.
BUG=83
Change-Id: I917efacbad10806d492bbe51eda74c0779084d60
Reviewed-on: https://boringssl-review.googlesource.com/8987
Reviewed-by: Adam Langley <agl@google.com>
Somewhat clearer what it's for than just 4.
Change-Id: Ie7bb89ccdce188d61741da203acd624b49b69058
Reviewed-on: https://boringssl-review.googlesource.com/8986
Reviewed-by: Adam Langley <agl@google.com>
For TLS 1.3, we will need to process more complex post-handshake
messages. It is simplest if we use the same mechanism. In preparation,
allow ssl3_get_message to be called at any point.
Note that this stops reserving SSL3_RT_MAX_PLAIN_LENGTH in init_buf
right off the bat. Instead it will grow as-needed to accomodate the
handshake. SSL3_RT_MAX_PLAIN_LENGTH is rather larger than we probably
need to receive, particularly as a server, so this seems a good plan.
BUG=83
Change-Id: Id7f4024afc4c8a713b46b0d1625432315594350e
Reviewed-on: https://boringssl-review.googlesource.com/8985
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Right now they're RSA PRIVATE KEY or EC PRIVATE KEY which requires a bit
more effort to parse. It means the PEM header is necessary to parse
these. OpenSSL and Go automagically convert the format, but other shims
(namely NSS) may not.
Change-Id: I9fa2767dcf1fe6ceeea546390759e1c364a8f16f
Reviewed-on: https://boringssl-review.googlesource.com/9020
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I6d552d26b3d72f6fffdc4d4d9fc3b5d82fb4e8bb
Reviewed-on: https://boringssl-review.googlesource.com/9010
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This API needs to be improved but, for the time being, keep the
invariant reasonable.
Change-Id: If94d41e7e7936e44de5ecb36da45f89f80df7784
Reviewed-on: https://boringssl-review.googlesource.com/8984
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Implemented in preparation for testing the C implementation. Tested
against itself.
BUG=74
Change-Id: Iec1b9ad22e09711fa4e67c97cc3eb257585c3ae5
Reviewed-on: https://boringssl-review.googlesource.com/8873
Reviewed-by: Nick Harper <nharper@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Fermat's Little Theorem is already used for the custom curve implementations.
Use it, for the same reasons, for the ec_montgomery-based implementations.
I tested the performance (only) on x86-64 Windows.
Change-Id: Ibf770fd3f2d3e2cfe69f06bc12c81171624ff557
Reviewed-on: https://boringssl-review.googlesource.com/8924
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Zero is only a valid input to or output of |BN_mod_inverse| when the
modulus is one. |BN_MONT_CTX_set| actually depends on this, so test
that this works.
Change-Id: Ic18f1fe786f668394951d4309020c6ead95e5e28
Reviewed-on: https://boringssl-review.googlesource.com/8922
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We still don't do anything useful with them, but we know not to put them
in the session ticket field.
In doing so, fix a bug in the CorruptTicket option where it would crash
if tickets are exactly 40 byets in length.
BUG=75
Change-Id: Id1039a58ed314a67d0af4f2c7e0617987c2bd6b5
Reviewed-on: https://boringssl-review.googlesource.com/8872
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Also parse out the ticket lifetime which was previously ignored.
BUG=75
Change-Id: I6ba92017bd4f1b31da55fd85d2af529fd592de11
Reviewed-on: https://boringssl-review.googlesource.com/8871
Reviewed-by: Nick Harper <nharper@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We have no intention of implementing FFDHE and the DHE ciphers currently
don't work in the 1.3 handshake anyway. Cipher suite negotiation is to
be refactored in the spec so these cipher values won't be used for FFDHE
anyway.
Change-Id: I51547761d70a397dc3dd0391b71db98189f1a844
Reviewed-on: https://boringssl-review.googlesource.com/8874
Reviewed-by: Nick Harper <nharper@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Some gerrit git hook says this is necessary.
Change-Id: I8a7a0a0e6732688c965b43824fe54b2db79a4919
Reviewed-on: https://boringssl-review.googlesource.com/8990
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change allows the shim to return a magic error code (89) to
indicate that it doesn't implement some of the given flags for a test.
Unimplemented tests are, by default, an error. The --allow-unimplemented
flag to the test runner causes them to be ignored.
This is done in preparation for non-BoringSSL shims.
Change-Id: Iecfd545b9cf44df5e25b719bfd06275c8149311a
Reviewed-on: https://boringssl-review.googlesource.com/8970
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
|BN_mod_inverse| is expensive and leaky. In this case, we can avoid
it completely by taking advantage of the fact that we already have
the two values that are supposed to be inverses of each other.
Change-Id: I2230b4166fb9d89c7445f9f7c045a4c9e4c377b3
Reviewed-on: https://boringssl-review.googlesource.com/8925
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Besides reducing code duplication, also move the relative location of
the check of |count|. Previously, the code was generating a random
value and then terminating the loop without using it if |count| went
to zero. Now the wasted call to |BN_rand| is not made.
Also add a note about the applicability of the special case logic for
|range| of the form |0b100...| to RSA blinding.
Change-Id: Iaa33b9529f1665ac59aefcc8b371fa32445e7578
Reviewed-on: https://boringssl-review.googlesource.com/8960
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
One less random environment variable for us to be sensitive to. (We
should probably unwind all this proxy cert stuff. I don't believe they
are ever enabled.)
Change-Id: I74993178679ea49e60c81d8416e502cbebf02ec9
Reviewed-on: https://boringssl-review.googlesource.com/8948
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
(Imported from upstream's a9b23465243b6d692bb0b419bdbe0b1f5a849e9c,
5e102f96eb6fcdba1db2dba41132f92fa492aea0, and
9bda72880113b2b2262d290b23bdd1d3b19ff5b3.)
Change-Id: Ib608acb86cc128cacf20811c21bf6b38b0520106
Reviewed-on: https://boringssl-review.googlesource.com/8944
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
tag2nbyte had -1 at 18th position, but underlying ASN1_mbstring_copy
supports NumericString. tag2nbyte is also used in do_print_ex which will
not be broken by setting 1 at 18th position of tag2nbyte
(Imported from upstream's bd598cc405e981de259a07558e600b5a9ef64bd6.)
Change-Id: Ie063afcaac8a7d5046cdb385059b991b92cd6659
Reviewed-on: https://boringssl-review.googlesource.com/8946
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
WebRTC want to be able to send a random alert. Add an API for this.
Change-Id: Id3113d68f25748729fd9e9a91dbbfa93eead12c3
Reviewed-on: https://boringssl-review.googlesource.com/8950
Reviewed-by: Taylor Brandstetter <deadbeef@webrtc.org>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The selector field could be omitted because it has a DEFAULT value.
In this case *sfld == NULL (sfld can never be NULL). This was not
noticed because this was never used in existing ASN.1 modules.
(Imported from upstream's c4210673313482edacede58d92e92c213d7a181a.)
svaldez and I stared at this for a while and we believe this change is
correct. It's also irrelevant because our only remaining ADB (ANY
DEFINED BY) table is POLICYQUALINFO which does not allow its selector to
be omitted. Also, if it did, it would be a slight change in behavior.
We'd switch from using POLICYQUALINFO's default_tt (filling in an
ASN1_ANY) to its null_tt (which doesn't exist, so error).
Change-Id: If6a929e3dafca18431775b01958d0dae1c09f3b4
Reviewed-on: https://boringssl-review.googlesource.com/8943
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This imports upstream's b62e9bf5cbbe278b7e0017c9234999dae68ee867 and
c3bc7f498815b355533d96b54b9a09e030d4130c. This is a no-op since we don't
use the XTS bits though keep the files in sync so long as we have them.
Comparing to master, we're now up-to-date on that file except for
a285992763f3961f69a8d86bf7dfff020a08cef9. (I've left that alone since
that touches lots of files and we should probably get better test
configuration before importing something scary like #undef __thumb2__.)
Change-Id: Ie0556757c954ef559e03a6d62c940d5901ca704a
Reviewed-on: https://boringssl-review.googlesource.com/8945
Reviewed-by: Adam Langley <agl@google.com>
All other CBB_add_u<N> functions take a narrowed type, but not every
uint32_t may fit in a u24. Check for this rather than silently truncate.
Change-Id: I23879ad0f4d2934f257e39e795cf93c6e3e878bf
Reviewed-on: https://boringssl-review.googlesource.com/8940
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This can be reverted, once the test runner on Android devices is
fixed.
BUG=chromium:631462
Change-Id: I1f9e38b4104f18c15bb942207c87e3b4b27472d2
Reviewed-on: https://boringssl-review.googlesource.com/8931
Reviewed-by: Andrii Shyshkalov <tandrii@google.com>
It's only called in one place. The comment about stack-allocated BIOs no
longer applies.
Change-Id: I5a3cec30bcb46bf1ee2bffd6117485383520b314
Reviewed-on: https://boringssl-review.googlesource.com/8902
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Ridiculous as it is, the protocol does not forbid packing HelloRequest
and Finished into the same record. Add a test for this case.
Change-Id: I8e1455b261f56169309070bf44d14d40a63eae50
Reviewed-on: https://boringssl-review.googlesource.com/8901
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I5afb917ff151a1cd19cb03152348b5e2eb774e55
Reviewed-on: https://boringssl-review.googlesource.com/8884
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This doesn't do anything since they're for DTLS, but we ought to satisfy
the API nonetheless. expect_flight is easy with
ssl_hs_flush_and_read_message. received_flight I think basically needs
to get sprinkled into the state machine.
Change-Id: I406c7f776ad8e5e3cbcafcac6b26a688c6d3caf1
Reviewed-on: https://boringssl-review.googlesource.com/8883
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
It used to give a sensible answer ("no") before version negotiation.
Change-Id: I85b778a48cca7a4b66a81384eb18c447982875d1
Reviewed-on: https://boringssl-review.googlesource.com/8900
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Alas, we will need a version fallback for TLS 1.3 again.
This deprecates SSL_MODE_SEND_FALLBACK_SCSV. Rather than supplying a
boolean, have BoringSSL be aware of the real maximum version so we can
change the TLS 1.3 anti-downgrade logic to kick in, even when
max_version is set to 1.2.
The fallback version replaces the maximum version when it is set for
almost all purposes, except for downgrade protection purposes.
BUG=chromium:630165
Change-Id: I4c841dcbc6e55a282b223dfe169ac89c83c8a01f
Reviewed-on: https://boringssl-review.googlesource.com/8882
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
BN_mod_mul_montgomery has a problem where the modulus is much smaller
than one of the arguments. While bn_test.cc knows this and reduces the
inputs before testing |BN_mod_mul_montgomery|, none of the previous test
vectors actually failed without this. (Except those that passed negative
vaules.)
This change adds tests where M ≪ A and B.
Change-Id: I53b5188ea5fb5e48d0d197718ed33c644cde8477
Reviewed-on: https://boringssl-review.googlesource.com/8890
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Brian Smith <brian@briansmith.org>
Commit-Queue: David Benjamin <davidben@google.com>
The Android build system uses "blueprint" files now which are
represented by "Android.bp" instead of "Android.mk" files.
Some of the old sources.mk entries still exist, since they're still
being used by the Trusty build system.
Change-Id: I0b04100ace8599c8734bee77f656aab04c06cce9
Reviewed-on: https://boringssl-review.googlesource.com/8891
Reviewed-by: David Benjamin <davidben@google.com>
It seems risky in the context of cross-signed certificates when the
same certificate might have multiple potential issuers. Also rarely
used, since chains in OpenSSL typically only employ self-signed
trust-anchors, whose self-signatures are not checked, while untrusted
certificates are generally ephemeral.
(Imported from upstream's 0e76014e584ba78ef1d6ecb4572391ef61c4fb51.)
This is in master and not 1.0.2, but having a per-certificate signature
cache when this is a function of signature and issuer seems dubious at
best. Thanks to Viktor Dukhovni for pointing this change out to me.
(And for making the original change upstream, of course.)
Change-Id: Ie692d651726f14aeba6eaab03ac918fcaedb4eeb
Reviewed-on: https://boringssl-review.googlesource.com/8880
Reviewed-by: Adam Langley <agl@google.com>
We try to keep the deprecated values hidden, but if we do that, we won't
be able to allocate new constants without knowing which collide.
Change-Id: I3f249639bdf8869b2c83f3efdadd98b63ed839be
Reviewed-on: https://boringssl-review.googlesource.com/8881
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It really should take a few more parameters and save a bit of
long-winded initialization work.
Change-Id: I2823f0aa82be39914a156323f6f32b470b6d6a3b
Reviewed-on: https://boringssl-review.googlesource.com/8876
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
[Tests added by davidben.]
Change-Id: I0d54a4f8b8fe91b348ff22658d95340cdb48b089
Reviewed-on: https://boringssl-review.googlesource.com/8850
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I92425d7c72111623ddfbe8391f2d2fa88f101ef3
Reviewed-on: https://boringssl-review.googlesource.com/8818
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Share a bit more of it between TLS 1.2 and 1.3.
Change-Id: I43c9dbf785a3d33db1793cffb0fdbd3af075cc89
Reviewed-on: https://boringssl-review.googlesource.com/8849
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This reverts commit 69f40dff83. I'm not
sure why the CQ didn't catch it while the bots didn't, but I'll look
into it after the QUIC BoF.
Change-Id: Ia187787c86aab082b9cffe0c86c828805dfc212d
Reviewed-on: https://boringssl-review.googlesource.com/8870
Reviewed-by: David Benjamin <davidben@google.com>
We'll need to update it on occasion, but we should not update our
default ClientHello without noticing.
Change-Id: Id9c4734f8e3f8c66b757a82ca123ce949bbcd02e
Reviewed-on: https://boringssl-review.googlesource.com/8845
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ibde837040d2332bc8570589ba5be9b32e774bfcf
Reviewed-on: https://boringssl-review.googlesource.com/8811
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Revert 3f3358ac15. Add documentation
clarifying the misunderstanding that lead to the mistake, and make use
of the recently-added |bn_set_words|.
Change-Id: I58814bace3db3b0b44e2dfe09c44918a4710c621
Reviewed-on: https://boringssl-review.googlesource.com/8831
Reviewed-by: Adam Langley <agl@google.com>
Our CBB patterns do not make it safe to use a CBB after any operation
failed. Suppose one does:
int add_to_cbb(CBB *cbb) {
CBB child;
return CBB_add_u8(cbb, 1) &&
CBB_add_u8_length_prefixed(cbb, &child) &&
CBB_add_u8(&child, 2) &&
/* Flush |cbb| before |child| goes out of scoped. */
CBB_flush(cbb);
}
If one of the earlier operations fails, any attempt to use |cbb| (except
CBB_cleanup) would hit a memory error. Doing this would be a bug anyway,
since the CBB would be in an undefined state anyway (wrote only half my
object), but the memory error is bad manners.
Officially document that using a CBB after failure is illegal and, to
avoid the memory error, set a poison bit on the cbb_buffer_st to prevent
all future operations. In theory we could make failure +
CBB_discard_child work, but this is not very useful and would require a
more complex CBB pattern.
Change-Id: I4303ee1c326785849ce12b5f7aa8bbde6b95d2ec
Reviewed-on: https://boringssl-review.googlesource.com/8840
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
